SMTP service not responding (ims 5.2)

Are rebooting our NT server, the SMTP service (dispatcher) is running, but not responding to SMTP commands such as helo. I ran imsimta dirsync -F and nothing changed. The only solution that I found was to backup the directory services and queues, then uninstall and re-install the software. I hope that isn't the only fix.

Jerry I'm running into the same problem this is an issue the is supposed to be fixed in 5.2. Try stopping the SMTP inbound service and starting the other services. If that does not work disable the SMTP inbound and mail delivery service reboot navigate to server_root\msg-servername\imta\tmp delete all the locked files switch the services back to automatic and start them. I hope this helps and iPlanet fixes this issue

Similar Messages

Mail Problems - SMTP server not responding: "offline"

I am currently testing DSL service for a month; set up Mail just before I downloaded the 10.7.3 release. Tested it once and it worked; did not use it to send emails since because I am only testing this (including the email address). I have been receiving emails (which I forwarded to myself from my cable provider's website); today, I wanted to send an email and a 6 hour troubleshooting saga began....
Total of 2 hours with Centurylink tech support; 1 1/2 hours with Applecare, and another 30 minutes with Centurylink.
During that time, all different settings were tried, turned on/off. POP server ok, SMTP server not responding. With Applecare, tried it on both the iMac and the Macbook; also tried it after booting into Snow Leopard - SMTP server not responding ("offline"). Applecare tech stated that it has to be the server since we tried it on two machines as well as SL. Centurylink insists there is nothing wrong with their server, but it's Mail's fault.
So, I finally gave up for the evening, but wonder if there is something amiss with Mail in 10.7.3 (both machines are on the same version) and during the troubleshooting, I noticed an anomaly: in a new message window, there was no choice to choose an account to send from which I thought was odd.
I was thinking of a new install or to clone back? My clones are up to date though, I have no older clones. I do have a fresh install but it's also the latest one from MAS. Or I could just boot from the fresh install and set up Mail to see if it would work?
Grateful for any ideas....

Thanks to everyone; as you can imagine, all settings/configurations were tried yesterday (even booting into SL); Apple said it's Centurylink's fault, and they insisted there was nothing wrong with their server.
FWIW, I unplugged my Comcast cable (it is still active though and I'm getting TV reception, just unplugged the modem for now); right now, my internet access and email account are with Centurylink for the test. I still access my Comcast mail via their web interface email account.
Anyway, thanks to a good friend's idea, I decided to check keychain access and to make it short: the issue is fixed and the problem definitely had something to do with the OS because:
When I first checked keychain, this is what I saw:
I then checked Comcast settings and there were two: one was checked "allow all apps..." and the other had the "confirm" with Mail listed under the applications.
So I figured it's so screwed up, I probably can't make it any worse, so I deleted the Internet Accounts and added Mail to the smtp.centurylink...:
And......... it then worked! These default "internetaccounts" obviously aren't being recognized by Centurylink's server?
And, to make sure that was it, I not only did the same thing on the Macbook, but also booted into a pristine "backup" fresh install (no added apps or files, just default OS), launched Mail and couldn't send. Launched Keychain, changed the apps to Mail, and I was able to send email.
I would call that a bug? Or not? In any case, I'll be calling back Applecare and tell them to add the above to the very long log from yesterday and to make a note that "internetaccounts" doesn't work with everything.

Web service not responding

Hi,
Issue - Web service not responding when we deploye the .ear file in prod instance. Same web service working fine in test instance.
We are using Oracle Enterprise Manager 10g server.
It is urgent for us.
Thanks,

If it is urgent, call support. Besides, this is the wrong forum as this is for Sun Application Server related issues.

Why come up the "service not responding " message during operation

Dear all
I have some critical issue about servie not respondig message occurred during the N7K operation
N7K_XXX# conf t
Enter configuration commands, one per line. End with CNTL/Z.
N7K_XXX(config)# ip access-list nh
Service not responding
N7K_XXX(config)#
N7K_XXX(config)# end
that happen take about 15 minute however running show command normal and system also turnning the normal mode after 15minute.
anybody know about kind like happen,or any solution or why come up that message
please help out for me
thanks.

