Snap to beat markers: I'm using iMovie 11. Trying to prepare short movie of holiday using 2 or 3 songs and snap to beat feature. It worked great for first segment/song but I can't seem to get it to work for the second song. Help please.
I'm using iMovie to prepare a short holiday video. Snap to beat markers worked great for the first song but doesn't seem to work when I try to extend my project with a second song and more video and stills. I dragged in the song and marked the beats but when I bring in stils and video clips they just ignore the beat markers. Can anyone help please. Thanks.
I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
Thanks for any help on this.
Similar Messages
-
How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone
Steve,
I appreciate your answer. While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change. Yes, it might work. The "might" is the part that makes me hesitate.
Is anyone else out there on OS 10.7 and running Acrobat 9 Pro? Any issues with anyone else?
Thanks Steve. I do appreciate your offering a solution. I may end up trying it if nothing else comes together.
Mark -
I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?
Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
boot method: static
IP address: the address you chose in 7)
mask: 255.255.255.0
gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
click +
in the add menu click IP
enter your IP (from step 7)
make sure the Protocol is IPP
Name the printer and set its location
Go to Use field, in the pull down menu select "Select Software"
Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
Click +
Select your printer
Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done. -
I've succssefully entered my fingerprint into my new 5S, but I can't get the phone to "accept" it; it keeps asking for my passcode. When I put my finger on the Home button, it does nothing. How do I switch from passcode to fingerprint?
Many thanks.Make sure you have set Settings > General > Passcode & Fingerprint > Fingerprints > Passcode Unlock = "On".
If you like, also set Settings > General > Passcode & Fingerprint > Fingerprints > iTunes & App Store = "On". -
I am struggling to Partition my MacBook Pro using Bootcamp 5, can someone help, please. I previously had successfully loaded Windows 7 running Bootcamp 4 on the same machine. When I upgraded to Windows 8 I started encountering problems. My trackpad would not work and it required me to load Bootcamp 5" as I was running 32 bit this is not supported by Bootcamp 5 I had to completely delete the previous partition, but now I can't repartition as it goes halfway and says an error has been encountered and Bootcamp cannot partition this drive.
I do not know how to defragment the drive in Apple as I can in windows nor can I clean it up to maybe get everything in neat clusters, maybe somebody can help me solve this problem.Sorry Bobthefisherman, this was not helpful. I had already gone through these pages before coming to you. What I have discovered however is that when Bootcamp Assistant deleted the partition, it did not create a single volume but created three partitions instead which maybe the reason why it cannot create the new part ion parameters I am asking it crate. So I took it to the geniuses at Apple who suggested that I reformat the drive and reload everything again! and this might solve the problem. We'll all know whether this is helpful once it finishes the formatting of the hard drive. This process is taking a very long time to complete so I am leaving it overnight for it to complete. I will keep you updated on progress. I am also told that Apple is struggling with Windows 8 drivers and I may not be able to use that, so I am going back to Windows 7 even though I was beginning to like windows 8 very much.
-
I am attempting to transfer my contacts from my Android phone to a new Lenovo Yoga 2 computer via the intouch app and I can't seem to get it to work.
Maybe I'm not understanding but it appears that your question refers to a transfer from a non-Apple phone to a non-Apple computer. If that is correct, this forum is likely not the best place to get an informed answer.
-
I can't seem to get AirPlay to work on my iPad's, it works fine on my iPhone 5's on the same network, any suggestions?
http://whirlpool.net.au/wiki/three_email
Have you tried contacting your ISP for support? Can you confirm that the email is suppose to be over Port 110 and not 143, or 995/993? -
Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?
Just noticed the same problem. I was able to do it before updating. Hope there's a simple answer. That is a big reason why I got the iPad and iBooks.
-
How can I change my security questions for my Apple ID. I can't seem to get the questions correct at the moment
The Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contact Apple support.
c. Rescue email address and how to reset Apple ID security questions. -
Hello please can you tell me how to set up AirPlay as I can't seem to get it to work!
HI I've recently brought a Apple TV tired to set it up yesterday to watch cartonn hd but can't seem to get it to play on my TV am I doing something wrong?
aany help gratefully receivedHello Pepsimax1972,
Thank you for using Apple Support Communities.
I see you are having difficulties in getting your Apple TV to play on your TV. The following article provides some basic troubleshooting steps to help you sort out what might be going on.
