Snap to point on scrollbar

As of iTunes 10, I have noticed my scrollbar no longer snaps to the point I click on. I have to drag the indicator to the point I am looking for. I'm refering to my music catalogue and in the view as "album list" and sorted by artist. Anyone else have this issue? I really liked being able to snap to a point when looking for artists and radio station links.

Update to this issue:
After the recent 10.6.1 update the scrollbar will snap to any point but, unlike Safari (and every other app), you have to click AND move the cursor at least slightly to initiate the snap to. Weird but I'm glad to have this function again.

Similar Messages

Moving xy graph cursor with mouse and programmably controlling snap to point

Hi,
I have run into a bit of a problem. I am trying to create a program which allows a user to select a location on an XY graph by simply clicking in the vacinity of the plot. Most of it is working, however I find that I can't programmably control the snap to point function reliably.
I hope this is a clear outline of the problem:
- The cursor starts in a Free state, so that when the
user clicks in the plot area, I can set the cursor
position to the nearest point by setting the
CursorPosition using the graph's property node.
- Maybe the user didn't like the chosen location and
wants to drag the cursor over a bit. Ok, user drags
the cursor to a new position.
- Now th
e cursor position is probably not exactly on
the plot trace. If, at this point, I set the cursor
to Snap To Point, the cursor does not snap to the
nearest point on the graph (relative to its current
position), but instead to the last place a _mouse_
action placed it.
- Immediately after the new location has been set,
the cursor state has to be reset to free in case I
need to programmably move the cursor again (I
can't seem to programmably control the mouse in
any state but Free)
How do I go about getting the cursor to snap to the closest point at it's new location? I'm at a loss.
Any insight you might have would be greatly appreciated.
Thanks much!
Tere

So what is the question about... I have to use XY graph in my program. It is used in Loop while cycle. It shows the statistic of a variable. I am using cursors in this graph to check the actual value of a variable in different period of time. But there are 7 variables and it is extremely hard for user to check each value independently. So I tried to make them moving on the X axis (TIME) together using the property node (cursors reading the position (only X axis, Y axis status lock to plot) of the major cursor and follow it... Everything looks great? But it did not work when I am trying to move the major cursor manually on graph... It works only when I am using the cursor movement buttons... But they work very slowly when there is a lot of data in graph.
I want to find out is it possible to make seven coursers mouthing together By the X axe and be Locked each at its plot by Y axe manually (Using mouse moving on a graph). Is it possible? If it is than how to do it?

Problem w/ snapping. AI CS6 is snapping to points (intersects and such) even though Snapping is Off.

I have turne off Snap to Grid, and Snap to Point.. and I have made sure "Align New Objects To Pixel Grid" under the Transform menu is turned off, yet still my objects are snapping to point intersects... am I missing something? Thanks!

You are welcome, Christ-Guard.
Some find them less smart, but they can be your friends.

Illustrator is snapping to point without the option selected.

Illustrator is snapping to point without the option selected. Anyone else noticing this and what is the solution. Yes I have restarted illustrator.

slange,
Then it may be time for the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Snap to point cursor: How do I determine which axes?

I have a graph displaying multiple plots.
Some of the plots use the lower-x and left-y axes.
Others use the upper-x and right-y axes.
I use a cursor in snap-to-point mode to select a data point on the plot and display an annotation that indicates the x and y value of the selected point.
How do I determine which pair of xy axes are associated with the plot the cursor has snapped to?
If I knew this I could use SetCursorAttribute(....) to set ATTR_CURSOR_XAXIS and ATTR_CURSOR_XAXIS to the appropriate value.
Thanks,
Kirk
Using Labwindows/CVI 2009
Solved!
Go to Solution.

You can obtain this by using:
GetGraphCursorIndex (panelHandle, controlID, cursorID, &plothandle, &index);
GetPlotAttribute (panelHandle, controlID, plotHandle, ATTR_PLOT_XAXIS, &axis);
You can compare 'axis' variable value with VAL_BOTTOM_XAXIS and VAL_TOP_XAXIS constants to determine X-axis of the plot.
The corresponding ATTR_PLOT_YAXIS attribute and VAL_RIGHT_YAXIS, VAL_LEFT_YAXIS constants help you determining the Y axis to which the plot is associated.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Snap to point

Hello,
I don't know how to snap objects. Of course I have enabled snap to point and show center options. The thing is that
it seems to work, but it isn't something I would call really snap to point. It doesn't find centers, and f.ex. I cannot snap guidelines
to let's say first point of the stroke. More, the intelligent guidelines only disturb, because they never find the closest object.
I am used to AutoCAD and this behaviour in Illustrator drives me absolutely mad.
is there any way to solve this problem?
Regards,
W.A.

