SMTP connection error!

Hi everyone,
Need your help, when I go to tcode SCOT there is too many errors in SMTP.
In SOST when I check the errors is as below:
"Message cannot be transferred to node SMTP due to connection error (final)"
Anyone can help me how to solve this error and let it send again by SMTP.
Thanks in advance,
Quare

Hi,
  Pls see the foll note:
875136
BR,
Disha.
Pls reward points for helpful answers.

Similar Messages

  • SMTP Connect error in Mail - Gmail

    Hi
    I have been getting the below error when i try to send an email out through the mail client. It was working just fine till this evening and now its all gone downhill...
    Please help.
    Regards
    R

    Hi
    Update on the issue, tried connecting to the internet using my cellphone and mail managed to sync. Hence I am led to believe that this is an issue with my ISP. Their DNS servers have been acting up for the last few days, could that be a reason for sync to SMTP to fail?
    Regards

  • SMTP Connection issue

    I have a fresh install of Yosemite on a mid 2011 Macbook Air. I am trying to setup Mail app for my email accounts. When I get one setup there is an SMTP connection error. I also downloaded and installed thunderbird and setup the account on there with no SMTP errors. This seems to be an issue with Mail SMTP. Any help with this would be great.

    I note that you have made similar posting that all seem to be related to the same problem you are having. It's better to make the one post and wait for someone to respond.
    What have you attempted to do so far to get Mail working again? No point in me making a suggestion which you've already tried.
    Chris

  • TCP active open: Failed connect()    Error: Connection timed out SMTP

    Hi,
    Messaging server version is,
    ./imsimta version
    Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
    libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
    SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
    17-Dec-2008 10:47:40.08 1730.8e.741
    tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
    I have been getting this above error on my mail server from last
    4-5 days. I am getting complaints from end users that the users can't
    send any mails using Outlook but I did check with my test user I can
    send mail by using webmail.
    The Failed MX lookup Errors also getting in my logs the error detail given bellow.
    17-Dec-2008 10:47:39.65 1730.91.737
    tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
    17-Dec-2008 10:47:39.92 1754.41.255
    tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
    17-Dec-2008 10:47:39.92 1754.41.256
    tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
    17-Dec-2008 10:47:39.94 1754.41.257
    tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
    I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
    When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
    /opt/SUNWmsgsr/sbin/imsimta qm su
    Messages
    Channel Queued Size (Kb) Oldest
    tcp_notify 10741 1080610.61 16 Dec, 00:59:24
    tcp_local 8334 733849.31 15 Dec, 00:19:00
    tcp_lmtpcn 0 0.00
    tcp_be 0 0.00
    reprocess 0 0.00
    process 0 0.00
    conversion 0 0.00
    Totals 19075 1814459.92
    This queues are increasing day by day.
    One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
    ps -aef | grep conversion
    root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
    When i try to start it using imsimta qm utility, output shows as
    qm.maint>; start conversion
    QM-I-STARTED, channel was not stopped
    qm.maint>;
    Later I stopped and started conversion channel
    qm.maint>; stop conversion
    QM-I-STOPPED, channel stopped
    qm.maint>; start conversion
    QM-I-STARTED, channel started
    qm.maint>;
    I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
    Please, help me to sort out this issue.
    Thanks in advance....
    BSK

    Thanks Mr. Shane,
    The server which is running conversion channel.
    ps -eaf|grep conversion
    mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
    mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
    root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
    more /opt/SUNWmsgsr/config/conversions
    in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
    IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
    The server which doesnt show running conversion channel
    #more /opt/SUNWmsgsr/config/conversions
    !in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
    ! parameter-symbol-0=NAME; parameter-copy-0=*;
    ! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    ! message-header-file=2; original-header-file=1;
    ! override-header-file=1; override-option-file=1;
    ! command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
    parameter-symbol-0=NAME; parameter-copy-0=*;
    dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
    message-header-file=2; original-header-file=1;
    override-header-file=1; override-option-file=1;
    command="/opt/SUNWmsgsr/private/virusscan.sh"
    Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
    IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
    Is this above information u r asking?
    As u wrote erlier, the conversion channel works some times and some times doesn't work.
    Thanks lot...
    BSKADAM

  • Message cannot be transferred to node SMTP due to connection error (final)

