SMTP Email Alerts with RVS4000

Hey everyone,
We recently changed mailservers and now I can't get our RVS4000 to email logs via SMTP. We just started using google apps, which run SMTP through port 587 and require authentication. Is there any way of getting the RVS4000 to use a non-standard port for SMTP? Thanks for any help or insight you can offer.
-matthaus

Check this link.

Similar Messages

Prime Infrastructure 2.0 email alerts with hostname?

I have configured email alerts however in the message it shows up with the IP address instead of hostname.
Is there a way to configure the hostname to be added? Custom text or adding the switch differently (added by direct IP search)?
Thanks,
Chris

I see now, this is a poor carry over from NCS. The option that says include "controller" in email does provide the switch hostname. Hopefully by version 3.0 they will have all the wireless naming fixed when it applies to converged.
Thanks Rob!

Email Alert with data from payload SAP PI 7.0

Hi,
i have a requirement to send an email alert when a Purchase Order Transmission fails through PI. In the email i need to send PO number which had failed.
Format is:
Subject- PO # XXXXXXX failed to reach XXXTarget
in the mail content i need to mention the error and why the error occurred.
Please tell if this is possible in SAP PI 7.0 If yes then How?
Regards,
Ashwani

Hi,
If the message fails in in mapping, you can send the alert with PO number in the email. Steps would be following.
Catch the execpetion
Call RFC SALERT_CREATE by passing required parameters
You can also pass the PO number as one of the value which will can be used in you alert category
PO number can be used as one of the Alert container
But if the message fails in adapter engine you cannot send the PO number in the email. You can just send email with standard alert containers.

Desktop email alert with outlook 2013 in windows 7 no skype

I recently Upgraded from office 2010 to office 2013 running on windows 7 Enterprise in my office Laptop, I do not have Skype installed in my laptop and I don't receive any email alert notification or either sound. I am using outlook 2013 with Exchange
account, what should I do ?
Regards,
Praveen

Hi,
Do you mean there is no Skype App after installing Office 2013?
Did you custom install Office 2013 without checking Skype app?
Thanks
Mavis
Mavis Huang
TechNet Community Support

I can't email alerts with calendars

At the moment of setting up the an email alert, calendars does not allows me to set an email. There is no email and calendars opens a pop up window error saying there is no email.

I just figured it out! I set the email account I am using to try to send the photos as my default account by going to General > Settings > Mail > scrolling down to Default Account. Mine was set as my iCloud account. I switched it to gmail and now I can send photos.

EEM- Email alert with IP SLA Based on Packet Loss

hi joseph,
i need your advise, i want to get alert email based on IP SLA Packet loss
the scenarion as below :
1. If the traffic hit threshold packet loss greater than 20% as long 15 minutes --> send email
2. If reset condition packet loss eq 0% as long 15 minutes --> send email again
I don't know how to configure it condition. could you help me to verify my configuration below?
ip sla logging traps
ip sla 1
icmp-jitter 10.216.0.105 source-ip 10.216.0.107 num-packets 100 interval 40
frequency 50
ip sla schedule 1 life forever start-time now
ip sla reaction-configuration 1 react Packetloss threshold-value 3 1 threshold-type immediate action-type trapOnly
ip sla enable reaction-alerts
event manager applet TEST
event syslog pattern "IP SLAs$1$: Threshold exceeded"
action 2.0 mail server "10.240.0.10" to "[email protected]" from "[email protected]" subject "Alert for Intermittent Link" body "link intermittent in x %"
thank you