Turn on your smart guides(view >> smart guides), snapping will be will be much easier. You can change your snapping tolerance to a larger number, and items will snap from farther away. 4pts is usually pretty good, but if you are working on large scale graphics making that number larger would work better.

Snap to Point problems

Illustrator CS6:
I feel a bit of a fraud even asking this, as it seems so basic – but I am having trouble "snapping" one object to another.
I can get objects to snap to ruler guides fine, but not other objects.
Can anyone help?

There are three snapping options in the View menu: Smart Guides, Snap to Grid, and Snap to Point.
When the Smart Guides are on with the default options in the preferences, you can snap align the bounding box of the object being dragged to the bounding boxes of other objects by dragging the object from any point on its fill or path. Smart Guides will show the alignment lines and also intersection lines when two sides of the bounding boxes of the dragged and target objects coincide and also when the center points coincide.
If you hold the Ctrl key down while dragging, the Smart Guides will also snap the point under the cursor which doesn't have to be an anchor point but any point on the object's fill or path to a path or anchor point of another object and will display a label indicating if it is the anchor point or path being snapped to. If you are not dragging a whole object but segment/s you don't have to hold the Ctrl key - it will snap to paths and points.
Wen Snap to Grid is on, the Smart Guides if on are automatically turned off. When dragging whole objects, Snap to Grid snaps first straight lines if any to the nearest line on the gird and if there are no straight lines it snaps the nearest point of the object to the nearest point on the grid. There is no visual feedback with labels or cursor changes for eventual snapping because it always snaps to the nearest intersection of the grid.
Snap to Point can be on when one of the previous two options is on. It will snap the point under the cursor which like the Smart Guides could be also any point on the object's fill, to the anchor points of other objects and it will indicate this by changing the cursor to white.
Snap to Point compliments the Smart Guides by making the cursor white when snapping to a point and you don't have to hold Ctrl when dragging whole objects to snap to a point.
With Snap to Grid on, Snap to Point has a priority and the point under the cursor will snap to a point of another object instead to the grid.
Also have in mind that another level of snapping is added by using Snap to Pixel Grid feature available when creating a new document and from the Transform panel. It deals with anti-aliasing, it is object based, and will have a priority over all of the other snapping options

One more question about "snap to" points in audio objects

sorry, one more question people.............. is there a way to set a "snap to" point in an audio region? Can I have logic set a point, or an "anchor" within an audio region that would coincide with the cursor. Once I get the cursor to a bar or a beat, is there a command that would allow a "snap to" point to be created in an audio object? That way I could clean up any "noise" or "chatter" at the beginning of an audio bounce or any audio object, and still have no problem pasting it all over my arrangement. I'm sure it's in here somewhere, but can't find it in the manual..
thanks again!!!

The anchor point in an audio region can be moved to wherever you want it to be. Let's say you recorded a loud piano bass note and afterwards you trimmed the file so that the attack of this sound happens right at the beginning of the audio region. Your anchor point will now coincide with the begnning of that region. This means that you can place that audio at, say, bar 37 and it's guaranteed that the attack of that sound will play exactly at bar 37. In this case anchor point = position of audio region in the Arrange Window.
Even though you haven't played a MIDI note into the song in order to place this audio region, an "event" is generated for this sound which can be viewed in a special version of the Event Editor which shows the position of all audio regions in the arrangement. Access this by simply clicking on a blank area of the Arrange window and then opening the Event Editor.
So let's say this sound is positioned at bar 37. Open the Event Editor (as described above) and you'll see an event at 37 1 1 1 and the name of that audio region to its right. In this case, the event's position = the start of the sound file = the position of the anchor within that sound file. If you changed the position of that event to 38, or 109, or 3, that audio region will be "triggered" at any of those positions. That sound will always "attack" on a downbeat.
Now let's say you reversed that pinao note in order to create a dramatic swell into a section of your song. (Open the sample editor and use the Reverse function). At this point, the anchor point is still positioned at the beginning of the file! Play back the sequence (from our bar 37) and the audio will play back from bar 37, only backwards this time; the peak of that piano note will be at some point later than 37.
So let's say you wanted to position this sound so that it hits exactly on the downbeat of bar 37. How do you do it? Well, you could always slide the audio file in the Arrange Window and try to line up the attack of the audio waveform with the downbeat of bar 37, but there's an easier way...
Open the sample editor and move the anchor point to the end of the file, coinciding with the peak of the waveform (the piano's attack is now at the end because we reversed the audio). Next, close the sample editor window, click on a blank area in the Arrange Window and open the Event Editor. You'll see that this audio region is still positioned at bar 37, but the actual beginning of the sound file now starts before bar 37. Now when you play back, Logic will start playing that sound file before bar 37, but the audio's peak will be lined up at bar 37.