Hi evan191,
Thanks for using Apple Support Communities. This article has some steps you can try if your messages aren't sending as iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Cheers,
- Ari

Smtp server not responding

imsimta version:-
Sun Java(tm) System Messaging Server 6.1 (built Apr 28 2004)
libimta.so 6.1 (built 13:10:36, Apr 28 2004)
When I make some changes to the imta.cnf file,
I get the following error
18:17:57.85: Can't find channel in table
in the file
tcp_smtp_server.log-*
(this file is in the log directory)
The result of the above seems to be that though the smtp server is listening on port 25, as can be observed from
netstat -an | grep *.25,
yet when I do a "telnet localhost 25", the session
gets hung.
I see no reason why the smtp server is not responding.
Can you give me any possible reason for it.
thanks,
Kamal.

The configuration file is as follows:-
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
tapti.planetasia.com $U%[email protected]
planetasia.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.planetasia.com $U%$H.planetasia.com@tcp_intranet-daemon
* $U%$&0.planetasia.com
! reprocess
reprocess $U%reprocess.tapti.planetasia.com@reprocess-daemon
reprocess.tapti.planetasia.com $U%reprocess.tapti.planetasia.com@reprocess-daemo
n
! process
process $U%process.tapti.planetasia.com@process-daemon
process.tapti.planetasia.com $U%process.tapti.planetasia.com@process-daemon
! defragment
defragment $U%defragment.tapti.planetasia.com@defragment-daemon
defragment.tapti.planetasia.com $U%defragment.tapti.planetasia.com@defragment-da
emon
! conversion
conversion $U%conversion.tapti.planetasia.com@conversion-daemon
conversion.tapti.planetasia.com $U%conversion.tapti.planetasia.com@conversion-da
emon
! bitbucket
bitbucket $U%bitbucket.tapti.planetasia.com@bitbucket-daemon
bitbucket.tapti.planetasia.com $U%bitbucket.tapti.planetasia.com@bitbucket-daemo
n
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel
immnonurgent maxjobs 7 defaulthost planetasia.com planetasia.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7 pool LOCAL_POOL
tapti.planetasia.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m"
"pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric sub
dirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tc
p_auth missingrecipientpolicy 0
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SM
TP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipi
entpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipien
tpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver delive
ryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp subdirs 20
!tcp_lmtpss-daemon
! tcp_lmtpsn (LMTP server - native)
!tcp_lmtpsn lmtp subdirs 20
!tcp_lmtpsn-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool S
MTP_POOL dequeue_removeroute
!lmtpcs-daemon
! tcp_lmtpcn (LMTP client - native)
!tcp_lmtpcn defragment lmtp port 226 nomx single_sys subdirs 20 maxjobs 7 pool S
MTP_POOL dequeue_removeroute
!lmtpcn-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold slave
hold-daemon
thanks.

SMTP service not available

Hi,
How to send mail through the following code ?
CREATE OR REPLACE PROCEDURE send_mail (p_to IN VARCHAR2,
p_from IN VARCHAR2,
p_message IN VARCHAR2,
p_smtp_host IN VARCHAR2,
p_smtp_port IN NUMBER DEFAULT 25)
AS
l_mail_conn sys.UTL_SMTP.connection;
BEGIN
l_mail_conn := sys.UTL_SMTP.open_connection(p_smtp_host, p_smtp_port);
sys.UTL_SMTP.helo(l_mail_conn, p_smtp_host);
sys.UTL_SMTP.mail(l_mail_conn, p_from);
sys.UTL_SMTP.rcpt(l_mail_conn, p_to);
sys.UTL_SMTP.data(l_mail_conn, p_message || UTL_TCP.crlf || UTL_TCP.crlf);
sys.UTL_SMTP.quit(l_mail_conn);
END;
BEGIN
send_mail(p_to => '[email protected]',
p_from => '[email protected]',
p_message => 'This is a test message.',
p_smtp_host => 'mail.google.com');
END;
ERROR:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "APPS.SEND_MAIL", line 9
ORA-06512: at line 2
Please help me to get through the error.
Thanks in advance ,
Pradeep
Edited by: user11165897 on Dec 7, 2012 2:27 AM

Hi,
here all the input values are wrong.
By providing correct host, email, port it is working fine now..
pradeep

Hyperion Integration Services - Not responding

Hi,
I forcefully closed the EIS console during Member Load using windows "Task Manager". When I re opened the EIS console and trying to connect to the EIS server it's not responding. It happened many times. It works again only if I restart the EIS server. But restarting the server every time is not recommended. Could you guess what would be the reason for this. And suggest me the solution.

