SMTP Mail Server Address

Hi All!
Can we find the IP address of the SMTP mail server and its outgoing mail port number through java? If Yes, how?
regards,
Rajat Aggarwal

Hi!
Actually, I am using Java Mail API to send a mail.
However, i do not know the SMTP mail server's address
through which i should be routing my mail. I need
some way to find the IP Address and the port number
for this.In other words you're looking for random open relays to use to send spam through.
Why should we help you do something that's illegal almost everywhere and very poor ethics even where not?
If you've legitimate access to a mailserver you'll have been given the connection details.

Similar Messages

BLS Send Mail Action Block Requires SMTP Mail Server Mail Account

My SMTP Mail Server does NOT require authentication. It appears as if MII Ver 12 requires a mail account to be filled in on the BLS Send Mail Action Block. If the mail account field is left empty the transaction fails (error - mail account cannot be blank). Transaction works without the mail account on Ver 11.5 but Ver 12 requires the field to filled in. Please advise whether this is a new requirement in Ver 12 or a bug that needs to be addressed.

Hi Sam,
What I think is, it requires one mail account to send the mail and one to receive it.
There is no restriction on receiver that can be anyone. But the sender needs to be known that some mail has been sent from his mail account. So may be because of this the added authentification is required. It will use that mail account to send the mails.

RE: Using JavaMail with JSP when access relay is denied on smtp mail server

Could someone please let me know how to get around the problem of sending an automatic email from a JSP when access relay is denied by the smtp mail server. Could it be that the username and password just needs to be added somewhere???
Any thoughts on how to solve this problem would be greatly appreciated.
Thank you!

I know what you are talking about because I setup no relay on my mail server. I understand why you need to supply a username and password because if the server doesn't allow relay, then you must supply a username and password. Doing it by IP address wouldn't work because you have to know the IP address of all people accessing that page. I am in the same boat as you and once I find out the answer, you'll be the first to know. There is one quick workaround. Get your Net Admin to create a user specifically for the page you plan to send from. Get him to allow relaying for that one user. That worked on my setup and like I said, I'm setup the same way you are. Thanks, J

TS3276 Inadvertently deleted Outgoing SMTP Mail Server. Entered correct Yahoo email SMTP info and now SMTP is "Offline". Can't SEND emails. Help!

Inadvertently deleted SMTP Outgoing Mail Server address. Re-entered correct mail service provider's address and now have '(Offline)' tagged on server name. Can't SEND any emails. When I try, message will not send but goes into Outbox and sits. How can I get this SMTP address 'Online'? Help!

For whatever reason Yahoo blocked access to their mail servers from Apple Mail in the past couple of days. I deleted my Yahoo account in Apple Mail and tried to add it back. NO JOY.
Today, Yahoo has reopened their servers so that I could add my Yahoo account to Apple Mail again successfully. Even w the second app password.
The problem was at Yahoo. Apple Mail people were either blocked or knocked off from their Yahoo servers for a time. This may happen again as it has in the past. I hope it doesn't become a frequent happening.

Adding an SMTP mail server to an existing Weblogic server on Windows 7

Hi,
I need to send e-mail from pl/sql, using UTL_MAIL, but my google searches don't find how to add an SMTP mail server to my pc.
I have found that Microsoft offers IIS but I think the SMTP server could be part of Weblogic?
Please redirect me to the proper Oracle Mail forum if it exists.
Many thanks for your help.

Sure, all you need to do is install the server with the mailbox role (and other roles, if you want), configure whatever mailbox databases you want on it (and configure the other roles you have added), then put mailboxes on it.
Some advice - do not use the GUI for the installation because it will install default mailbox and public folder databases. If you use the setup.com (the text-based installation), you can control databases. We had to rebuild a server once and
the engineer assisting us had us use the GUI and we ended up with a public folder database, which we had to remove (since we have no public folders in our organization).
Once you have the new server installed, you can either create new mailboxes on it, or you can move existing mailboxes from your other databases to it. With the Exchange 2010 move mailbox commands, this is a very simple process.
BTW, when you get around to removing your P2V'ed system(s), make sure you handle any CAS virtual servers (OWA, ECP, OAB) and ensure they are hosted on a server that will remain. You could end up painting yourself into a corner if you don't.