    HI Gurus,
    we are gewtting the following error inour test client in SOST transaction. Can someboyd please thriw soem light on how to resolve this?
    Message cannot be transferred to node SMTP due to connection error (final)
    Message no. XS816
    Diagnosis
    Due to a technical fault, the system could not set up a connection to the RFC destination Check port and mail server for SMTP nodes. Therefore, the message could not be transferred to node SMTP.
    System Response
    The system was unable to transfer the message.
    Additional information of the node used (in the system language of the node):
    Procedure
    Check the connection from SAP system to node SMTP. Perhaps the node is not assigned to the correct RFC destination. If so, correct this in Customizing.
    Otherwise use RFC destination management to check the RFC connection to destination Check port and mail server for SMTP nodes.
    If R/3 is in productive operation, it is advisable to reroute provisionally to another node.
    You should therefore notify your system administrator.
    Thanks
    Anusa

    Yes i completely agree, but we wanted to test this process by putting our own email addresses in the vendor master and then also maintinaing the condition records to make sure that the email are coming fine. I guess it was working until some time, but then yesterday i noticed this error message in our test client. Somehow we need tthis to get working so that we can get the signoff from the business and that this can be moved to production
    Thanks
    Anushga

  • SMTP connection manager error

    Hi I am getting an error with my SMTP connection manager.
    The progress message when the package is executed is,
    [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.  System.Net.WebException: Unable to connect to the remote server  System.Net.Sockets.SocketException: No connection could be made because the
    target machine actively refused it 198.1.1.1
    I am definitely using the correct SMPT address. Is there any other setting which I have to configure? 
    Mr Shaw

    Can you check if exchange server setting is correct?
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Send E-mail from Oracle (9.2.0.1) : SMTP transient error: 421 Service not a

    I have used Oracle 9i server (9.2.0.1 version) on Windows XP machine(with SP2).I want to send Email from PL/SQL procedure.
    My Question is what sort of configuration needed to perform this activity?
    I have installed IIS (Internet Information Service)
    in my machine, then configure my SMTP mail server
    with a valid email id and password given TCP port 465.
    Later I came to know that to send Email from PL/SQL I have to install Oracle JServer Code. Follow three steps. the steps are
    1. Execute the script as sys "$ORACLE_HOME\javavm\install\initjvm.sql"
    2. Execute the loadjava classfile as
    $ORACLE_HOME\plsql\jlib>loadjava -f -v -r -u sys/**** plsql.jar
    3. Execute the script as sys "$ORACLE_HOME\rdbms\admin\initplsj.sql"
    I sucessfully executed the first step, but for the second step iam not able to locate the plsql.jar file in the specified path.
    So Please tell me if there is any other method to perform this task
    My code is as follows.
    CREATE OR REPLACE PROCEDURE SEND_MAIL (
                                  msg_to varchar2,
                                  msg_subject varchar2,
                                  msg_text varchar2
                                  IS
                                  c utl_smtp.connection;
                                  rc integer;
                                  msg_from varchar2(50) := '[email protected]';
                                  mailhost VARCHAR2(30) := 'mail.google.com';
                             BEGIN
                                  c := utl_smtp.open_connection(mailhost, 465);
                                  utl_smtp.helo(c, mailhost);
                                  utl_smtp.mail(c, msg_from);
                                  utl_smtp.rcpt(c, msg_to);
                                  dbms_output.put_line(' Start Sending data');
                                  utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
                                  'To: ' || msg_to || utl_tcp.crlf ||
                                  'Subject: ' || msg_subject ||
                                  utl_tcp.crlf || msg_text);
                                  dbms_output.put_line(' Finish Sending data');
                                  utl_smtp.quit(c);
              EXCEPTION
                   WHEN UTL_SMTP.INVALID_OPERATION THEN
    dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
                   WHEN UTL_SMTP.TRANSIENT_ERROR THEN
    dbms_output.put_line(' Temporary e-mail issue - try again');
    WHEN UTL_SMTP.PERMANENT_ERROR THEN
    dbms_output.put_line(' Permanent Error Encountered.');
    END;
    Procedure Created.
    SQL> execute prc_send_mail('[email protected]','[email protected]','Good Morning.');
    BEGIN prc_send_mail('[email protected]','[email protected]','Good Morning.'); END;
    ERROR at line 1:
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at "SYS.UTL_SMTP", line 17
    ORA-06512: at "SYS.UTL_SMTP", line 96
    ORA-06512: at "SYS.UTL_SMTP", line 374
    ORA-06512: at "SCOTT.PRC_SEND_MAIL", line 19
    ORA-29278: SMTP transient error: 421 Service not available
    ORA-06512: at line 1.
    Please tell me how to solve this problem.
    Thank You.

