SMTP address

Hi all
I hope some one can help.
I use mail and entourage, on a laptop. When i use them from home they are fine. I have a SMTP address which i can use from my house where i know the interent provider. But if i take my laptop out and use WIFI then i can still receive on my pop address but not send out on the smtp (where i do not know the service provider)
any ideas of how to rectify this?
please help
thanks
john

Is this SMTP server authenticated?
If so, many paid and free wireless access locations do not support an authenticated SMTP server that is outside of their network.
If the SMTP server is authenticated, turning off authentication for the SMTP server when connected there should resolve it.
If not, you need to check with the internet provider for this wireless access location to determine their required settings for using an SMTP server that is outside of their network.

Similar Messages

  • Gmail Account in iMail - adding multiple exchange SMTP addresses to Gmail

    Summary:  I am trying to use my Gmail to send messages through iMail from my other addresses that I have added to my Gmail account successfully.
    Detail:
    I currently have 5 email addresses, and the most recent one I created was my Gmail address.  Everything is working perfectly online with gmail and on my ipad - I can send and receive from each email address within my one email account, Gmail, BUT my computer is not happy.  I am still willing to work with iMail as I have always enjoyed using it, however it will not allow me to send out emails through my Gmail account using my two email addresses that happen to be Exchange emails.  My Pop and IMAP addresses that I have added to my Gmail account are fine and their SMTP addresses are working, but my two Exchange SMTP addresses are currently listed as "Offline" even though I have entered all the information that I think is correct, or is what I entered online in my Gmail account and they work perfectly fine there and also on my ipad.  I just can't seem to get them to work in iMail.  Everything else is synchronized and everything updates between my iMail, my iPad and the Gmail online account, and I have a feeling that it is just not possible to get the exchange accounts working on the iMail through Gmail.  The two emails I am working with here are university emails that have their own addresses, but run through Windows live.  So they are smtp.exchangelabs.com, but the actual domains are l.uky.edu and student.gsu.edu.  I have been working on this all day so please let me know if you are able to help me in this struggle.  I have also downloaded the Gmail notifier, so I will try it out, but I am still a fan of iMail.
    Settings in iMail that are currently not working yet are working online with Gmail - in the account preferences under the advanced tab in iMail under the drop menu for SMTP outgoing server where it says "Edit SMTP server list" or something like that:
    Server Name: smtp.exchangelabs.com
    Advanced:
            Use Custom Port: 587
            SSL is NOT checked (it is TSL for my accounts)
            Authentication: Password
                   username: <my entire email address at the domain>@student.gsu.edu
                   password: <my password for that email address>

    Yeah, this really stinks. The feature is definitely gone in iOS 4. I used it all the time in iPhone OS 3.x. You can still do it in Mail in OS X (the trick is to add extra the email addresses to your main email address, separated by commas. Those will then be available to reply with) but you can't on the iPhone. Even if you tell iTunes to sync your Mail Account info, it doesn't work.
    That service seems like an interesting idea but 1) I don't want to send my mail to a third party, 2) I don't want to have to pay for what should be basic functionality, and 3) I shouldn't have to resort to a third-party for what appears to be a regression on Apple's part.

  • Exchange 2010 to 2013 cross forest migration doesn't have an SMTP address that matches the target delivery domain

