SMW01 E08 errors

Hi experts,
There is error in SMQ2 with Error in Mapping (Details: transaction SMW01).
Have checked in SMW01 and found E08 errors with error u2018Partner number 000000XXXXX is already assigned to a contact partner relationshipu2019
Any idea?
Cheers.

Hi,
Version is CRM 5.0
There is error in SMQ2 with SYSFAIL. With info "Error in Mapping (Details: transaction SMW01)".
Hence checked in SMW01 and found Bdoc with error u2018Partner number 000000XXXXX is already assigned to a contact partner relationshipu2019. The Bdoc state is E08.
Any idea?
Cheers.

Similar Messages

E08 error in BDoc

Hi,
We are trying to maintain relationships for a BP through adapter object "BUPA_REL".
When executed , there is error in SMQ2 with Error in Mapping (Details: transaction SMW01).
Have checked in SMW01 and found E08 errors with error u2018Partner number 000000XXXXX is already assigned to a contact partner relationshipu2019.
Can anyone suggest what needs to be done to fix this problem?
Thanks & Regards,
Shwetha.

Hi,
We are trying to maintain relationships for a BP through adapter object "CUSTOMER_REL".
When executed , there is error in SMQ2 with Error in Mapping (Details: transaction SMW01).
Have checked in SMW01 and found E08 errors with error u2018Partner number 000000XXXXX is already assigned to a contact partner relationshipu2019.
Can anyone suggest what needs to be done to fix this problem?
Thanks & Regards,
Shwetha.

Bdoc state E08 , Mapping Error , BUS_TRANS_MSG

SAP CRM
trx:- SMW01
Bdoc Error
Bdoc State --> E08
Bdoc state Descriptin --> Mapping Error
Bdoc Type --> BUS_TRANS_MSG
How to resolve this error

Hello Aup,
What is the BDoc Type you are talking about?
Click on Error/Receiver tab and check for the exact error message.
If you give me the details,I can help you solving this Mapping Error.
Thanks and Best Regards,
Shanthala Kudva.

Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Error while processing BDOC

Hi All,
I am facing an error while processing BDOC form the Tcode SMW01.The error messages coming are:
1).User M02M104# doesn't exist in the system and
2).Validation error occured :Module crm_bupa_main_val,Bdoc type Bupa_Main.
Every thing is maintained properly (i.e. Account Owner id,clerk_id).what should i do to process this BDOC.
Regards,
Amrit

Hi,
How did u resolve the error.
Thanks,
Best Regards,
Madhu

Error in Material Initial Load.

Hi Gurus,
I am replicating materials from ECC to SRM, but the BDOcs in SMW01 have errors, alhtough they appear succesful.
The error is: "Mat. for Initial Download: Table not supported by function - Message no. C_"
All the materials have been replicated, but what is missing are three custom fields that we need to replicate from ECC and for which we have made an enhancment.
This issue is happening in QAS, and in DEV everything went fine. We have checked and all the transports have been succesfully moved from DEV to QAS.
Please help.
thanks!
Edited by: Michele Camuri on Apr 8, 2009 12:02 AM

i had the same problem and the problem comes because of the following reason.
1) the product category corresponding to the material is not available (or) is still not replicated in the SRM system.
solution is a) check whether all the product categories are already replicated correctly in the SRM system , if not restart the replication of master data ( product category, unit of measure).
b) once the product category is available , then restart the inbound queue , so that the replication of the material is started again.

Mapping error while downloading the condition records (ECC to CRM)

Hello Experts,
We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
Error when carrying out delta download (Message class: CND_MAP)
I am a technical guy and dont have much idea in CRM Middleware.
I welcome your valuable thoughts and will award full points.
Regards,
Jeo

Hi,
As you mentioned i checked for the followings:
>>In Maintain field catalog:
I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
>>Create condition tables:
I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
Please suggest me, now what i need to do?
Regards,
Jeo
Edited by: Jeo Denson on Dec 1, 2011 4:11 PM

Error while replicating Material in SRM 7.

