SMTP Mail Gateway

Hi
I need information about SMTP mail gateway. Is that the other product we need to buy or do we have this in Oracle.
Is there anyone who can guide me how I can install and configure SMTP gateway for our OEM and TOAD.
Please give as much as information you can give about SMTP mail server.
Thanks

I posted in the proper group.
novell.support.groupwise.8x.gwia

Similar Messages

SAP Internet Mail Gateway for MS Exchange 2003 Server

Hi,
Has anybody successfully configured the IMG to work with MS Exchange 2003?
We have our 4.6C currently configured to talk to Exchange 2000 through SXC
Note 594428 - SXC: Exchange 2003 Server is not supported
Solution
R/3 Basis Release 3.1I to 4.6D:
Use IMG 4.6D and sendmail instead of the SXC (see note 101573), or
Upgrade your SAP system to Web Application Server (WAS) 6.10 or later and then use the SMTP plugin.
We only use outbound mail from SAP and this is sent to intranet users only, we are not planning on upgrading for a at least a year and would like to avoid installing another mail server.
Note 363154 - Internet mail gateway: use other MTA than Sendmail
This note suggests that any MTA (Mail Transfer Agent) can be used so long as it can be called from the command line, Exchange is an MTA, anybody now how to do a command line call for Exchange?
I have read the documentation
http://help.sap.com/saphelp_46c/helpdata/en/0c/39c93589c5ab53e10000009b38f839/frameset.htm
Jasper

hi,
we are in the process of configuring the Internet Mail Gateway on R/3 4.6c on Unix platform.
I have created the RFC Destinations in SM59 and also checked the Test Connection and its working fine. I then did the Unix configuration and went on to the check whether the configuration was successful in SO01 by sending a sample text message to my company's mail address. but i did not recieve any mails on my Microsoft Outlook, instead the count under the errors column increased by one.
on checking the status for the sent message in SO01, its saying "No Delivery to [email protected](for reason, see long text)... but there's no long text either...
Can anyone please let me know the reasons for it and it would also be really helpful if someone can let me know whether i have missed any configuration settings.
Also, can someone send the list of parameters that are to be entered for the Unix configuration under mlsomadm mailgw.ini, so that i can verify whether i have entered the parameters correctly....
Kindly revert back at the earliest...
Thanks & Regards
Manicks

SAP to OUTLOOK MAIL - GATEWAY Problems...

Hi Gurus;
I want to send email , sap to outlook. We use sap on the windows os. I created RFC with SM59 and created SAPConnect note with SCOT.
But I dont know create gateway process. Please help me.
My ref. shortcut : /people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
Thanks for everything.
Best regards.

Hi Melih,
The problem here is that you are trying to use the internet mail gateway and Sendmail to relay mails on a Windows OS (usually to Exchange).
The main problem is that Sendmail is not a native Windows program. So the Blog that you were following was not correct for Windows OS.
Sendmail is a native Unix program and as such is called with switches. The IMG was designed to communicate with Sendmail with the follow command to correctly parse the mail (sendmail -i -f<SENDER_ADDRESS>) to Sendmail.
So you have to follow the blog below and use another command line mailer to correctly communicate with Exchange or any other SMTP mail server.
Please refer to the following blog to enable emails to be sent from SAP connect:-
[Email from SAP - 4.6* using MS Exchange|http://it.toolbox.com/wiki/index.php/Email_from_SAP_-_4.6C_using_MS_Exchange_2003]
And your problem will be resolved

Cannot send email through yahoo on iPad 4, apple.smtp.mail.yahoo not available as of December 1, 2012

I am unable to send emails through yahoo on my ipad 4 wifi, just starting over the weekend. My 3 other non-yahoo email accounts are working fine on my ipad. When I try to send an email from the yahoo account, I receive the message that the connection to the outgoing mail server "apple.smtp.mail.yahoo" failed. I can send email through yahoo just fine on the web and on my computer through Thunderbird.

Yahoo's been having persistently random issues for months. You can try just waiting it out, or delete and readd your yahoo account. When my accounts were affected I just used webmail to access my yahoo accounts until it cleared up.
Chances are it's all on their end and really all you can do is wait it out.