Hi,
Have you had a look at the EIS log in Hyperion\AnalyticIntegrationServices\log\olapisvr.log to see if you can see any clues to why it is crashing.
Cheers
John
http://john-goodwin.blogspot.com/

SMTP Server not responding to emails sent to 1 address externally

I've set up a mail server on a 10.4.11 machine. Everything was working fine until I accidentally deleted my personal account via Workgroup manager, I figured since it was IMAP I could just recreate it and everything would work as it once did. It didn't, now when I send emails to that address, the smtp log shows nothing, but yet I do not receive a failure message back to the sender. However, the messages sent internally from other addresses in that server work properly. In summation, I can't use an external address to send emails to one of my accounts, the smtp log doesn't even show an attempt made to connect to the server.
Also, all the other addresses work fine.
Here's my postconf -n:
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps =
luser_relay = postmaster
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost, [removed for security]
mydomain = [removed for security]
mydomain_fallback = localhost
myhostname = [removed for security]
mynetworks = 127.0.0.1/32,[removed for security]
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
here's my postconf:
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
broken_sasl_auth_clients = no
canonical_maps =
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_errors_to = no
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG
fallback_relay =
fallback_transport =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
hash_queue_depth = 1
hash_queue_names = incoming, active, deferred, bounce, defer, flush, hold, trace
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY
in_flow_delay = 1s
inet_interfaces = all
initial_destination_concurrency = 5
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_cache_connection = yes
lmtp_connect_timeout = 0s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_lhlo_timeout = 300s
lmtp_mail_timeout = 300s
lmtp_quit_timeout = 300s
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 120s
lmtp_sasl_auth_enable = no
lmtp_sasl_password_maps =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_send_xforward_command = no
lmtp_skip_quit_response = no
lmtp_tcp_port = 24
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_recipient_maps =
local_transport = local:$myhostname
luser_relay = postmaster
mail_name = Postfix
mail_owner = postfix
mail_release_date = 20040915
mail_spool_directory = /var/mail
mail_version = 2.1.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_size_limit = 10240000
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
sender_based_routing = no
sender_bcc_maps =
sender_canonical_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_connect_timeout = 30s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_enforce_tls = no
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 0
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 120s
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $var_smtp_sasl_opts
smtp_sasl_tls_verified_security_options = $var_smtp_sasl_tls_opts
smtp_send_xforward_command = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_cipherlist =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_scert_verifydepth = 5
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_limit_exceptions = $mynetworks
smtpd_client_connection_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_reject = yes
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = none
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_application_name = smtpd
smtpd_sasl_auth_enable = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_cipherlist =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_key_file =
smtpd_tls_loglevel = 0
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = no
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_daemon_random_source =
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 60s
tls_random_reseed_period = 3600s
tls_random_source =
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
Message was edited by: JVicious
Message was edited by: JVicious

Ok, so I used mailfbr to try and fix it anyways, just to see what would happen. That didn't fix it, so I thought I could use the Backup program and just restore to an earlier point to see if the original settings could be restored, tat didn't work either, that totally messed everything up worse. I've had problems connecting to the lmtp socket, reading the mailbox file, permissions, but I think I've fixed all those. The only problem now is that everything gets stuck in the queue. I've checked these topics almost the whole day for these problems, but the cause and solution are not the same for me. Anything I can do? Or should I just start fresh again?
postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
70-91-236-58-BusName-Michigan:/usr/sbin root# postconf -n
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps =
luser_relay = postmaster
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname,localhost.$mydomain,localhost,aetkinz.com,sellwiz.biz,riflematch.co m
mydomain = aetkinz.com
mydomain_fallback = localhost
myhostname = mail.aetkinz.com
mynetworks = 127.0.0.1/32,10.0.11.0/24,192.168.34.0/24
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550

Shared services not responding...

