SMTP mail restriction

Hi all,
Can anyone advice me on the below?
1. In sost, there is showing mail sending log.
So is there any mail log in the server or tablespace? If yes, where is it (path of the log and tablespace name?)
2.how to restrict attachedment and mail size
3. is there any setting for retries of sending?
Thanks in advance

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated  permit_mynetworks  check_helo_access hash:/etc/postfix/helo_access  reject_non_fqdn_hostname  reject_invalid_hostname  permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions.  You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up.  Private/policy I think relates to grey listing.  Maybe gives you a hint.

Similar Messages

  • BLS Send Mail Action Block Requires SMTP Mail Server Mail Account

    My SMTP Mail Server does NOT require authentication.  It appears as if MII Ver 12 requires a mail account to be filled in on the BLS Send Mail Action Block.  If the mail account field is left empty the transaction fails (error - mail account cannot be blank).  Transaction works without the mail account on Ver 11.5 but Ver 12 requires the field to filled in.  Please advise whether this is a new requirement in Ver 12 or a bug that needs to be addressed.

    Hi Sam,
    What I think is, it requires one mail account to send the mail and one to receive it.
    There is no restriction on receiver that can be anyone. But the sender needs to be known that some mail has been sent from his mail account. So may be because of this the added authentification is required. It will use that mail account to send the mails.

  • GWIA SMTP relay restriction doesn't work

    I am running GWIA on SLES 10 SP2 GW703HP4.
    I have the GWIA SMTP Relay Defaults=Prevent message relaying. Exceptions with allow from 192.168.10.3 to * as the 192.168.10.3 is the alert mail server. When I tried to test the SMTP port to GWIA, I got restrict relay error. If I change Relay Default to "Allow message relaying", that is the only time that I can connect from 192.168.10.3 to send SMTP mail via GWIA.
    I have tried to restarted GWIA everytime I make the change but can't get the exception to work?
    Any suggestion?
    Cheer
    Andy

    I deleted the IP address and added the same entry back, then GWIA relay fine.
    Might be I have bad eyes?? Thanks all for the inputs.
    Andy
    Originally Posted by buckesfeld
    * andyj2009 wrote, On 05/20/2010 11:06 PM:
    > Exceptions with allow from 192.168.10.3 to * as the 192.168.10.3 is the
    > alert mail server.
    Note there are two situations where you don't have to tinker with relaying exceptions at all:
    - the alert mail server sends to internal addresses only
    - the alert mail server can do SMTP authentication.
    Uwe
    Novell Knowledge Partner (NKP)
    Please don't send me support related e-mail unless I ask you to do so.

  • Cannot send email through yahoo on iPad 4, apple.smtp.mail.yahoo not available as of December 1, 2012

    I am unable to send emails through yahoo on my ipad 4 wifi, just starting over the weekend. My 3 other non-yahoo email accounts are working fine on my ipad. When I try to send an email from the yahoo account, I receive the message that the connection to the outgoing mail server "apple.smtp.mail.yahoo" failed. I can send email through yahoo just fine on the web and on my computer through Thunderbird.

    Yahoo's been having persistently random issues for months. You can try just waiting it out, or delete and readd your yahoo account. When my accounts were affected I just used webmail to access my yahoo accounts until it cleared up.
    Chances are it's all on their end and really all you can do is wait it out.

