Smsy_setup and The SLD server connection is inactive

Hi all,
I am trying to use smsy_setup to populate systems in smsy.
when I run the program I get the following error.
Solution Manager 4.0 by the way
The SLD server connection is inactive
    Message no. SCDT_LIS_IF011
Diagnosis
    An error occurred during communication with the System Landscape
    Directory.
Procedure
    Access the SMSY_SETUP transaction to check the connection data for SLD
    in the expert settings.
The expert settings in smsy_setup contain the follwing values.
Write Data Back into SLD
Default CPU Load AC
Multiple SLD Servers
Hide Progress Display
SLD Host             apslm
Namespace in SLD     sld/active
SLD Server Port             50100
SLD User             slddsuser
AC CPU Load Warning Value     65
doe anyone have idea as to what could be wrong?
regards,
Kevin Hill

Hi Sasha,
Are you able to connect to the SLD through the browser via http://server:port/sld
I removed everyhing from the smsy_setup except for the namespace at it works fine now.
Have you entered all the relevant data in sldapicust transaction ?
regards,
Keivn Hill

Similar Messages

SMSY_SETUP: via SLD: "The SLD server connection is inactive"

Hi folks,
setting up the Solman 4.0 and want to replicate our landscape from our System Landscape Directory.
I followed the instructions in SMSY, set the RFCs etc.
- set the user / pw in SLDAPICUST
- in SMST_SETUP, in the expert settings: put the right user (Administrator), host and port of the SLD
I checked customizing with transaction SLDCHECK ->everything ok, except it's coplanming that it cannot find settings for my Solman-client (yellow).
When triggering the Data transfer via SMSY_SETUP, "SLD", I get in the application log this error message:
"The SLD server connection is inactive", (Message no: SCDT_LIS_IF011)
"Access the SMSY_SETUP transaction to check the connection data for SLD in the expert settings"
Has anybody an idea how to "activate" the SLD server connection?
I cannot find anything what I am missing there...
Thanks
Christian

Hello Christian,
Please check the following document in SAP Service Marketplace. It has been designed to tackle with some of the questions on system data exchange between SAP Solution Manager and SLD, with an overview on all required steps and guides as well as some tips and tricks.
It also contains answers on how to proceed when the SLD Server is inactive:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000530282007E, see especially chapter 5. Answers to questions 1 and most probably to question 3 (in current document version on slide 7).
I hope this helps to solve your issues.
Best regards,
Doreen

Solution Manager 3.2: SLD server connection is inactive SCDT_LIS_IF011

Trying to execute an automatic data transfer from SLD to Solution Manager 3.2 with transaction SMSY_SETUP, I have recieved the update log message:
The SLD server connection is inactive
Message no. SCDT_LIS_IF011
SLD Connection Test displayed:
No business system maintained in SLD
--> check data integrity within the SLD
We customized transactions SLDAPICUST,LCRSERVADDR, SMSY_SETUP->Edit->expert setting as requested in SAP documentation and definied technical, system and business landscapes in SLD (SLD server log: no errors found).
Some suggestions how to fix it?

Hello Christine,
due to the fact that we (up to now) have no need for a business landscape, we created one manualy to test if the check would get a bit further then.
We created a business landscape with the following settings:
Technical System: Web AS ABAP
System: <solution manager>
Business System Role: Application System
Related Integration Server: (no integration server defined)
Testing the Connection wit SLDCHECK we got this error message:
23.11.2005                                        Exchange Infrastructure: SLD Connection Test                                               1
Properties of RFC destination SAPSLDAPI
RFC host:        %%RFCSERVER%%
program id:      SAPSLDAPI_J2E
gateway host:    solman32
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server address settings:
host name:   solman32
port number: 50100
Use transaction SLDAPICUST if you wish to maintain the SLD server address
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Testing the SLD API
SLD API ping was successful
Clearing the local SLD cache
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
solman
Calling function LCR_GET_BS_DETAILS
Retrieving data from the SLD server...
Function call returned exception code     5
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations

