SMSY_SETUP Expert Setting Multiple SLD Servers

Hi
In SMSY_SETUP there is the Expert Setting : Multiple SLD Server which you mark with an X if you want to read from many SLD servers. Can anyone help with how/where to configure which SLD servers to read from? Does it read from SLDAPICUST and if so, is it possible to schedule this read from multiple servers automatically?
Any help appreciated with points.
Thanks
Leigh

Hi there..
In the transaction LCRSERVADDR
You can add another SLD ...remember to maintenance the user/pwd for the new sld in SMSY_SETUP Menu: Goto-->SLD User Maintenance
Good luck..
Wence
http://www.linkedin.com/in/solutionmanager
pd: Tomorrow I upload a SLD Document releated...in http://www.scribd.com/groups/view/10936-sap-solution-manager

Similar Messages

Technical system definitions on multiple SLD servers in a SAP landscape

Hi,
If we want to migrate an SAP SLD server from Solution manager application to ECC application(s). In this process solution manager's SLD server data will be migrated into multiple servers at ECC environment(say for example, we define one SLD server for all development systems and one for Production systems).
Is it required to have all technical systems of SLD servers to be same? (I mean do we have to have all the technical systems defined on Dev SLD server to be available even at PRD SLD server?)
Thanks in advance for all responses.
NetWeaver admin.

Hi,
Yes. If you configured some technical system which reports data to your DEV SLD. And you want same data should be replicated to PRD SLD then you can configure data bridge between DEV SLD and PRD SLD. Then your DEV SLD will replicates its data to PRD SLD.
In order to configure data bridge, you can check below link:
http://help.sap.com/saphelp_nwesrce/helpdata/en/43/da21ba13660aa5e10000000a1553f6/content.htm
Thanks
Sunny

Using Powershell to set Multiple timed.servers with variables

Having an issue using PowerShell to set 3 timed.servers which are defined in a variable. Running the commands: $TimeServers = "IPaddress1,IPaddress2,IPaddress3"Set-NaOption -OptionName timed.servers -OptionValue $TimeServers Thanks in advance!

Hi, The Set-NaOption CmdLet -optionvalue parameter expects a string and it shouldn't matter if that's a comma delimited string containing multiple IP Addresses. I noticed that whilst the cmdlet thows an error it does actually set the option value for all servers so this seems like it could be a bug (IMO). It might be possible to invoke the API using "Invoke-NaSystemApi" but I checked the ZAPI and noticed this also fails using ZExplore from the SDK: ZAPI Request: <?xml version="1.0" encoding="UTF-8"?>
<netapp xmlns="http://www.netapp.com/filer/admin" version="1.21">
<options-set>
    <name>timed.servers</name>
    <value>192.168.100.10,192.168.100.11,192.168.100.12</value>
</options-set>
</netapp> ZAPI Results: <?xml version='1.0' encoding='UTF-8' ?>
<netapp version='1.1' xmlns='http://www.netapp.com/filer/admin'>
    
   <results reason='Unable to set option: timed.servers' errno='13001' status='failed'>
       <cluster-constraint>same_preferred</cluster-constraint>
       <cluster_constraint>same_preferred</cluster_constraint>
       <message>1 entry was deleted.
</message>
   </results>
</netapp> So i think the options are either using the "Set-NaOption" cmdlet with the -SilentlyContinue parameter or the "Invoke-NaSsh" cmdlet with -ErrorAction stop.As a work around i'd recommend something like: [String]$servers = "192.168.100.10,192.168.100.11,192.168.100.12"
[String]$command = "options timed.servers $servers"
Try{
   Invoke-NaSsh -Command $command -ErrorAction Stop
   Write-Host "Executed Command: $command"
}Catch{
   Write-Warning -Message $("Failed Executing Command: $command. Error " + $_.Exception.Message)
} Hope that helps /matt

How to configure multiple RAS servers?

