SMTP error issues

SMTP Error: [554] 5.7.1 <END-OF-MESSAGE>: End-of-data rejected: user not permitted to relay. I get this when trying to send an email from [email protected]
Please help

Hi,
The email account was suspended due to multiple activity of spam, I have removed the limitation for now, so it should be fine now.
Do let me know if you have any question.

Similar Messages

JES Messenging Server (v6.0) issues: SMTP Error: 4.0.0

Hi,
We've successfully installed Directory Server 5.2, Indentity Server 6.1, Application Server 7.0 update 1, Web Server 6.1 and Calendar Server 6.0 on a Solaris 8 system.
This system is intended for test purposes, hence all the applications are on one system. The production system will be installed on seperate systems as per Sun's recommendations.
Apropos Messenging Server (v6.0)
When I log into the the Web interface I get:
"Quota root does not exist"
If I try to send a message to a local user from the Web interface I get:
"SMTP Error: 4.0.0 temporary error returned by alias expansion: [email protected]"
I get a similar error if I try to mail a local user from outside:
220 trabant.acc.graddelt.com -- Server ESMTP (Sun ONE Messaging Server 6.0 (built Oct 29 2003))
HELO zen.sys.uea.ac.uk
250 trabant.acc.graddelt.com OK, [192.168.104.92].
MAIL From: <[email protected]>
250 2.5.0 Address Ok.
RCPT To: <[email protected]>
452 4.0.0 temporary error returned by alias expansion: [email protected]
When we installed Messenger Server, we selected Schema v2 from comm_dsetup.pl. We would like to use Messsenger Server with Identity Server.
Any suggestions as to how to overcome this issue would be most welcome.
Thanks
Shaun McCullagh
marviQ
Amsterdam

I am getting this error when I sent a mail from Sun Jav messenger express.
SMTP Error:4.0.0 temprorary error returned by alias expension:
how ever , i am able to receive the mails .
I have created one user [email protected] and configured it's account at MS outlook , this user is able to sent the mails to default account [email protected] ,Also [email protected] is obtaining the mails ,On replying to same mail i am getting SMTP error as given above.
what goes wrong ...? any idea...?
FYI...
root@ultra5c # /opt/SUNWmsgsr/sbin/./start-msg
Connecting to watcher ...
Launching watcher ...
Starting ens server ... 1461
Starting store server ...... 1462
checking store server status ........ ready
imap is running already
pop is running already
Starting http server ............................ 1463
Starting sched server ... 1473
Starting dispatcher server .............. 1475
Starting job_controller server ................ 1479
root@ultra5c # ping 192.168.0.64 110
192.168.0.64 is alive
root@ultra5c # ping 192.168.0.64 25
192.168.0.64 is alive
Rgds
chandan

Mailer object error message "SMTP: invalid from address. SMTP error 530 5.7.0 Must issue a STARTTLS command first. d5sm35857280yhl.19".

I am trying to send an email from Lookout V6.6 using the Mailer object. I have an email address setup through GMAIL and have verified it works. Also, Lookout Mailer object is able to verify GMAIL server. I get the following error message when trying to send the email: "SMTP: invalid from address. SMTP error 530 5.7.0 Must issue a STARTTLS command first. d5sm35857280yhl.19". Anyone know what is causing this?

Another method is to use a SMTP relayer, we have deployed them in the past.
http://www.hmailserver.com/index.php?page=welcome
Mike
Forshock - Consult.Develop.Solve.

Smtp error

Dear all,
Running Iplanet Messaging server 5.2 P1.While sending a message in webmail when i click on send i get the message smtp error.After going through the logs i found the following entries
tcp_local Q 9 rfc822;min@kathatraveline
s.com [email protected] TCP active open: Failed connect() Error: Connec
tion timed out
22-Jul-2005 21:31:25.00 tcp_local Q 10 rfc822;Dwight@zarifitnes
s.com [email protected] TCP active open: Failed connect() Error: Connect
ion timed out
I have checked that the functionality of the dns and it is working fine.there is no issue with our network also..Can anyone throw some light on this.
Thanks in advance

If you get an error in webmail every time you click "send", that means that either:
1. your service.http.smtphost or service.http.smtpport is incorrect. These default to your local store system, but if they've been changed to point to some other box, that box isn't responding
or
2. Your store box isn't correctly configured to accept mail from "localhost".
The message you find from the MTA is totally unrelated. That message is telling you that when Messaging Server attempted to send to the address outside your network, that connection wasn't made, the remote server timed out.
The remote server could be down, or simply not running a mail server at the time the message attempt was made. "Q" means, we reQueue the message, and try again, later,using the "backoff" settings.

