SMTP configuration on Mail tab of job manager didn't work

In the job manager, I entered my SMTP server address, port number, user name and password correctly, but when the ibots execution, I got the error message: Authentication unsuccessful, it seems the user name or password was uncorrect, but they were all correct.
My SMTP server is MS Exchange? Does ibot depend on any specific version of Exchange?
I can use gmail to send email using the same configuration.
who can help me? thanks!
Edited by: 816112 on 2010-11-27 上午4:19

Check with your email provider about the correct server settings, and compare that with your account settings.
There is no point guessing or trying arbitrary combinations of settings.

Similar Messages

Windows xp; Current Firefox version; won't open mail tabs on AOL. Explorer still works... Has this happened to anyone else?

I'm Running the current Version of Firefox. Have the most up to date version of Windows XP.
Most recently I've not been able to get any action when I click on AOL "check mail" buttons.
(i.e. new mail, sent mail, etc.) they still work if I go to Explorer... i just hate going that route though...
Anybody else seen this. Strange....
Thanks in advance for any help.
Regards,
Ranger Barry

I don't use AOL, so let me give you some general suggestions, in case you haven't already tried them.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

When I updated to v7 my internet down manager didn't work.Could not download using my Internet Manager. It was working when I was using v5

I use Internet Download Manager to download
This program was working when I had V5
I updated to V7
I was not able to download using my Internet Manager program
I went back to V5 and I was able to download using my Internet Manager.

Update IDM.
http://www.internetdownloadmanager.com/
New! Internet Download Manager v6.07. Fixed compatibility problems with different browsers including Internet Explorer 9 Final, Mozilla Firefox 4, Mozilla Firefox 5, Mozilla Firefox 6 and '''Mozilla Firefox 7''', Google Chrome. Improved FLV grabber to save videos from web players on YouTube, WOW! Google Video, MySpace TV, and other popular sites

Configuring SBO Mailer 9.0 in service manager

Hello experts,
Can anyone help me with SBO Mailer configuration? As a part of post-installation activities, I am trying to configure SBO Mailer in SAP service manager, but have no clue about SMTP server and port. In AdministratorGuide there is not much about it. I need more specific guide, specially regarding SMTP server and port.
Thank you in advance.

Dear Matt Beheshti,
You can find this in Account Setting of Outlook.
For more help regarding Mail Sever, Please ask your IT Manager or System Administrator.
Hope this help
Regards::::
Atul Chakraborty

Mail Server and SMTP Configuration (Leopard Server)

Hello,
Our setup: Mac OS X SERVER 5.2 - LEOPARD SERVER
PowerPC G5
Orange Internet connection via a router / DHCP
We try to find such assistance in configuring your Mac book
OS Server at your service.
We set our server with a local area "domaine.intranet"
We created users with the interface, and have an address
"[email protected]."
Our messaging system works internally with the client MAIL.
We also have an Internet domain "domaine.fr", this area is hosted
In online.net.
We have personal e-mail addresses such as "[email protected]" always
Hosted by online.
We can check our e-mails via the client MAIL by IMAP.
However, we do not send emails to the outside world, and especially
"Domaine.fr" or "[email protected]."
In the console admin Server:
-- LETTERS: we have turned the SMTP protocol allowing mail
Entrant, authorizing "Relayer outgoing mail over the host:
Smtp.orange.fr "
At the tab relay, we leave the config classic 127.0.0.0 / 8
And 192.168.1.0/24.
In the history of mail, there are "postfix / postfix-7563]: fatal: the
Postfix mail system is not running, why then that the service operates on
Priori!
How can I be able to send emails to the outside knowing that we
Use addresses' [email protected]. "
Please tell us a direction to follow or procedure.
Sincerely,
ORIGINAL IN FRENCH
Notre configuration : Mac OS X SERVER 5.2 - LEOPARD SERVER
PowerPC G5
Connexion internet orange via un routeur/DHCP
Nous avons essayer de trouver cette aide à la configuration dans votre livre Mac
OS Server à votre service.
Nous avons configuré notre serveur avec un domaine local en "domaine.intranet"
Nous avons créé des utilisateurs à l'aide de l'interface, et avons une adresse
"[email protected]".
Notre système de messagerie fonctionne en interne avec le client MAIL.
Nous avons également un domaine internet "domaine.fr", ce domaine est hébergé
chez online.net.
Nous avons des adresses mail personnel du type "[email protected]" toujours
hébergé chez online.
Nous pouvons consulter nos emails via le client MAIL par IMAP.
Par contre, nous n'arrivons pas à envoyer des emails à l'extérieur, et notamment
sur "domaine.fr" ou "[email protected]".
Dans la console d'admin Serveur :
- COURRIER : nous avons activé le protocole SMTP en autorisant le courrier
entrant, en autorisant "Relayer le courrier sortant via l'hôte :
smtp.orange.fr"
Au niveau de l'onglet relais, nous avons laisser la config classique 127.0.0.0/8
et 192.168.1.0/24.
Dans l'historique de courrier, il y a "postfix/postfix-script[7563]: fatal: the
Postfix mail system is not running", pourquoi alors que le service fonctionne à
priori !
Comment faire pour pouvoir envoyer nos emails à l'extérieur sachant que nous
utilisons les adresses "[email protected]".
Merci de nous indiquer une direction à suivre ou une procédure.
Cordialement,
Message was edited by: serveurbense