Hi
'Crystal Reports Server Embedded XI R2 - Sizing and Configuration Guide'
It mentions that we can get more license and add the servers in ClientSDKOptions.xml.
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER1:1566</Server>
    <Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER2:1566</Server>
    <Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
I tried this and added ClientSDKOptions.xml file in the web application lib directory
Added that to PATH
Our application uses (Crystal-2008 / rasapp.jar /rascore.jar)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument
When i commented out rcd.setReportAppServer(sn); it is not picking up from the XML file.
I am getting the below error
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
at com.crd.report.crystal.CrystalFile.makeRcd(CrystalFile.java:65)
at com.crd.report.crystal.CrystalReportUtil.makeRcd(CrystalReportUtil.java:892)
Please help me how to set up multiple RAS servers.
Thanks
Sumathi

You are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
If you need more flexibility you may need to get more external IP addresses.

How to configure single web server instance to multiple application servers..

Hi all,
we are running single instance of IWS6.0 SP2 on solaris, we want to comfigure this single instance to multiple application servers(JRun). Can any one advise me whether it is possible to do.
Thanks
Raj

Hi Raj,
"how to configure single web server instance to multiple application servers.."
It's not possible for setting up multiple applicataion servers for Single iWS instance.
Thanks,
Dakshin.

LDAP Authentication Scheme - Multiple LDAP Servers?

How to set up ldap authentication so that multiple ldap servers are available? Scenario: ldap service is replicated through several servers, but does not sit behind a common dns/reverse proxy connection, so applications would list each ldap server and attempt to contact each in order if one or more ldap servers is unreachable.

How to set up ldap authentication so that multiple ldap servers are available? Scenario: ldap service is replicated through several servers, but does not sit behind a common dns/reverse proxy connection, so applications would list each ldap server and attempt to contact each in order if one or more ldap servers is unreachable.

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

ISE Not Identifying AD Group Attributes when using Multiple ISE Servers

So we have multiple ISE Servers with differing personas. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules.
We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are running v1.1.1.268 with the latest two patches.
I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurance nor do we have Smartnet to call support for other reasons. I thought this might be useful to someone who is having the same issue and is unable to figure it out with TAC
-CC

Absolutely. All units said in-sync after setting their personas.
Here is our layout:
ISE-ADM-01 Admin-Primary, Monitoring-Secondary
ISE-ADM-02 Admin-Secondary, Monitoring-Primary
ISE-PDP-01 Policy Only
ISE-PDP-02 Policy Only
I synced one at a time starting with ADM-02. After completing the other two boxes. Active Directory Attribs were pulled down when using them in the Ext Group within my Authz rules.
-CC