Gmail smtp mail server verification

I have lately upgraded to CF10 from CF9.
Just lately I have noticed that I cannot get gmail smtp mail server verification within CFAdmin.
I am using the same settings as before. In fact, on an old machine using CF9 I still get mail server verification.
MAIL SERVER: smtp.gmail.com
USERNAME: [email protected]
PASSWORD: xxxxxxxxxx
SERVER PORT 25
x Enable SSL socket connections to mail server
Any insight would be greatly appreciated!
wayne

I double checked the code and there are no server attributes in the cfmail tag.
I also went through the troubleshooting gmail page link, and noted that everything was set correctly already.
I did a <cfdump var="#server#"> addition, and this is what was returned:
struct
coldfusion
struct
InstallKit
Native Windows
appserver
J2EE
expiration
{ts '2013-04-13 09:07:57'}
productlevel
Developer
productname
ColdFusion Server
productversion
10,0,9,284568
rootdir
C:\ColdFusion10\cfusion
supportedlocales
Chinese (China),Chinese (Hong Kong),Chinese (Taiwan),Dutch (Belgian),Dutch (Standard),English (Australian),English (Canadian),English (New Zealand),English (UK),English (US),French (Belgian),French (Canadian),French (Standard),French (Swiss),German (Austrian),German (Standard),German (Swiss),Italian (Standard),Italian (Swiss),Japanese,Korean,Norwegian (Bokmal),Norwegian (Nynorsk),Portuguese (Brazilian),Portuguese (Standard),Spanish (Mexican),Spanish (Modern),Spanish (Standard),Swedish,ar,ar_AE,ar_BH,ar_DZ,ar_EG,ar_IQ,ar_JO,ar_KW,ar_LB,ar_LY,ar_MA,ar_OM,a r_QA,ar_SA,ar_SD,ar_SY,ar_TN,ar_YE,be,be_BY,bg,bg_BG,ca,ca_ES,cs,cs_CZ,da,da_DK,de,de_AT,d e_CH,de_DE,de_LU,el,el_CY,el_GR,en,en_AU,en_CA,en_GB,en_IE,en_IN,en_MT,en_NZ,en_PH,en_SG,e n_US,en_ZA,es,es_AR,es_BO,es_CL,es_CO,es_CR,es_DO,es_EC,es_ES,es_GT,es_HN,es_MX,es_NI,es_P A,es_PE,es_PR,es_PY,es_SV,es_US,es_UY,es_VE,et,et_EE,fi,fi_FI,fr,fr_BE,fr_CA,fr_CH,fr_FR,f r_LU,ga,ga_IE,hi_IN,hr,hr_HR,hu,hu_HU,in,in_ID,is,is_IS,it,it_CH,it_IT,iw,iw_IL,ja,ja_JP,j a_JP_JP_#u-ca-japanese,ko,ko_KR,lt,lt_LT,lv,lv_LV,mk,mk_MK,ms,ms_MY,mt,mt_MT,nl,nl_BE,nl_N L,no,no_NO,no_NO_NY,pl,pl_PL,pt,pt_BR,pt_PT,ro,ro_RO,ru,ru_RU,sk,sk_SK,sl,sl_SI,sq,sq_AL,s r,sr_BA,sr_BA_#Latn,sr_CS,sr_ME,sr_ME_#Latn,sr_RS,sr_RS_#Latn,sr__#Latn,sv,sv_SE,th,th_TH, th_TH_TH_#u-nu-thai,tr,tr_TR,uk,uk_UA,vi,vi_VN,zh,zh_CN,zh_HK,zh_SG,zh_TW
os
struct
additionalinformation
[empty string]
arch
amd64
buildnumber
[empty string]
name
Windows 7
version
6.1
Thanks again for all your help... I really do appreciate that it takes a lot of your time!
Wayne

What is the outgoing (SMTP) mail server for iCloud?

What is the outgoing (SMTP) mail server for icloud?

dominic23:
That's just the name/description you can give the server that appears in Mail's preferences for that account.
After selecting Edit you can put in whatever you want in the description.
advisor81:
Why do you need to know the name? If you add an iCloud account in Mail all you really need is your Apple ID and password. The servers are automatically assigned.

Dpm 2012 email notification using a non-exchange smtp mail server

Has anyone successfully been able to configure DPM 2012 to send email notifications to a standard SMTP mail server (NON-EXCHANGE)?