    I’m having a problem moving a mailbox from exchange 2010 sp3 to Exchange 2013 which are in two separate forests.
    Two way trust in place
    Certificates imported
    ADMT is set up.
    SMTP namespace oldcompany.org and newcompany.org for the old email domain and new one is configured to be shared between forests. 
    I’m doing the following:
    Step 1
    Prepare-MoveRequest.ps1 -Identity [email protected] -RemoteForestDomainController DC1. oldcompany.Local -RemoteForestCredential $RemoteCredentials -LocalForestDomainController DC1. newcompany.local -LocalForestCredential $LocalCredentials  -TargetMailUserOU
    "OU=Office Users , DC=newcompany,DC=local" –verbose
    Everything goes ok, and a disabled user is created. A disabled user account is created in the correct OU.
    Email address is set to [email protected]
    Proxy smtp addresses are set:
    smtp:[email protected]
    SMTP:[email protected]
    smtp:[email protected]
    Step 2
    I then use ADMT and migrate sid history ect.
    Step 3
    New-MoveRequest –Identity [email protected] –Remote –Remotehostname exchange.oldcompany.local  -RemoteCredential $RemoteCredentials –TargetDeliverydomain exchange.newcompany.local
    This then fails with the error:
    The target mail user newcompany.local/Office Users /mark test' doesn't have an SMTP address that matches
    the target delivery domain 'exchange.newcompany.local'.
        + CategoryInfo          : InvalidArgument: ([email protected]:MailboxOrMailUserIdParameter) [New-MoveReques
       t], RecipientTaskException
        + FullyQualifiedErrorId : [Server=EXCHANGE,RequestId=ec704dc8-bfb9-47c1-a1ec-cc6d8ef00484,TimeStamp=23/12/2014 1
       0:51:33] [FailureCategory=Cmdlet-RecipientTaskException] 5ABE3B29,Microsoft.Exchange.Management.RecipientTasks.New
      MoveRequest
        + PSComputerName        : exchange.newcompany.local
    Any ideas what I am missing. 

    Hi Walkersway,
    As you have mentioned both the domains are "shared between forests", I would assume its added to the accepted domains as Internal Relay. Also you have 'Send Connector' Setup to relay out the email to the new forest.
    "You configure the SMTP domain as an internal relay domain to make sure that email that's addressed to that domain is accepted by the Exchange organization. The connector configuration of your organization determines how messages are routed."
    In your case "newcompany.local" should be present.
    Try this:
    New-MoveRequest –Identity [email protected] –Remote –Remotehostname exchange.oldcompany.local -RemoteCredential $RemoteCredentials –TargetDeliverydomain newcompany.local
    The TargetDeliveryDomain parameter specifies the FQDN of the external email address
    created in the source forest for the mail-enabled user when the move request is complete. This parameter is allowed only when performing remote moves with the
    Remote or RemoteLegacy parameter.
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Exchange 2010 add new email address space and additional smtp address to all recipients

    HI
    Our company is being bought and we need to change the email address for every recipient within the business group/user.
    I have added the new domain to the Accepted Domains and have confirmed that if I manually change a users smtp address that mail flow works and the postmaster account receives email.
    looking in the E-mail address policies section within the EMC we currently have 2 polices one for the current company policy call company.co.uk with a priority 1 and one called Default policy.
    when I try to edit these I get a warning message which states that this policy was created with an earlier version of exchange I have looked on our exchange 2003 environment and have found the polices and can edit them.
    Now my questions are 
    1. should I create the policy on the exchange 2003 environment or 2010
    2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
    3. I must be able to preserve the old addresses and must make the new address space the primary address?
    if anyone could help with the steps required or if there are any gotcha to avoid.
    thanks

     1. should I create the policy on the exchange 2003 environment or 2010
     You have to create in Exchange2010
    2. if I create a new policy on the exchange 2010 environment what will happen to the old addresses?
    Email address policy will change the email address if applied immediately except for the users which has "Automatically update email addresses based on e-mail address policy" option turned on
    You will get the list of users with "Automatically update email addresses based on e-mail address policy" option turned off by the below command.
    Get-Mailbox -ResultSize Unlimited | Where {$_.EmailAddressPolicyEnabled -eq $False}
    3. I must be able to preserve the old addresses and must make the new address space the primary address?
    Yes but you can keep only one as replying address.
    Please keep both address in the email address policy to preserve old email address to the users.
    If you want an autoreply, then use a hub transport rule in Exchange an Outlook rule and allow auto-replies to the internet. (auto-replies to the outside network is not a good idea)
    Here is a similar case
    http://exchangeserverpro.com/email-address-policies-in-mixed-exchange-20032007-organisations/
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Exchange 2013 - Outlook 2010 - 550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address

    Hello, 
    I have issue when sending email to some addresses. Server respond with:
    Remote Server returned '550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address (IMCEAINVALID-)'
    My enviroment: Exchange 2013, Outlook 2010 - no cached mode. Issue happend with two email addresses but not always.
    Any suggestion, how to resolve issue?
    Thx.