Apple TV: Basic troubleshooting - Apple Support
Regards,
Jeff D. -
Hello all!
I got a new hard drive for my Mac Book Pro and an enclosure so I could clone the old partitions on to the new drive.
So I...
Put the new hard drive in the enclosure.
Booted up off an install disk and ran disk utility.
Copied the Mac and Bootcamp partitions over to the new drive that was connected VIA USB.
Turned off the computer, took the old hard drive out and put it in the enclosure.
Put the new hard drive in the Mac Book Pro.
Booted into Mac OSX with no problem.
When I rebooted held down the option key to boot into the windows side, it didn't show up as an option.
When I went back into the Mac side, I loaded Disk Utility and saw that I had the Mac partition, the BOOTCAMP partition, and a bunch of unallocated space. When I went into the System Preferences and set the target boot drive to the BOOTCAMP partition and restarted, I got some crazy error about there not being any bootable info on it.
That's where I am at. I have found other posts with people who are having the same problem, but I have yet to find a solution that doesn't involve me buying some 3rd party software. I know it has something to do with (what is called in Microsoft world) the Master Boot Record, but I don't know how to modify that to reflect that the BOOTCAMP partition is a bootable logical drive. I remember in MS DOS land there was some command line FDSK /something command that you would run (I think it was /MBR) to reset the MBR. To me though, all of these terms are shadowy figures in the Ether.
What do I do???
-Ricardo
p.s. I read somewhere to boot off the windows 7 disk and run the system repair tools. I tried that and no change.I got it. It CAN be done. At least on 10.6
How I made it happen (for free) on Snow Leopard:
1) partition, dupe etc all that jazz that you know. Make the mac side work, which it seems we've all been able to do no issues. I used SuperDuper! It worked just fine. (Had it on a disk. I assume you could use any other free way of doing this.)
2) New hard drive running, I used bootcamp assistant to partition the new drive for a new Bootcamp. I don't know if it's necessary to make the new partition this way for some reason, but it's what the process ultimately included, so maybe try without, but it worked with.
3) Natively running original drive on the windows side. Used DirveImage XML to clone windows partition onto new drive connected externally.
4) Back on new hard drive running natively. (Sorry for all the switching.) You'll note that the new Bootcamp partition is NOT bootable at this point. It won't come up in the usual 'alt on startup' boot menu.
Download rEFInd and install on mac side. Technically this is freeware or w/e, but for the love of god, throw money at this man. He totally deserves it.
5) Restarting the computer, rEFInd's boot manager finally recognizes windows. But you'll find windows is a little messed up and still won't quite boot. Get out your Windows CD and pop it in. Do the 'alt boot' thing. Your boot menu options are now "EFI Manager," "Bootcamp," and "Windows Disk." Or some such. Holy Crap! It recognizes Windows!
6) Boot to the CD and tell it to repair the windows volume. It will. My computer also had to do a disk check next time I booted to Windows, which took for-stupid-ever, but eventually worked. (I went to bed in between.)
7) Everything is running smoothly. Plus, you get the rEFInd boot manager, which is also great.
Deets: I have a late 2010 MBP 13". Snow leopard/Windows 7 32-bit (long story) Moved from original 320GB seagate momentus to new 750GB Seagate Momentus XT.
Feel free to share/copy&paste this solution as you see useful. Cheers! -
I have the iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to do it, any suggestions??
Make sure you have selected to sync your entire library, or have checked the songs you want to sync. This might help: http://support.apple.com/kb/ht1351
-
I'm just setting up my iMac, and am not very familiar as I'm just coming over from Windows. Working on setting up my recordeing software (will most likely be Audition) and I need to be able to record from the internet as well as from a microphone.
I've installed soundflower but now the micropohone is not working in facetime. What is the proper way to set all this up?
Thank you!
FrankO.K. fgonoz98
I would do 1 thing at a time:"now the micropohone is not working in facetime"
Here is what you can check to get your mike working in facetime:
1. Hold down option while you click on the speaker next to time a. date,
under input Device see if your mic is marked. If not: ✔️
2. Click the apple top left/System Prefs./click on the Sound speaker:
under Input highlight microphone.
3. When you have factime on go to video above scroll and see if your mic is marked ✔️
If that does not get it to work there is more you can check:
(Utilities/Audio, midi setup)
For any other audio device you do this for input and output.