Hi Happy,
I try with IIS6 SMTP server with Anonymous Access.
From DPM side, settings for "Authentificated SMTP Server: Username/password" :
1- Leave blank =>ID 2013 : logon failure : unknow user name or bad password.
2- DPMServerName\UserAccount => Works :)
Network trace with Wireshark :
1- Nothing => Most likely blocked by DPM console : Authentificated SMTP Server must be fill.
2- See full SMTP connection, mail send.
Could you do network trace to see what's happen ?
Stephane
Please remember to click “Mark as Answer” on the post that helps you. This posting is provided "AS IS" with no warranties. knowledge is valid only if it is shared by All.
My DPM blog Yet Another DPM Blog

Free POP of SMTP mail server

I am student, doing a project about javamail.
I only have mail hotmail and yahoo mail account which are not working with my program.
Actually i was trying to find a way to send and retrieve mail from them, since i'm going to pass my project soon, i just wanna find some other account which support the POP and SMTP, so i can do my testing!
Could someone tell me some free POP of SMTP mail server, which i can do my testing!!
Thanks

I am student, doing a project about javamail.
I only have mail hotmail and yahoo mail account which
are not working with my program.
Actually i was trying to find a way to send and
retrieve mail from them, since i'm going to pass my
project soon, i just wanna find some other account
which support the POP and SMTP, so i can do my
testing!
how to create a mail server
Could someone tell me some free POP of SMTP mail
server, which i can do my testing!!
ThanksI am student, doing a project about javamail.
I only have mail hotmail and yahoo mail account which are not working with my program.
Actually i was trying to find a way to send and retrieve mail from them, since i'm going to pass my project soon, i just wanna find some other account which support the POP and SMTP, so i can do my testing!

Mail Server "Type" and Mail Server "Address" for Incoming & Outgoing Mail

First, the only browser I use is Mozilla's Firefox, the best browser hands down. Second, I have both a Yahoo email account and a Google "gmail" account that I use regularly (daily). I am trying to set up a mail washing program to rid myself of these ridiculous spammers & scammers, however I need to the the Incoming & Outgoing mail server "type" & "address" to do this and I seem to have guessed the yahoo settings, but I can't seem to get the Google gmail account set up properly. Yahoo settings that worked are: Server Type="POP3" and Server Address="pop.mail.yahoo.com", with advanced settings: Secure Authentication=Required, Secure Connection (SSL)=Required, Store Cached Emails=Yes, Server Port Number=995 (set), Pipelining=Enabled. The equivalent settings for the Google gmail account result in an error message = "Failed to log into POP3 Server". Of course user name & password triple checked, Type=POP3, Address=pop.mail.gmail.com, and , Address="pop.gmail.com" tried also, Port and other settings the same. Where can I find this info for both accounts? Tanks a million! -jw

Yahoo and Gmail support should be able to help you.
Not related to Firefox support, web mail doesn't use POP or SMTP protocols which is what email clients such as Thunderbird use for communicating with email servers.

Mail: Proper way to adjust IMAP/SMTP mail server entries?

Please forgive, but I am still on 10.4 (Tiger) with an iCloud mail account. I believe this is still a widely applicable and helpful question!
IMAP (Incoming Mail Server):
     MINE IS STILL:      mail.me.com (Currently still working fine)
     Advised/required:     imap.mail.me.com
SMTP (Outgoing mail server):
     MINE IS STILL:          smtp.me.com (Currently still working fine)
     Advised/required:      smtp.mail.me.com
QUESTION 1: To have the server entries set properly, can I simply make textual changes in the Incoming/Outgoing server name fields for my IMAP iCloud mail account (via insert of word "mail" in server names; change is not shown here)...
...or should one DELETE IMAP ACCOUNT (as I have commonly read!) and recreate with all new correct settings? If it is advisable to Delete the account, why wouldn't just making the quick server name adjustments be sufficient?
Also, I need some fears assuaged:
- "Deleting an IMAP mail account" in Mail has no risk/danger of losing/deleting all of your Sent and Received Inbox/Sentbox contents, correct? When you recreate an Account, all of your mail held on server is still fully safe and accessible, yes?
ISSUE TWO:
I like to use both my "me.com" and "mac.com" email addresses.
Under "Edit (Outgoing) Server List," I still have a secondary older entry "smtp.mac.com" listed.
QUESTION 2: Is the following statement of my understanding accurate?
"Deletion of the smtp.mac.com outgoing server is completely acceptable and would not prohibit sending of email under mac.com email address because the "mac.com" email address is an alias for the me.com address and ALL mail (whether sent with mac.com or me.com email address) goes out through the ME.COM server."
Is that correct. If not, kindly advise!
I really appreciate the help.
I am not a beginning Mac user and find that the complete configuration intricacies of Apple Mail (I know that's the old name) are one thing that users are never really guided to master and comprehend.
Many thanks in advance!
Bill from Maryland

These are the settings recomended by Apple.
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead.