    Hi Tomas,
    Does this issue occur in OWA? How is the impact, only one user or all users?
    Please try to run Outlook under safe mode to avoid add-ins and AVs.
    If there is any 3rd party add-ins, please try to disable them for testing.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Mavis Huang
    TechNet Community Support

  • Message Tracking logs for secondary smtp address

    Hi,
    There are many people sending mails to secondary smtp address instead of primary smtp address. How can i pull the report of message tracking logs if they sent it to secondary smtp address using get-messagetrackinglog cmdlet?
    Sankar M http://messagingdevelopment.blogspot.in/

    Hi Sankar,
    If I don't understand your description, it seems that you want to get the message tracking log on an mailbox with primary SMTP address and secondary SMTP address.
    If it is the case, please add both primary SMTP address and secondary SMTP address to the "Recipients" parameter. More details to see:
    http://technet.microsoft.com/en-us/library/aa997573(v=exchg.150).aspx
    Thanks
    Mavis Huang
    TechNet Community Support

  • Powershell script to get all the AD accounts with multiple primary SMTP addresses

    I require a script to be run in powershell for Win Server 2008 R2, to look to AD accounts with multiple primary SMTP addresses ?
    Description: In my Organization, there can be a configuration error which might have resulted in multiple primary SMTP addresses to be assigned to a user. I want to get the list of these AD accounts which have multiple primary SMTP addresses

    Hi,
    You can use the PowerShell command given below to get the AD User name and primary smtp address in a OU,
    Get-ADuser -filter {proxyAddresses -like "*"} -searchbase "ou=testOU,dc=MyDomain,dc=local" -properties * | select name,proxyaddresses | fl
    NOTE: proxyAddresses attribute in AD User matches the primary SMTP address.
    Regards,
    Gopi
    JiJi
    Technologies

  • Problem handling SMTP address with OIM 11gR2 Exchange connector

    Hello,
    I have a problem in regarding the primary SMTP address with the Exchange connector. The connector doesn't seem to be able to update it. Changing a user's primary SMTP address from its account details in OIM creates a new secondary address in Exchange. It does not change the current primary SMTP address. This does not look like a normal behavior... Any ideas on how to fix this?
    I'm using OIM 11gR2 with BP10 with AD 11.1.1.5.0A and Exchange 11.1.1.5.0.
    Thanks,
    --jtellier

    Yes, you can try out few things suggested in below thread
    Re: Exchange Provisioning
    The error looks like form exchange server side but still not sure about it.
    Meantime open Service Request with oracle about the same as I can see other developers are also facing same issue.

  • How to reconfigure notification email and smtp addresses

    Hi all,
    I want to reconfigure notification email and smtp addresses on single instance db (10.2 and 11.1 versions). How this is done?

