'snapping' behaving oddly??

Working on the timeline. The 'snapping' keeps popping (snapping) on. I 'unsnap' it using the 'n' key. Or even the 'View' 'Snapping' and click it off. And a few moments later it's 'snapped' on again all by itself.
A bug here? Anybody else experiencing this?
Ben

I agree that it would be nice to have the auto-snapping as an option, but according to the release notes, there is no option to disable this "feature".
Changes to Snapping Behavior When Performing Shuffle Edits
Shuffle (or “swap”) edits are performed by dragging a clip over an adjacent clip and then holding down the Option key. (For more information, see page 194 in Volume II of the Final Cut Pro User 6 Manual.) In Final Cut Pro 6.0.2, holding down Option after you begin dragging a clip temporarily enables snapping, regardless of whether snapping was turned on when you began dragging the clip. You can temporarily turn on or turn off snapping while you drag the clip by pressing the N key. After you release the mouse button, the snapping mode returns to however it was set before you began dragging the clip.

Similar Messages

Trackpad behaves oddly when firewire is used

All of a sudden my trackpad start to behave oddly when I have a firewire device connected. Specifically a MOTU Ultralite mk3 hybrid paired with a MOTU ultralite mk3 firewire. The problem started yesterday when I launch Logic Pro X. a minutes after the trackpad starts to be unresponsive and the pointer moving in wrong direction or jumping.
I tried to reset the PRAM with no luck. Even worst, when I tried to boot the macbook pro after rebooting the system freezes on the logo screen when the firewire port is used with that device. when I disconnect the firewire port the problem totally goes away.

RE: Crash Report
http://discussions.apple.com/message.jspa?messageID=2972949#2972949
RE: Guiness (nee Harpoon) Solution
Perhaps it is now time for the Harpoon solution (aka the Guinness solution in the mid and far west)
for those not in the know:
1. turn everything off.
2. unplug firewire cables
3. unplug power cords
4. get up from well worn chair
5. walk to refrigerator
6. open refrigerator
7. remove bottle of Harpoon (Guinness, local micro brew, etc)
8. pop cap
9. pour into glass ( you AREN'T going to drink it from a bottle, are you?)
10. sip responsibly. enjoy the moment. think pure thoughts
11. return to kitchen. If less than 15 minutes has elapsed, have another. Otherwise, retrurn to edit room.
12. Plug everything back together
12. fire up external monitors, VTR, external hard drives & computer in that order.
Does it work now? If yes, congratulate your self. If not, oh well, but at least you are in a much better frame of mind to begin some serious troubleshooting.
cheerios,
x

OS 10.3.9 Running slowly and behaving oddly

My system has been behaving oddly recently. In every application and category therefof. Pages load very slowly, then normally. Sometimes they won't load at all, can't find the server, then they load immediately a few moments later. Various applications will come up very slowly, then, at other times, come up quickly. I have tried turning it off, waiting, then turning it back on. No help. Although my disc space that needs reclaiming seems to have increased exponentially since I first began using the mac two years + or - ago. I have all the updates, security and otherwise, installed. I am wondering if I am infected with avirus of some sort, spyware, whatever.
What is a good spyware, etc. anti-virus application/software for mac that doesn't completely clog it up?

Hi BHJ,
you should try some system maintenance first: MacOS X 10.3/10.4: System maintenance
If this answered your question please consider granting some stars: Why reward points?

Is your Mail behaving oddly?

Hi there,
I have a .Mac account. I have the following weird behaviours:
1) When I read something, the email is not being marked as unread.
2) Sometimes I can't delete what I have just read.
3) it exaggerates the number of emails that are supposed to be in my inbox. (e.g. at the moment I am supposed to have 13 in my inbox, but I can only count seven).
4) Now it won't show what is supposed to be in my Inbox (but is not saying that the application is not responding).
5) I also appear to have gained a new .Mac account. which I want to get rid of but don't know how.
Er, any thoughts?
All the best and thanks,
Luke
iBookG4 Mac OS X (10.4.3) Bought December 2005 London
iBookG4 Mac OS X (10.4.3) Bought December 2005 London

Mail.app is behaving oddly rather suddenly for me, too. But just like the other person I'm not having a problem similar to the one you describe. Instead the issue I have is an ability to quit the software. The only way to quit this app right now is to shutdown my computer. Otherwise, if you try quitting you get into a loop. The app appears to quit, but then after seeming to have quit for a few seconds, it opens itself again and the loop continues. No other problems have accompanied this. I've done no upgrades that might have lead to this.