If you get stock post back -
i need help,
i have backed my iphone 4 to my new imac itunes,
i have transfered all contacts and photos but my apps wont go to my new iphone 5 , cant find the sync button??????In iTunes, when you select your phone, you should see a tab for Apps. Check the Sync Apps box on that page. If you don't have many apps, you can also download directly to your phone by opening the App Store, tap Updates, and then Purchased (at top of screen).
-
Can't seem to get VPN to work ... how difficult can it be?
Okay. I'm a Mac IT professional, but have never had the need to do VPN for a client until now. The client has a Mac Pro server running 10.5.6 Server Unlimited. The router is a brand-new Apple Airport Extreme base station doing DHCP and NAT from 10.0.0.2 to 10.0.0.200. The server is set to 10.0.0.250 and the base station is forwarding all inbound traffic to the server at 10.0.0.250 (DMZ). Access from the outside for AFP, ScreenSharing, Server Admin, Workgroup Manager, etc -- all working.
The server has a domain name of "server.client.com" and the server is running Open Directory, Kerberos is running, and all DNS info seems correct.
When I turned on VPN, I enabled L2TP over IPsec and entered 10.0.0.201 as the beginning address and 10.0.0.210 as the ending address since they are out of the DHCP scope of the Airport Base Station. I also tried 10.0.1.201 to 10.0.1.210. I have PPP Authentication set to MS-CHAPv2 and on my client computer (MacBook Pro running 10.5.6) I configured the client authentication to "password". I've confirmed that I'm entering the correct password, and I've also tried Kerberos authentication. I will point out, however, that when I open Kerberos Utility on my client workstation, it is unable to get a Kerberos ticket from the server. Not sure why. I know I've typed the "shared secret" correctly on both computers because I'm just using a simple word for now while configuring and testing the service.
I've tried turning off the firewall just to be sure that it's not blocking my connection.
When I look at the Overview tab for VPN, it shows that L2TP is running. When I look at the log for VPN service on the server, it doesn't show anything.
Apple's tech specs on the base station in question list compatibility for VPN with the following info "NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels)"
Does the server need to be running DHCP in order for VPN to work? And if so, can I continue to have the Airport Base Station do DHCP if the server is doing it? If the server needs to run DHCP, I'd prefer to have it run DHCP just for the VPN clients and not the rest of the network.
Am I missing something?Does your server have only one interface?
I've never seen the VPN software work in this configuration. Usually you have one public interface (where VPN clients connect to) and a separate internal interface (where the secured systems are).
I don't know if it's possible to run in this way given that all incoming VPN connections will appear to come from a LAN address (thanks to the NAT router), and you wouldn't normally have a LAN client connect via VPN to the server to talk to devices on the same LAN.
Apple's tech specs on the base station in question list compatibility for VPN with the following info "NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6 (6to4 and manual tunnels)"
That doesn't matter - it relates to OUTgoing connections from clients on the LAN to remote VPN servers, not incoming connections.
The other place to look is in the router - make sure the relevant ports are being forwarded to the server. If all ports are (as you say) then this might not be an issue (although I seriously question the sanity of running your network this way).
You should also run a tcpdump on the server looking for traffic from the client. That will tell you whether the connection is even getting to the server.
Maybe you are looking for
-
Dear All I am facing a problem, the cumulative balances which are being pulled to my ODS - 0FIGL_O10 are coming wrong. I am using new GL. I checked the table FAGLFLEXT and i find that the cumulative balance is being overwritten by any new transaction
-
MacBook Pro started running slow
Hi. My mac started to work slowly yesterday. Mac info: MBP Mid 2012, OS X 10.9.2, 16Gb RAM, 500Gb (118Gb free) HDD It both boots slowly, and have frequent short freezes (either short lag for the active program or longer full-system lag with spinning
-
Hi experts, I use P_ABAP in payroll report, COARS value is "1". I met a case that an employee was in personal area "0001" from 2007.04.01 to 2007.05.31. Since 2007.06.01 he has been in in personal area "0002'. I run payroll report to query his payr
-
How to set up smart folder in icloud mail
can you get smart folders on icloud mail macpro 10.6.8
-
Hello all, In the new page i'm creating, i have more than 8 tables which i need to use to display the data in the page. Also when i'm trying to save the page, the data is saved using the seeded API's. In this situation, 1) How to use Entity objects f