SLD server connection is inactive SCDT_LIS_IF011

After install and test SLD into XI 3.0, I am trying to customizr a Solution Manager 3.1 to connecto with SLD using SYSM_SETUP. I configure RZ70, SLDAPICUST, and SMSY_SETUP->Edit->expert setting as requested in SAP documentation.
When I try from SMSY_SETUP, Schedule data transfer from lis/SLD, the update log returns a message:
<b>The SLD server connection is inactive
Message no. SCDT_LIS_IF011</b>
When executing SLDCHECK I get all checks with green status except:
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found
=> Check the SLD data content for the current system client
Summary: Some non-fatal exception has occured, but connection to SLD works technically
=> Check and maintain the SLD data content
Checking SLD data content, no error reported found.
Someone have some sugestion how to fix it??

Hello,
We met this problem too.
However, we solved the problem. In our situation, it was becasue the sldapiuser was locked on SLD. The following is our solution.
1. logon to http://<sldhost>/<port>/sld to check the ID and password of the SLD user (e.g sldapiuser)
2. fill in the user and password in /sldapicust
3. go to /smsy_setup Edit<<expert settings and then fill in the same user with the one you have in sldpicust
4. check the SLD connection with /sldcheck
Good luck!
Eddie Teng

SLD server connection is inactive

Hi,
"SLD server connection is inactive is shown" by executing RSGET_SMSY
SLDCHECK -> is ok
SLDAPICUST -> is ok
LCRSERVADDR -> is set
SMSY_SETUP->Edit->expert setting -> testet with all Blank and with serveral user data
SLD is working fine by connecting via http !
We use a Solution Manager 7.1 with SLES 10
Thanks
Steven

Hi,
Could you please check, if the SMSY_SETUP expert settings are empty,
as LANDSCAPE_FETCH uses only SLDAPICUST transaction
for connection data.
Maintaining expert settings at the same time will confuse the job.
Please make sure the alias & primary RFC destination are correctly set,
as well as checking that the user/password combinations are also valid.
Please review SAP Note 757204 regarding the SMSY-SETUP expert settings
empty.
#757204 - SMSY: The connection to the SLD server is inactive
Regards,
Aidan

SLD server has stopped; start the SLD server in Administration

I am trying to configure Technical Systems in SLD (for deploying a webdynpro application which has models). Logged in as Administrator. I see this message when I login from the portal (https://host:port/sld):
"SLD server has stopped; start the SLD server in Administration." And all the links are greyed out.
When I log in to the Visual Admin, services->Sld->and tested the connection (with same ID as Administrator), I see "connection test failed CIMClientObject"
What ID, password should I be using for testing the connection for SLD in visual Admin. Or is this related to ID password at all.
Thanks
Srinivas

Thanks for the replies!
I still have the same problem.
When I select the SLD Data Supplier under services in Visual Admin, I see an error on the task bar at the bottom: SLD_Collector_Task
When I open this item, I see the following error message:
"2008.12.10@10:51:20: HTTP call failed: Failed to send HTTP data: 503 : Service Unavailable. Please check if the target SLD system is available and the SLD bridge is started there"
Is this something related to SLD configuration.
Thanks
Srinivas

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

The lease timeout between avaiability group and the Windows Server Failover Cluster has expired

Hi,
I am having some issues where I get a lease timeout from time to time. I have a Windows 2012 Failover Cluster with 2 nodes and 2 SQL 2012 Always-on Availability Groups. Both nodes
are a physical machines and each node is the primary for an AG.
From what I understand if
the HealhCheckTimeout
is exceeded without the signal exchange the lease is declared 'expired' and the SQL Server resource dll reports that the SQL Server availability group no longer 'looks alive' to the Windows cluster manager. Here are the properties I have setup
which are the default settings:
LeaseTimeout - 20000
HealthCheckTimeout - 30000
VerboseLoging - 0>
FailureConditionLevel – 3
Here are the events that occur in the Application Event Viewer:
Event ID 19407:
The lease between availability group 'AG_NAME' and the Windows Server Failover Cluster has expired. A connectivity issue occurred between the instance of SQL Server and the Windows Server Failover
Cluster. To determine whether the availability group is failing over correctly, check the corresponding availability group resource in the Windows Server Failover Cluster.
Event ID 35285:
The recovery LSN (120881:37533:1) was identified for the database with ID 32. This is an informational message only. No user action is required.
SQl server logs are too long to post in this box but I can send them if you request.
The AG is setup to failover automatically but it did not failover. I am trying to figure out why the lease timed out. Thanks.