What's you have could work with a few modifications. First, increase that threshold-value of 3 to 20. You can leave the falling threshold value of 1. You'll need to add another applet to match the falling threshold syslog message. Not sure exactly what that one will look like.
The first applet will look like this:
event manager environment q "
event manager applet ipsla-threshold-exceeded
event syslog pattern "IP SLAs$1$: Threshold exceeded"
action 001 cli command "enable"
action 002 cli command "config t"
action 003 cli command "no event manager applet ipsla-healthy"
action 004 cli command "event manager applet ipsla-unhealthy"
action 005 cli command "event timer countdown time 900"
action 006 cli command "action 1.0 mail server $q 10.240.0.10$q to $q [email protected]$q from $q [email protected]$q subject $q Alert for Intermittent Link$q body $q link intermittent in 20 %$q"
action 007 cli command "action 2.0 cli command enable"
action 008 cli command "action 3.0 cli command $q config t$q"
action 009 cli command "action 4.0 cli command $q no event manager applet ipsla-unhealthy$q"
action 010 cli command "action 5.0 cli command end"
action 011 cli command "end"
And the second applet (the one where you'll need to fill in the appropriate syslog pattern) will look like:
event manager applet ipsla-threshold-normal
event syslog pattern "FALLING THRESHOLD PATTERN HERE"
action 001 cli command "enable"
action 002 cli command "config t"
action 003 cli command "no event manager applet ipsla-unhealthy"
action 004 cli command "event manager applet ipsla-healthy"
action 005 cli command "event timer countdown time 900"
action 006 cli command "action 1.0 mail server $q 10.240.0.10$q to $q [email protected]$q from $q [email protected]$q subject $q Link is stable$q body $q Link has been stable for 15 minutes$q"
action 007 cli command "action 2.0 cli command enable"
action 008 cli command "action 3.0 cli command $q config t$q"
action 009 cli command "action 4.0 cli command $q no event manager applet ipsla-healthy$q"
action 010 cli command "action 5.0 cli command end"
action 011 cli command "end"

Email alert with 6 email accounts

For the love of God how do I setup my phone to alert me (make a sound) when I receive an email on any of my mailbox? For some weird reason, it only alerts me on the primary and secondary mailbox on main screen.
Please don't tell me that this ain't possible, I'm going to throw this piece of sh** out the window!
First I lost the tap and turn, then a lot of features on the manual that is not on the PHONE! Like the out of the office reply! And mailbox renaming!
I should have sticked with my G1

You did not mention the phone model, but I assume it is a S6v3. In this case, this is the situation:
- you cannot have more than 6 E-mail accounts
- you cannot set more than 2 E-mail addresses for auto-retrive
- you cannot get alert from more than 2 E-mail addresses
Maybe someone else knows better, but this is my expeience. Obviously, you won't find these limitations in the specs or User Manual.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

SMTP email function with authentication

Hi need help on the SMTP function...I need to set the user name and pass word for sending email out..how to do tis?

Search

CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr

I am trying to configure my CCMS alerts on my satellite systems to be linked into the Solution manager system (acting as the CEN monitoring node). If I have already setup my RZ20 alerts, is there a way I can just link these into Solution Manager.
Thanking you for your suggestions

Try setting up the monitoring RFC connections in SMSY. Once those are setup, you can pull the CCMS data in and view within tran SOLUTION+MANAGER.
If you need more detail, just update this message.
Thanks,
J. Haynes

Notification Email/Alert - Including Job execution details(step output)

Hi,
I am using Oracle 10g R2 GRID Control on Windows. I would like to add the execution details to the default notification (Long)emails. Is there any possibility without adding any code in current version or later version to include step output(failed/Passed details)?
Thaks for your help.

I am already getting notification email/alert with just status failed/succeded. But I want to include the step output(job execution details) to that default email given by Oracle. I could write PL/SQL block to manipulate this,but looking for default way to include these details in any version?

