Smtp times out, problem with password

Hi! Can't get email to accept password & I know I have it right. Tried sending a test email to my pc, but smtp times out. Sure would appreciate any help! Thanks!
mac mini Mac OS X (10.4.7) 1st mac, got 6/6/07

Hi saver.
Are this mail account and the associated outgoing (SMTP) server provided by your ISP or by someone else?
Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
.Mac: Server timeout alert message when sending email

Similar Messages

Time-out problems with RV320 (after upgrade from RV042)

config:
dual wan
WAN1: 4G router (DHCP) - approx 25Mbit/ 8Mbit
WAN2: PPOE (DSL) - 1 Mbit/ 0.2 Mbit
worked with a RV042 before and upgraded to a RV320 now.
all other things are unchanged.
3 problems - 2 solved/ not critical - one still open:
a) not critical: DHCP Status does not include all devices (changing view - but all-time problem)
I would suspect a software bug.... DHCP itself works perfectly/ IPs are assigned (just not shown in status)
b) solved (at least for now): internet connection featured time-outs; after many tries, disabling the SPI in the firewall helped
btw: this only happend for the WAN1 - WAN2 worked (or is that slow that the additonal wait time did not matter ;-)
c) very annoying: exchange connection (from Outlook client to external exchange) still has time-outs (mostly the whole mail client hangs/ ends to be restarted).
As soon as I disable WAN1, it works! But it´s not the LTE WAN itself - switching back to the RV042 does not show the same symptom.
I tried: include IP into local DNS (in general I work with google DNS servers - but changing that does not help either), opening all traffic for teh realevant IPs and disabling the firewall completely. no positive results....
thanks for any hints....

I agree with you on a, probably a bug of some sort.
b is an issue I've seen before, and even on similar bandwidth (25/5) on my rv016. What was able to figure out is that the carrier (ISP) is sending about 4k/sec of ICMP packets to the router, which in turn makes the router think it's under attack so it drops the connection. As you can tell, disabling the SPI helps. For me, putting another router in front of my rv016 (on 2 of 3 wans) was my only 'permanent' solution.
c sounds like there's a protocol binding/static route in the rv042 that you need to add to the rv320. I'd check that first.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

OIM 9.1 Time-out problem with Design Console

If I leave the design console running for any length of time, making updates result in the following error:
17:36:52,578 ERROR [ACCOUNTMANAGEMENT] Class/Method: tcDataBase/getUser encounter some problems: Invalid user found: xelsysadm
java.lang.RuntimeException: Invalid user found: xelsysadm
at com.thortech.xl.server.tcDataBase.getUser(Unknown Source)
at com.thortech.xl.dataobj.tcSVP.isOperationAllowed(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.isUpdatePermissible(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPreUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcSVP.eventPreUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source) ...
Closing the Design Console and re-launching produces similar errors. I must stop and restart the JBOSS server to get access again. My environment is Windows 2003 with JBOSS and an 11g database.
Any help on what to look for would be appreciated.
KC

You are correct. If you pre-populate, it will be the requester. The requester would need to manually populate the field during the request with the requestee information. And there is only one form available. You can however, after submission of the request, get the request data, parse the Consolidated Request Data to determine the id's in the request field, and then return appropriate responses to trigger the tasks needed. This will still be a problem in the long run because you can't change the requestee information for each approval task. You're pretty much out of luck on this one.
-Kevin

Time out problem in BPS

BPS friends,
We have a planning function to copy Versions based with some filters. The copy function takes 5 hours and times out after that. The function is reaching max buffer size as recommended by SAP so we cant increase the buffer size anymore.
We are on BW-BPS 3.5.
How can I solve this time out problem? Please respond to me.

Hi Pat,
How many record did you copy ??
Could you restrict the copy in not 1 package ??
Package per package ...
I suggest you ..
e.g. you have restriction by a 0CALMONTH / something ..
Then,
You can copy e.g. for January to March, then March to August, etc.
You can automate it by planning sequence.
Hopefully it can help you a lot.
Regards,
Niel.
thanks for the points you choose to assign.

Does anyone have an answer yet to this time out thing with the Itunes 9????