Mouse cursor snaps to point on screen

I posted this two days ago in the Mac Pro forum, but after searching for a solution since then, I've come to two conclusions: 1) the problem is not a hardware one and 2) using OS X without a mouse is horrendous. Forgive me for copying and editing my own original postings. First, here is a digest:
- the cursor snaps back to its starting point on the screen after ca. 1/2 sec of movement, I can hardly move the cursor to halfway the screen before it snaps back
- not a hardware problem, appears with Kensington Expert Trackball, Magic Trackpad, Apple Magic Mouse and keyboard used as mouse
- not connected with a single user account, appears in the login screen, main user account and system operator account
- the snap-to position differs in the login screen and user accounts
- turning of the computer, unplugging does not work
- resetting PRAM does not work
- unplugging + replugging trackball USB-cable does not work
- the problem appeared suddenly in mid of normal use.I had not changed in settings before the problem
Any ideas? Is it possible to contact someone at Apple directly?
Below my original messages:
I started having a strange problem with the mouse cursor. I started the computer, the mouse worked fine as always. Suddenly the cursor started fixating on a point on the lower right portion of the screen. I would move the cursor, it would move maybe halfway across the screen for a split second and then snap right back to the starting position.
I tried shutting down the computer and restarting. Didn't help. The cursor behaves the same way in the login screen too. The only difference is that now the "homing position" is somewhere in the upper right part of the screen.
I have a Kensington Expert trackball and a Magic Trackpad. I've removed the trackpad, in case it had started interfering with the trackball (never done that before though). Didn't help. I've unplugged and replugged the trackball USB-cable, no help.
I had the Mac Pro unplugged for over a day as I was travelling and the Kensington Expert Mouse too. Behaved exactly the same when I switched on the computer again. I tried resetting the PRAM. Didn't help.
I don't know where the problem lies. The mouse cursor keeps snapping to a position in both the login screen and my user screen. The snap-back position is different in the different screens. The cursor returns to its position when both the Magic Trackpad and the Expert Mouse are connected or when only one of them is. I can move the cursor half a screen, then it snaps back. Clicking functions, but I never have any time to click anything when the cursor bounces back to its spot.
My final remedy would be reinstalling Snow Leopard, but before I try that I would like tro try something less radical. I would also delete the mouse .plist file, but I don't know where it is. I guess that probably would not help, as the cursor behaves crazy even in the login screen, so the user setting should not be the problem.
I've come to the conclusion, that the problem is not a hardware one. The mouse cursor snaps to point on the screen when I use: 1) a Kensington Expert Mouse, 2) a Magic Trackpad, 3) the Magic Mouse that arrived with my computer and when I turned on 4) use keyboard as mouse. The problem also is not tied to a certain user because it appears 1) in the login screen, 2) my user account and 3) the sysop account. I can't figure out where to look for the problem or fix it.

I give up.
I've tried everything I can think of, to fix the behavior of the mouse cursor. I've zapped the pram, I've fixed file permissions, I've removed all startup items, I've tried starting the computer in Safe Mode. No can do.
The mouse cursor snaps back to a position on the screen when I try to move it. This happens within a second, so I might be able to move the cursor half-way across the screen, but that's it. It doesn't matter how fast I move the mouse. The cursor is dysfunctional in the normal user account, the administrator account and in the login screen. It works perfectly fine in Safe Mode.
The mouse cursor misbehaves when using a USB track-ball, the Magic Trackpad or the keyboard with accessibility settings.
After advise received at this site, I tried booting up in Safe Mode and after that the cursor worked for a month or so, but the problem returned. I see no rhyme or reason why the problem appeared for the first place, or why it reappeared. I had originally had two pointing devices the track-ball and the Trackpad connected to my Mac Pro at the same time. After the problem first appeared, I removed the Trackpad. I returned it to use a day before the problem reappeared, but I don't know if that is the cause of the problem. The computer had worked perfectly fine for some months with two pointing devices before the problem appeared.
I've noticed that some other people have had the same problem. One had a feline related fix, which doesn't help me since I don't have a cat. Another fixed the problem by switching off the Internet, but that didn't help me.
What I now would like is to make an official bug-report, so that the problem could be fixed someday. I hope Apple is listening. I also plan to reinstall Snow Leopard (I have 10.6.7) next weekend. I had hoped to install a new OS only when Lion got out, but I don't seem to have much choice not. I can either simply reinstall or make a clean reinstall by erasing the disk in the process. I'd like to avoid reinstalling my programs, but I feel it is safer to wipe everything and start from scratch. Even then, I have no assurance this doesn't happen again.

