SMTP relay works for external recipient but not for internal recipient

Relay allowing external recipients but not internal recipients. Running Exchange 2010.

Whats the error you gotten for the NDR
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

Similar Messages

Can PING/ASDM/SSH to External IP but not to Internal IP on PIX itself

We have two networks HQ and Site1 and for some reason we can’t ping the inside IP for Site1 PIX device. We have site-site-VPN set up between the two and everything works fine except we can’t ping the Site1 PIX from internal IP. However, I can ASDM/SSH in from HQ to the external IP of the Site1 PIX.
HQ is using an ASA 5550 (172.1.0.1)
PC from HQ (172.1.64.x)
Site1 is using a PIX-515E (172.2.0.1)
PC from Site1 (172.2.64.x)
Ping from HQ PC to Site1 PC (172.1.64.x to 172.2.64.x) works fine
Ping from Site1 PC to HQ PC (172.2.64.x to 172.1.64.x) works fine
Ping from HQ PC to Site1 PIX internal IP (172.1.64.x to 172.2.0.1) doesn’t work
Ping from HQ PC to Site1 PIX external IP (172.1.64.x to Site1 external IP) works fine
ASDM/SSH from any HQ PC to Site1 PIX internal IP (172.1.64.x to 172.2.0.1) doesn’t work
ASDM/SSH from any HQ PC to Site1 PIX external IP (172.1.64.x to Site1 external IP) works fine
Everything was working fine until we recently changed the outside IP address for Site1 because we switch to a different ISP. Nothing changed on the HQ ASA or Site1 PIX other than the outside IP address on Site1 PIX. I did rebuild the site-to-site VPN tunnel between Site1 and HQ.
Thanks first in advance for any ideas/suggestions.

Thanks Julio for your reply. We are currently running PIX Version 8.0 (3) and yes we do have management-access inside configured.
Cisco PIX Security Appliance Software Version 8.0(3)
Device Manager Version 6.0(3)
Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics access-list

Sound from external speakers, but not from internal speakers

I tried searching as much as I could and couldn't find an answer....
I always use my function keys to turn my volume up and down. It has worked fine until today, then all of a sudden, my internal speakers wont turn up or down when I use my function keys. The volume window comes up and below the volume level bar there is a circle with a line through it (like no smoking sign, but without the cigarette)which I guess leaves my internal speakers on mute.
So i came home, and plug in my logitech speakers, and I can control the volume fine from my function keys. Then I disconnect my logitech speakers from my computer and I get the same problem with my internal speakers.
I probably confused everyone but I guess a short version is my function keys wont turn on my internal speakers, and when I have external speakers plugged in, everything is normal.
Please help.
Thanks,
Brendan
Black 13" Macbook 2ghz Core 2 Duo 2GB Mac OS X (10.4.8)

If you look in the headphone jack, can you see a glowing red light? This happened to many people, it was an issue where a switch got tripped to make the computer to think that a pair of headphones or external speakers were plugged in. Try inserting a toothpick inside the headphone jack and gently probing around in there to try and turn off the switch.
See here.
And by the way, you don't need to bump topics that are only three hours old.
Message was edited by: aqua*star

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

Did you select View->Bcc Address Field from the menu bar?

Html link to pdf works ok on mac but not on ipad. adobe reader for ipad downloaded.

HTML link to pdf works ok on Mac but not on ipad. Adobe Reader for ipad downloaded. What's wrong?

Hi pwillener,
Thank for reply. The pdf’s are in a subfolder “PDF” of the folder holding the web page. The web page itself uses
. This works in full size computer browsers but not in an iPad.
My excursion through the search engine has produced the idea of adding #page = requesting page to the URL but I have not had time to try it perhaps without the = sign.
Bryan

HT5787 How can I change an old email to a new one? For some reason my old email comes up on my iPhone - and I don't get access to change to my new email which I have on my iCloud account on my pc. My AppleID works on my pc, but not on my iPhone!

How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
Br
Finn

You would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Superdrive works on XP/bootcamp but not on OSX?

So, I've been through this a billion times. Even time-machined & formatted. But nothing works..
I went through about 200 DVD's trying to put together a proposal for school and it kept failing to burn. With Toast, Disk Utility, Drag&Drop notta. Finally pulled the data onto my external, booted into Windows using boot camp, used nero, and worked without a Hitch.
I've tried every trick on this site and on every other site possible. Tech support says that i'm free to pay em to replace the drive and tried arguing with em bout the bootcamp working etc.. (long story), but eh... fail! (mac support = worse then windows at this point)
I have a hard time feeling this is a Hardware issue since it works on the Windows BootCamp partition but not on the Mac OSX 10.5.4 partition.
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZA0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds
I'm not as fluent in mac as i am with windows (MCSE/MCSA) but going to 2 years of electrical school I damned well know this most likely is a software issue not hardware.
After spending three days reading in this forum i havn't found anything that works or similar to someone saying it works in bootcamp partition but not osx... sooo just curious if anyone's got any ideas worth while..
thanks!

There is no way to do this and I don't believe Apple would view this as an "issue"; in my humble opinion, it is because iMacs have a gorgeous display (your choice of 21.5 or 27") and therefore were not necessarily designed to be used with a second display, whereas laptops were - hence the available option to use it in clamshell mode:
http://support.apple.com/kb/HT3131
Edit: You can create a totally black image and use that as your desktop picture if you like.
Message was edited by: Barbara Daniels1

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

If you made backups of all of your photos and your catalog file using some third-party method (i.e. not using the PSE catalog backup command), then you should be able to restore everything.
Step 1. Put the photos in the EXACT SAME LOCATION as before. For example, if they were in subfolders of C:\Users\<username>\Documents, then they must go into the exact same subfolders of C:\Users\<username>\Documents.
Step 2. Move the catalog file to wherever you want it to be, and then double-click on it.

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

SMTP relay works for external recipient but not for internal recipient

Similar Messages

Maybe you are looking for