    1) Why did you install an SMTP server locally and then tell your code to try to use the server mail.google.com?
    2) The error you're getting is from mail.google.com indicating that Google isn't running an open SMTP server there. I would be very surprised if Google were running a publicly available SMTP server anywhere since that would be an invitation for spammers.
    Justin

  • Is there a way to control the number of concurrent SMTP connections on Database Mail?

    Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
    Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
    We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
    Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

    Hi rkohler,
    Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
    of concurrent connections.
    There is similar issue about database email on SQL Server 2005, you can refer to the following post.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • SpamAssassin / Amavisd tuning - TCP active open: Failed connect() errors

    I started this post as we were experiencing a problem with occassional delayed mail delivery to our mail store. As I continued writing it, I think that I've resolved it. But I wanted to post this anyway so if I'm doing things right it might help someone else; or, if I'm doing something wrong someone can correct me. :) For reference, we have a quad Sun v440, and process about 500,000 messages a day.
    We were seeing messages like this in our log files:
    09-Nov-2006 08:28:09.37 tcp_scan Q 1 [email protected] rfc822;[email protected] @tcp_scan-daemon:[email protected] TCP active open: Failed connect() Error: Connection timed out
    example.com represents our local domain. The errors seemed to occur proportionally to the amount of incoming mail we received. That is, we saw more of them under load.
    We are running SpamAssassin, Amavisd/clamav, and:
    Sun Java(tm) System Messaging Server 6.2-5.01 (built Nov 22 2005)
    libimta.so 6.2-5.01 (built 11:57:57, Nov 22 2005)
    SunOS hostname 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Fire-V440
    This line seems to say that the message is in the tcp_scan channel, and cannot send to 127.0.0.1:10024 (amavisd) because that port isn't listening.
    My amavisd max_servers was set at 15. After reading http://www.ijs.si/software/amavisd/amavisd-new-magdeburg-20050519.pdf and making a wild guess, I increased it to 30. The errors were less frequent, but still occurred.
    The output of 'sar -d' showed that my local disk was experiencing upwards of 80% utilization. I moved the amavisd temp directory and the spamassassin bayes db to a san volume, and that sped everything up dramatically. The connect errors went away, clamav avg time per message is at 4 seconds down from 10. I am now receiving errors from spamassassin that say:
    Nov 9 10:27:27 hostname.example.com spamd[21601]: prefork: server reached --max-children setting, consider raising it
    My --max-children is set to 25 right now, and the server is cpu bound under heavy load, so I see no reason to raise it.
    So this is my setup. I am no longer having an immediate problem, but comments/questions are welcome.
    Config files related to my setup are below.
    Excerpts of imta.cnf:
    ! tcp_scan
    [] $E$R${tcp_scan,$L}$U%[$L]@tcp_scan-daemon
    ! ims-ms
    ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL destinat
    ionspamfilter1 fileinto $U+$S@$D
    ims-ms-daemon
    ! tcp_local
    tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL saslswitchchannel tcp
    auth maytlsserver maysaslserver missingrecipientpolicy 0 aliasdetourhost tcpscan-daemon
    tcp-daemon
    ! tcp_intranet
    tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL allowswitchchannel saslswitchchannel tcp_auth
    maytlsserver maysaslserver missingrecipientpolicy 4 aliasdetourhost tcp_scan-daemon
    tcp_intranet-daemon
    ! tcp_scan
    tcp_scan smtp single_sys subdirs 5 notices 1 backoff "pt10m" "pt30m" "pt2h" "pt4h" dequeue_removeroute maxjobs 7 pool SMTP_POOL daemon
    [127.0.0.1] port 10024
    tcp_scan-daemon
    option.dat:
    SPAMFILTER1_LIBRARY=/opt/sunjes/SUNWmsgsr/lib/libspamass.so
    SPAMFILTER1_CONFIG_FILE=/opt/sunjes/SUNWmsgsr/config/SpamAssassin
    SPAMFILTER1_STRING_ACTION=data:,require ["addheader"]; addheader "Spam-test: $U"; require "fileinto"; fileinto "Junk";
    SPAMFILTER1_OPTIONAL=1
    dispatcher.cnf:
    [SERVICE=SMTP-SCAN]
    DEBUG=-1
    PARAMETER=CHANNEL=tcp_scan
    PORT=10025
    IMAGE=IMTA_BIN:tcp_smtp_server
    LOGFILE=IMTA_LOG:tcp_scan-server.log
    STACKSIZE=2048000
    INTERFACE_ADDRESS=127.0.0.1
    SpamAssassin:
    host=127.0.0.1
    port=783
    debug=0
    mode=1
    field=
    verdict=Junk
    USE_CHECK=0