SMTP error from remote mail server after initial connection:

Hello folks. I having some serious issues sending email to clients with .mac accounts. I keep on getting the following error. Can someone help? I have replaced email address names with "Blank@...) for obvious reasons.
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
SMTP error from remote mail server after initial connection:
host smtp-mx1.mac.com [17.148.20.64]: 452 try later:
retry timeout exceeded
------ This is a copy of the message, including all the headers. ------
Return-path: <[email protected]>
Received: from ip72-207-229-240.br.br.cox.net ([72.207.229.240] helo=[192.168.0.102])
by srv3.purenrg.com with esmtp (Exim 4.68)
(envelope-from <[email protected]>)
id 1JFeOb-0001FZ-5F
for [email protected]; Thu, 17 Jan 2008 18:43:41 -0500
Message-Id: <[email protected]>
From: "[email protected]" <[email protected]>
To: Cindy Barnes <[email protected]>
Content-Type: multipart/alternative; boundary=Apple-Mail-3--1032078955
Mime-Version: 1.0 (Apple Message framework v915)
Subject: invoice 520 is overdue
Date: Thu, 17 Jan 2008 17:43:40 -0600
X-Mailer: Apple Mail (2.915)
X-PopBeforeSMTPSenders: [email protected]{
--Apple-Mail-3--1032078955
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
Content-Transfer-Encoding: 7bit

I'm sure someone will give more detail, but it looks like the server blocked your address because it thinks it's a spam source. If you're not spamming, then it might be someone on the same network spamming, or malware on your computer doing it. Or it could just be a mistake. try calling whoever runs your mail server and see if they can give you more information.

When I try to send an email message I get smtp error(535) Authentication failed

I use the email from Stevens Inst. of Tech. I can receive messages,but when I try to send one I get the message: SMTP Error (535) Authentication failed. When I try the same thing in Chrome, I have no problem.

Contact your e-mail provider.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
I looked up the error on a search engine.
http://www.bing.com/search?q=SMTP%20Error%20%28535%29
Check that you are using the correct user / password.

UTL_SMTP and SMTP-Error: 530 Authentication required

Hi,
I wanna use the utl_smtp-package and while testing the example of the 9i-documentation, I got the error:
ORA-29279: Permanent SMTP-Error: 530 Authentication required
The only help I found was the sentence in the docu:
530: Must issue a STARTTLS command first. Encryption required for requested authentication mechanism.
What does it mean and how can I avoid this error?
It's true, that my smtp-account of my provider needs an authentication (pop3 before smtp!)
Thanx a lot!
Wolfgang

Hey, Community Girl! I just spent 2 days ripping my hair out over this same issue... The answer was maddeningly simple/stupid. In Outlook... they ASK for your "user name" and "Password" (on the More Settings Tab). What they
actually WANT is your "email address" NOT your "user name", followed by your password. This is easy.. I hope it works the same for you.
In Outlook, go to Tools, Email Accounts, View or Change, click Next. Highlight account information and click change. In the lower right of the page... Click More Settings.
Click the Outgoing Server Tab.
Check the My outgoing server SMTP requires authorization.
Check Log on Using:
User Name: Do NOT type your user name here... type your email address!
Password: Type in your password.
Check the Remember password box. OK
That one small change FIXED 2 days of hair pulling on my part... I hope that does it for you too.
Let me know... I'd be interested if you fixed it. Wish they had actually asked for what they wanted... User Name or Email Address ARE two different things! Good luck!
South Texan, you're a genius! This 530 Authentication error has plagued me for 3 years now; when I call my internet service, they say it's a router firewall issue; when I call them, they say it's not their issue. Changing the User Name field to
my email address instead of my user account name worked!!!!! Thank you!!

SMTP Connection issue

I have a fresh install of Yosemite on a mid 2011 Macbook Air. I am trying to setup Mail app for my email accounts. When I get one setup there is an SMTP connection error. I also downloaded and installed thunderbird and setup the account on there with no SMTP errors. This seems to be an issue with Mail SMTP. Any help with this would be great.