I see so many threads but can't follow through each one. Does anyone have an answer to fix this?
dawniedoodle

What time out thing with iTunes 9? You'll get better answers if you give as much detail as possible when asking a question, including any error messages you've received and any trouble shooting steps you've already taken. From your question, it's not at all clear what your problem is.
Best of luck.

Leopard SMTP time out

Two different machines, two different ISPs. Symptom is that sending takes either a very long time (30 seconds for a plaintext test msg), or will not send; "cannot send using server... try later". If that message appears, and the user does nothing, the mail will eventually send. Per Connection Doctor, even when it indicates smtp connection successful, its log shows a Time Out message from it. Recent new computer, so from Tiger (all good) to Leopard (all not so), with exactly the same settings.
One of the machines is a new ATT.Yahoo mail dsl customer -- frequent connection failures, followed by success, the other is an existing Cinti dsl customer, few connection failures, but very long time to send.

Changing the DNS didn't fix my issue of smtp time outs. But if I open the mail.app connection doctor, click on the smtp server I want and click check again, it will find the server. Sometimes is takes a few times of clicking check again.
It's pretty annoying to have to do this a bunch of times per day when I want to send mail but it's less annoying than having the quit out of mail and restart it.
I talked to my mail server admin and he said he can see that on my end he can see a lot of disconnects so I think it is an issue with mail.app.
I wish I knew why it was doing this though.

Toshiba 48L1433DB - USB time out problems

My USB Ports are not shown on my Source list and I have a "time-out" problem.
If I put a stick in either USB port the media page loads automattically and everything works perfectly but then switches off after an hour or so (on-screen message shows empty port has switched on).
I then have to disconnect the stick and reload it before I can start watching again (Have to fast forward to place where disconnect happened but have to stop every now and then to prevent time out re-occuring)
Very puzzling

Originally Posted by [email protected]
My USB Ports are not shown on my Source list and I have a "time-out" problem.
If I put a stick in either USB port the media page loads automattically and everything works perfectly but then switches off after an hour or so (on-screen message shows empty port has switched on).
I then have to disconnect the stick and reload it before I can start watching again (Have to fast forward to place where disconnect happened but have to stop every now and then to prevent time out re-occuring)
Very puzzling
At first you should make sure, that it is not caused by the stick type and/or file format.
Did you check with a stick from another vendor ? Also, does it happen with every file type, or related to certain formats ?

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Error out problems with measuring frequency VI

I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
Attachments:
Measure Frequency VI error.vi ‏27 KB

This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Problems with passwords after upgrade to Mavericks

Hi,
After upgrading to Mavericks I have problems with passwords. MacOS allows me to log in with my password but when I want to install software it does not accept my password. I can go to the user tab in system preferences and change my passwort there. With the new password it works, but when I change to the old password, I have the same problems. Strange ...
Thanks for help

OK. I found the problem (probably it is not related to the upgrade): When I install an application and the installation procedure asked me for a password it switched the keybord driver to a language I only use infrequently. Since my original password contained special characters the change of the keyboard driver was the cause for my typing in a wrong password. When I tried changing the password I used "abc" and this worked since it did not contain any special characters. So everything explained and a bug for Apple to fix.

Time out problem while uploading large bpel processes into oracle soa suite

Hi everyone,
I'm using oracle soa suite 10.1.3.4.0 and I'm encountering time out problem while trying to upload a 5MB bpel process into my bpel process server located in the LAN network. The error is coming from apache common file upload.
Is there a way to increate the connection time out for oc4j to avoid this problem?
Thanks for any help.
Regards
Esfand

Hi Marc.
Thanks for your reply. I increased the transaction manager time-out but still I have the same problem. I believe this is something related to oc4j settings and related to upload bpel process. here is my stack trace output:
79: A problem occured while connecting to server "192.168.0.12" using port "8888": bpel_JazbModaresJadidBPEL_1.0.jar failed to deploy. Exception message is: javax.transaction.RollbackException: Timed out
at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:94)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:324)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.oc4j.rmi.OracleRemoteException: An exception occurred during transaction completion: ; nested exception is:
javax.transaction.RollbackException: Timed out
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:152)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
... 25 more
Caused by: javax.transaction.RollbackException: Timed out
at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:664)
at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:273)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:162)
at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:472)
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:137)
... 33 more
Total time: 4 minutes 30 seconds
The bpel jar file is about 2MB and is uploaded from my machine located in the same LAN.
Any hints?
Thanks
Esfand

Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

We're not Apple - these boards are user-to-user.
Your profile says 10.7.3 - try applying the 10.7.5 combo update.