Multi Seat Mode - Multiple X Servers on 1 Machine

I need to configure a SunBlade 2000 configured with an XVR1000 graphics board to be used by 2 people simultaneously with the own keyb & mouse.
To summarize :
1 Sun Blade 2000
1 Xvr1000
First Port connected to one monitor /dev/fbs/gfb0a
Second Port Connected to a second monitor /dev/fbs/gfb0b
2 Keyb & 2 mouse connected to the 4 USB ports
The 2 monitors must be handled by to istances of X server (2 dtlogin prompt) so the 2 people can work
indipendently.
I tried the following procedure with NO success.
Does anybody can help me ?
Thanks in advance
Luigi Paganini
=============================================================================
In recent versions of Solaris, the Xsun keyboard & mouse DDX modules
have been extended to support multiple keyboards and mice on Solaris.
The Xorg server on Solaris x86 has similarly been extended to support
multiple mice, but not yet multiple keyboards.
Unfortunately, this is not a very well documented feature, though it is
supported - but you must pay close attention to the configuration
instructions and Limitations described below.
There are currently two choices for configuring X on a machine with
multiple input devices:
* One X server with the extra devices available via the X Input
extension (commonly used for accessibility helper programs, or for x86
laptop users)
* Multiple X servers, each with its own set of input & output
devices ("multi-seat" mode)
The two methods can be mixed on a single machine - when configuring you
simply need to determine which X server each device is going to be
associated with.
Requirements
* Solaris 9 FCS or later (SPARC or x86)
* USB-capable machine
* For Solaris 9, USB patch 115338-01 (sparc)/115339-01 (x86) or
newer. For Solaris 10, s10_17 or newer.
Limitations
Due to the nature of USB and Sun's implementation, USB devices may get
different numbers when initialized or hot-plugged in a different order.
A partial solution is to use the full path name under the /devices
hierarchy - this is tied to the physical port a device is plugged into,
so the order is no longer a problem, but devices must always be plugged
into the same port this way.
Xsun Configuration
The following sections may be added to either
/etc/openwin/server/etc/OWconfig or /usr/openwin/server/etc/OWconfig.
Xsun reads both when starting up and merges their contents.
* 1. Run ls -l /dev/usb/hid* to see what the existing device names are.
* 2. Attach the additional input devices to the machine
* 3. ls -l /dev/usb/hid* to see what the newly attached device names
are. Note at the end of each symlink line it will list whether it is a
keyboard or a mouse.
* 4. Add lines of the following form to OWconfig, one for each
device, and each with a unique name beginning with "IMOUSE" or "IKBD":
# sun Keyboard module
class="XINPUT" name="IKBD2"
dev="/dev/usb/hid2" strmod="usbkbm"
ddxHandler="ddxSUNWkbd.so.1"
ddxInitFunc="ddxSUNWkbdProc";
# sun Mouse module
class="XINPUT" name="IMOUSE2"
dev="/dev/usb/hid3" strmod="usbms"
ddxHandler="ddxSUNWmouse.so.1"
ddxInitFunc="ddxSUNWmouseProc";
* 5. To configure multiseat mode, add a section to OWconfig to
associate each keyboard, mouse, and frame buffer with a specific display
(in this case ":1"):
class="XDISPLAY" name="1"
coreKeyboard="IKBD2" corePointer="IMOUSE2"
dev0="/dev/fb1";
* 6. Test your configuration. For multiseat mode, run an Xserver on
the display you listed (xinit :1 or add a line for :1 to
/etc/dt/config/Xservers ). For use with the X input extension, restart X
and run xinputdev -l (source code here) to list the devices the server
sees. You can also run xinputdev -k & xinputdev -m to switch your core
keyboard and mouse to the specified devices.

The report gets called via the rwservlet (hope that answers your question correctly)
The application is in OAS.
The separation i require is both in the database and the reports themselves.
For example let's say i have devapp and testapp - both the exact same app. But they both need to access reports under the same key, but the report needs to get its info from its respective dev and test databases. The key is hardcoded so can't change.
If i understand correctly (a big "if"), the cgicmd.dat file tells wich report to grab and which database to connect to based on the key. Is there a way to have separate key map files (cgicmd.dat) called by separate applications? So that devapp will get Report1 using devdatabase, where testapp wil get Report1 using testdatabase?
It may not be possible to do this kind of server consolidation, I just need to know one way or another for sure - and if it is possible, how to proceed.

OAM Webgate - webgate agent point to multiple Access Servers?

I am trying to find out if it is possible to have a single webgate agent on OHS server point to more than one OAM server.
We have multiple OAM servers (not clustered) behind a load balancer. When I set up an agent for the OHS server, I copy the cwallet.sso and ObAccessClient.xml from, for example, OAM server 1. The OAM servers are all setup the same.
It seems the cwallet.sso is tied directly to that OAM server, and if I try to point the OHS to server 2, I get errors. I change the ObAccessClient.xml to the url specified in the load balancer.
Is it possible to have one set of files (cwallet.cco and ObAccessClient.xml) that would work on different OAM servers?
thanks in advance.
Mark