    emca -reconfig dbcontrol db [email protected]
    /opt/oracle/product/11gR1/db/bin/emca [operation] [mode] [dbType] [flags] [parameters]
    -h | h | -help | help: prints this help message
    -version: prints the version
    -config dbcontrol db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure Database Control for a database
    -config centralAgent (db | asm) [-cluster] [-silent] [parameters]: configure central agent management
    -config all db [-repos (create | recreate)] [-cluster] [-silent] [-backup] [parameters]: configure both Database Control and central agent management
    -deconfig dbcontrol db [-repos drop] [-cluster] [-silent] [parameters]: de-configure Database Control
    -deconfig centralAgent (db | asm) [-cluster] [ -silent] [parameters]: de-configure central agent management
    -deconfig all db [-repos drop] [-cluster] [-silent] [parameters]: de-configure both Database Control and central agent management
    -addInst (db | asm) [-silent] [parameters]: configure EM for a new RAC instance
    -deleteInst (db | asm) [-silent] [parameters]: de-configure EM for a specified RAC instance
    -reconfig ports [-cluster] [parameters]: explicitly reassign Database Control ports
    -reconfig dbcontrol -cluster [-silent] [parameters]: reconfigures RAC Database Control deployment
    -displayConfig dbcontrol -cluster [-silent] [parameters]: displays information about the RAC Database Control configuration
    -migrate -from dbcontrol -to centralAgent [-repos drop] [-cluster] [-silent] [parameters]: migrates EM configuration from Database Control to central agent
    -upgrade (db | asm | db_asm) [-cluster] [-silent] [parameters]: upgrades an earlier version of the EM configuration to the current version
    -restore (db | asm | db_asm) [-cluster] [-silent] [parameters]: restores the current version of the EM configuration to an earlier version
    Parameters and Options:
    [parameters]: [ -respFile fileName ] [ -paramName paramValue ]*
    db: perform configuration operation for a database (including databases that use ASM)
    asm: perform configuration operation for an ASM-only instance
    db_asm: perform upgrade/restore operation for a database and an ASM instance
    -repos create: create a new Database Control repository
    -repos drop: drop the current Database Control repository
    -repos recreate: drop the current Database Control repository and recreate a new one
    -cluster: perform configuration operation for a RAC database
    -silent: perform configuration operation without prompting for parameters
    -backup: configure automatic backup for a database
    Parameters for single instance databases
    ORACLE_HOSTNAME: Local hostname
    SID: Database SID
    PORT: Listener port number
    ORACLE_HOME: Database ORACLE_HOME
    HOST_USER: Host username for automatic backup
    HOST_USER_PWD: Host user password for automatic backup
    BACKUP_SCHEDULE: Automatic backup schedule (HH:MM)
    EMAIL_ADDRESS: Email address for notifications
    MAIL_SERVER_NAME: Outgoing Mail (SMTP) server for notifications
    ASM_OH: ASM ORACLE_HOME
    ASM_SID: ASM SID
    ASM_PORT: ASM port
    ASM_USER_ROLE: ASM user role
    ASM_USER_NAME: ASM username
    ASM_USER_PWD: ASM user password
    SRC_OH: ORACLE_HOME for the database to be upgraded
    DBSNMP_PWD: Password for DBSNMP user
    SYSMAN_PWD: Password for SYSMAN user
    SYS_PWD: Password for SYS user
    DBCONTROL_HTTP_PORT: Database Control HTTP port
    AGENT_PORT: EM agent port
    RMI_PORT: RMI port for Database Control
    JMS_PORT: JMS port for Database Control
    EM_SWLIB_STAGE_LOC: Software library location
    PORTS_FILE: Path to a static file specifying the ports to use (Default value : ${ORACLE_HOME}/install/staticports.ini).
    Additional Parameters for cluster databases
    CLUSTER_NAME: Cluster name
    DB_UNIQUE_NAME: Database unique name
    SERVICE_NAME: Service name
    EM_NODE: Database Control node name
    EM_SID_LIST: Agent SID list [comma separated]

  • Exchange - Export only primary SMTP addresses

    Hi SpiceHeads, 
    I'm looking for a script or help to write a script that simply dumps all primary SMTP addresses to a text file, one per line.
    Everything I've found or even using exchange powershell includes additional fluff like names or alias's.
    Any help would be appreciated.
    This topic first appeared in the Spiceworks Community

    I'm seeing this same limitation and I'm needing to determine if it is an ActiveSync limitation from Exchange or if it maybe is a limitation of the mobile device. 
    I have customers who are delegates for multiple exchange mailboxes.  For the sake of example I'll use the following:
    John Smith ([email protected]) is a delegate on a shared mailbox ([email protected]) and a delegate for his boss, Cheryl Thompson ([email protected]). 
    John has an Iphone 4S running IOS7.  He adds his exchange account ([email protected]) and accesses email/contacts/calendars on that account with no issues.
    Next he adds the shared mailbox by putting [email protected] in as the email address of the account, but he uses jsmith with his password as his user credentials.  The account is added and John is able to access the shared mailbox and calendars for
    this account.
    When he trys to add the 3rd account for his boss, he uses his boss' email address ([email protected]) with his jsmith credentials and he gets the following error:  "Cannot Create Account:  An identical Exchange account already exists." 
    Any idea of whether this is an Exchange 2010 limitation or an IOS limitation?  The infrastructure we are using is Exchange 2010.
    Todd Boring
    MD Anderson Cancer Center

  • Incorrect alias and SMTP address

    Hello,
    some users were imported into Unity Connection 8.5 with an incorrect alias.  They were demoted out of LDAP, had their alias changed and then integrated back with LDAP.  Their SMTP address in Unity was still the old address based on the incorrect alias.  When we try to change it to the correct address Unity says that a user with that SMTP address already exists.  Any way to  correct this issue?
    Thanks in advance!  all replies rated.