How can I snap anchor points to grid?

I am trying to snap anchor points to the grid so I don't have to eye-ball the curves. Is there a way that I can do this?

Luke,
How about View>Snap to Grid?

Can I snap path point to other path point like Illustrator?

Hello. I am using AE cs6 win version.
Now I am trying to make precise square shape using pen tool.
And I have a question.Can I snap path point to other path point in AE like Illustrator?
Or Can I align them like Illustrator's align tool?
I use grid snap to make a precise shape, but If I can snap to other path point, it will be much easier to make shapes and to make animation.Do you know how? Or if it's impossible, how to make precise shapes using pen tool? Using photoshop or Illustrator is the answer?Thank you in advance.

Are you talking about shape layers or mask shape? If you're just making masks, use the rectangle tool or another shape tool to draw the mask and then click shape next to mask path to open the mask shape window. Then put in your exact pixel values:

Snap to points are turned off but they still keep snapping. WANT THEM OFF!! How do I do this?

Snap to points are turned off but they still keep snapping to. WANT THEM OFF!! How do I do this? I've gone into preferences and view, turned off the snap to and it still happens. So when I scale. the points snap to and mess up my line quality.
Please, anyone know how to fix this?

Jason,
In cases like this, the first guess is Align to Pixel Grid.
You may select everything and then untick Align to Pixel Grid in the Transform palette, and also untick Align New Objects to Pixel Grid in the flyout options.
You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

How do I set up a knob with fixed snap-to points on a logorithmic scale?

My question is pretty simple, but after rooting around in the knob/gauge proteries I can't seem to figure out how to do what I'd like:
I would like a simple knob type control with 4 possible values: 0.0125,0.125,1.25,12.5
I'd like them evenly spaced and I want the knob to only snap to one of these four values
I can at least get it to the point of having four values on there by placing arbitrary markers (scale->add marker), but I can't figure out how to get it to snap to these, or even if this is the bets way to go about it.
Thanks!
Solved!
Go to Solution.

See attached LV86 example. Open the properties dialog of the knob for more info about its configuration.
Attachments:
Log knob LV86.vi ‏7 KB

Cursor snap to point in XY graph

I have trouble in LabWindows/CVI 5.0 to have my cursor snap to a point in an
XY- graph, even when I set following attributes:
ATTR_PLOT_SNAPPABLE : TRUE
ATTR_CURSOR_MODE : VAL_SNAP_TO_POINT
Besides, also the attribute
ATTR_ENABLE_ZOOMING seems not to do its job.
Has anyone tried this before?
Kind regards,
Geert Van Doorselaer

Hy Geert,
> I have trouble in LabWindows/CVI 5.0 to have my cursor snap to a point in
an
me too.. (see my posting from 02/06/01)
> also the attribute ATTR_ENABLE_ZOOMING seems not to do its job.
Had this problem, too. But in my case it was an user's error:
You have to change the graph input mode to anything else but indicator,
enable zooming and use zooming by Ctrl + left mouse button.
I guess, the data mode has to be retain and if you change the contents of
the original buffer with the data to be plotted, the data has to be copied.
(ATTR_COPY_ORIGINAL_DATA = True)
I got it running, finally... ( I use CVI5.5)
Regards
Harald
=======================================
Flying:
The knack lies in learning how to throw
yourself at the ground and miss
(The Hitch H
iker's Guide)
mailto:[email protected]

How to turn of (howdoyoucallit.. 'snap to point' in newest After Effects 12.2.1.5)

Hello!
I just updated my After Effects CC.
When I ajust, for example the anchor point for a layer, it automatically 'snaps' to the anchor point of another layer.
It's really annoying
Anyone a tip to turn it of?
Thanks!!

You can turn snapping on and off in the view menu. See here.

Snap to point on scrollbar

Similar Messages

Maybe you are looking for