Session time out problem

Hi guys
I am using WSAD 5.0. the problem that i am having is that i have a properties file where i give the session time out value along with many other things. and when a user logs in a servlet takes those values from the properties file and sets the session time out value, using session.setMaxInactiveInterval(). but the problem is the session is still maintained even after the stipulated inactive time. Can any one tell me what could be the problem.
Note: when i say session.getMaxInactiveInterval(), i get the value that i have set in the properties file.
Thanks

You're sure you specified seconds rather than milliseconds?
- Saish

Time out problem in background

Hi All,
I am facing a problem with a select query while running the report in background (found out while debugging) where as the same select query while running in fore ground works fine.It is getting timed out.If anyone has faced simillar problem can you please let me know the reason and the way to solve the problem without changing the code.
Thanks in advance.

Hi,
> Yes the internal table has records, actually the report was running for even 2 days and the stuck up point was this select query mentioned in the previous post.Ultimately the job has to be cancelled externaly.
but this is no timeout. If you canceled it manually there is no technical problem (besides the run time).
With stuck you mean that after 2 days it was (still / currently) executing this query, right?
In that case it looks like you have to do a performance analysis of the whole program execution. Check if you
can find anything that processes less data and runs faster. Take traces from this run.
Kind regards,
Hermann

Can't figure out problem with new PC

Hi all, I just built my first PC and everything's running pretty well with the exception of some lag and freezing. My mouse and keyboard sometimes lag behind my true movement. The mouse does this more often and will lag behind for a second before it catches up to my true movement. Also, the system has occasionally frozen with the image still on the screen (no blue screens). Finally, when trying to play music, the audio will skip out every 10 or 12 seconds. Otherwise, the system is working fine... I've been burning DVDs with it and programs run fine on it.
I'm thinking that it has something to do with the RAM. Here is what I've done so far: I have all the newest drivers from MSI and Sapphire. I've tried running the system with each of the 512MB modules by themselves. I've also tried putting them in different DIMM slots. Any features in the BIOS that may slow the system have been disabled. The system runs right around 37C for CPU and 42C for the system, so overheating is not an issue. The RAM isn't getting too hot because the system is slow right from a cold boot. I've done memtest and it has showed the RAM to be good. I also ran CPU-Z and the memory specs are below. Does anyone have suggestions as to the cause of these problems and how to fix them? Thanks in advance for the help!
CPU-Z memory specs:
CPU-Z version 1.22
Memory Modules Serial Presence Detect (SPD)
Module #1
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Kingston (7F98000000000000)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      K
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8
Module #2
General
Memory type      DDR-SDRAM
Manufacturer (ID)   Infineon (C1494E46494E454F)
Size         512 MBytes
Max bandwidth      PC3200 (200 MHz)
Part number      64D64320GU5B
Attributes
Number of banks      2
Data width      64 bits
Correction      None
Registered      no
Buffered      no
Timings table
Frequency (MHz)      133   166   200
CAS#         2.0   2.5   3.0
RAS# to CAS# delay   2   3   3
RAS# Precharge      2   3   3
TRAS#         6   7   8

I now have all my programs loaded back on and all the drivers loaded and still have no problems with lagging or audio skipping. I did not install any of the Promise drivers this time. All I installed was the via driver necessary for installing windows xp at the "F6" menu. I also did not install all of the MSI utilities, etc. this time. SO all I can think of is that the problem lied in the promise drivers or some of the MSI utilities. The PS is running all of my drives fine as of right now. Regardless, I'm up and running good, so I'm happy. I hope this helps someone else.
Also... has anyone had problems with the Realtek ethernet adapter? My comp. gives me a "network location no longer available" error every time I try to copy files over the network from my other computer. I haven't seen anyone else with this error or found how to fix it. I have file sharing enabled, the windows firewall is not on, TCP/IP is installed along with client for Microsoft networks. They're all in the same workgroup also. I can connect to the Internet and the connection seems to be set up properly. I think that covers everything I've checked...

Smtp times out, problem with password

Similar Messages

Maybe you are looking for