I live in WA. Since I joined in on a TPP conf call last week, the IP is coming out of NJ & my FB account is behaving odd, works fine @ work, is NSA spying on me

Always worked fine, clicked the link from the FB TPP page, got in (was thru google free conf), was able to see the power point for a couple of minute the got booted out, could not get back in. Ever since, my FB page (only rest of internet browsing looks fine) looks as if it were running in safe mode & IP is out of NJ. My computer began to act odd and required to be reset to earlier point.

Try to uninstall the appbario13 10.20.1.508 extension that show in the System Details List.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

Horizontal scrollbars behaving oddly

This is not a complete show-stopping bug but Logic Express (9) recently started having issues with horizontal scrollbars -- they center themselves. Occasionally they work as they are supposed to, but most of the time they immediately return to the center, which is really irritating after a while. I'll be scrolled all the way to the end of the timeline for example, and I decide I want to scroll back left slightly; I click on the scrollbar and any kind of drag makes it jump back to the center. It acts like the mouse cursor was there, too.
Reinstallation and trashing preferences did not fix the problem.

Same problem here, but it seems also related to the screen in use, at least in my setup. I'm running Logic on my MacBook with a native screen resolution of 1200x800. I have a second screen attached above it with a resolution of 1920x1080 which I use for the main Arranger screen, the MacBook screen itself is mainly used for displaying the mixer and AU's.
When the arranger screen is on my larger display the horizontal scrollbar is flying all over the place when I try to move it, but when I have the arranger window on my MacBook's screen it behaves normally. Seems like if Logic gets confused by the different widths of the screens, like if it is behaving to have 1200 pixels to scroll on while there are 1920.
Whatever happens, it's kind of annoying...

Rotating thru Safari windows with Command-` behaves oddly in v.5.0. Why?

If one has several Safari windows open at once, one can one-by-one "flip through" them by pressing Command-` (backward-accent/tilde), in turn bringing each new window to the front.
In earlier versions of Safari, Command-` behaves in a very predictable and useful way -- it rotated through all the windows unidirectionally if you keep pressing. So, for example, if you had 7 windows open at once, and kept pressing Command-`, you would first see page 1, then page 2, then page 3, etc., up through page 7, and from page 7 then you would keep going "forward" to page 1 again. The windows would go in a cycle. +This would remain constant even if you closed windows once you arrived at them.+
That's the way it always has been (in my memory), and the way I like it.
HOWEVER, I now have Safari 5.0 with 10.6.4, and it behaves differently! And not at all to my liking.
Instead of rotating through all the windows in order, Command-` now "bounces" back and forth in its direction if you perform any action to any window.
So, for example, now if you have 7 pages open, and want to rotate through them all to see what they are, and if unwanted, close them, the following strange and ANNOYING behavior happens as you repeatedly press "Command-`":
If you're on page 1, you then go to page 2, then page 3 -- and then if you close page 3, and press Command-` again, you DON'T go to page 4, but rather back to page 2 again, then page 1, then page 7 -- and if you close page 7, you then bounce back to page 1, page 2, etc.
This also happens if you do ANY action to the top page -- move its location, enter text in a field, close it, whatever.
Why does Safari do this now? It's totally counter-intuitive and incredibly bothersome, because it's no longer a simple task to flip through all open windows and close the unnecessary ones. Instead, one constantly is bouncing backwards and forwards like one is in a rubber room. And I end up feeling like I'm in a rubber room.
Has anyone else noticed this new manner of Safari behavior? And if so (and most importantly): *Is there any way to change it back to the way it used to be?*
This is important to me because I dislike using tabs and I often have several windows open for a project, which I then often want to (mostly) close and start a new project, etc. I takes way too much time and confusion simply trying to see all open windows with the new behavior.