Hello,
I am facing the problem while replicating the material from backend system I have successfully replicated product categories and other.
BDoc failed while replicating the material from ECC system give me below message in SMW01 TCODE
"Mat. for Initial Download: Table not supported by function"
"Specify the relevant unit of length"
"Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT."
Do you have any idea regarding above issue.
best regards
vp

Note 872533 - FAQ: Middleware
Frage 5. Troubleshooting error messages
Examples for /SMW01 BDoc errors during the initial load or delta load:
E:SMW3 018 - Validation error occurred: Module &1, BDoc type &2.
E:SMW3 046 - No extended data for BDoc message &1 found.
E:SR 053 - &1 &2
E:COM_PRODUCT_API 003 - Category for product hierarchy & does not exist
E:COM_PRODUCT_UNIT003 - Specify the relevant unit of length (Entering the dimensions is mandatory since Note 29101).
You can solve the errors mentioned above by implementing the following notes:
Call transaction SE16, enter SMOFAPPL, and set entry EBP.
520227 - Set type CRMM_PR_TAX (implement manually!)
720819 - Consumer entries
428989 - Filtering irrelevant data (for example, Sales and Distribution) Example: see attachment mod.txt.
675101 - Execute report: COM_CATEGORY_TRANSPORT

Unknown Error - new to CRM - Contracts IDOC

hi guru's ,
my object is to load contract details to CRM .. so i have used LSMW with IDOC's...
I have Finished with LSMW ....
I tried to Load 6 documents... through the LSMW..... all the IDOC are in Status 53... and it say that its executed Successfully....
but when i see the Transaction. only the last document is seen..
I have checked SMW01 ( no error's )
I have check SM13( no update termination error's)
when I am loading a OPEN contract i should get.... a message saying that ( THE CONTRACT WILL BE REGISTERED... NOW I AM NOT GETTING the message)
Please do help me
Regards,
vj

Thanks for the feedback. With MobileMe being discontinued next June 30th and with it all websites this might be a good time to find another web host and new blog. There is an application out that can convert an iWeb blog into a WordPress blog. You can get more information about it from this tutorial:
No. 23 - Life After MobileMe
OT

Contact Person Replication Problem - Updating could not be completed

Dear Experts,
I'm facing the problem when replicating contact person from CRM to R/3. It only happen when changing the bp/contact person that paired (with contact person relation type) to more than 5 customer/bp and it always error when replicating to R/3.
If I trace the probelm in SMW01, the error message appreared is : Updating could not be completed. I'am affraid the workload in R/3 system is to high or the time that given for processing the BDOCS is too short.
Is there any configuration to set the time for processing the BDOCS from CRM?
Or is there any solution to solve this issue?
Please helps
Many thanks in advance.
Regards
eddhie k

Hi,
I am facing same problem, have u got the solution for this problem?
Thanks,
Harshal

ECC Product Hierarchy to CRM

Hi all,
We have a product hierarchy created in ECC in Tcode V/76. These hierarchies have 3 levels and assigned to different materail in ECC materail master.
We have done a initial load of Materail and all the products in CRM now have the R3PRODSTYP. But none of them got assigned to R3PRODHIER when I check in Product wokbench. This is making my product search in a Sales order really difficult.
Is it a standard behavior that R3PRODHIER does not get assigned automatically even though those materail belong to that hierarchy in ECC?
I cheked the SMW01, no errors in initial load of the objects "Material", "DNL_CUST_PROD01" etc.
Any help much appreciated.
Edited by: Praveen Rangineni on Aug 4, 2008 4:10 PM

Yes..That can be a possible approach. But the product maintenance workbench will not allow you to delete the base category with which the product was created.
Instead the best way is to use this recategorization trx. COMM_PROD_RECATEG to change the category assignment of all your products on the fly.
Please use this in TEST mode first and then go for it!
Thanks,
Sudipta.
Note: Unfortunately, the report cannot be executed to delete the assignment of a category to a product when that category is assigned to the base hierarchy.
In that case, a report program to reassign the base hierarchy would be 1 option. Alternatively, you need to purge your product data in CRM and restart the download from ECC after making the customizing change.
Edited by: Sudipta Sarma on Aug 5, 2008 1:00 AM