I note that you have made similar posting that all seem to be related to the same problem you are having. It's better to make the one post and wait for someone to respond.
What have you attempted to do so far to get Mail working again? No point in me making a suggestion which you've already tried.
Chris

E-mail sending from PL/SQL fails with SMTP error 550 must check for new....

We have a issue like this. We have a e-mail program (PL/SQL stored procedure which is called from a 10g R2 form) which sends e-mails using UTL_SMTP. It was working but suddenly from day-before-yesterday stopped working. Mail admin says he did not change any mail server paras.
The DB is in Linux so is the mail server. We finally did a code change. Now the mail goes to SMTP server but the mail does not go out of it (to a gmail address). We did a trace of the SMTP log and found out that it throws *550 [email protected] must check for new mail first* .
Here is the SMTP server log:
[192.168.0.6:25]
Wed 2012-04-25 18:52:46: --> 220 suninsurance.com.fj ESMTP MDaemon 12.5.4; Wed, 25 Apr 2012 18:52:46 +1200
Wed 2012-04-25 18:52:46: <-- HELO 192.168.0.6
Wed 2012-04-25 18:52:46: --> 250 suninsurance.com.fj Hello 192.168.0.6, pleased to meet you
Wed 2012-04-25 18:52:46: <-- MAIL FROM:[email protected]
Wed 2012-04-25 18:52:46: --> 250 <[email protected]>, Sender ok
Wed 2012-04-25 18:52:46: <-- RCPT TO:[email protected]
Wed 2012-04-25 18:52:46: --> 550 [email protected] must check for new mail first
Wed 2012-04-25 19:02:45: Connection timed out!
Wed 2012-04-25 19:02:45: SMTP session terminated (Bytes in/out: 96/256)
Wed 2012-04-25 19:02:46: ----------
Wed 2012-04-25 19:20:11: Session 17159; child 1What could be the problem here? Any help would be greatly appreciated.

Finally figured out the problem and fixed it. Now it is working.
*"must check for new mail first"* means that before sending mail you have to check your mails (i.e. download) your mails first from the mail server, because the normal setting is for SMTP servers is that you can send mail only if you received a mail. So, when you receive a mail (i.e. check mail), your IP is recorded in the SMTP server log. Now if you send a mail, only mails with the IPs which has received any mail will be allowed to send mails outside.
In order to only a send a mail without receiving any mail first you have to use SMTP authentication.
I.e. After
c := utl_smtp.open_connection(p_smtp_host, p_smtp_port);
utl_smtp.EHLO(c, p_smtp_host); You have to give UID/PWD for the SMTP server like this:
utl_smtp.command( c, 'AUTH LOGIN');
utl_smtp.command( c, utl_raw.cast_to_varchar2( utl_encode.base64_encode( utl_raw.cast_to_raw( p_un))) );
utl_smtp.command( c, utl_raw.cast_to_varchar2( utl_encode.base64_encode( utl_raw.cast_to_raw( p_pwd))) );However, when we sent like this we got a another SMTP error:
554 Message is not RFC compliant; missing "Date" header To solve this do this: Go to Setup -> Default Domain & Servers, Servers, uncheck ...refuse
messages which are not RFC compliant. That will allow MDaemon to accept the malformed messages without date headers..Doing this solved the problem. Now we can send mails to outside mail boxes (like Gmail). In Gmail, when we checked the inbox there was no mail. It had gone the Spam folder. This is also important since you have to check the spam folder since Gmail will think it is spam. Once the mail is flagged as "not spam" it will start coming to your inbox.

Wife can't send or receive Yahoo/Verizon email, I get non-deliver reports with an smtp error.

My wife hasn't been able to send *or* receive email, via the web or via POP3. When she tries to log into the Verizon/Yahoo mail web page she gets "Temporary Error 16" and when she tries to send mail from her OSX Mail application, it never leaves, even though Mail says it is connected to outgoing.yahoo.verizon.net
Worst, when I try to send her mail from another Verizon account, it comes back as undeliverable due to an SMTP error:
{edited for privacy}

Hello,
We apologize for the trouble. I sent you a private message so we can take a look at the issue.
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

SMTP error from remote mail server 522 IP REPUTATI...