  • Mail 4.1 incorrect "sending from" settings, won't send SMTP mail

    I've noted quite a few others reporting 10.6.1 SMTP mail problems, but I haven't seen my specific issue noted elsewhere.
    I've been able to send using my IMAP AOL address via Mail and longtime SMTP settings until today. Now, Mail apparently is scrambling outgoing email addresses and mismatching them with the outgoing SMTP settings. For instance:
    Using AOL address example [email protected] (showing correctly in the "From" window), the email will not send. The "cannot sent message using the server 'LG'..." dialogue comes up with the options to edit the SMTP server list or use the Connection Doctor. (All Connection Doctor reports coming back green, so the trouble's not there.)
    Looking a little closer at the dialogue box, though, it says Mail thinks the outgoing message is being sent from an entirely separate email address. In a couple of tests, the incorrect "sending from" address changes - one time it was a different AOL account, the next was an entirely separate .edu account. Wish I could attach a screenshot, but the bottomline is: I can see the "From" field showing the [email protected] address, but the error message about reconciling the outgoing server settings shows "Sending from: My Name <[email protected]>"
    Whatever the issue is, it is apparently not affecting (so far) my IMAP personal domain or IMAP gmail accounts - they're both sending and receiving normally.
    So Mail apparently is trying to send AOL account mail, but it's not finding the correct SMTP connection because somewhere along the way it's shifted the "sending from" to a different account.
    Any thoughts?

    I've been using Mail app with AOL accounts and the current settings for years with no trouble. This is new.
    I still think it's a Mail app issue - it's clearly showing in the error message a different "Sending from" account from the one that's actually selected and showing in the "From" window of the email message. It's as though Mail is trying to apply the existing SMTP settings for an erroneous account to the outgoing message. It's either trying to send [email protected] mail with YY.aol.com SMTP settings or vice versa.
    I'd be open to re-creating the AOL IMPAP accounts if I could avoid losing years worth of sent and received messages. I have everything backed up with Time Machine, but I've had very erratic email recovery issues with it since Snow Leopard too.

  • How to attach files in the SMTP mail?

    Hi All
    Anyone know how to how to attach files into the mail configured
    with SMTP while changing the workstatus. The SMTP mail is working
    fine, but my requirement is to attach a file which is having static information
    like instructions for users or something like that.
    Please help me on this..
    My Version of BPC is MS 7.X
    Regards,
    Baijuchandran.B

    Have you seen this thread? Not an elegant solution, but it appears to work for some bizarre reason.
    https://community.bt.com/t5/Email/Email-won-t-accept-attachments-error-18-temporary-It-isn-t/td-p/14...

  • Smtp mail for Grid connection timed out

    Moving from simple dbconsole to full EM Grid Control. Mail was configured and working previously for dbconsole (and continues to). However, when in EM Grid Control I am getting the error:
    Could not connect to SMTP host: smtp.xxxxxxx.com, port: 25; nested exception is: java.net.ConnectException: Connection timed out"
    E-mail can be sent from the dbsonole version. Walking through the steps for testing smtp mail through telnet etc, all result in success. There is no AUTH required.
    I shut down the dbconsole agent on the server, but still get the timeout error. What could be causing the timeout. It isn't a 'connection refused' error.

    OK so you have a database installed on server A.
    DBconsole is also installed on server A.
    You can telnet to smtp.xxxxx.com on port 25 from server A.
    You have installed GC.
    You should now have a GC agent installed on server A.
    What type of GC installation did you do?
    Where is the GC Database?
    Where is the GC OMS?
    Can you telnet to smtp.xxxxx.com on port 25 from the GC database server?
    Can you telnet to smtp.xxxxx.com on port 25 from the GC OMS server?

  • Can we provide UN and pwd Authentication 4r SMTP Mail Configuration

    Dear All,
    Previously we are able to send the mails from SAP to Outside World. After chaning the Mail Server to MS Exchange 2003
    We enabled the Port the 25.
    We are facing a problem While configuring a mail via SMTP for Exchange Server 2003.
    Throws an Error Message:
    Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 > : Recipient add
    As per network Team :
    Unless we provide a Username and password, the Send/Receive process does not happen.
    Is there any option in SAP - SMTP Mail Configuration to Provide user and password Authentication.
    I searched in SDN as well as in market place. but i could not succeed. Please guide me the process.
    Regards
    SNB.

    Hi we are configuring Google SMTP getting below error..
    No delivery to xxx.com, authentication required
    Message no. XS856
    Diagnosis
    The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
    Information from external system (if available)
    smtp.gmail.com:587
    530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
    Procedure
    Enter the logon data in the SAPconnect node.
    Using Gmail SMTP server using "smtp.gmail.com" with port 587
    Please advise.
    Regards,
    Sudarshan

  • How to identify the name of my smtp-mail host dynamically?

