SMTP Mail configuration in WDS server
Hi,
My company has more than 9000 desktops in which normally on day basis more than 100-150 systems will go deployment via WDS (MDT 2013) in server 2008r2 (DHCP is also configured in the same server), Where as i need to configure a SMTP mail server which will
export the lease expiration(currently reduced from 24hrs to 8hrs of lease period) data with hostnames & IP details and send it to my mail id.
I am very least experienced in this domain, Kindly suggest the ideas to implement the same.
Why required ?
To monitor the number the images being deployed on a given day.
No systems should reflect more than 1 day in the imaging vlan.
Manual efforts and incidents can be reduced if implemented.
Thanks,
Satheeshkumar C
Hi Satheeshkumar C,
As far as I know there don’t have the original option can achieve your propose, when the DHCP lease expiration, may you can choose third party application, and this forum is
mainly for WDS related issue it’s not the best place to talk about the MDT issue, there have a specific MDT support forum you can post in MDT support forum and get the MDT expert further support.
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
SMTP E-mail
https://technet.microsoft.com/en-us/library/hh831469.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
Can we provide UN and pwd Authentication 4r SMTP Mail Configuration
Dear All,
Previously we are able to send the mails from SAP to Outside World. After chaning the Mail Server to MS Exchange 2003
We enabled the Port the 25.
We are facing a problem While configuring a mail via SMTP for Exchange Server 2003.
Throws an Error Message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 > : Recipient add
As per network Team :
Unless we provide a Username and password, the Send/Receive process does not happen.
Is there any option in SAP - SMTP Mail Configuration to Provide user and password Authentication.
I searched in SDN as well as in market place. but i could not succeed. Please guide me the process.
Regards
SNB.Hi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan -
Dear Folks,
after SMTP mail Configuration
i can send mails to Internal mail id
but i got dump to send External mail id
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 : Relay access d
pls give me suggestion to resolve this issue
regards
satheeshHi ,
Please check the below note it will solve your issue::
Note 693306 - Error analysis for e-mails and fax sent via Service Manager.
Also as it says permision denied that means you have to check with your network team to check for proper access to cross firwall.
Thanks..
Mohit
Edited by: mohit gupta on Oct 1, 2009 8:53 AM -
Error in workflow mailer configuration - Inbound Email Server
Hi
I have Windows 2000 SP4.
I have installed Oracle Workflow 2.6.3 Standalone as below
I have installed Oracle Database 10gR1 and Oracle Workflow Server 2.6.3 in same oracle home.
I have installed Apache HTTP Server 9.0.4 and Workflow Middle Tier in the same oracle home.
I have finished installation and configuration successfully.
Now I want to configure mailer parameters.
I have started Workflow Component Container and Workflow Management Container.
When I try to enter paramters for mailer I get error in Inbound EMail Account Server Name.
The error says: Unable to make a network connection.
I do not want to configure Inbound Mail Server but I need to enter these parameters as they are mandatory.
I set Inbound Thread Count = 0 so that configuration does not consider parameters for IMAP server.
My mail server is SMTP server.
Any idea how to overcome this error and continue with notification mailer configuration?
ThanksYou would need to modify all the parameters listed in this script. This script updates each of the mailer and agent listener parameter. You may edit the script to remove all API calls OTHER THAN those for "Workflow Notification Mailer".
Then update ALL the parameters for "Workflow Notification Mailer" with appropriate values with Inbound Thread Count to 0 and Outbound Thread Count to 1. Inbound Server Name, Account, Inbox, Discard and Processed values can be ignored. Make sure Outbound Server Name is valid SMTP Server name.
Values like From, HTML Agent should point appropriately as per your env.
Hope this helps
Vijay -
I'm trying to configure my exchange server to work with SugarCRM. SugarCRM is asking for smtp mail server information. and, I know my mail server address, but I'm not sure how to configure my exchange server or check to make sure the appropriate
configurations are set up for this to occur.Hi ,
Please try to telnet the exchange server ip from the sugarCRM application . If it happens successfully just try to send an test email to anyone of the exchange recipient in our oraganization from the sugarCRM application via telnet command .