Hello,
Thanks for the reply.
I modified according to your advice and tried to send mail, but it does only internally. My mail.log gives me the following information:
Apr 21 10:59:30 domaine postfix/smtp[4521]: 46D302308BE: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.84]:25, delay=0.27, delays=0.05/0.01/0.16/0.05, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.84] said: 554 <[email protected]>: *Recipient address rejected: Missing Authentication (in reply to RCPT TO command))*
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 2147323090F: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 022FF230937: to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.01/0.04/0/0.23, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: *Sender address rejected: Domain not found (in reply to MAIL FROM command))*
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: Sender address rejected: Domain not found (in reply to MAIL FROM command))
Apr 21 11:00:27 domaine postfix/cleanup[4600]: 602A423094E: message-id=<[email protected]>
Apr 21 11:00:27 domaine postfix/bounce[4612]: 022FF230937: sender non-delivery notification: 602A423094E
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: from=, size=3531, nrcpt=1 (queue active)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 022FF230937: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 602A423094E: to=<[email protected]>, relay=cyrus, delay=0.06, delays=0.01/0/0/0.05, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: removed
Apr 21 11:01:10 domaine postfix/postfix-script[4664]: refreshing the Postfix mail system
Apr 21 11:01:10 domaine postfix/master[2938]: reload configuration /etc/postfix
Apr 21 11:01:26 domaine postfix/smtpd[4516]: disconnect from domaine.intranet[192.168.1.11]
Apr 21 11:02:10 domaine postfix/postfix-script[4734]: refreshing the Postfix mail system
I am looking for solutions to correct mistakes 553 and 554, hoping that this will allow us to send mail out.
Do you have any other suggestions?
Thank you.
Bonjour
merci pour la réponse.
J'ai modifié selon vos conseils et essayé d'envoyer des mails, mais ça ne marche qu'en interne. Mon mail.log me donne les informations suivantes:
Apr 21 10:59:30 domaine postfix/smtp[4521]: 46D302308BE: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.84]:25, delay=0.27, delays=0.05/0.01/0.16/0.05, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.84] said: 554 <[email protected]>: *Recipient address rejected: Missing Authentication (in reply to RCPT TO command))*
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 2147323090F: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 022FF230937: to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.01/0.04/0/0.23, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: *Sender address rejected: Domain not found (in reply to MAIL FROM command))*
Apr 21 11:00:27 domaine postfix/smtp[4606]: 022FF230937: to=<[email protected]>, relay=smtp.orange.fr[193.252.22.86]:25, delay=0.31, delays=0.01/0.04/0.18/0.08, dsn=5.0.0, status=bounced (host smtp.orange.fr[193.252.22.86] said: 553 <[email protected]>: Sender address rejected: Domain not found (in reply to MAIL FROM command))
Apr 21 11:00:27 domaine postfix/cleanup[4600]: 602A423094E: message-id=<[email protected]>
Apr 21 11:00:27 domaine postfix/bounce[4612]: 022FF230937: sender non-delivery notification: 602A423094E
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: from=, size=3531, nrcpt=1 (queue active)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 022FF230937: removed
Apr 21 11:00:27 domaine postfix/pipe[4608]: 602A423094E: to=<[email protected]>, relay=cyrus, delay=0.06, delays=0.01/0/0/0.05, dsn=2.0.0, status=sent (delivered via cyrus service)
Apr 21 11:00:27 domaine postfix/qmgr[4582]: 602A423094E: removed
Apr 21 11:01:10 domaine postfix/postfix-script[4664]: refreshing the Postfix mail system
Apr 21 11:01:10 domaine postfix/master[2938]: reload configuration /etc/postfix
Apr 21 11:01:26 domaine postfix/smtpd[4516]: disconnect from domaine.intranet[192.168.1.11]
Apr 21 11:02:10 domaine postfix/postfix-script[4734]: refreshing the Postfix mail system
Je cherche des solutions pour corriger les erreurs 553 et 554, espérant que cela nous permettra d'envoyer des mails à l'extérieur.
Avez-vous d'autres propositions?
Merci d'avance.