Mail 4.1 incorrect "sending from" settings, won't send SMTP mail

I've noted quite a few others reporting 10.6.1 SMTP mail problems, but I haven't seen my specific issue noted elsewhere.
I've been able to send using my IMAP AOL address via Mail and longtime SMTP settings until today. Now, Mail apparently is scrambling outgoing email addresses and mismatching them with the outgoing SMTP settings. For instance:
Using AOL address example [email protected] (showing correctly in the "From" window), the email will not send. The "cannot sent message using the server 'LG'..." dialogue comes up with the options to edit the SMTP server list or use the Connection Doctor. (All Connection Doctor reports coming back green, so the trouble's not there.)
Looking a little closer at the dialogue box, though, it says Mail thinks the outgoing message is being sent from an entirely separate email address. In a couple of tests, the incorrect "sending from" address changes - one time it was a different AOL account, the next was an entirely separate .edu account. Wish I could attach a screenshot, but the bottomline is: I can see the "From" field showing the [email protected] address, but the error message about reconciling the outgoing server settings shows "Sending from: My Name <[email protected]>"
Whatever the issue is, it is apparently not affecting (so far) my IMAP personal domain or IMAP gmail accounts - they're both sending and receiving normally.
So Mail apparently is trying to send AOL account mail, but it's not finding the correct SMTP connection because somewhere along the way it's shifted the "sending from" to a different account.
Any thoughts?

I've been using Mail app with AOL accounts and the current settings for years with no trouble. This is new.
I still think it's a Mail app issue - it's clearly showing in the error message a different "Sending from" account from the one that's actually selected and showing in the "From" window of the email message. It's as though Mail is trying to apply the existing SMTP settings for an erroneous account to the outgoing message. It's either trying to send [email protected] mail with YY.aol.com SMTP settings or vice versa.
I'd be open to re-creating the AOL IMPAP accounts if I could avoid losing years worth of sent and received messages. I have everything backed up with Time Machine, but I've had very erratic email recovery issues with it since Snow Leopard too.

How to attach files in the SMTP mail?

Hi All
Anyone know how to how to attach files into the mail configured
with SMTP while changing the workstatus. The SMTP mail is working
fine, but my requirement is to attach a file which is having static information
like instructions for users or something like that.
Please help me on this..
My Version of BPC is MS 7.X
Regards,
Baijuchandran.B

Have you seen this thread? Not an elegant solution, but it appears to work for some bizarre reason.
https://community.bt.com/t5/Email/Email-won-t-accept-attachments-error-18-temporary-It-isn-t/td-p/14...

Smtp mail for Grid connection timed out

Moving from simple dbconsole to full EM Grid Control. Mail was configured and working previously for dbconsole (and continues to). However, when in EM Grid Control I am getting the error:
Could not connect to SMTP host: smtp.xxxxxxx.com, port: 25; nested exception is: java.net.ConnectException: Connection timed out"
E-mail can be sent from the dbsonole version. Walking through the steps for testing smtp mail through telnet etc, all result in success. There is no AUTH required.
I shut down the dbconsole agent on the server, but still get the timeout error. What could be causing the timeout. It isn't a 'connection refused' error.

OK so you have a database installed on server A.
DBconsole is also installed on server A.
You can telnet to smtp.xxxxx.com on port 25 from server A.
You have installed GC.
You should now have a GC agent installed on server A.
What type of GC installation did you do?
Where is the GC Database?
Where is the GC OMS?
Can you telnet to smtp.xxxxx.com on port 25 from the GC database server?
Can you telnet to smtp.xxxxx.com on port 25 from the GC OMS server?

Can we provide UN and pwd Authentication 4r SMTP Mail Configuration

Dear All,
Previously we are able to send the mails from SAP to Outside World. After chaning the Mail Server to MS Exchange 2003
We enabled the Port the 25.
We are facing a problem While configuring a mail via SMTP for Exchange Server 2003.
Throws an Error Message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 > : Recipient add
As per network Team :
Unless we provide a Username and password, the Send/Receive process does not happen.
Is there any option in SAP - SMTP Mail Configuration to Provide user and password Authentication.
I searched in SDN as well as in market place. but i could not succeed. Please guide me the process.
Regards
SNB.