    Suggest dropping Amavis in preference to the built-in
    integration, per our documentation. Simpler, more
    performant.Sorry, my title wasn't very accurate. We are running SpamAssassin through the built in integration, and clamav through amavisd. There isn't any built in integration to clamav, is there?

  • ORA-29279: SMTP permanent error: 554 5.5.1 Error: no valid recipients

    Hi ,
    Following error msg coming when notification was sending to mail .
    ORA-29279: SMTP permanent error: 554 5.5.1 Error: no valid recipients
    Please advise how to clear this error.
    Thanks&Regards
    Ranganath Konikineni

    It's not related to oracle. Check How you made the connection with SMTP server and to whom you are sending the mail.
    Post your code with tag like {noformat} Your lines of code {noformat}                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Mail Error: ORA-29278: SMTP transient error: 421 Service not available

    I write process to send mail, it is running ok, but I have error ORA-29278: SMTP transient error: 421 Service not available.
    SMTP Host Address : localhost
    SMTP Host Port : 25
    When I connect to database as SYS and run : exec apex_mail.push_queue result is :
    Pushing email: 1225814842675154
    Pushed email: 1225814842675154
    PL/SQL procedure successfully completed.
    Please explain me what is happened!

    Hi;
    What is DB version?
    Please see:
    From Master Note For PL/SQL UTL_SMTP and UTL_MAIL Packages [ID 1137673.1] check Note 604763.1 "ORA-29278: SMTP transient error: 421 Service not available" When Using UTL_SMTP to Send Email.
    Regard
    Helios

  • Connection error in mail_logs

    Hello,
    since some days I have a lot of entrys like this in my mail_logs:
    Tue Feb 12 12:23:31 2008 Info: Connection Error: DCID: 32131664 domain: 7-11.com IP: 199.196.10.25 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:31 2008 Info: Connection Error: DCID: 32131666 domain: www.yangzhou.cn IP: 61.177.180.12 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:31 2008 Info: Connection Error: DCID: 32131667 domain: alzinger-vogel.de IP: 81.3.54.34 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:31 2008 Info: Connection Error: DCID: 32131668 domain: zedpointrecruiters.com IP: 209.62.20.192 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131669 domain: thinkmachine.net IP: 64.69.68.141 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131827 domain: mm-outgoing-107.amazon.com IP: 207.171.178.142 port: 25 details: 421-'SMTP service not available, closing transmission channel' interface: 192.168.0.10 reason: unexpected SMTP response
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131670 domain: dssop.com IP: 213.171.192.236 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131671 domain: d055108.adsl.hansenet.de IP: 80.171.55.108 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131672 domain: sexatlas.com IP: 216.130.185.4 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131673 domain: dannowicki.com IP: 66.246.195.42 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131674 domain: curvanti.rw IP: 64.18.138.88 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131675 domain: audioforums.com IP: 66.249.253.49 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131677 domain: orgyhome.net IP: 8.15.231.104 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131678 domain: huw.cn IP: 218.85.137.147 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131679 domain: jieke.com.cn IP: 202.165.98.232 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131680 domain: 263.com IP: 211.100.28.126 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    Tue Feb 12 12:23:32 2008 Info: Connection Error: DCID: 32131681 domain: aaaaa.com.tw IP: 211.21.231.130 port: 25 details: timeout interface: 192.168.0.10 reason: connection timed out
    What is going wrong ?
    I checked in the gui in Outgoing Destinations, for this domains and I didnt find anything about this domains. Also isn't there not much more emails like before (it seems everything is ok). Only my mailservers are allowed to send emails over the appliance. But I didnt find anything at the mail servers in the logs.
    Thanks for any comment.