Mail SMTP configuration error: how to solve?

I have two problems with configuring SMTP accounts on my iPhone (4s, with IOS7):
1) the SMTP is configured, but iOS puts the wrong username together, so login fails. Here is, how:
SMTP server: smtp.myprovider.com (this is the SMTP of my provider)
username: [email protected] (mydomain.com is the domain I host there, and the EMAIL is my username!)
All other settings are trivial and correct.
... And now my iPhone connects (correctly) to the SMTP smtp.somewhere.com, but logs in with the username "[email protected]@smtp.myprovider.com" which obviously must fail.
Any suggestions?
2) I have several accounts (POP and IMAP), all of which need THEIR SPECIFIC SMTP account. Why?
Because an increasing number of providers have their SPAM filters configured so as they throw away (they don't even reject sometimes) all mail which is not sent by the SMTP of the provider where the domain is hosted (quite sensibly, though).
iOS lets me configure a primary SMTP and other SMTP, but does not let me configure ONE SMTP per ACCOUNT each. Or did I miss something?
The result: All mail is sent via the primary SMTP (which accepts mails from any email to any email as long as I am authentified), and some mails get thrown away by SPAM filters because the SMTP does not match the mail address.
Any suggestions would be deeply appreciated!
These things just threw my iPhone useless for mail for any mail account with is (what a shame!) not a MS Exchange account ... Steve would rotate in his grave if he heared that.

watch on sun forum.

Mail configuration in sap (smtp configuration)

hi all,
i am Hardik Patel. i want to cofigure mails in sap means smtp configuration.
if anybody knows that how to configure it then let me know please.
if anybody is having step by step guide documents for this configuration then he/she can send me on this e-mail id - "[email protected]"
thanks in advance,
regards,
hardik.

hi all,
i am Hardik Patel. i want to cofigure mails in sap means smtp configuration.
if anybody knows that how to configure it then let me know please.
if anybody is having step by step guide documents for this configuration then he/she can send me on this e-mail id - "[email protected]"
thanks in advance,
regards,
hardik.

Configure E-Mail Notification with several smtp servers

Hi all,
We want to configure "reset password" and we must configure E-Mail notification.As http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bf8f2069665991e10000000a422035/content.htm shown,we can "Separate multiple SMTP server entries with a semicolon (;)" So we can add several smtp servers,right?
But I add some,only the company SMTP servers can be used,others cannot receive notification emails. What else should i configure?Can portal send emails to multiple domains ?
Best regards,
delma

How can I configure my SMTP server for allow the SAP system to send mail through it.?
I don´t know - I don´t know which mail server you use (software).
Markus

SAP J2EE engine for configuring Java mail Service.