I am running 10.6.4. It's just that when I fist updated it (on the first day it was available), Apple had not yet added 10.6.4 to the Forum settings. But now it's there and I have updated it in my profile.
Before I do any of your suggested fixes, I would need to know that the behavior my Safari is exhibiting is abnormal. Because I think that nothing is "wrong" with my Safari -- I think this new behavior is built-in and it is the way it's supposed to be. So that all the fixes in the world won't change anything.
So, what I'd really like to see is a report from someone --anyone -- that Safari 5.0 behaves the same way for them, or differently for them.
I just did a test myself and it took exactly one minute. Can someone do it for me and report back?
Here's the simple test:
"Minimize" all your existing Safari windows to get them out of the way.
Open a new window, for example, a Google home page. Type in the number "1" in a text field.
Open a second Google (or whatever) page, type in a "2" in a text field.
Do this all the way up to 7 open pages.
Then start hitting "Command-`." If you just hit Command-` repeatedly and do nothing else, you will indeed rotate through the windows like so: 7-6-5-4-3-2-1-7-6-5-4-3.....etc.
NOW HERE'S THE TEST. In the middle of this cycle, close window #4. What happens next to you? In the "old" Safari, you'd keep cycling backwards through the windows 3-2-1-7-6-5-3-2-1-7...etc.
But in Safari 5.0, this what happens to me: After closing window #4, I "bounce back" and now I'm heading in the opposite direction, so that after closing the window #4 it goes 5-6-7-1-2-3-5-6-7-1...etc.
Continue the test by now closing window #6 when you get back to it. Once again, you will "bounce" backwards. So that you will be going 1-2-3-5-6-[close window 6]-5-3-2-1-7-5-3...etc.!
Tell me: is that how Safari behaves for you? (Or anyone reading this?) If so, then my Safari isn't "broken," it's behaving exactly as it is designed to be behaving.
So if that is the case (which I suspect), then my question is not how to "fix" Safari, because fixing it won't alter the behavior, but rather: Are there are settings that can be changed or keyboard shortcuts altered or whatever that can restore the "old Safari" way of behaving?

Align tool behaving oddly

Hi, the align tool (i mean the submenu in ,object) is not behaving properly, for me. As I say align left edges it does not, it only moves the rightish to to left a bit, if I click the same submenu again abit more to the left, but it never aligns any to objects properly, nor edges neither centers. Is it just another motion 3 bug or is it me?
Thanks

Which version of photoshop and operating system are you using?
You need to ether have two or more layers selected or an active selection.
Photoshop Help | Align and distribute layers
http://www.heathrowe.com/photoshop-center-alignment-tricks/

Dust & Scratches behaving oddly

I've just started using Photoshop CS5 (2007 iMac 2.8Ghz, OS 10.5.8) after using CS4 and am noticing odd performance from the venerable Noise > Dust & Scratches filter.
I set my parameters using live preview, click OK and wait: the resultant image is all but unchanged. Nothing at all like what the preview was showing me. If I zoom way in on the file I can see changes, but it's as if the settings were all too fine to have had the result being previewed.
If I go back to CS4 the behavior is normal again.
Need help: working on deadline.
Thanks!

Are you viewing at 100% (command-1)?
Because anything else is better not to be considered reliable.

Flash player behaving oddly

I am trying to learn how to put flash into a website using Dreamweaver. Yesterday everything ran just fine. Today when I tried to do a live preview of my website I was asked to update my Adobe Flash Player. I did so and now where the FLV file should be showing I have instead all the control buttons, forward arrow, pause, stop, etc. I uninstalled Adobe Flash Player and downloaded and installed the newest version. I was again asked to update my flash player which was odd. I did update it even though I had just downloaded and installed the newest version. Now I am back to arrows, and pause buttons and the like.
I am running Windows Vista 64 bit. Please keep your answers simple. I am not all that techie but I am determined to figure out how to do this!
thanks
gretchen

Guten Abend Frau Gretchen,
it's too bad, even in my DW's live preview I don't have these outrageous graphics, all is wonderfully visible.
As so often, sometimes it's better to let do these jobs from specialists and not let do all the work from our DW, like a jack of all trades device!That's my motto anyway! As you know so I'm using "filezilla" or I prefer "typo3", a pro for an offline preview. Here you will find some links to explain everything better:
http://typo3.com/Home.1850.0.html
http://typo3.com/About.1231.0.html
and to see what's if that works well with your equipment, here we are with a feature-list:
http://typo3.com/Feature-list.1243.0.html
Alles Gute und viel Erfolg damit
Hans-G.
P.S.
I could not resist and had to try ithttp://www.goldschmiede-blumberg.de/AdobTest/_sail/index.html

SeekBar handle behaving oddly

Hi,
I am using an FLVPlayback component to control an FLV file, using ActionScript 2, Flash Player 10. I have not used an existing skin but am customising my own. I have added a seekBar which has started to behave incorrectly, ie when I click on the handle, drag off it and release the mouse button outside of the handle hit area (as a user would undoubtedly do by accident), the handle still moves when I move the mouse. This consequently changes the FLV playhead as if I had my mouse on the handle.
Any help would be really appreciated as this is driving up the wall. I've spent ages trawling the web for solutions but drawn a blank.
Cheers,
Mark

I don't know if this makes a difference, but the I have put the seekBar component inside a movieclip which is itself draggable, the idea being to create a draggable window containing the flv controls and narrative that is fired at cue points. Perhaps the component is only designed to work itself if isn't housed within a parent movieclip?