    Looks like you've got at least two different causes in there. You managed to connect to Amazon, but they hung up on you. That at least verifies that your network connectivity is working, but who knows why Amazon hung up on you.
    Most of the rest look like spam domains:
    sexatlas.com
    orgyhome.net
    263.com
    aaaaa.com.tw
    Spam domains typically don't run SMTP servers, so any mail sent to them will be undeliverable. You say that only your own mail servers are allowed to send via your appliance, but someone is injecting those messages. Look them up in your mail_logs to see where they're coming from.

  • ORA-29279: SMTP permanent error: To Send Mail from Oracle 10g (10.2.0.1)

    I have installed Oracle 10g (10.2.0.1) on Windows XP (SP2) machine at my home PC.There is a broadband connection on my home PC.I have installed UTL_MAIL package and then set SMTP_OUT_PARAMETER by the following SQL Statement.
    My machine IP address is 192.168.0.3
    SQl> alter system set smtp_out_server = 'smtp.bsnl.in:25' scope = 25;
    Then we run the following script.
    BEGIN
    UTL_MAIL.SEND(
    SENDER => '[email protected]',
    RECIPIENTS => '[email protected]',
    SUBJECT => 'Testing UTL_MAIL',
    MESSAGE => 'The receipt of this email means'||
    'that it works for UTL_MAIL'
    END;
    Then following error message comes.
    BEGIN
    ERROR at line 1:
    ORA-29279: SMTP permanent error: 553 Authentication is required to send mail as
    <[email protected]>
    ORA-06512: at "SYS.UTL_SMTP", line 21
    ORA-06512: at "SYS.UTL_SMTP", line 99
    ORA-06512: at "SYS.UTL_SMTP", line 222
    ORA-06512: at "SYS.UTL_MAIL", line 407
    ORA-06512: at "SYS.UTL_MAIL", line 594
    ORA-06512: at line 2
    Can anybody suggest the solution of the above problem.

    Hi,
    is your smtp server configured to use anonymous connection?
    Attackwave
    Reply Code       Description
    211      System status, or system help reply
    214      Help message [Information on how to use the receiver or the meaning of a particular non-standard command; this reply is useful only to the human user]
    220      <domain> Service ready
    221      <domain> Service closing transmission channel
    250      Requested mail action okay, completed
    251      User not local; will forward to <forward-path>
    252      OK, pending messages for node <node> started. Cannot VRFY user (for example, info is not local), but will take message for this user and attempt delivery.
    253      OK, <messages> pending messages for node <node> started
    354      Start mail input; end with <CRLF>.<CRLF>
    355      Octet-offset is the transaction offset
    421      <domain> Service not available, closing transmission channel (This may be a reply to any command if the service knows it must shut down.)
    450      Requested mail action not taken: mailbox unavailable [for example, mailbox busy]
    451      Requested action terminated: local error in processing
    452      Requested action not taken: insufficient system storage
    453      You have no mail.
    454      TLS not available due to temporary reason. Encryption required for requested authentication mechanism.
    458      Unable to queue messages for node <node>
    459      Node <node> not allowed: reason
    500      Syntax error, command unrecognized (This may include errors such as command line too long.)
    501      Syntax error in parameters or arguments
    502      Command not implemented
    503      Bad sequence of commands
    504      Command parameter not implemented
    521      <Machine> does not accept mail.
    530      Must issue a STARTTLS command first. Encryption required for requested authentication.
    534      Authentication mechanism is too weak.
    538      Encryption required for requested authentication mechanism.
    550      Requested action not taken: mailbox unavailable [for , mailbox not found, no access]
    551      User not local; please try <forward-path>
    552      Requested mail action terminated: exceeded storage allocation
    *553      Requested action not taken: mailbox name not allowed [for example, mailbox syntax incorrect]*
    554      Transaction failed