I have a hosting business, and one of my clients on BTinternet, using BT Mail is now having mail bounce back to sender when forwarded from her domain mailbox.
Here is an example of the bounced errors -
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
(ultimately generated from [email protected])
host mx.bt.lon5.cpcloud.co.uk [65.20.0.49]
SMTP error from remote mail server after MAIL FROM:<[email protected]> SIZE=3749:
522 IP REPUTATION BAD (please check for IP address listing on reputation services)
I've changed the actual addresses above. The server the mail is being forwarded from has an IP address 138.128.161.22
It seems that BT believes that the server the mail is forwarded from is blacklisted. However, I am unable to discover any blacklist issue for this server. As you can see from the MXToolbox enquiry, there are no blacklists reported -
http://mxtoolbox.com/SuperTool.aspx?action=blacklist%3a138.128.161.22&run=toolpage
Can anybody from BT tell me who I need to contact to find out why they are not accepting mail from my server? I'm not having a problem with mail forwarded to any other ISP, and it seems to be just BT that is rejecting the mail.
I hope someone can advise.
Myles

Hi @magicalwonders
Have a look at http://bt.custhelp.com/app/answers/detail/a_id/47055/kw/postmaster/c/346,6592/session/L3RpbWUvMTQyOD...
Also have a look at this post: https://community.bt.com/t5/Email/BT-Email-bounce-backs/m-p/1477146/highlight/true#M34004
Openwave messaging (was Critical Path) is the company who designed and implemented the BT consumer email system and platform may require you to correctly set up a SPF record.
Also have a look at:
https://community.bt.com/t5/Email/BTinternet-rejecting-all-our-emails/m-p/1480775/highlight/true#M34...
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Reg.SMTP Error while using UTL_MAIL in Oracle 10g

Hi,
I am getting the following SMTP error while trying to use the UTL.MAIL package of Oracle 10g. The query is as follows.
begin
utl_mail.send(
sender => 'NAVEEN',
recipients => '[email protected]',
subject => 'Testing utl_mail',
message => 'The receipt of this email means'|| ' that UTL_MAIL works'
end;
UTL_MAIL package is installesd and the port 25 is configured and firewall is changed.
The same block was working fine before 5 days and now is giving the error as
ORA-29279: SMTP permanent error: 501 badly formatted MAIL FROM user - no "<"
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 222
ORA-06512: at "SYS.UTL_MAIL", line 407
ORA-06512: at "SYS.UTL_MAIL", line 594
ORA-06512: at line 2
Could you please help me out how to proceed???
Regards,
Naveen Kumar.

Can you back that statement about an Oracle UTL_SMTP bug up with an actual bug number??
From what you have posted, this is not a bug!! but expected and documented (RFC'ed) SMTP server behaviour.
My proof:
/home/billy> telnet mail 25
Trying 165.143.128.26...
Connected to mail
Escape character is '^]'.
220 CNTRRA20-GTW01 [CNTRRA20-GTW01] Thu, 06 Mar 2008 14:26:26 +0200
HELO 10.251.93.58
250 CNTRRA20-GTW01 Hello [10.251.93.58]
MAIL FROM: naveen <[email protected]>
501 naveen <[email protected]> : illegal character(s) in domain string
MAIL FROM: NAVEEN
501 NAVEEN : domain string is NULL.
quit
221 CNTRRA20-GTW01 closing connection. Goodbye!
Connection closed by foreign host.
/home/billy>
As you can clearly see, the SMTP server expects a DOMAIN name as part of the MAIL FROM address. It also does not accept the alternative format suggested.
Yes, not all SMTP servers are equal and some support additional formatting.
But to imply that because the SMTP server does not accept your address formatted as string NAVEEN, it is a UTL_SMTP problem, sounds like a smelly one to me.

Can't send email on yahoo mail, keeps switching to windows mail and smtp errors ?

When browsing using Firefox if I try and send URL or email it automatically tries to send it on Windows Mail rather then the Yahoo mail I normally use, then windows mail can't send any email out saying smtp error. Can send yahoo mail fine ?

http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

I have suddenly got the following message An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has se

Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?

Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures.

IPM server Repository error issue..

