SMTP timeout on localhost

Hi,
I have configured my SMTP server on my Windows server 2012.
No authentication
relay and connection enabled for 127.0.0.1
Message Limit All Off
Firewall All Off
SMTP service restarted
I am using SendMail v2.2.2 from dipisoft to test SMTP server.
If I am trying to send mails from client computers then everything is OK.
But If I am doing the same from my server computer (same computer where SMTP service installed) than every client program (SendMail also) gives me error or timeout.
If I restart the SMTP service the first send gives me no error (but the email is not arriving), after that SMTP constantly gives me timeout. From Client PCs still everything is working.
Please help me solve this problem, I am out of ideas.
Thank you in advance,
Dave

Additional info: if I put email.txt to Pickup Folder than the mail is sent successfully.

Similar Messages

Mail Server issues: non-SMTP command from localhost

I just installed Yosemite server. Noticed these messages showing up in the log:
Oct 28 06:32:08 my_server.net postfix/smtpd[28380]: warning: non-SMTP command from localhost[127.0.0.1]: From: Mrs. M.M Macheda <[email protected]>
Oct 28 06:32:08 my_server.net postfix/smtpd[28382]: warning: non-SMTP command from localhost[127.0.0.1]: From: Mrs. M.M Macheda <[email protected]>
Oct 28 06:32:08 my_server.net postfix/smtpd[28380]: disconnect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/smtpd[28382]: disconnect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52786 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52786
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52787 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52787
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52788 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52788
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: CONNECT from [127.0.0.1]:52789 to [127.0.0.1]:25
Oct 28 06:32:08 my_server.net postfix/postscreen[27405]: WHITELISTED [127.0.0.1]:52789
Oct 28 06:32:08 my_server.net postfix/smtpd[28371]: connect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/smtpd[28371]: improper command pipelining after EHLO from localhost[127.0.0.1]: MAIL FROM:<[email protected]>\\r\\nRCPT TO:<[email protected]\\r>\\r\\nDATA\\r\\nFrom: Mrs. M.M Macheda
Oct 28 06:32:08 my_server.net postfix/smtpd[28386]: connect from localhost[127.0.0.1]
Oct 28 06:32:08 my_server.net postfix/smtpd[28386]: improper command pipelining after EHLO from localhost[127.0.0.1]: MAIL FROM:<[email protected]>\\r\\nRCPT TO:<[email protected]\\r>\\r\\nDATA\\r\\nFrom: Mrs. M.M Macheda <he
Here is output of postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5
html_directory = /usr/share/doc/postfix/html
inet_interfaces = loopback-only
inet_protocols = all
mail_owner = _postfix
mailbox_size_limit = 0
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
message_size_limit = 10485760
mynetworks = 127.0.0.0/8, [::1]/128
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated permit
smtpd_tls_ciphers = medium
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
Except me nobody has access to the server yet. Nobody is sending out any emails. Appreciate any help.

What does /var/log/mail.log have to say (you may need to increase logging level to "Information")?

All of a sudden I cannot Forward emails in TB 31.1.2 - I get SMTP timeout error

And I've tried everything. Shutdown Emsisoft virus prot., turned off firewall, got into Verizon router (btw, I'm going right into the Verizon router-not thru a switch), no port forwarding, even tried to forward an email in Safe mode in Win 8.1 x64. This just happened. I can Write an email OK (i.e., from scratch), but just forwarding, even a small text message won't forward. I even installed an older version of TB. HELP! HELP!
I either get the SMTP timeout error or I get "check your email and messaging settings." My wife has the exact same setup in TB 31.1.2 but she uses Win 7 x86. -gg

This has been reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
Several other people have sent in the same support request as you, noting this happened after they upgraded to version 31.1.
The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
'''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
* While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
* Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
'''About automatic updates'''
Automatic updates are the default in Windows.
You can [https://support.mozilla.org/en-US/kb/configuration-options-updates?esab=a&s=automatic+updates&r=1&as=s customize such behavior], however, it's under '''Tools > Options > Advanced > Update'''.
My suggestion would be to set it to '''Check for updates, but let me choose wether to install them.''', specially if you depend on email for critical / important business or personal matters.