In that case, the default behaviour is that a WebGate cannot connect to an OAM server in a different installation (different to the one it is registered in).
However, this functionality is available in a Multi-Data Centre architecture, details of which can be found here: Using Multi-Data Centers - 11g Release 2 (11.1.2.2)
I think this may meet your requirements?
Regards,
Colin

IIS proxying to multiple WebLogic Servers by path

Hi all,
Is it possible to have 1 IIS proxying to 2 or more different
weblogic instances (no cluster) BY PATH (no virtual hosts, no proxying by extension)?.
Maybe 2 or more iisproxy.ini (or different sections in one) depending on iisforward
path :)
Just like with Apache or Netscape:
APACHE:
MatchExpression "/pathA/*" WebLogicHost=hostA|WebLogicPort=7001|CookieName=CookieA|ErrorPage=/LogoutA.htm
MatchExpression "/pathB/*" WebLogicHost=hostB|WebLogicPort=7003|CookieName=CookieB|ErrorPage=/LogoutB.htm
or
<LocationMatch "^/pathA/">
SetHandler weblogic-handler
WebLogicHost hostA
WebLogicPort 7001
CookieName CookieA
ErrorPage /LogoutA.htm
</LocationMatch>
<LocationMatch "^/pathB/">
SetHandler weblogic-handler
WebLogicHost hostB
WebLogicPort 7003
CookieName CookieB
ErrorPage /LogoutB.htm
</LocationMatch>
NETSCAPE:
<Object name="object1" ppath="*/pathA/*">
Service fn="wl-proxy" WebLogicHost="hostA" WebLogicPort="7001" CookieName="CookieA"
ErrorPage="/LogoutA.htm"
</Object>
<Object name="object2" ppath="*/pathB/*">
Service fn="wl-proxy" WebLogicHost="hostB" WebLogicPort="7003" CookieName="CookieB"
ErrorPage="/LogoutB.htm"
</Object>
TIA.

Issue:
How can IIS 4 or IIS 5 be setup to proxy from one IIS server to
multiple WLS servers.
For example:
http://iisserver/myapp --> proxy http://wls1:7001/test
http://iisserver/myapp2 --> proxy http://wls2:7001/test
Resolution:
Proxying to different weblogic instances with one IIS Server can be
accomplished by using IIS Virtual Directories.
a) Create a Web site and two virtual directories for it.
b) Create two directories for the two virtual directories and copy
iisproxy.dll to each of the directories.
c) Create iisproxy.ini files in each directory created at step b. One
for proxying to WebLogic Server A and another for WebLogic Server B.
d) Register each iisproxy.dll to each of the virtual directories with
IIS by specifying the appropriate mime-type. If you want to proxy everything
for that virtual directory, then you will specify a mime-type of *.
Please note that specifying a mime-type of * will not work with IIS 4.
e) Make sure you set the Application Protection to HIGH for each
Virtual Directory.
Attachments:
No Attachments Available
"PacoG" <[email protected]> wrote in message
news:40c6eb20$1@mktnews1...
>
try {
NewsRefresh nrefresh=NewsRefreshFactory.getInstance("Please");
nrefresh.execute("HELP");
} catch (Exception allexceptions) {
throw new IKnowIKnowException("Linux+Apache");

Forwarding requests to multiple weblogic servers

Hi,
I have two applications running on two different Weblogic servers and wish to
use one Apache web server as a front end interface. I can forward the requests
from apache to one weblogic server using apache-weblogic bridge.
Is it possible to forward requests to either one of the weblogic servers based
on some conditions?
How do we put IF/ELSE IF type constructs in apache configuration file so that
it can get requests for both the weblogic servers and then forward the request
to one of the weblogic servers ? Conditions can be anything like some particular
path, some data in request header, some constant in apache conf file etc
Thanks in advance.
Mandar