Note : You should have to send an email to internal recipient otherwise exchange will not allow .Because basically exchange server will have receive connector closed for open relay .If you wanted to send email to the external recipient like gmail or yahoo
you need to create a new receive connector and you have to open an relay for an particular ip address of sugarCRM application .
Sometimes application servers will have two network adapters .So on that scenario please check the respective ip address added on the exchange server receive connector is an primary ip address for sugarCRM application server .
For open relay please refer the below articles .
http://blogs.technet.com/b/exchange/archive/2006/12/28/3397620.aspx
please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
SMTP Mail Configuration-Need Help
Hi Experts,
We have ECC 6.04 on Linux Redhat. we need to enable mail communication from SAP however our mail server is in different network/domain. is it enough to open the ports for mail communication?
kindly clarify.
Regards,
PradeepThanks RB,
so I need to do the following,
1. Need to open ports for mail communication between two servers.
2.Need to SAP IP addresses in relay server
Other than these anything needs to be done?
Thanks a lot,
Pradeep -
Mail configuration in SAP SOLUTION MANAGER 7.1
Hi All,
I am working on SMTP (Mail)Configuration in SAP Solution Manager 7.1. And our mail host is GOOGLE APPS.
Does any one had configured mail in SAP for hosted on GOOGLE APPS?
Does SAP will support this as it is external (mail) server?
I read note 455140, related notes and configured accordingly.
Steps I followed:
1. parameters maintained:
icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180
is/SMTP/virt_host_0 = *:25000;
2. User maintained: Dialog user with S_A.SCON profile with user address as username@<companyname>.com
3.Client Assignment: (SICF): a. Host Data:Profile Parameter Number: is/SMTP/virt_host_0
b. Service data: Client 100, user: username, password: ***, language: EN.
c. Handler List: CL_SMTP_EXT_SAPCONNECT in the first position
Saved Changes n Activated.
4.SAPconnect administration (SCOT):
a. Default domain: <companyname>.com
b. Nodes: SMTP Under node:
Mail Host: smtp.gmail.com
Mail Port: 25 and also tried 587
In Internet Address Area: *
5.Scheduled periodic Job with SAP&CONNECTALL variant
6. telnet <HOSTNAME> 25000 is successful
In both cases I am getting error as:
No delivery to ishan.sangai@<companyname>.com, authentication required
Message no. XS853
Diagnosis
The message was processed successfully in the SAP system. The mail server that is supposed to receive the message for further processing requires authentication. The SAP system does not support this procedure. As a result, the message was not delivered to recipient ishan.sangai@<companyname>.com.
Information from External System
_530 5.7.0 Must issue a STARTTLS command first. p1admin@<companyname>.com
Procedure
The administration settings must be changed. The specified mail server must not request authentication.
7. I tried to telnet smtp.gmail.com 25 and 587 also
I am getting following output:
220 mx.google.com ESMTP ds5sm2193379ibb.5
HELO <HOSTNAME>
250 mx.google.com at your service
HELO <companyname>.com
250 mx.google.com at your service
MAIL FROM solman_admin@<companyname>.com ENVID=12345
530 5.7.0 Must issue a STARTTLS command first. ds5sm2193379ibb.5
Does we need to talk with Google Apps provider for any modifications to be made for this.
if yes, which changes should I request them?
Please help me to solve this problem.
Please provide links,guides.notes etc. for this scenario
Thanks & Regards,
IshanHi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan -
How many ways we can configure SMTP Mail server on windows to get CCP mails
Hello IAC's,
I have configured SMTP server and teleneted in CCP server and also I'm receving mails too when I submit the orders.
I wondered with an update given by my friend that he is using pmail server for SMTP mails.
Can any one suggest me in how many ways we can enable the SMTP server.. on windows..??