    She's now transfering me to a supervisor...........gonna take all day haha
    He told me to go to appleid.apple.com whooo!
    He seems to know his stuff though so I'm gonna stay on the line with him. He said one of the engineers might be able to change it.
    He's doing some research now....

  • Customizing Outlook with SMTP Address

     
    Hello
    When a client opens Outlook, their email address appears at the top of the , in the form of: Inbox -
    User@address.
    Recently, we gave users a second SMTP address which we would like to be shown at this page rather than the old one (which is currenty showing)
    Is there anyway this can be done? My instinct tells me GPO maybe...but am not sure if this parameter is modifiable.
    Please Help!
    Thanks

    Hi Pinky,
    Thank you for your question.
    I agree with Nothing123.
    Email address which appears at the top of outlook is a primary address. If you want to display the second email address, we just set second email address as primary address.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Easily remove an SMTP address that has been applied by a Email Address Policy?

    Hello,
    How can I remove an SMTP address that has been applied to all users mailboxes and distribution lists?
    Thanks

    Hi,
    You can use "Email Address Policy" to manage all of the user's SMTP address.
    For Exchange 2003:
    How to Modify an SMTP E-Mail Address by Using Recipient Policies
    For Exchange 2007:
    Managing E-Mail Address Policies in Exchange Server 2007
    For Exchange 2010:
    Remove an E-Mail Address Policy
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Event 9325 smtp address

    hi
    I'm getting many event id 9325 , for active directory users that do not have mailbox associated .
    which ad attribute is complaining about ?
    regards
    EventID: 0x0000246D (9325) - OABGen will skip user entry 'peter pan' in address list '\Global Address List' because the SMTP address '' is invalid. - \Default Offline Address List   
    antonio

    This is a similar discussion that might answer your question:
    https://social.technet.microsoft.com/Forums/exchange/en-US/fc1ae693-6834-46e3-ab1d-c5c2d6099a16/event-id-9325-and-9327-oal-generator-error?forum=exchangesvravailabilityandisasterrecoverylegacy
    It does mention that attributes in question.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Journal to SMTP address

    Is it possible to setup OCS to journal / copy all mail to an additional SMTP address?

    Hello,
    You're right. When the journaling mailbox reaches the configured storage quota, the journaling mailbox will stops accepting journal reports. Exchange will hold undelivered journal reports in a mail queue and tries to redeliver them until delivery is successfully.
    It will cause high messaging traffic. So I recommend you configure journaling mailboxes without storage quotas or configure an alternate journaling mailbox.
    You can configure an alternate journaling mailbox, it will receive the journal reports as attachments in the NDRs generated when the journaling mailbox or the server on which it's located refuses delivery of the journal report or becomes unavailable.
    Could you explain the the max length of the queue? It refers to DatabseMaxCacheSize or others. If it means DatabaseMaxCacheSize, you can modify the value in EdgeTransport.exe.config file.
    My environment is exchange 2010. At present, there is no performace issue. I recommend you use performance counters to monitor the journaling agent.
    I'm afraid that there is no way to configure the journal report messages that will never expire.
    If I have any misunderstanding, please free let me know.
    Cara Chen
    TechNet Community Support

  • What is SMTP address?

    Anybody could u tell what is SMTP address?
    Thanks in advance.

    jschell wrote:
    Vinodha wrote:
    Anybody could u tell what is SMTP address?It is an address for SMTP of course.I'm not sure I have ever seen "SMTP address" used as a technical term. Maybe it's one of those phrases like "e-mail ID" which are loosely used in some parts of the world instead of the standard phrases.

Maybe you are looking for