Issue:
How can IIS 4 or IIS 5 be setup to proxy from one IIS server to
multiple WLS servers.
For example:
http://iisserver/myapp --> proxy http://wls1:7001/test
http://iisserver/myapp2 --> proxy http://wls2:7001/test
Resolution:
Proxying to different weblogic instances with one IIS Server can be
accomplished by using IIS Virtual Directories.
a) Create a Web site and two virtual directories for it.
b) Create two directories for the two virtual directories and copy
iisproxy.dll to each of the directories.
c) Create iisproxy.ini files in each directory created at step b. One
for proxying to WebLogic Server A and another for WebLogic Server B.
d) Register each iisproxy.dll to each of the virtual directories with
IIS by specifying the appropriate mime-type. If you want to proxy everything
for that virtual directory, then you will specify a mime-type of *.
Please note that specifying a mime-type of * will not work with IIS 4.
e) Make sure you set the Application Protection to HIGH for each
Virtual Directory.
Attachments:
No Attachments Available
"PacoG" <[email protected]> wrote in message
news:40c6eb20$1@mktnews1...
>
try {
NewsRefresh nrefresh=NewsRefreshFactory.getInstance("Please");
nrefresh.execute("HELP");
} catch (Exception allexceptions) {
throw new IKnowIKnowException("Linux+Apache");

Multiple LDAP Servers in Fusion Middleware (OBIEE 11g)

Hello,
I have a question, regarding integration of multiple LDAP servers with single Weblogic Server of Fusion Middleware (OBIEE 11g). We are currently using OBIEE 10g. We are on verge of migrating to 11g. However, I have a question regarding the LDAP server.
Our two applications run on two distinct LDAP servers. The plan is to provide a single sign on link for OBIEE 11g reports to the end users and depending on what application they are using, they must be authenticated against the respective LDAP server.
So, my question, is it possible to Integrate two different LDAP servers in the Weblogic of Fusion Middleware (OBIEE 11g). If so, what would be the steps. Any helpful document will also be appreciated.
Thank you,
Chandu.

Yes, you can configure multiple authentication providers one by one as you generally do.
When you configure multiple Authentication providers, use the JAAS Control Flag for each provider to control how the Authentication providers are used in the login sequence. You can set the JAAS Control Flag in the WebLogic Administration Console.
REQUIRED—The Authentication provider is always called, and the user must always pass its authentication test. If authentication succeeds or fails, authentication still continues down the list of providers.
REQUISITE—The user is required to pass the authentication test of the Authentication provider. If the user passes the authentication test of this Authentication provider, subsequent providers are executed but can fail (except for Authentication providers with the JAAS Control Flag set to REQUIRED).
SUFFICIENT—The user is not required to pass the authentication test of the Authentication provider. If authentication succeeds, no subsequent Authentication providers are executed. If authentication fails, authentication continues down the list of providers.
OPTIONAL—The user is allowed to pass or fail the authentication test of this Authentication provider. However, if all Authentication providers configured in a security realm have the JAAS Control Flag set to OPTIONAL, the user must pass the authentication test of one of the configured providers.
refer - http://docs.oracle.com/cd/E13222_01/wls/docs92/secmanage/atn.html
Regards
Mukesh Negi
http://weblogicserveradministration.blogspot.in/

WebLogic 12.1.2 erases subdeployment on Distributed Queue when targeted to multiple JMS Servers