  • ORA-29278: SMTP transient error: 421 Service not available

    Hi all,
    I'm using Oracle 10g working on Windows XP Home.
    I'm trying to send a basic mail from my stored procedure.
    When I tried to run the code, I get ORA-29278: SMTP transient error: 421 Service not available.
    Below is the code I'm trying.
    CREATE OR REPLACE PROCEDURE SEND_MAIL (
    msg_to varchar2,
    msg_subject varchar2,
    msg_text varchar2 )
    IS
    c utl_smtp.connection;
    rc integer;
    msg_from varchar2(50) := 'Oracle9.2';
    mailhost VARCHAR2(30) := '127.0.0.1'; -- local database host
    BEGIN
    c := utl_smtp.open_connection(mailhost, 25); -- SMTP on port 25
    dbms_output.put_line('ok');
    utl_smtp.helo(c, mailhost);
    utl_smtp.mail(c, msg_from);
    utl_smtp.rcpt(c, msg_to);
    utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
    'To: ' || msg_to || utl_tcp.crlf ||
    'Subject: ' || msg_subject ||
    utl_tcp.crlf || msg_text);
    utl_smtp.quit(c);
    EXCEPTION
    WHEN UTL_SMTP.INVALID_OPERATION THEN
    dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
    WHEN UTL_SMTP.TRANSIENT_ERROR THEN
    dbms_output.put_line(' Temporary e-mail issue - try again');
    dbms_output.put_line (sqlerrm);
    WHEN UTL_SMTP.PERMANENT_ERROR THEN
    dbms_output.put_line(' Permanent Error Encountered.');
    END;
    Below are the possibilites I tried..
    I tried to ping localhost.. This is the output I get
    C:\Documents and Settings\Me>ping localhost
    Pinging polasa [127.0.0.1] with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    In one of the thread, a user suggested to do the following
    Go to Control Panel->Add or Remove Programs->Click on
    Add/Remove Wndows Components
    Check IIS check box.
    Select Internet Information Service (IIS) option and click on Details button
    Check whether SMTP Service is checked or not.
    If not selected then select SMTP check box.
    This process should be done on server.
    It will help out from ORA-29278: SMTP transient error: 421 Service not available
    problem.
    There is no IIS in my Windows Components..
    Any suggestions? Thanks in advance

    It sounds like you don't have an SMTP server running on your local machine.
    Even if you install IIS (or some other SMTP server), that is probably not enough to send email outside of your machine because your machine is unlikely to be trusted by the downstream mail servers. If you are running this in a company, you'll need to talk to your company's mail admin to determine where the corporate SMTP server is running. If you running this at home, you'll need to find out from your ISP what SMTP servers are available to you.
    Justin

  • [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.

    Hi Experts,
    When I use Agent functionality to send email in BIEE 11.1.1.7.0, it will generate the following error message as below:  Are you facing the same problem ? Please help me,Thanks very much.
    Global Error: [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.
    Error Codes: AXSBMN8D:
    The operation completed successfully.

    Can you try doing telnet to SMTP server from where BI server is installed and let us know the outcome.Just want to check if any firewall is blocking
    telnet hostname portnumber
    Thanks,

Maybe you are looking for

  • MSI G4Ti-4200 problem

    Hey all, hope you can help me out. Having some major problems with installing the Ti4200 64 card on my system. My system continually crashes with it and no games or programs run for very long, freezing or just not loading, due to lack of virtual memo

  • Older canon ZR 85 won't show up on newish imac through 8 pin fire wire

    imac 2.93intel2 and running OSX10.6.2. trying to upload video from older canon ZR 85. this means the newer 8 pin firewire. camera will not show up on imovie9. is the 8 pin firewire supported with the older camera? do I need a 6 pin and an adapter?

  • Wild car in internal table loop

    Hi, This is for NW 7.0 EHP1 on Oracle. Can I use wild card search criteria like '%ABC%' in internal table loop as shown below. LOOP AT where itab1-objname LIKE '%ABC%'. END. The above is just sample and it is not a correct statement as it gives me sy

  • Is there any way to convert 27 cinema to dvi?

    is there any way to do this? driving me nuts trying to google a way. have a non thunderbolt 27 in (looks like the thunderbolt one)

  • PDF edit

    Hi there I've filled out a pdf-editable form and email it to someone using windows system. He opened the file and it was blank. He then filled out the form and emailed me back and I also see blank form. Is it to do with the form design? This problem