Snap to Absolute Value doesn't work in Logic 9

I recently upgraded to Logic 9 and things have been good except that in my Piano Roll the "Snap to Absolute Value" setting stopped working for setting the ends of my notes. I migrated my settings over from Logic 8 and all my keys commands and preferences work perfectly so I am wondering if there is a new setting in Logic 9 I have to set to get the snap to work. When I try and lengthen notes whether I have "Snap to Absolute Value" set or not the resolution for changing the note length does not change and I can't get my note ends exactly where I want them. If I zoom in on the note ends and have "snap" on I can get the not ends to an absolute value, but I thought the point of the "Snap to Absolute Value" setting was that you didn't have to change your zoom to snap to absolute value. Any suggestions would be helpful.

Are you using a locale different from the default (En-US)? Can you check if the phone locale that was installed on the CUCM is compatible with the phone firmware? Can you try a higher phone firmware and higher locale which is compatible with that phone firmware?

Similar Messages

  • SoftKeyboardType property of StageText : some values doesn't work on Android

    Hello,
    on my Galaxy Nexus Android 4.2.2, when I use the softKeyboardType property of StageText :
    "number" and "email" work,
    but "punctuation", "url", and "contact" doesn't work.
    http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/flash/text/StageTe xt.html#softKeyboardType
    Why some values doesn't work ?
    I need the constant "punctuation", please help.
    Thanks

    Hi,
    Thank you for your bug report. We are able to reproduce the issue. Could you please open a new bug report on this over at bugbase.adobe.com?  Once the bug has been added would you mind posting back with the URL so that others affected can add their votes and comments?
    Thanks once again for reporting this.
    -Nimit

  • Parameter default value doesn't work in Discoverer Desktop 4i

    Hello,
    I have a parameter called 'Organization' in discoverer report.
    I want to set its default value to one organization from the list of values. I edited the parameter
    and selected that value from the list in the Default value field. But,when I run
    the report, it shows the recently used value for that parameter,
    instead of showing the default value.
    I have the same problem with all parametrs in workbooks in Discoverer.
    I am using Discoverer Desktop 4i (4.1.41.05.00).
    Is there anything i can do to make Discoverer show me the default value for the parameter every time i run the workbook?
    Thanks in advance!

    Thanks Rod!
    Unfortunately it seams that seting that p[reference doesn't work for my version of Discoverer.
    That option is introduced with version 4.1.43 and we are using version 4.1.41.05.
    I suppose i can't solve that problem on another way in this version of Discoverer Desktop..?
    Best regards!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Query property "Save and reuse variable value" doesn't work in BW EHP1

    We have a workbook which contain 4 queries, every different worksheet is a different query.
    All the queries are on the Same InfoCube and all the queries use the same variables.
    In the properties of the query n.2 we set the parameter "Save and reuse variable values" then we refresh the 1st query and all work fine (the system asks the variable values) but when we refresh the 2nd query the system doesn't use the same variable values that we have inserted for the query n.1
    We don't have the same problem in 7.0.
    Any help is appreciated.
    Luca

    Hi,
    I suppose, you need to set the 'Save and reuse variable values' for each query individually in the workbook. I am not sure however there is a option where you can specify to apply the settings of one query to all queries in the work book.
    Please check and hope it helps.
    Regards,
    Adarsh Mhatre

  • OBIEE 11g Prompt's default value doesn't work with a presentation variable

    Hi, I'm using OBIEE 11g and I have two dashboard prompts (Product Name and Product Number). Theses prompts are hierarquical, so the values that are displayed in the Product Number prompt have dependency with the values chosen on the Product Name prompt. This I was able to do, but now I want to put a default value on the Product Number prompt. The steps are:
    1 - The user chooses the value for the Product Name Prompt and by doing that the Product Number prompt is automatically filled with the correspondent value.
    But unfortunatelly this is not working, after choosing the value for the Product Name the default value for Product Number is not displayed (when you open the prompt the values displayed are correct and already filtered considering the Product Name but the prompt is not automatically filled with the default value).
    What I did is:
    On the Product Name Prompt I've created a Presentation Variable called PROD.
    On the Product Number Prompt I've selected:
    1 - For the "Choice List Values" field I've checked the option "Limit Values by All Prompts"
    2 - For the "Default Selection" field I've chosen the SQL Results option and enter the following SQL:
    SELECT "Products"."Product Number" FROM "Sample Sales Lite"."Products" WHERE "Products"."Product"='@{variables.PROD}
    What am I doing wrong?
    Thank you,
    Carla