Hi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan

How to identify the name of my smtp-mail host dynamically?

Hi,
I want to send an email from my system which has an internet connection.
I don't know how to identify and mention the name of my smtp server ie; the smtp-host name that should be mentioned in my propetries object 'props' as props("mail.smtp.host","smtphostname");
I want this program to work on other systems also,ie; It should dynamically find out what is the smtp-email host for the computer on which the program is running and set the smtp-host name in the 'properties' object dynamically.
I will be thankful if anybody sends me code to solve this problem.
Thank u in advance,
Ravi.

Write a mail scan to look for typical settings
such as domain, mail.domain, smtp.domain, smtp.mail.domain
where domain is after @ in an email address
Have a SocketSearch class that uses non blocking via java.nio.channels.*
so it can be interruptable and scan for these typical mail settings on default port 25 - The code using these interruptable socket can each be threaded to find the host/port and should find it in seconds
Once found, store the settings in a configuration so you don't have to scan again unless it doesn't work anymore...
If can't find the socket host/port via typical settings, next use a Java class that does a nslookup based on MX records - For example if you type "nslookup -type=mx javasoft.com" and you get mail exchanger = mail.java.sun.com and if you "telnet mail.java.sun.com 25" - you can see the port is open for sending emails.
No expert in MX records for a domain to find the exact one and someone else can share some light on this...

SMTP Mail Adapter settings

Hi Experts,
I have small doubt regarding SMTP Mail Adapter settings.
Right now i am sending files in attachment to the Users through SMTP.
But now User needs in MIME type for which i can see settings in Security Parameter.
I can see is S/MIME, when i flag that i can see Duration like Days, hours, minutes, seconds.
Could you please tell me what is the significance of it.
Appreciate for your suggestions
Regards,
Bhasker

Hi,
>>>What does Duration means is that if i give duration that security archiving works for that duration
nothing for now - this functionality does not work so it makes no difference what does it mean
Regards,
Michal Krawczyk

SMTP - mail service

Hi,
i configured the SMTP for mail service.
I can able to send mail to our domain ( for ex: abc.com ) - default domain
i gave SMTP Connection as : mail.abc.com
the above scenario --- will work for me if i send mail to our default domain. but i am not able to send to yahoo, gmail.
Please help me ...
--- Lee

Hi Lee,
In the SCOT, SMTP node you need to have the SMTP server address. if you've given the sap server IP address, then revert it back.
What Juan has already mentioned,
"you need to make sure that the IP address of the SAP System is populated on the SMTP relay agent for the mails to leave the domain." that means you've to tell your SMTP mail admin guys to add the SAP server IP address in the relay agent.
Regards,
Debasis.

Mail: Proper way to adjust IMAP/SMTP mail server entries?

Please forgive, but I am still on 10.4 (Tiger) with an iCloud mail account. I believe this is still a widely applicable and helpful question!
IMAP (Incoming Mail Server):
     MINE IS STILL:      mail.me.com (Currently still working fine)
     Advised/required:     imap.mail.me.com
SMTP (Outgoing mail server):
     MINE IS STILL:          smtp.me.com (Currently still working fine)
     Advised/required:      smtp.mail.me.com
QUESTION 1: To have the server entries set properly, can I simply make textual changes in the Incoming/Outgoing server name fields for my IMAP iCloud mail account (via insert of word "mail" in server names; change is not shown here)...
...or should one DELETE IMAP ACCOUNT (as I have commonly read!) and recreate with all new correct settings? If it is advisable to Delete the account, why wouldn't just making the quick server name adjustments be sufficient?
Also, I need some fears assuaged:
- "Deleting an IMAP mail account" in Mail has no risk/danger of losing/deleting all of your Sent and Received Inbox/Sentbox contents, correct? When you recreate an Account, all of your mail held on server is still fully safe and accessible, yes?
ISSUE TWO:
I like to use both my "me.com" and "mac.com" email addresses.
Under "Edit (Outgoing) Server List," I still have a secondary older entry "smtp.mac.com" listed.
QUESTION 2: Is the following statement of my understanding accurate?
"Deletion of the smtp.mac.com outgoing server is completely acceptable and would not prohibit sending of email under mac.com email address because the "mac.com" email address is an alias for the me.com address and ALL mail (whether sent with mac.com or me.com email address) goes out through the ME.COM server."
Is that correct. If not, kindly advise!
I really appreciate the help.
I am not a beginning Mac user and find that the complete configuration intricacies of Apple Mail (I know that's the old name) are one thing that users are never really guided to master and comprehend.
Many thanks in advance!
Bill from Maryland