From what I've been able to find out, this is due to an issue with the procedure sp_server_diagnostics. It sounds like the cluster is expecting this procedure to regularly log good status "Clean" in the log files, but the procedure is designed not
to flood the logs with "Clean" messages, so only reports changes, and does not make an entry when the last status was "Clean" and the current status is "Clean". The result is that the cluster looks to be unresponsive. However, once it initiates
the failover, the primary machine responds, since it was never really down, and the failover operation stops.
The end result is that there really never is a failover, but the database becomes unavailable for a few minutes while this is resolved.
I'm going to try setting the cluster's failure condition level to 2 (instead of 3) and see if that prevents the down time.
blogs.msdn.com/b/sql_pfe_blog/archive/2013/04/08/sql-2012-alwayson-availability-groups-automatic-failover-doesn-t-occur-or-does-it-a-look-at-the-logs.aspx

Jbuilder 6 and the J2EE server.

I love Jbuilder and I have been using the J2EE Server(Through the Forte Ide) to develop a few J2EE applications. Is it possible to develop and deploy J2EE applications using only Jbuilder6 and the J2EE server.
NB: Applications are for educational purposes.

I'm presently trying to get the Java Pet Store demo
http://interstagedemo.fs.fujitsu.com:8000/petstore/index.jsp
working in JBuilder 7 Enterprise, and I've made at least some headway (some of the JPS 1.3_01 source files aren't in the right subdirectories- per their package declarations- which I've reported to Sun and which they've promised to fix in v1.3_02). JPS works out-of-the-box with the Cloudscape database that's distributed with J2EE v1.3, but at the moment, I can't figure out how to make the JPS connect to Cloudscape through JBuilder.
Borland has their own J2EE server/container, and in fact I just received their 60-day trial on 2 CDs today ("Borland Solution for Java Trial" $19.90 US including shipping; includes JBuilder 7 Enterprise 30-day trial):
http://shop.borland.com/dr/v2/ec_MAIN.Entry10?V1=396710&PN=1&SP=10023&xid=39696&DSP=&CUR=840&PGRP=0&CACHE_ID=0
BES (Borland Enterprise Server) claims to be well-integrated with JBuilder, so it may be a better bet than trying to use the freebie J2EE server, at least to start off with.

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

I just purchased an Apple TV. I have a pc running windows 7. It is connected to a router and the router is connected to a wireless router. I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

I don't mean to be facetious but sometimes the simplest things are overlooked. To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open. It also needs to be on the same network. My network is dual band and works with either stream but a friend of mine does not. He has to set the computer and the Apple TV to the same band. Hope this helps.

My iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, so it means theres something wrong in my iphone.

my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me

Hi jaredfox06,
If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay. To troubleshoot this issue please follow the steps outlined below.
Try these steps first
Make sure that you have the latest software on your iOS device and Apple TV.
Make sure that both devices have Wi-Fi turned on.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network.
If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
On your iOS device, go to Settings > Bluetooth.
On your Apple TV, go to Settings > General > Bluetooth.
If you don't see AirPlay in Control Center
When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
If you don't, try these steps:
Restart your iOS device and Apple TV.
Connect both devices to the same Wi-Fi network.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
Have a good one,
Alex H.