    Sorry I was wrong in my previous thread.
    Actually your approach is not correct, Product Number choose constraint that will show as per the selection of Product Name.
    Coming to default value for Product Number you are going for sql override that is okay but not work with variable, instead of setting default values for product number set that to product name.
    if not you need to go for 2 different prompts
    Prompt 1 Product Name hit GO
    Prompt 2 will work based on as you defined earlier with variables
    Hope this helps

  • Crosstab with char values doesn't work

    I am using Template Builder for Word 5.6.2 to create a crosstab report. I need to create a crosstab table that has char values in the cells not numbers as is expected by the wizard. Because the sum command expectes a number it displays the NaN not a number error in the cell if I try to display a char value. I tried changing the sum to max in the cell:
    <?max ($G1[(./CRITERIA_ID=current()/CRITERIA_ID)]/THRESHOLD)?>
    but this gives an error.
    Is is possible to display a char value?

    I ran into a similar problem before and worked around it by moving the query to a pipelined function in the database as described at WITH clause unexpectedly causes ORA-00942 in Reports Builder
    Hope this helps.

  • FR 9.3.1 - Show point values doesn't work properly

    Greetings,
    I'm experiencing a strange trouble with the show point values function in charts like Bar, Line or Combo Chart types.
    The values diplayed are rounded to the nearest value, even if the grid show decimal values.
    I didn't find any solution to this, maybe anyone knows how to fix it?
    Thank you very much for your support.

    There is a work around, note that this is not supported/approved by Oracle as it involves actually changing the report xml. So at your own risk:
    # You need to export the FR reports;
    # Then open in a text editor;
    # Search for the current format (it should be '%,d', with the single quotes);
    # Replace with the format you want, for example to get one decimal place with 000's separator '%,8.1f'
    Formatting types/descriptions:
    bq. %g example 1234.456 \\ %f example 1234.46 \\ %,f example 1,234.46 \\ %d                example 1234 \\ %,d                example 1,234 \\ %8.1f                example 1234.5 \\ %08.1f           example 001234.5 \\ cost=$%,.1fM     example Cost=$1,234.5M
    To add this for the second Y axis, you actually need to do more work:
    # Within the exported .DES file, Search for &lt;CHARTOBJECT
    # Then search for OBJECT_WIDTH (There are OBJECT_WIDTH parameters for objects other than charts, which is why we start at the Chart section first.)
    # 1.Add the following parameters after OBJECT_WIDTH: \\          OTHERPROPERTIES=&rdquo;RightFormat=(FLOAT, '%,8.1f')&rdquo; \\          *** IMPORTANT: The %,8.1f is surrounded by single quotes;

  • Query Bex direct input filter value doesn't work

    Hi experts,
    when I use a bex report and direct insert a value in filter on the left; the report doesn't execute the request.
    For exemple I would like to filter a value in 0COSTCENTER; I inserted direct value on the filter cell and the report doesn't return the aspected value.
    How I can resolve this issue?
    The query is based on planning level.
    Thank you for any answers.
    Valerio

    Hi Leszek,
    At the left I digit a value for “Centro di Costo” (0COSTCENTER); for exemple I want to digit the value 8213-01 (or IT01/8213-01) and then 'enter'... The report does a refresh but then don’t execute the filter.
    The same procedure runs without error if I select the value from menu “select filter value”.

  • Query Designer - Hide Repeated Key Values - Doesn't work in the web

    Hello Experts,
    I'm facing a problem with a query. The user requested that he/she wants to see all the values of the key values.
    I already unchecked the option "Hide repeated key values" in query designer, but it still hiding it. I tested in BEx and it's working fine, but when I run it in the web the key values are being hidden.
    Anyone knows what is happening? I'm not using WAD and there is no possibility to use it.
    Thanks,
    Helder

    Hi,
    I have seen this problem - setting that option still does not show the repeated key values in web. You will indeed need to use WAD and uncheck that option in the properties of the analysis item. If you can't do that, the other option would be to do this change in the default web template (which is generally 0Analysis_pattern for BI WAD) but note that this will affect all queries.
    Also, please note that if the query is exported to excel, it will show the repeated values. This is the reason sometimes the users ask for key values to be repeated - maybe you would want to confirm that.