Key behaves oddly

OK, I know I'm being picky, but I just want to make sure my MacBook is okay, especially since it's already my second one.
The Z key (which is the Y key for you american users) behaves a little different from all the other keys. When I press it quite hard and for a little longer than usual (because I'm playing some music with the keyboard in Logic Express, for example), it is stuck for a very short time and then pops up quite hard with an audible "pop". None of the other keys behave like that. However, if I strike it normally, it works just as all the others.
Do you think I should stop worrying or could this really be a problem? Also, if the key should break indeed, is this covered by warranty?

I would stop by the Apple Store and see if they can replace it. If the problem is with only that key, it's just a process of popping that one out and clicking a new one in.

Why are my album listings behaving oddly!?

I'll try and keep this short, but it probably won't make sense without the detail...
I've just been copying music across from iTunes to my iPod - mainly tracks from compilation CDs that friends have made up for me, and something odd has started happening.
For example, I have a dozen CDs that are all 'Driving Mix'. Before the last major iPod Touch software update, a few months back, if I just copied all the CDs to iTunes and changed the album info on all the tracks to 'Driving Mix' and then copied that across to my iPod, they would all appear as one album - 'Driving Mix'. So I'd end up with one 'album' on my iPod which actually contained the 100 or so tracks from a dozen CD mixes.
However, since the iPod/iTunes update, if I follow the same steps, and then go into 'albums' on my iPod, it now lists 100 albums called Driving Mix. And if I click on any of them, it still shows all the other Driving Mix tracks, but for some reason it is including them all separately in the album listings.
It's not just happening with homemade compilation CDs - there are a few bought albums that I've copied across that are now doing the same thing.
Any ideas why, or what I can do to fix it?

Did you check "group compilations when browsing" under the Advanced preferences within iTunes?

QT 7.1.5 behaving oddly

Hello,
I downloaded the update on QT recently and have found it behaving strangely. Sites such as Youtube don't seem to work any more and all I get is a QT symbol greyed out with a question mark on it. Other sites seem fine if a bit erratic. Have I missed something?
Many thanks for any help,
Stephen.

Some sites use Adobe Flash format, and if QuickTime is set to enable Flash, it will try to play those videos which, unless they're in an older Flash format, it can't. Make sure you have the latest Flash player installed, then open the QuickTime system preference, go to the Advanced tab, and make sure that the checkbox that says "Enable Flash" is unchecked.

IPhone 6plus behaved oddly

Hey all,
I just brought my iPhone 6plus 64gb 3 days ago and today was the first time I let the battery run very low. It went down to about 3% and then switched off like any normal iphone would do. After about 2 minutes, I tried pressing the power button and the phone turned on and showed battery level to be 2%. Then it switched off again and turned on one last time after I tried pressing the the power button. The battery level was again 2%. The last time it switched off, it just went blank. I mean iPhone's are suppose to show 'connect to charger' symbol yeah after you press the power button once the phone dies? It didn't. What I noticed was when I pressed the power button, the screen just glowed up slightly(while still black) as if it was the backlight of the screeb slightly lighting up but it didn't display anything else other than black screen. I tried pressing the power button several times but same thing occurred. Then I connected it to my charger and it showed the 'plugged in symbol' while phone has died for about a minute and started to boot up and showed 2% battery and charging. Any idea of this odd behavior? Any help will be appreciated. Thanks

Nate607X wrote:
All iPhones and ipads show this on their display if your hold the power button once the device runs out of battery. My iPhone didn't show this screen at all. That's what I'm asking. Why didn't it?
Because you kept forcing it on and off over and over again, which uses more power than the iPhone normally would, so it got drained past the 'dead battery screen' part. The process of starting up a device uses more power than simply running the device. It's like a car; you use up a lot of gas when starting the engine compared to letting it run at idle for a few minutes.
If your iPhone booted back up after you let it charge for a while, then what, exactly, is your problem?

'snapping' behaving oddly??

Similar Messages

Maybe you are looking for