Alert with email

Hi,
when I want to send an alert with email, is it necessary to configure smtp-server in transaction "SCOT"?
Which are the necessary steps for this?
Thanks in advance.
Regards
Stefan

Hi Stefan,
If you have already configured the alert rules then you just need to configure SAP connect and maintain the e-mail address for all the users attached to your alert category. You can go to transaction SU01 and maintain e-mail address for the each user attached to the alert category and the e-mails will automatically be sent if SAP connect is configured.
Refere the link below for SAP connect configuration.
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
You will need to set the flag under the RWB for e-mail as well. You will need to login the RWB for each user and go to Alert Inbox - Personalization. Under the Time-Independent Delivery you will to check the box "Mail" as well.
Also check Michal's blog on Alert Config:-
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Hope this provides you a solution.
Regards.
Praveen

Executable build failing with no error message with smtp email VIs

I have a VI which I want to build into a .exe which will be used as an HMI for a real-time system. I am using the SMTP VIs to text/email me various notifications about the system state. The main VI works fine if run but will not build into an .exe. The error message comes back blank so no help there (LabView 2010). If I just simply disable the portion of the code in the HMI.VI which contains the email VI code, the application builds. I searched for anwers and was unable to resolve the problem. Any ideas? Do I need to include anything in the build that is specific to the LabView SMTP VIs? I'm new to building .exe's so I appologize for any rookie mistakes I may have made.
Thanks.

mikeporter wrote:
You said you searched for answers (on the forum?).
Yes.
What did you find?
I found a bunch of topics on email send errors after the application was built but nothing related to .exe building failures (related to the SMTP/email VIs). I also found topics dicussing the bug that fails to report an (any) error during the .exe build (for 2011). The solution was to install the service pack. if that's my problem then I will have to go through the motions to get that done (corporate computers / lack of persmissons and such).
What have you tried? This question has been answered many, many, many times.
I tried what I stated in the OP. If I disable the portion of the code which contains the email SMTP VIs, the application builds, otherwise, the build fails and no error code or description is given.
PS: probably has nothing to do with the SMTP drivers, per se.
If the answer has been given many, many times, then I appologize for not being able to find it before posting. Trust me, the last thing I want to is waste my time fishing for answers on the forum, especially when I get a response from forum members who would rather point out that my mis-identified problem has been answered many, many times, rather then just helping me out.

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent wit

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent with slightly different versions of the same address (see my previous post). Heating someone else's suggestion I created a workflow file to send an email and calling that file from an alert on my calendar. This is working and sends only one email to the client.
My calendar is on I cloud and I access it from three different computers so I can keep my appointment calendar current. The files that send the email only exist on one computer. My other computers show error messages when those emails get sent. It seems that each computer wants to send the email. It's a small problem but is there a way that I could not get those alerts.
But appreciate any thoughts about this. It seems like both problems might be related to the iCloud system.
Thank you in advance,
Michael

Good work, catch so far Michael, does seem to be a "feature" of iCloud syncing, not sure what you could do to disable it.

A problem with email alerts in management services of Azure portal

Hi,
I have created an alert with email notification on a custom performance counter using the management services of Azure portal.
Currently the alert is in active state (and has been so for several hours), but i haven't received any email.
Can someone please advise on this issue?
Thanks,
Roi

Do you have an endpoint for the service. To enable endpoint monitoring, go to the
dashboard page for the associated resource and edit the
Endpoints setting in the
monitoring section, see figure 1. If you have an endpoint, try disabling and enabling the alert in the management tab.
figure 1.
Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

Alerting with Content Master Conversion Agent via Email Adapter

Hi all,
my question is: is it somehow possible to have the alerting also with EMail Scenario and Content Master? i am on SP 14 and in my alert rule there is no restriction. But when i make a restriction on adapter, the mail adapter is not available.
So, Alerting with Email Adapter is not possible??
Thanx a lot, folx,
Felix

Hi Felix,
I have been trying to configure alerts using NO RESTRICTION. When i try to trigger my alerts using the report RSALERTEST, message is sent to my alert inbox.
But, when any error occurs on my Integration Engine or Adapter Engine, the alert is not triggered.I am on SP14.
Is there any additional configuration that needs to be done for the same?? Are you able to get ALERTS in your inbox whenever anything fails in your Integration Engine or Adapter Engine.
It would be very helpful if you could answer this query.
regards,
bhavesh

SMTP Email Alerts with RVS4000

Similar Messages

Maybe you are looking for