Update: verified in a 12.1.1.0 (JDK6) cluster - bug does not occur there.
Hi,
I have been migrating an 10.3.5.0 server to WebLogic 12.1.2.0 and have been unable to keep the subdeployment dropdown populated in the subdeployment tab of a uniform distributed queue when the subdeployment targets more than 1 JMS Server.
If I uncheck one of the servers - I work fine - however I would like to target all JMS Servers in the cluster - this used to work fine in 10.3.5.0
Following
http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jms_modules/distributed_queues/CreateUniformDistributedQueues.html
I am able to create a new queue no problem against the multiple-server subdeployment - but when I navigate to the subdeployment dropdown - the target is erased with "None".
If I save the subdeployment after setting it during the queue create - it is erased
<sub-deployment-name>MW-JMS-SubDeployment</sub-deployment-name>
Before:
<weblogic-jms xmlns="http://xmlns.oracle.com/weblogic/weblogic-jms" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.1/weblogic-jms.xsd">
<uniform-distributed-queue name="HousekeeperControlQueue">
    <sub-deployment-name>MW-JMS-SubDeployment</sub-deployment-name>
    <jndi-name>jms/HousekeeperControlQueue</jndi-name>
</uniform-distributed-queue>
</weblogic-jms>
After:
<weblogic-jms xmlns="http://xmlns.oracle.com/weblogic/weblogic-jms" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.1/weblogic-jms.xsd">
<uniform-distributed-queue name="HousekeeperControlQueue">
    <jndi-name>jms/HousekeeperControlQueue</jndi-name>
</uniform-distributed-queue>
</weblogic-jms>
Workaround:
- upon server startup the config is valid - just dont re-save the jms module or the subdeployment target will be erases
- also when creating a new subdeployment you will be able to select it from a jms distributed queue in the advanced targeting section even if it contains expected multiple JMS servers
- you will not however be able to edit the JMS queue once created - if there is any change to targeting - recreating the queue is required
thank you
/michael

Update: verified in a 12.1.1.0 (JDK6) cluster - bug does not occur there.
Hi,
I have been migrating an 10.3.5.0 server to WebLogic 12.1.2.0 and have been unable to keep the subdeployment dropdown populated in the subdeployment tab of a uniform distributed queue when the subdeployment targets more than 1 JMS Server.
If I uncheck one of the servers - I work fine - however I would like to target all JMS Servers in the cluster - this used to work fine in 10.3.5.0
Following
http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jms_modules/distributed_queues/CreateUniformDistributedQueues.html
I am able to create a new queue no problem against the multiple-server subdeployment - but when I navigate to the subdeployment dropdown - the target is erased with "None".
If I save the subdeployment after setting it during the queue create - it is erased
<sub-deployment-name>MW-JMS-SubDeployment</sub-deployment-name>
Before:
<weblogic-jms xmlns="http://xmlns.oracle.com/weblogic/weblogic-jms" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.1/weblogic-jms.xsd">
<uniform-distributed-queue name="HousekeeperControlQueue">
    <sub-deployment-name>MW-JMS-SubDeployment</sub-deployment-name>
    <jndi-name>jms/HousekeeperControlQueue</jndi-name>
</uniform-distributed-queue>
</weblogic-jms>
After:
<weblogic-jms xmlns="http://xmlns.oracle.com/weblogic/weblogic-jms" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.1/weblogic-jms.xsd">
<uniform-distributed-queue name="HousekeeperControlQueue">
    <jndi-name>jms/HousekeeperControlQueue</jndi-name>
</uniform-distributed-queue>
</weblogic-jms>
Workaround:
- upon server startup the config is valid - just dont re-save the jms module or the subdeployment target will be erases
- also when creating a new subdeployment you will be able to select it from a jms distributed queue in the advanced targeting section even if it contains expected multiple JMS servers
- you will not however be able to edit the JMS queue once created - if there is any change to targeting - recreating the queue is required
thank you
/michael

How do you span a jta usertransaction across multiple jms servers?

I have an ejb that connects to multiple jms servers (non-clustered) and
          retrieves messages. Those messages are concatenated together and placed on
          another jms queue. Is it possible to do all of this inside of one
          transaction? I am having trouble pulling this off.


Sure, you can do this. Assuming you're using WLS JMS, you have to make sure that for all the JMS servers you're talking to, you use a connection factory with the "XA Connection Factory Enabled" flag set. You also need to make sure that you use JTA to start a transaction before retrieving the first message, and commit it after you're done with the final send.

SMSY_SETUP Expert Setting Multiple SLD Servers

Similar Messages

Maybe you are looking for