Setting the JavaMail properties especially: mail.smtp.timeout

Hello,
I am desperately trying to set the mail.smtp.timeout on a Spring JavaMailSenderImpl.
Here is what I undertook:
<bean id="mailSender" class="org.springframework.mail.javamail.JavaMailSenderImpl">
<property name="host" value="${mail.server}"/>
<property name="port" value="${mail.port}"/>
<property name="javaMailProperties">
<props>
<prop key="mail.smtp.connectiontimeout">1000</prop>
<prop key="mail.smtp.timeout">1000</prop>
</props>
</property>
</bean>
The javaMailProperties seem to be completely ignored by my Java Mail implementation. Can anyone please help?
If I can't set this property through Spring, how can I set it?
Thanks in advance,
Julien.

I notice the API documentation for com.sun.mail.smtp says that property should be an int. Is it possible that Spring doesn't know that, and sets it as a String by default? And that you should be specifying the property type somehow?
Note: I know nothing about Spring except what it's for. This is just speculation.

SMTP Timeout - I tried everything

I'm getting an SMTP Timeout Error. Here's what I've tried:
-Checking my SMTP settings
-Resetting my email password then updating it in Thunderbird
-Reinstalling Thunderbird
-Deleting my Thunderbird profile and re-adding it (many times)
-Using a different SMTP (Amazon SES)
-Disabling my firewall
-Disabling my anti-virus (Microsoft Security Essentials)
-Using ports 25, 465, and 587
-Deleting my password, then re-adding it when prompted
-Deleting all passwords in the password manager
-Tried using no security/protection, SSL, TLS, etc.
-Adding port exceptions to firewall
-Adding Mozilla exceptions to firewall
-Removing exceptions from firewall
Error Log:
Timestamp: 8/16/2014 12:49:29 PM
Error: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIMsgMailNewsUrl.server]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: resource:///modules/activity/alertHook.js :: alertHook.onAlert :: line 48" data: no]
Source File: resource:///modules/activity/alertHook.js
Line: 48
Timestamp: 8/16/2014 12:51:26 PM
Error: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIMsgMailNewsUrl.server]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: resource:///modules/activity/alertHook.js :: alertHook.onAlert :: line 48" data: no]
Source File: resource:///modules/activity/alertHook.js
Line: 48
I receive emails just fine, sending is the problem. I've had this problem for a few months now and it's getting really annoying.

The actual error message:
http://i.gyazo.com/fd8bab2147aba6f813054b900436d231.png
The only thing I got from the log:
0[220f140]: SMTP Connecting to: smtpout.secureserver.net
I am using a DSL Modem, however I'm in Germany using Telekom. The modem is a Speedport 724v (pretty restrictive in general), which is actually a modem/router combo (I hate them but there was no other option).
After doing a port scan this is what I've found (hopefully this is accurate):
http://i.gyazo.com/a93a7443bbe5aa9245db7504bb9f74c2.png
From these results, I tried this but still nothing:
http://i.gyazo.com/f26022c708f76ee548e415ee70545b25.png
Thank you for your time!
Edit: I also do use FTP (FileZilla, assuming it uses port 21) and I have no issues.

Not able to set the SMTP timeout session on BIPublisherAPI

Any of the below parameters are not taking into effect:
deliveryRequest.addProperty(DeliveryPropertyDefinitions.ASYNC_CHECK_INTERVAL,
"1");
deliveryRequest.addProperty(DeliveryPropertyDefinitions.ASYNC_TIMEOUT,
"1");
deliveryRequest.addProperty(CommonPropertyDefinitions.TIMEOUT,
"1");
Is there any workaround to set the time out on the smtp session using BI publisher java api?