How to bind the java client stub and the C++ server's skeleton?

hi, i'm currently working on a project which a java client invoke a C++ object.
i've wrote the idl and compile it using idl2cpp and a object is created.
then i try to compile my java client using vbjc Client. it was done without errors.
but when i try to run the client (after i run the smart agent and the C++ server) using vbj Client, it promts error which fail to load the class Client.java
and i've try to run my java client using jre (java Client), the program throws exception --> org.omg.CORBA.BAD_PARAM: minor code: 0 completed: No
so, wat's wrong with my codes actually??
it's urgent and i really need you all's help...
thanks a lot...

below is my code:
TimeObject.cpp (C++ server)
#include "TimeImpl.h"
// USE_STD_NS is a define setup by VisiBroker to use the std namespace
USE_STD_NS
int main(int argc, char* const* argv)
try {
// Initialize the ORB.
CORBA::ORB_ptr orb = CORBA::ORB_init(argc, argv);
/* // Initialize the BOA
CORBA::BOA_ptr boa = orb->BOA_init(argc, argv);
// Create the Time object
POA_Time::TimeSetting timesetting = new TimeSettingImpl("My TimeSetting");
// Export the newly created object
boa->obj_is_ready(timesetting);
// Ready to service requests
boa->impl_is_ready(); */
// get a reference to the root POA
CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
PortableServer::POA_var rootPOA = PortableServer::POA::_narrow(obj);
CORBA::PolicyList policies;
policies.length(1);
policies[(CORBA::ULong)0] = rootPOA->create_lifespan_policy(
PortableServer::PERSISTENT);
// get the POA Manager
PortableServer::POAManager_var poa_manager = rootPOA->the_POAManager();
// Create myPOA with the right policies
PortableServer::POA_var myPOA = rootPOA->create_POA("sntp_poa",
poa_manager,
policies);
// Create the servant
TimeSettingImpl timeServant;
// Decide on the ID for the servant
PortableServer::ObjectId_var managerId =
PortableServer::string_to_ObjectId("TimeManager");
// Activate the servant with the ID on myPOA
myPOA->activate_object_with_id(managerId, &timeServant);
// Activate the POA Manager
poa_manager->activate();
CORBA::Object_var reference = myPOA->servant_to_reference(&timeServant);
cout << reference << " is ready" << endl;
// Wait for incoming requests
orb->run();
catch(const CORBA::Exception& e) {
cerr << e << endl;
return 1;
return 0;
Client.java:
import java.net.*;
import java.io.*;
import java.util.*;
import java.lang.*;
public class Client
     public static void main(String args[]) throws IOException, InterruptedException
          try
               // Initialize the ORB
               System.out.println("Initializing the ORB");
               org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init(args, null);
               // Get the manager Id
               byte[] managerId = "TimeManager".getBytes();
               System.out.println("get the manager id");
               // Locate an account manager. Give the full POA name and the servant ID.
               Time.TimeSetting time =
               Time.TimeSettingHelper.bind(orb, "/sntp_poa", managerId);
               System.out.println("bind the object");
               // Bind to the TimeSetting Object
               //System.out.println("Binding to TimeSetting Object");
               //Time.TimeSetting time = Time.TimeSettingHelper.bind(orb, "My TimeSetting");
               SntpClient client = new SntpClient();
               long Offset = client.synchronizeTime();
               // Set offset
               System.out.println("Setting offset to" + Offset);
               time.offset((long)Offset);
               // Set the system time
               System.out.println("Setting system time");
               time.SetTime();
          } catch (org.omg.CORBA.SystemException e)
               System.out.println("System Exception");
               System.err.println(e);

TS1424 error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!

i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!

Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808

Error The PC and the printer are connected to different networks

Hi,
I'm trying to set up my C4580 on my laptop, but I'm getting the following error after the diagnostic test:
The PC and the printer are connected to different networks(237DB2A87D and 66616B65). They must be connected to the same network. This can happen when you use the manufacturer's default network name (SSID) and another nearby network is using the same name.
My setup is a Linksys router WRT546, my laptop is conntected wireless to the router. I have two other desktop computers that are directly connected to the router. Both the desktops are able to connect wireless to the printer. My router SSID name is 'Blair Office' with WPA security.
I get a internet connect fine with the laptop, but can't get the new printer to setup.
I saw another post that talked about 'Print the C45** Network Configuration Page', but not sure how to do this
Thanks
Diane

This reply may be late for this user, but it might be helpful for any current users.
I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
This worked for me after I read several other postings.
Good luck!

Smsy_setup and The SLD server connection is inactive

Similar Messages

Maybe you are looking for