  • Why customer exit variable to grab the current month value doesn't work?

    In CMOD, input the following code to grab the current month value from the system date:
    Grab the month value with System Date
    WHEN 'CURMONTH'.
        CLEAR l_s_range.
        l_s_range-low = SY-DATUM+4(2).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
    In Query Designer, create a formula variable CURMONTH processed by customer exit and the dimension under the Currency/Unit tab is "Number".  Put the formular variable in the column as a KF.  When running the query, the column with the formular variable shows values of "2,0000000" other than just "2" I want for the current month.  If  the dimension under the Currency/Unit tab is "date", the column with the formular variable shows values of "00/00/0000".  Any idea?  How to grab the correct current month value which is 2 from the system date.
    Thanks!

    Oh ok , try the below options, As such I dont see any errors in our code .
    Not sure if you have ABAPER's in your team, just check with them once on the FM we are trying to see .
    Next , do you hvae 0CALDAY available in your report ? If so try to restrict that field with variable "0DAT" and write the same code you have written for your formula variable , but instead change the variable name to "0DAT" and try if this gets the month . let me know if I'm not clear .

  • Selecting filter value doesn't work

    Hi guys,
    I've a random problem on some bex query when I try to slect filter value on navigable info object of the query.
    The problem is that I can't select filter value because of the message:
    <b><Install error> Missing ActiveX component: Business Expolrer Selektor</b>
    Have you never had this kind of problem? Somebody knows how i can solve it.
    Thank you,
    Marco

    See the below discussion forum
    Error when starting Bex analyzer
    Hope it will be useful.
    Regs
    Gopi
    Assign points if it helps ..
    Message was edited by: Gopi

  • FW1884 EQ section doesn't work with Logic

    Hello all,
    I'm having a problem getting the eq section to work on my tascam fw-1884. As far as I know I've followed the instructions in de manuals. I've inserted a channel EQ and then... nothing. Normally it should be possible to select a band and control freq., gain and Q.
    As I look in the preferences -> controller assignments I can see that the controllers and buttons are recognised (not broken). But I don't know how to set it up to get it working.
    Is there anyone that has experience with this? Or know what settings I have to change?
    G5 2x2GHz   Mac OS X (10.4.4)  

    In logic Preferences - Control Surfaces - Reset Defaults.
    Again using the 1884 Manager I would also make sure you're in Native mode.
    If none of that works you can find the control assigments window in that same preferences menu.

  • MachFive Doesn't work on Logic 7.2.1

    Has anybody an expirience with this? It always get freeze when I play a song that had already a machfive instrument.

    i dont get it, is there a fix for the way the VI s in logic lose sound? the other question about using mach5 in logic and logics VIs in performer i assumed that neither company wanted the others co. to use their software,but maybe there is a way to use them with each other unbeknownst to me.

  • How to hide a field based on the value of a field in a different subform - null check doesn't work!

    I'm using Javascript to set the actions. I need to hide a text field if the value of a field in another sub-form is null.
    - tried checking the value of the other field for null - doesn't work
    - tried setting a variable str2 where I know the value of the other field is available then checking that variable when I initialize the text field - doesn't work
    What am I missing?

    Hi.
    Try this in the originating sub form referring to the text field (X). 
    if (this.rawValue = 1)
              X.presence = "visible";
    else if (this.rawValue = null)
              X.presence = "hidden";

  • Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work

    I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
    So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
    Or the fans don't support sensor readings?
    Thanks!

    Quote from: Jack on 13-October-10, 00:15:36
    Well, there is nothing that can be done about.  SysFAN 1 & 4 support sensor readings,  #2,#3 and #5 don't.  You can also see that in BIOS Setup.  #1&#4 are the only ones that show up there (H/W Monitor section).  This is not a malfunction or a bug.  You have to live with no fan sensor readings or be creative about the wiring.
    The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
    http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
    Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
    What is wrong?

Maybe you are looking for