Sorry, what I said was rubbish, because the LSMW and the session run in different external sessions.
I have searched forum for these terms: "company BUK parameter BDC background"
These threads Is it possible to set default company code in SM35? and Release BDC in SM35 in background, How to set defaul company code? seem promising, but I'm not sure they really solve.
In case these threads don't help you, I think you can create your own Z transaction which sets the BUK parameter id and then does a LEAVE TO TRANSACTION 'ABAON'. Then create again the recording on the Z transaction.
If you are using ECC6, then you may also enhance the standard to reset BUK parameter id at the very beginning of ABAON, in case it's run in batch input (sy-binpt = 'X'). Be careful as sometimes SAP does batch input on some transactions, so that could make the standard fail.
Last thing, you can contact SAP support, though it might probably be considered as consulting.

SNMP timeout from localhost

Hey guys,
I enabled SNMP to try to graph different things, and SNMP walk works but always times out after "hrSWRunPerfMem".
snmpwalk -v1 -c mycommunity localhost:
[snip]
HOST-RESOURCES-MIB::hrSWRunPerfMem.916 = INTEGER: 8656 KBytes
HOST-RESOURCES-MIB::hrSWRunPerfMem.926 = INTEGER: 4420 KBytes
HOST-RESOURCES-MIB::hrSWRunPerfMem.932 = INTEGER: 2800 KBytes
Timeout: No Response from localhost
After this error, I have to restart SNMP completely because it won't answer anymore. /var/log/snmpd.log shows nothing except the manual restarts.
I disabled almost everything except rocommunity and still get that error. There is no firewall enabled at all.
Any ideas?

Fixed by using net-snmp from Macports.

Cisco Switch TCL SMTP timeout

Hello I have some problem with cisco switch if i use SMTP event over TCL.
My TCl scrip contain code:
if [catch {smtp_send_email $mail_msg} result] {
error $result $errorInfo
#code for dump to file
} else {#code if all ok}
If internet is work script work fine. but if internet is down switch try send message long time and script "Process Forced Exit"
I have error
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: Process Forced Exit- MAXRUN timer expired.
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:     while executing
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: "error $result $errorInfo"
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:     invoked from within
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: "$slave eval $Contents"
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:     (procedure "eval_script" line 7)
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:     invoked from within
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: "eval_script slave $scriptname"
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:     invoked from within
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: "if {$security_level == 1} {       #untrusted script
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:      interp create -safe slave
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:      interp share {} stdin slave
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:      interp share {} stdout slave
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: ..."
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl:     (file "tmpsys:/lib/tcl/base.tcl" line 50)
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: Tcl policy execute failed:
Jul 12 23:35:10: %HA_EM-6-LOG: event.tcl: Process Forced Exit- MAXRUN timer expired.
I try change Maxrun timer but it not help (i have same error but it not print before time not end).
I try ios for switch 150-2.SE4 | 122-55.SE8 | 122-44.6
I try this code on cisco router, it work fine(if smtp server not avalable script print error 1-2sec).
Thank you.

If the mailer server is not listening on tcp/25 or otherwise refuses the connection, then the socket attempt should die quickly. If the mail server is truly unreachable, then the socket will never timeout until the EEM policy terminates. This holds true on the latest version of EEM on routers as well.

SMTP Timeout

hey guys,
have had a good look through the forums but did not find anything that helped.
basically have had the 10.4 server setup and working for over a year happily.
about once a day i have a look in the postfix mail queue and there is normally 1 or more messages that are stuck.
here is an example:
host mail.global.mas.att.com[207.46.51.86] said: 421 mail106-sin.bigfish.com Error: timeout exceeded (in reply to end of DATA command)
email to pretty much all servers gets there just fine. i don't use relaying through any isp, mail gets sent directly.
my question is can i change any settings that slows an upload down, i read that it might be something to do with the MTU so i have tried setting the mac to 1450 but no change as yet after a restart.
i know its only a few mail servers i have trouble connecting too, but still annoying for my users.
any help would be great!
regards,
tommy.
PowerMac G5 Mac OS X (10.4.9)