Previous shared services used to work fine..
today all of a sudden it stoped showing login page....after 30 minutes.. internet explorer cannot display this page.....
tried to restart the services for ldap and shared services....its showing that the services can't be stopped....
even restart of the server didnt work....
can anyone let me know the reason for this
even tried to use recovery.bat scripts.....
one more question do i need to re-configure all the applications installed on the server....
Thanks in advance....
Edited by: user649524 on Jan 6, 2009 7:39 PM

If you remove the OpenLdap directory (\Hyperion\SharedServices\9.3.1\openLDAP) , then run the shared services installer again it should create it again.
You will have to configure Shared services again, as for keeping your registered apps I am not so sure on, you might be lucky and reuse the same database when you configure, if not then you will have lost it all and will have to reregister the products with SS.
Strange you couldn't recover the openldap db usually it is fine if you roll it back to a date when it was working fine.
Cheers
John
http://john-goodwin.blogspot.com.

AIM service not responding????

It has been three days, and I keep getting this message: The AIM service is temporarily unavailable. Wait several minutes and try again. I have checked my preference settings, .mac account and the password is correct. Using ichat 3.0.1 with Tiger. Don't know what to do. Please help me get my ichat back.

I too have not been able to connect for almost 48 hours of trying. This is becoming increasingly annoying. Wondering if this is related to AIM 4.7 for the Mac release!
I've also spoken to a few friends who are all also having problems. Seems AIM are shutting out iChat '@mac.com' clients.
Logging in with an AIM account is working fine although it is ridiculous that we should have to do this as it means advising all buddies of the change.
Is this something that should be addressed by AIM or Apple though? As Apple are encouraging .mac accounts, I would suspect it be Apple that should be addressing this problem or at least inform everyone what the problem is!

SMTP service failure

I have been quite happy with JES messaging server 2005Q4 until recently. The other night SMTP service failed at around 1:04am. I had to restart the processes using "imsimta restart". Then, last night, the same thing happened again but this time at 1:29am. I had to restart the process again. I got the following alarm message from the server before it stops responding (similar alarm for the other night as well);
Server instance: /opt/SUNWmsgsr
Alarmid: serverresponse
Instance: smtp
Description: server response time in seconds
Current measured value (13/Jun/2006:01:26:21 -0700): 80
Lowest recorded value: 0
Highest recorded value: 80
Monitoring interval: 600 seconds
Alarm condition is when over threshold of 10
Number of times over threshold: 10
I checked my cron list to see if something is running around that time, but nothing. There is also no clue in any log files including /var/adm/messages and /var/opt/SUNWmsgsr/log/* . Nothing has been logged about any failure or error.
I enabled the watcher to restart the failed processes now, but I need to know why it started failing.
I also tried to find a correlation between the number of SMTP connections and that failure. Although it seems to be unneededly high due to spams, there are some other times that it hits much higher values, and it survives. So, it does not seem to be the number of connections handled by the server. It is something else, but what?
Any comments!