Dictamus smtp mail server question - help!

I'm just wondering if anyone else is having trouble using Dictamus on their iphone for sending dictations via email.
I recently put OS 5 on my iphone and I have upgraded to Lion on my imac. I recorded a dictation the other day on my phone and I tell it to send and it looks like it does but no one is getting my dictations in their email. I have tried troubleshooting and checked my SMTP settings and they seem to be correct.
I used to be able to send dictations no problem before I uprgraded - is anyone else having this problem of their emails not being sent?
I use a me.com account and would like to use that to send the emails. I have the smtp sever set to smtp.me.com and I have also tried smtp.mail.me.com and still my emails will not go thru.
Any suggestions or help is much appreciated.

We have been getting reports from quite a few MobileMe customers who cannot send mails from Dictamus. According to our investigations, Dictamus does send those mails correctly, and the me.com SMTP server acknowledges having accepted them for delivery. This is as far as anyone can track outgoing e-mail over SMTP, so Dictamus flags the respective dictation as "shared successfully". The problem is that after that initial acknowledgement, MobileMe silently discards some Dictamus mails (not all) without notification to either sender or recipient. This can happen if either recipient or sender are on MobileMe, so sending from a MobileMe address to another mail provider is subject to this issue as well as sending from another provider to MobileMe. Therefore, we currently recommend against using MobileMe accounts for sending mails from Dictamus. We are unaware of similar problems with any of the other large e-mail providers.
Michael Nagel
JOTOMI

Have to change mail server address when I go into office?!?!?

Hi there,
This may be a more broad networking-type issue, but I thought I'd post here as it's mail in which I am affected.
When I am on the road, I have an IP address in my "mail server" settings (IMAP). However, when I am inside the office network, this IP fails and I need to manually change it to the internal IP address.
Does anyone know a way around this issue, so that I (and all the other mobile people) could simply have the external IP address of the company permanently in account settings.
I'm thinking some way of forwarding requests to the external IP to the internal one.
Someone please help, it's a small but remarkably annoying situation!!
Thanks, Ben

This is not hard to fix, but requires access to your companies internet DNS server.
Most companies managed seperate dns zones one for interal and external.
The trick is to set up a External Zone on your internet DNS server. For example.
Your external mail server name is
mail.company.com(65.21.21.11)
and your internel name is
mailserver.company.lan (192.168.1.10)
Add a new zone to your Internal DNS server for company.com
Add all the A records from the external zone to the new internal zone, but use the internal IP addresses instead of the external.
Then on your mail client you just setup mail to point to mail.company.com and DNS will do the rest for you.
This makes life simple on the users, but is more work to update DNS because you have to manually change the records in both zones every time you update a DNS record.

How many ways we can configure SMTP Mail server on windows to get CCP mails

Hello IAC's,
I have configured SMTP server and teleneted in CCP server and also I'm receving mails too when I submit the orders.
I wondered with an update given by my friend that he is using pmail server for SMTP mails.
Can any one suggest me in how many ways we can enable the SMTP server.. on windows..??
Thanks,
Noor.

Hi
if i use String provider = "imap"; then it shows the following error message..
javax.mail.MessagingException: Connection refused: connect
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:479)
at javax.mail.Service.connect(Service.java:275)
at javax.mail.Service.connect(Service.java:156)
at javamail.AllPartsClient.main(AllPartsClient.java:39)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:232)
at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
at com.sun.mail.iap.Protocol.<init>(Protocol.java:84)
at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:87)
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:446)
... 3 more
pls any one give idea

Strange SMTP Mail server

I recently have gotten hostname mismatch errors in my Mail for one of my accounts. Does anyone know anything about this smtp server?
smtp.eigbox.net
Thanks

In Terminal.app, I did a host smtp.eigbox.net which yielded smtp.eigbox.net has address 38.113.1.135. I also did a host 38.113.1.135 which yielded 135.1.113.38.in-addr.arpa domain name pointer ip38-113-1-135.yourhostingaccount.com. I also did a whois 38.113.1.135 which yielded a PSINet, Inc. COGENT-NB-0002 (NET-38-112-0-0-1). Does yourhostingaccount.com or PSINet mean anything to you?

SMTP Mail Server Address

Similar Messages

Maybe you are looking for