    Hi,
    I want to send an email from my system which has an internet connection.
    I don't know how to identify and mention the name of my smtp server ie; the smtp-host name that should be mentioned in my propetries object 'props' as props("mail.smtp.host","smtphostname");
    I want this program to work on other systems also,ie; It should dynamically find out what is the smtp-email host for the computer on which the program is running and set the smtp-host name in the 'properties' object dynamically.
    I will be thankful if anybody sends me code to solve this problem.
    Thank u in advance,
    Ravi.

    Write a mail scan to look for typical settings
    such as domain, mail.domain, smtp.domain, smtp.mail.domain
    where domain is after @ in an email address
    Have a SocketSearch class that uses non blocking via java.nio.channels.*
    so it can be interruptable and scan for these typical mail settings on default port 25 - The code using these interruptable socket can each be threaded to find the host/port and should find it in seconds
    Once found, store the settings in a configuration so you don't have to scan again unless it doesn't work anymore...
    If can't find the socket host/port via typical settings, next use a Java class that does a nslookup based on MX records - For example if you type "nslookup -type=mx javasoft.com" and you get mail exchanger = mail.java.sun.com and if you "telnet mail.java.sun.com 25" - you can see the port is open for sending emails.
    No expert in MX records for a domain to find the exact one and someone else can share some light on this...

  • SMTP Mail Adapter settings

    Hi Experts,
      I have small doubt regarding SMTP Mail Adapter settings.
    Right now i am sending files in attachment to the Users through SMTP.
    But  now User needs in MIME type for which i can see settings in Security Parameter.
    I can see is S/MIME, when i flag that i can see Duration like Days, hours, minutes, seconds.
    Could you please tell me what is the significance of it.
    Appreciate for your suggestions
    Regards,
    Bhasker

    Hi,
    >>>What does Duration means is that if i give duration that security archiving works for that duration
    nothing for now - this functionality does not work so it makes no difference what does it mean
    Regards,
    Michal Krawczyk

  • SMTP  - mail service

    Hi,
    i configured the SMTP for mail service.
    I can able to send mail to our domain   ( for ex: abc.com )  - default domain
    i gave SMTP Connection as  :  mail.abc.com 
    the above scenario --- will work for me if i send mail to our default domain. but i am not able to send to yahoo, gmail.
    Please help me ...
    --- Lee

    Hi Lee,
    In the SCOT, SMTP node you need to have the SMTP server address. if you've given the sap server IP address, then revert it back.
    What Juan has already mentioned,
    "you need to make sure that the IP address of the SAP System is populated on the SMTP relay agent for the mails to leave the domain." that means you've to tell your SMTP mail admin guys to add the SAP server IP address in the relay agent.
    Regards,
    Debasis.

  • Mail: Proper way to adjust IMAP/SMTP mail server entries?

    Please forgive, but I am still on 10.4 (Tiger) with an iCloud mail account. I believe this is still a widely applicable and helpful question!
    IMAP (Incoming Mail Server):
         MINE IS STILL:      mail.me.com  (Currently still working fine)
         Advised/required:     imap.mail.me.com
    SMTP (Outgoing mail server):
         MINE IS STILL:          smtp.me.com  (Currently still working fine)
         Advised/required:      smtp.mail.me.com
    QUESTION 1: To have the server entries set properly, can I simply make textual changes in the Incoming/Outgoing server name fields for my IMAP iCloud mail account (via insert of word "mail" in server names; change is not shown here)...
    ...or should one DELETE IMAP ACCOUNT (as I have commonly read!) and recreate with all new correct settings? If it is advisable to Delete the account, why wouldn't just making the quick server name adjustments be sufficient?
    Also, I need some fears assuaged:
    - "Deleting an IMAP mail account" in Mail has no risk/danger of losing/deleting all of your Sent and Received Inbox/Sentbox contents, correct? When you recreate an Account, all of your mail held on server is still fully safe and accessible, yes?
    ISSUE TWO:
    I like to use both my "me.com" and "mac.com" email addresses.
    Under "Edit (Outgoing) Server List," I still have a secondary older entry "smtp.mac.com" listed.
    QUESTION 2: Is the following statement of my understanding accurate?
    "Deletion of the smtp.mac.com outgoing server is completely acceptable and would not prohibit sending of email under mac.com email address because the "mac.com" email address is an alias for the me.com address and ALL mail (whether sent with mac.com or me.com email address) goes out through the ME.COM server."
    Is that correct. If not, kindly advise!
    I really appreciate the help.
    I am not a beginning Mac user and find that the complete configuration intricacies of Apple Mail (I know that's the old name) are one thing that users are never really guided to master and comprehend.
    Many thanks in advance!
    Bill from Maryland