Here are the details;
1) lithium# imsimta version
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS lithium 5.10 Generic sun4u sparc SUNW,UltraSPARC-IIi-Engine
2) - SMTP was not responding.
- No core file.
- I do not know how to allow/disallow a core file. But, I guess, the system can produce a core file, because I have seen core files couple of times so far while I was trying to get it running during the installation phase.
3) The followings are taken before the restart:
lithium# imsimta process
USER PID S VSZ RSS STIME TIME COMMAND
mailsrv 349 S 32528 6552 Jun_12 01:08 /opt/SUNWmsgsr/lib/dispatcher
mailsrv 351 S 32360 6624 Jun_12 00:11 /opt/SUNWmsgsr/lib/job_controller
mailsrv 22888 S 33016 11232 01:25:21 00:00 /opt/SUNWmsgsr/lib/tcp_smtp_server
mailsrv 22895 S 33728 13280 01:25:59 00:01 /opt/SUNWmsgsr/lib/tcp_smtp_server
mailsrv 22896 S 33744 13344 01:25:59 00:01 /opt/SUNWmsgsr/lib/tcp_smtp_server
lithium# top
load averages: 0.23, 0.14, 0.13 01:45:12
64 processes: 55 sleeping, 7 running, 1 zombie, 1 on cpu
CPU states: 96.0% idle, 1.6% user, 2.4% kernel, 0.0% iowait, 0.0% swap
Memory: 384M real, 17M free, 618M swap in use, 119M swap free
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
499 root 48 59 0 0K 0K run 385:57 2.95% ns-slapd
23666 mailsrv 1 59 0 32M 10M sleep 0:00 2.54% msprobe
23665 root 1 59 0 3720K 1368K cpu 0:00 0.72% top
658 mailsrv 3 59 0 121M 7696K sleep 138:01 0.48% mshttpd
23654 root 1 59 0 8304K 4624K sleep 0:00 0.31% sshd
349 root 14 59 0 32M 6552K sleep 1:08 0.27% dispatcher
597 root 70 59 0 99M 5760K run 69:51 0.24% ns-httpd
747 root 118 59 0 413M 53M run 85:45 0.22% webservd
730 root 31 59 0 138M 18M run 55:02 0.19% webservd
79 daemon 3 59 0 4256K 1544K sleep 0:02 0.09% kcfd
656 mailsrv 2 59 0 103M 2680K run 18:42 0.06% stored
23657 root 1 59 0 8088K 2448K sleep 0:00 0.05% sshd
23659 root 1 59 0 1272K 1000K sleep 0:00 0.05% sh
655 mailsrv 3 59 0 9080K 528K sleep 11:50 0.04% enpd
778 root 1 59 0 2600K 312K run 11:13 0.04% magt
4) No messages in /var/adm/messages, not even a line
5) details in (3)
6) No response to SMTP port connection

Activity Monitor shows Compressor functions as (Not Responding)

Hi Forum
I have noticed in Activity Monitor that I repeatedly get these messages in red:
CompressorJobController (Not Responding
qmasterqd (Not Responding)
CompressorTranscoderX (Not Responding)
ContentController (Not Responding)
Qmaster Task Service (Not Responding)
I have been force quitting them and then they continue to show up even if I don't have compressor open.
I compressed a 40min HD at 800kbs last night - I woke in the middle of the night thinking it would be done and it was only half way done. I opened Activity monitor to see what was going on. It said that the these functions were (Not Responding). But i noticed activity in the cpu column and in the threads and processes window. I decided to see if it was really hung. I let it go till morning. I finished in about 8 hours. Can this be true?
I am on the top of the line 17inch Macbook Pro. It seems like there are some anomalies that I don't understand. Should I disregard these recurring functions that say they aren't responding?
thanks
david

Here is some investigation I did, maybe someone can use this!?
While everything is running and suddenly all **** breaks loose, or rather just freezes in time.
Open Activity Monitor and select CompressorTranscoder and click the Inspect icon, you will get the process details and check the 'Open Files and Ports' tab.. There is where you will find all the files this process needs!! Here is the issue! you will notice some temporary and cache items,. open the terminal and using commands navigate to those file locations and Voila!! you see those files dont exist!! thats why this service has hanged.. The apple team needs to figure out how these files got closed without compressorTranscoder knowing about it!! BUG BUG BUG!!!

SMTP not responding properly

Hello,
I am running iMS 5.1 with bundled directory services 4.1 on a win2k.
yesterday there was a power failure and the server went for an abnormal reboot. Since then my iMS is not responding properly.
I am able to connect to port 25 but then after that theer is no respose from the server, it just hangs at that.
Even when I try to dirsync -F it will just not complete and will stay there.
What do I do now?
Pls help I am in a dire situation.
Regards,
Sanvir Jham

Thanks for the hint.
I finally managed to remove the dirsync.lock. __db_lock.share and __db_mpool.share from <server-root>/imta/tmp/ after making the iplanet services manual and then restarting the win2k server.
After removing these lock files, I again switched my iplanet services to automatic and restarted the machine.
Now the server sings :)
Thanks for replying,
S.

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests

Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
Jaz

Hi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

SMTP service not responding (ims 5.2)

Similar Messages

Maybe you are looking for