Hi All,
We are using Invoice gateway for one opf our projects.
I could able to scan the hard copy and cretae a bacth.
OFR is creting the pdf, xml and txt file out of the scanned copy and keep it in a folder, so that IPM process them from then on.
Once IPM processes it and invoke BPEL for further action.
But IPM is throwig me the below error:
[2012-05-09T15:32:49.785+05:30] [IPM_server1] [ERROR] [TCM-00162] [oracle.imaging.agents] [tid: [ACTIVE].ExecuteThread: '2' f
or queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JSkzo^l5Ifs6wjZf6G1FeZj900000E,0] [APP: i
maging] [dcid: f05c270b0bae50db:-392a3bea:13730f9cd54:-7ff2-0000000000000d86] Failed to load Batch for new filing.
[2012-05-09T15:32:49.793+05:30] [IPM_server1] [ERROR] [TCM-00157] [oracle.imaging.agents] [tid: [ACTIVE].ExecuteThread: '2' f
or queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JSkzo^l5Ifs6wjZf6G1FeZj900000E,0] [APP: i
maging] [dcid: f05c270b0bae50db:-392a3bea:13730f9cd54:-7ff2-0000000000000d86] [arg: /u03/oracle/Middleware/user_projects/doma
ins/BBECM_DOMAIN/IPM/InputAgent/Input/Stage/TestCase_Invoice_316_204_09052012.txt] An error occurred filing file /u03/oracle/
Middleware/user_projects/domains/BBECM_DOMAIN/IPM/InputAgent/Input/Stage/TestCase_Invoice_316_204_09052012.txt.[[
oracle.imaging.ImagingException: TCM-00787: A repository error occurred.
faultType: SYSTEM
faultDetails:
ErrorCode = oracle.stellent.ridc.protocol.ServiceException, ErrorMessage = Unable to execute service IPM_LIST_IMAGI
NG_AGENTS and function QuserSecurityAttributeByType.
The error was caused by an internally generated issue. The error has been logged.
at oracle.imaging.repository.ucm.UcmErrors.convertRepositoryError(UcmErrors.java:128)
at oracle.imaging.repository.ucm.UcmAgentUserManager.getAgents(UcmAgentUserManager.java:77)
at oracle.imaging.repository.ucm.UcmAgentUserManager.ensureAgentUserPermissions(UcmAgentUserManager.java:29)
at oracle.imaging.repository.ucm.UcmRepositoryManager.connect(UcmRepositoryManager.java:411)
at oracle.imaging.repository.RepositoryManagerFactory.getInstance(RepositoryManagerFactory.java:172)
at oracle.imaging.repository.RepositoryManagerFactory.getInstance(RepositoryManagerFactory.java:57)
at oracle.imaging.repository.RepositoryManagerFactory.getInstance(RepositoryManagerFactory.java:91)
at oracle.imaging.application.ApplicationServiceImpl.getSingleApplication(ApplicationServiceImpl.java:516)
at oracle.imaging.application.ApplicationServiceImpl.getSingleApplication(ApplicationServiceImpl.java:467)
at oracle.imaging.application.ApplicationServiceImpl.getApplication(ApplicationServiceImpl.java:348)
at oracle.imaging.batch.BatchServiceImpl.loadApplication(BatchServiceImpl.java:348)
at oracle.imaging.batch.BatchServiceImpl.createBatch(BatchServiceImpl.java:70)
at oracle.imaging.inputagent.InputFilingMDB.loadBatch(InputFilingMDB.java:404)
at oracle.imaging.inputagent.InputFilingMDB.initializeFiling(InputFilingMDB.java:371)
at oracle.imaging.inputagent.InputFilingMDB.onMessage(InputFilingMDB.java:166)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
nvocation.java:182)
n.java:149)
tionInterceptor.java:131)
nInterceptor.java:119)
n.java:171)
ptor.java:89)
n.java:171)
tionInterceptor.java:131)
nInterceptor.java:119)
n.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy242.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
erSecurityAttributeByType.
The error was caused by an internally generated issue. The error has been logged.
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:125)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:101)
at oracle.imaging.repository.ucm.UcmResponse.<init>(UcmResponse.java:66)
at oracle.imaging.repository.ucm.UcmRequest.makeOneServiceCall(UcmRequest.java:397)
at oracle.imaging.repository.ucm.UcmRequest.makeServiceCall(UcmRequest.java:219)
at oracle.imaging.repository.ucm.UcmAgentUserManager.getAgents(UcmAgentUserManager.java:65)
... 41 more
Can anyone please let me know the solution for the this repository error issue.
I bounsed the IPM server, but it didnt resolve the problem.
Thanks in advance
Chandru

This seems to be an error due to mapping from IPM. It can be more clear if the text file and screen shot of work flow mapping is uploaded.
Regards,
Vikrant Korde

SMTP error issues

Similar Messages

Maybe you are looking for