Thanks,
Noor.Hi
if i use String provider = "imap"; then it shows the following error message..
javax.mail.MessagingException: Connection refused: connect
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:479)
at javax.mail.Service.connect(Service.java:275)
at javax.mail.Service.connect(Service.java:156)
at javamail.AllPartsClient.main(AllPartsClient.java:39)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
at com.sun.mail.iap.Protocol.<init>(Protocol.java:84)
at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:87)
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:446)
... 3 more
pls any one give idea -
How can i setup my E-Mail Configuration which can map to Gmail SMTP in Oats
Hi Team,
I would like to send the reports which i test to some gmail Id's using OATS E-mail Configuration,
Can you please let me know what are the fields needs to entered
SMTP Servers :
When i Searched it says the following are the SMPT server
smtp.gmail.com
SSL Port 465
StartTLS Port 587
Please let me know which one to enter in the "SMTP Server" text box
Return Address : Which address do we need to enter in this field
Thanks and Waiting for your reply,
Anand.I'm facing the same problem, who can help us ? what to enter into fields?
-
I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here -
Configuring Outbound and Inbound SMTP mails with SUN Java messaging system
hi all,
i am new to Solaris i have deployed SUN java comuunication Suite. How do i configure my messaging server to send outgoing mails through existing gateway and recieve inbound mails from the same gateway?
Currently my server is connected to the internet directly i am able to send a mail to an external domain for example gmail. Can anyone help me out in understanding the default functioning of external mail routing and how do i point to a gateway?
Thanks,
ZafrulHi,
zkhan wrote:
i am new to Solaris i have deployed SUN java comuunication Suite. Welcome. Some good resources you should look at are the following:
http://www.sun.com/bigadmin/hubs/comms/overview/index.jsp
http://msg.wikidoc.info/
http://blogs.sun.com/factotum/
How do i configure my messaging server to send outgoing mails through existing gateway and recieve inbound mails from the same gateway?There is two steps to this.
To configure outgoing emails to be relayed through a gateway, you need to modify the <msg_base>/config/imta.cnf MTA configuration file and add "deamon <gateway hostname>" to your tcp_local channel configuration e.g.
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0
loopcheck daemon mygateway.com
tcp-daemonTo allow the gateway system to send emails to your host unconditionally, modify the <msg_base>/config/mappings MTA configuration fail and add the gateway's IP address to the INTERNAL_IP mapping table e.g. (where the gateway has an IP of 1.2.3.4 and your system has an IP of 192.168.1.20)
INTERNAL_IP
$(192.168.1.20/24) $Y
$(1.2.3.4/32) $Y
127.0.0.1 $Y
* $NOnce you have done this you will need to rebuild the MTA configuration cache and restart the MTA processes.
<msg_base>/sbin/imsimta cnbuild
<msg_base>/sbin/imsimta restart
Currently my server is connected to the internet directly i am able to send a mail to an external domain for example gmail. Can anyone help me out in understanding the default functioning of external mail routing and how do i point to a gateway?For the understanding, you will need to read-up the manuals. Messaging server is a flexible and powerful product for sending/processing emails, but with that flexibility comes complexity. I suggest you start by reading the Messaging Server Administration Guide:
http://docs.sun.com/app/docs/doc/819-4428
Regards,
Shane. -
Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support -
Mail: Proper way to adjust IMAP/SMTP mail server entries?
Please forgive, but I am still on 10.4 (Tiger) with an iCloud mail account. I believe this is still a widely applicable and helpful question!
IMAP (Incoming Mail Server):
MINE IS STILL: mail.me.com (Currently still working fine)
Advised/required: imap.mail.me.com
SMTP (Outgoing mail server):
MINE IS STILL: smtp.me.com (Currently still working fine)
Advised/required: smtp.mail.me.com
QUESTION 1: To have the server entries set properly, can I simply make textual changes in the Incoming/Outgoing server name fields for my IMAP iCloud mail account (via insert of word "mail" in server names; change is not shown here)...
...or should one DELETE IMAP ACCOUNT (as I have commonly read!) and recreate with all new correct settings? If it is advisable to Delete the account, why wouldn't just making the quick server name adjustments be sufficient?
Also, I need some fears assuaged:
- "Deleting an IMAP mail account" in Mail has no risk/danger of losing/deleting all of your Sent and Received Inbox/Sentbox contents, correct? When you recreate an Account, all of your mail held on server is still fully safe and accessible, yes?