    These are the settings recomended by Apple.
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead.

  • SMTP Mail configuration in WDS server

    Hi,
    My company has more than 9000 desktops in which normally on day basis more than 100-150 systems will go deployment via WDS (MDT 2013) in server 2008r2 (DHCP is also configured in the same server), Where as i need to configure a SMTP mail server which will
    export the lease expiration(currently reduced from 24hrs to 8hrs of lease period) data with hostnames & IP details and send it to my mail id.
    I am very least experienced in this domain, Kindly suggest the ideas to implement the same.
    Why required ?
    To monitor the number the images being deployed on a given day.
    No systems should reflect more than 1 day in the imaging vlan.
    Manual efforts and incidents can be reduced if implemented.
    Thanks,
    Satheeshkumar C

    Hi Satheeshkumar C,
    As far as I know there don’t have the original option can achieve your propose, when the DHCP lease expiration, may you can choose third party application, and this forum is
    mainly for WDS related issue it’s not the best place to talk about the MDT issue, there have a specific MDT support forum you can post in MDT support forum and get the MDT expert further support.
    MDT support 
    forum:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
    SMTP E-mail
    https://technet.microsoft.com/en-us/library/hh831469.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Adding an SMTP mail server to an existing Weblogic server on Windows 7

    Hi,
    I need to send e-mail from pl/sql, using UTL_MAIL, but my google searches don't find how to add an SMTP mail server to my pc.
    I have found that Microsoft offers IIS but I think the SMTP server could be part of Weblogic?
    Please redirect me to the proper Oracle Mail forum if it exists.
    Many thanks for your help.

    Sure, all you need to do is install the server with the mailbox role (and other roles, if you want), configure whatever mailbox databases you want on it (and configure the other roles you have added), then put mailboxes on it.
    Some advice - do not use the GUI for the installation because it will install default mailbox and public folder databases.  If you use the setup.com (the text-based installation), you can control databases.  We had to rebuild a server once and
    the engineer assisting us had us use the GUI and we ended up with a public folder database, which we had to remove (since we have no public folders in our organization).
    Once you have the new server installed, you can either create new mailboxes on it, or you can move existing mailboxes from your other databases to it.  With the Exchange 2010 move mailbox commands, this is a very simple process.
    BTW, when you get around to removing your P2V'ed system(s), make sure you handle any CAS virtual servers (OWA, ECP, OAB) and ensure they are hosted on a server that will remain.  You could end up painting yourself into a corner if you don't.

  • SMTP Mail Feed

    Hi there,
    Ok I have a little problem that I'm hoping somenone would kindly help with!
    • We currently have a Xserve 2009 running our company emails on
    • We use Easily for our domain name registration
    • We use EASYNET for our website hosting AND SMTP mail feed
    Basically we want to cancel our hosting and SMTP feed with EASYNET and go to anothr host but they don't supply SMTP mail feeds.
    Does anyone know what I can do in order to get a new host for our SMTP emails?
    Is there anything we can do on the Xserve that will help us or does anyone know of a company that offers JUST an option of having an SMTP feed?
    Any help would be amazing of you.
    Kind regards,
    Mark

    Hi Mark,
    I take it you are in the UK? send me an email and i'll try and point you in the right direction. You have a lot of options on how you can do this.
    All the best
    Beatle

Maybe you are looking for