Hi
I am experiencing following exception when trying to use JAVA mail API.
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
Relay access denied
email address above is valid..
I have to use SAP J2EE engine for configuring Java mail Service.
But is does not hav any such access permissions to check....!!

Relay access denied
To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
b.      In Exchange System Manager, expand the following object:
Servers\Your_Exchange_Server_Name\Protocols\SMTP
c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
d.      Click the Access tab, and then click Relay.
e.      By default, open relay is blocked. The default settings are as follows:
u2022     The Only the list below check box is selected.
u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
g.      In the Relay Restrictions dialog box, click OK.
h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
hope this helps you out...
Cheers,
Jazz

Send Email Report with Publisher? and Job Manager...

Hi, i have a great Doubt, i try to send Email with a report, first i try to send with Publisher, this is all configurations.
Delivery Configuration
!http://lh3.ggpht.com/_V2lpPpulbm0/Slwm-4TLiJI/AAAAAAAACag/xZ5w57zkRnM/s800/BI%20Publisher.PNG!
Email Configuration
!http://lh5.ggpht.com/_V2lpPpulbm0/Slwm_PKsjVI/AAAAAAAACak/baCeaA9kV_s/s800/BI%20Publisher2.PNG!
Configuration Send Parameters
!http://lh5.ggpht.com/_V2lpPpulbm0/SlwroVMXh4I/AAAAAAAACao/0-UaglX4N5Y/s512/configuracionparametros.PNG!
But when i submit.. i have an error: "Must issue a STARTTLS comand first",*this error* means that Gmail Server not suporter?
Do you know Some Mail Company to Rrealize some test.
!http://lh3.ggpht.com/_V2lpPpulbm0/Slwm-8g_LJI/AAAAAAAACac/1CeWNWZLL18/s640/errorpublisher.PNG!
But... It is neccesary configurate Job Manager? why is necessary configurate Publisher and Job manager, is the same? or Each one is in use for a different thing, all forms i post my Job Manager configuration too.
!http://lh4.ggpht.com/_V2lpPpulbm0/Slwm-X7idrI/AAAAAAAACaU/eq_N_Rloqjs/s576/SchedulerConfiguration.PNG!
thanks all and sorry for Spam Images(I think You comprehension better me)

. i have an error: "Must issue a STARTTLS command first",this error means that Gmail Server not suporter? yes gmail will not support to send emails from this......because our accounts are free...
Try with your corporate mail ids it will work.
It is neccesary configurate Job Manager? why is necessary configurate Publisher and Job manager, is the same? or Each one is in use for a different thing Bi Publisher will not use Job manager mail settings.....If yes ,why we need to configure the mail settings in BIPublisher itself??
Two things are different......
thanks,
Saichand.V

Apple Configurator e-mail profiles not sticking

We've been using Apple Configurator to supervise and configure iPads for quite a while now. We use Configurator's wonderful modular profile to configure e-mail accounts that are through Google. We also use different profiles to establish wireless connections and put security on the iPads. The problem is that we keep having e-mail profiles mysteriously stop working. I configure them using the imap.gmail.com/smtp.gmail.com addresses as the sending and receiving. I have even dropped off the "Outgoing password is same as incoming" setting and put the password on both parts. Removing the profile and re-adding it to the device brings back the e-mail connection. The wireless connection is fine through all of this. Each device uses only one email profile. The e-mail works fine until they get sent a group email and then one of them stops working. Is there something that could be done differently to make sure that each email accounts work fine completely all the time?

There's a way to retrieve your email verification link if this happens to you:
1. Open the the blank email
2. Hit ctrl+U- this will bring up the source code for the original email. Even though you cant see it showing up its still there.
3. Scroll down towards the bottom of the source code to line 524-
4. Slowly scroll to right and you will see the "Dear *Your Name*
5. On line 525 a bit to the left of that you will see : "You recently initiated a password reset for your Apple ID. To complete the process, click the link below. "
6. The link is on line 526 and begins with <a href="https://iforgot.apple.com/verify/ema- etc.
7. Copy that link into a new internet window and hit enter- *Do Not Click the Link*
This should allow you to get to the reset password screen and finish the process. As long as it is still in the time frame from when the email was sent. I think 1hour. This worked for me, I was using a pc at the time though, didn't try it on a mac. Let me know if this helps you. Apple let me know if I can have a job!