These are the settings recomended by Apple.
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead.

SMTP Mail configuration in WDS server

Hi,
My company has more than 9000 desktops in which normally on day basis more than 100-150 systems will go deployment via WDS (MDT 2013) in server 2008r2 (DHCP is also configured in the same server), Where as i need to configure a SMTP mail server which will
export the lease expiration(currently reduced from 24hrs to 8hrs of lease period) data with hostnames & IP details and send it to my mail id.
I am very least experienced in this domain, Kindly suggest the ideas to implement the same.
Why required ?
To monitor the number the images being deployed on a given day.
No systems should reflect more than 1 day in the imaging vlan.
Manual efforts and incidents can be reduced if implemented.
Thanks,
Satheeshkumar C

Hi Satheeshkumar C,
As far as I know there don’t have the original option can achieve your propose, when the DHCP lease expiration, may you can choose third party application, and this forum is
mainly for WDS related issue it’s not the best place to talk about the MDT issue, there have a specific MDT support forum you can post in MDT support forum and get the MDT expert further support.
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
SMTP E-mail
https://technet.microsoft.com/en-us/library/hh831469.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Adding an SMTP mail server to an existing Weblogic server on Windows 7

Hi,
I need to send e-mail from pl/sql, using UTL_MAIL, but my google searches don't find how to add an SMTP mail server to my pc.
I have found that Microsoft offers IIS but I think the SMTP server could be part of Weblogic?
Please redirect me to the proper Oracle Mail forum if it exists.
Many thanks for your help.

Sure, all you need to do is install the server with the mailbox role (and other roles, if you want), configure whatever mailbox databases you want on it (and configure the other roles you have added), then put mailboxes on it.
Some advice - do not use the GUI for the installation because it will install default mailbox and public folder databases. If you use the setup.com (the text-based installation), you can control databases. We had to rebuild a server once and
the engineer assisting us had us use the GUI and we ended up with a public folder database, which we had to remove (since we have no public folders in our organization).
Once you have the new server installed, you can either create new mailboxes on it, or you can move existing mailboxes from your other databases to it. With the Exchange 2010 move mailbox commands, this is a very simple process.
BTW, when you get around to removing your P2V'ed system(s), make sure you handle any CAS virtual servers (OWA, ECP, OAB) and ensure they are hosted on a server that will remain. You could end up painting yourself into a corner if you don't.

SMTP Mail Feed

Hi there,
Ok I have a little problem that I'm hoping somenone would kindly help with!
• We currently have a Xserve 2009 running our company emails on
• We use Easily for our domain name registration
• We use EASYNET for our website hosting AND SMTP mail feed
Basically we want to cancel our hosting and SMTP feed with EASYNET and go to anothr host but they don't supply SMTP mail feeds.
Does anyone know what I can do in order to get a new host for our SMTP emails?
Is there anything we can do on the Xserve that will help us or does anyone know of a company that offers JUST an option of having an SMTP feed?
Any help would be amazing of you.
Kind regards,
Mark

Hi Mark,
I take it you are in the UK? send me an email and i'll try and point you in the right direction. You have a lot of options on how you can do this.
All the best
Beatle

SMTP Mail Gateway

Similar Messages

Maybe you are looking for