Inbound stuck queues

Hi guys,
There are a few inbound stuck queues in the CRM system with the error SYSFAIL.
When we checked in smw01 the error is"The transaction getting locked by the user"
When we manually activate the queues the queue gets processed out.
But we need to manaully go in every day to reprocess these queues .any idea of automatically reprocessing these stuck queueus.
Thanks,
Krishna

Hi Krishna,
You can reprocess those queues automatically, but again I would suggest the administrator should manually go and reprocess it as SAP standard don't recomment the autoprocess of the Queues/ BDocs, because this may lead to inconsistency.Again in the end decision is ours but SAP would never take responsibility if anything goes wrong as of SAP standard practice is not followed.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

SAP Currency code?

Dear all,
When I am going create and save export BP and check in SMW01.
the error comes
"For the ISO code USD there is no unique SAP currency code for ALE"
I put the currency USD and Country is Bangladesh in BP.
pls help me out
Regards
Jayesh

Hi!
Please check section 3.2.1 of the Best Practice Documentation for B09 to see if you have duplicate entries.
Extracted text:
Before starting the Customizing replication, verify that entries for the ISO codes are unique in the following ECC tables:
     Language keys (T002 field LAISO)
     Currency codes (TCURC field ISOCD)
     Countries (T005 field INTCA).
Although SAP delivers these tables in a consistent state, duplicate ISO entries can occur because this is not a key field in those tables (especially if own entries have been set up with copy functions).
Procedure
1.     Access the activity using one of the following navigation options:
Transaction code     SE16
SAP ECC menu     Tools  ABAP Workbench  Overview  Data Browser
2.     In the table name field enter T002.
3.     Choose Table Contents (Enter).
4.     Choose Execute (F8).
5.     Check the column LAISO for duplicate entries.
6.     Repeat these steps for the other tables.
If duplicate ISO codes are detected, they have to be replaced by new ISO codes. The final result has to be that all tables mentioned hold unique ISO code entries. Multiple entries with empty ISO codes are possible.
Duplicate entries cannot be deleted directly in transaction SE16. If you want to delete database records please get advice from experienced consultants or enter an SAP message.
BR
/fredric

Middleware -Tax number category

Hello Experts,
When we downloaded the customer master form R/3 to CRM, we are getting error BDocs in SMW01 with error " Tax number Category IN0 does not exist". How can I maintain Tax number category IN0 in CRM system?
I found the path for this as IMG> CAC>SAP BP>BP>Basic Settings>Tax Numbers> Maintain Tax Number Categories. But here when I try to create IN0 , it is not allowing me.
Kindly suggest me some solution.
thanks&regards,
kalyan

Dear Apoorva & Arun,
Thanks a lot for confirmation, I have done the same setting earlier and defined IN0 on DEV system and it was solved.
The same customising request I have transported to QA, and the Tax Number Category IN0 appears, but without the name description "India:VAT Registration Number".
Now in QA system, I have completed the download and all the customers were downloaded except few. But in SMW01 it is still showing Error Bdocs with that same single error " Tax Category IN0 does not exist" for that few customers.
When I have selected the error BDocs and try to reprocess it, this time it is showing "No authorisations to create partner in Role" but not the old IN0 error. I think it is an authorisation problem. But why the system is showing the error BDocs only for few customers thats too, even after the Tax Cat IN0 exists.
So, what will you suggest, can I go ahead with the same setting on PROD or any solutions from your side?
Thanks&regards,
kalyan

Error in Mapping (Details: transaction SMW01)

Hi,
I am tring to replicate materials to SRM.
I ran the transaction R3AS and given the load object as MATERIAL.
When i checked in SMQ2 i found an error.
The error is as follows.
"Error in Mapping (Details: transaction SMW01)"
Kindly help me in resolving this issue.
Feel free to contact me on +919886157678
Thanks and Regards,
Satish

As Jorge said check transaction SMW01.
Probably you'll see that some material group is missing, so you'll have to adapt your filters for that and replicate the material group (DNL_CUST_PROD1) using R3AS.
Regards,
Robin

SMW01 E08 errors

Similar Messages

Maybe you are looking for