host mail.global.mas.att.com[207.46.51.86] said: 421
mail106-sin.bigfish.com Error: timeout exceeded (in
reply to end of DATA command)
my question is can i change any settings that slows
an upload down, i read that it might be something to
do with the MTU so i have tried setting the mac to
1450 but no change as yet after a restart.
Personally I would forget the mtu. I've not looked into it a lot but 421 seems to be generated by quite a few things beyond control of your end. It may be a greylisting (with bad error message) or just an over-busy or under-powered receiving server. Exchange servers seem to (or used to) have known problems with queues and generated 421 errors.
I would think the best course was to contact postmaster at the recipient domain (or @bigfish.com in the case of that particular error) and ask them if they can explain the error their server is giving you. After a couple of responses you might start seeing whether the problem is at your end or not.
-david

What is causing my SMTP timeout error?

When I send emails using thunderbird I am frequently getting the error message:
"sending of email message failed.
The message could not be sent because the connection to the SMTP server smtp.googlemail.com timed out. Try again or contact your system administrator"
I have tried disabling AVG antivirus and my windows firewall but that has not helped, I've even created exceptions to the firewall for thunderbird.
Any help would be appreciated.

To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Fixing the SMTP server of localhost

I have installed the role of the SMTP server in my VPS and it's okay as you see there is a red mark on.
screenshot : prntscr .com/46tup6
(remove the space in the link between the "r" and ".", my account is not verified to post links) i want to fix this problem and need tomake the SMTP working normal.
I think only can you can help me fix this hope you answer me soon!
Thanks,

Hi MalikMax,
Did you confirm your SMTP configuration completed? You can refer the following related third party article to complete your configuration first.
How to set up an Internal SMTP Service for Windows Server 2012 Essentials
http://blog.powerbiz.net.au/exchange/how-to-set-up-an-internal-smtp-service-for-windows-server-2012-essentials/
More about the IIS question please post to the IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
Hope this helps.
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites;
therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure
that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Create a java SMTP Server on localhost

URGENT !!!
Can Anybody here help me to find out the ways to create a SMTP server (usinf RFC 2821 )which can connect to any email client such as Outlook Express?...
thanks..

must stick to java implementation? why not trying one of those free smtp server avaiable?
i use 602 Lan Suite, simple enough

.mac mail smtp timeout?

is anyone else having issues sending mail with .mac in leopard? it constantly times out. it's fine in safari, and i can check mail just fine in mail.app, but the smtp servers are always timing out while sending from mail. any help would be greatly appreciated.

Remember you can use the "Helpful" and "Solved" buttons for each post. this helps people when searching see a thread that might be able to help them as well.
Glad i could help solve your problem

Started having "smtp timeout error" when sending e-mail, after installing Thunderbird update on 1.4.15 .How to undo the update?

Thank You!

has you anti virus vendor sent their update yet to fix the problem?
If not, turn off outgoing email scanning in your anti virus program.

Running a SMTP server on localhost?

hey there,
im using easyPHP to test my scripts on my local machine
before my site goes live. the problem is, i have no way of testing
if my email functions are working. does anyone know of a good
open-source mail server that i could install on my local machine
that will work with easyPHP; or another solution to the problem? My
local machine is running windows XP, so my local configuration is
WAMP, and my remote server is going to be a LAMP configuration. Any
help would be greatly apreciated! Thanks!

hey there,
im using easyPHP to test my scripts on my local machine
before my site goes live. the problem is, i have no way of testing
if my email functions are working. does anyone know of a good
open-source mail server that i could install on my local machine
that will work with easyPHP; or another solution to the problem? My
local machine is running windows XP, so my local configuration is
WAMP, and my remote server is going to be a LAMP configuration. Any
help would be greatly apreciated! Thanks!

SMTP timeout on localhost

Similar Messages

Maybe you are looking for