ISSUE TWO:
I like to use both my "me.com" and "mac.com" email addresses.
Under "Edit (Outgoing) Server List," I still have a secondary older entry "smtp.mac.com" listed.
QUESTION 2: Is the following statement of my understanding accurate?
"Deletion of the smtp.mac.com outgoing server is completely acceptable and would not prohibit sending of email under mac.com email address because the "mac.com" email address is an alias for the me.com address and ALL mail (whether sent with mac.com or me.com email address) goes out through the ME.COM server."
Is that correct. If not, kindly advise!
I really appreciate the help.
I am not a beginning Mac user and find that the complete configuration intricacies of Apple Mail (I know that's the old name) are one thing that users are never really guided to master and comprehend.
Many thanks in advance!
Bill from MarylandThese are the settings recomended by Apple.
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. -
Adding an SMTP mail server to an existing Weblogic server on Windows 7
Hi,
I need to send e-mail from pl/sql, using UTL_MAIL, but my google searches don't find how to add an SMTP mail server to my pc.
I have found that Microsoft offers IIS but I think the SMTP server could be part of Weblogic?
Please redirect me to the proper Oracle Mail forum if it exists.
Many thanks for your help.Sure, all you need to do is install the server with the mailbox role (and other roles, if you want), configure whatever mailbox databases you want on it (and configure the other roles you have added), then put mailboxes on it.
Some advice - do not use the GUI for the installation because it will install default mailbox and public folder databases. If you use the setup.com (the text-based installation), you can control databases. We had to rebuild a server once and
the engineer assisting us had us use the GUI and we ended up with a public folder database, which we had to remove (since we have no public folders in our organization).
Once you have the new server installed, you can either create new mailboxes on it, or you can move existing mailboxes from your other databases to it. With the Exchange 2010 move mailbox commands, this is a very simple process.
BTW, when you get around to removing your P2V'ed system(s), make sure you handle any CAS virtual servers (OWA, ECP, OAB) and ensure they are hosted on a server that will remain. You could end up painting yourself into a corner if you don't. -
Dpm 2012 email notification using a non-exchange smtp mail server
Has anyone successfully been able to configure DPM 2012 to send email notifications to a standard SMTP mail server (NON-EXCHANGE)?
Hi Happy,
I try with IIS6 SMTP server with Anonymous Access.
From DPM side, settings for "Authentificated SMTP Server: Username/password" :
1- Leave blank =>ID 2013 : logon failure : unknow user name or bad password.
2- DPMServerName\UserAccount => Works :)
Network trace with Wireshark :
1- Nothing => Most likely blocked by DPM console : Authentificated SMTP Server must be fill.
2- See full SMTP connection, mail send.
Could you do network trace to see what's happen ?
Stephane
Please remember to click “Mark as Answer” on the post that helps you. This posting is provided "AS IS" with no warranties. knowledge is valid only if it is shared by All.
My DPM blog Yet Another DPM Blog
Maybe you are looking for
-
I recently purchased an iMac (October 2013) and my computer knowledge is very limited. The computer has two user areas, one for my wife and one for me. Our iTunes account and photos are in my user area. My wife wants to access our photos and music fr
-
Looking for a better resource to get a handle on using effects in after effects (CS6 BTW)
Hello thanks for looking in, I would like to get better control over Zooming. The Zooming I found in AE did not function when dragged it into my effects controller...Is the only Zoom control really the "Scale" as found in Prem-Pro? I could not find i
-
Non-unicode printing unreadable character for Thai
Hello All, Our current system 4.7 running on Oracle datavase on Window NT server, codepage set to 8600 with supported TH and EN. Previously, user logon as 'blank' and set character (at user setting) to 'TH', the printing of SAP documents to printer i
-
My ipod nano 4th gen. scroll doesn't work at all. how do i fix it? do i have to send it in? and how much would it cost?
-
Is Tracker included with Arch?
Hi all, just been playing with the beta version of Ubuntu 8 and I was wondering if tracker is included with Arch? I have tried to install it via pacman and it says it is installed, but I cannot see it under System > Preferences and none of the comman