How to configure Sendmail mail relay with authentication

Hi,
How to configure send mail relay. Client gave us smtp host,port, username and password. We have a couple of server. If we configure the relay in any one of the server other servers able send mails using relay server. Please help me on this?

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

How to configure reciever mail adapter

Hi All,
I have gone through your weblog for configuring reciever mail adapter BY PRASAD ULAGAPPAN.
I have few doubts .
Message protocol ==      XIALL.
If I am providing my mail address in MAIL ATTRIBUTES-TO parameter
then what do we have to exactly specify in connection parameters.
I want to send a mail from XI to my ID. Suppose my id is [email protected] .
So if I am providing this ID in " TO " parameter then what should I specify in connection parameters
i.e       url = ?
           user = ?
           password = ? (which password to specify , usually we dont require to give password to recieve mails )
Please help me with this.
Waiting for your reply.
Thanks in advance

Hi Yomesh,
The below help URL gives explanation for 'Connection Parameters for Mail Server':
http://help.sap.com/saphelp_nw04/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
You need to provide your mail server details. When you send a mail normally, say from outlook, you configure it to connect to some SMTP/IMAP server, using username/password.
Provide that server details in URL.
If you dont use user/password to connect to it, leave it blank.
Also fill the 'From' mail address.
For eg., if there is a internet connectivity to your XI server, and you want to use SMTP server of yahoo to send out mails, then you can give:
URL: smtp://smtp.mail.yahoo.com
userid: yomeshsharma
password: <your yahoo password>
In this case, both your From & TO details are same.
You can change 'TO' to send to a different mail address.
regards,
Pops V
Message was edited by: Pops V

How to configure E-Mail servers in SAP?

Dear All,
| have configured e-mail server in R/3 properly (using SCOT tcode). However, when I am trying to send mails for testing purpose (using SBWP tcode), its showing status as "send process still running". But after some time, its showing status as "error during send process"
can any one please help me troubleshoot this problem? Should you need any information, kindly let me know.
Waiting for your kind immediate responses!
Regards,
Faisal

Hi Brahmankar,
I have gone through the notes and links you have sent me. Its very helpful and informative as well. Following are my observations and understandings:
1. As I mentioned, we are on 4.6C , therefore tcode SICF is not executable to activate SAPConnect service. Its only available on WAS.
2. I think I have to make use of SAP EXCHANGE CONNECTOR if its R/3 4.6C. Then only I will be able to configure SMTP mail server. Because,
note#122657 says that:
if you are using SAP system based on WAS 6.10 or above then you should use the SAPconnect (E)SMTP
linkage for the exchange connection. You no longer need to install the SAP Exchange Connector
3. Can you please confirm that I have to use SAP Exchange Connector to configure SMTP mail server?
4. There is not SMTP node in tcode SCOT ! Only I get FAX and INT nodes. How to get the SMTP node?
you said that:
If you are running Exchange Server 2003, and 4.6C it will be tricky.
could you please guide and help me in making this process tricky ?
That would be a very great help and I am looking forward to have your kind help for the same!
If you need any other information from my side, kindly let me know.
Thanks and Regards,
Faisal

How To Configure E52 Mail Box

How To Configure E52 Mail Box
Can't excess Email in Mail box

Hey Hitesh_Motee,
Welcome to the Nokia Forums!
Have you managed to sync your e-mail at any point and only recently stopped or never work to begin with? Also what e-mail provider are you using?
I suggest first of all you should contact the email provider to be sure you have all the correct configuration settings for the e-mail account.
You can also try perform a soft reset *#7780# security code 12345 by default if prompted. This will restart all your phone settings to as they where out of the box, but will not delete any of your data.
Let me know how you get along.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

SMTP configuration on Mail tab of job manager didn't work

Similar Messages

Maybe you are looking for