Snapping cursor line to end of clips

I recently upgraded from 1.5 to 3 and for some reason by default the play line thing doesnt snap to the end of clips automatically. Does anyone know how to find the option that will allow that line, i dont know what its called, the line that scrolls past the clips when you hit play, how to make it so that when you click hold and move that line it automatically snaps to the end of the clip when it passes it?

Maybe you need to turn on the relevant Snapping option, Snap to Clip. They appear in a drop down menu when you right click on the Timeline at the bottom of the screen.

Similar Messages

Cursor jumping to end of clip in FCP log and transfer

I'm using AVCHD footage from a Sony hxr-nx5u camera. I copied the clips to a hard drive and am now using log and transfer to get the clips into FCP. My problem is that on some of the longer clips (pieces over about 10 min) the cursor start to jump or snap to the end.
Example, through the first part of the clip I can drag the viewing cursor back and forth along the clip's timeline. When I let go, it stays there. If I do the same thing in the second half or later of the clip, when I let go the cursor jumps to the end of the entire clip every time. I can't log or mark in and out points for the second half of the clip unless I just let it play though. (If I do let it play through, I still can't go back and adjust it)
I'm using Final Cut 7 and think it's fully updated.
Very frustrating to say the least. Can anyone provide any help on this?

Hi -
No first hand experience at this, but my understanding is there is currently a problem importing clips from that camera that are over 10-15 minutes.
See this thread for a possible workarounds/solutions:
http://discussions.apple.com/thread.jspa?messageID=11446024&#11446024
Not sure this will help you but might get you started in the right direction.
MTD

How to highlight a line in a text stream and position the cursor at the end.

I would like to select a line in a text control data stream, highlight the text, and place the cursor at the end of the line so that the text control can be edited at that point.

Depends on what you mean by "highlight". If you mean highlight in the sense of when you use the mouse to select text, then you can't do that and then place the cursor at the end, since that would effectively "unhighlight" the text. You need to use a different kind of "highlight", like turning the text bold or something. This KB article talks about highlighting particular characters: How Do I Highlight Particular Characters in a String Control?
See attached for simple example. Modify as needed.
Attachments:
Text Select.vi ‏19 KB

Repeated Frames at the end of clips

I have a MacBook Pro with the adobe premiere pro cc 14, but I noticed this problem is CS6 also. The problem is this: Say I have two clips in the timeline that are connected (Clip A, Clip B).
If I alter Clip B in anyway (change scale or position, or simply remove it from the timeline) the first frame of Clip B will remain at the end of Clip A. So, when I execute the playback function I can see a quick flash of Clip B at the end of Clip A.
Here's what I've tried:
I tried rendering the files--didn't work.
I tried simply trimming the repeated frame off--didn't work.
Here's what did work.
There's a straight line that goes through every clip, I don't know what its called but I think it has something to do with the speed, I would drag that from say 100 to 96.55. The video would have the red render bar above it, and the repeated frame would disappear.
HOWEVER, in my current project I have serval repeated frames in a blank space where there are video clips, so the previous method can not work.
What the heck!?!?!
Thanks

What are these clip exactly
Please post a screendump in treeview.
MediaInfo Mac

How to position the cursor at the end of the text with EDIT_TEXT?

Hello, it wanted to ask to them if somebody could make work the module of function EDIT_TEXT so that it positions the cursor at the end of the text that is visualizing in the text editor. In the documentation it says that passing a ' X' to him in the field scrollend of the parameter Control is obtained that operation. Nevertheless, I did this and the cursor continues appearing at the beginning of the text that visualizes.
Somebody could help me please?
Regards,
Gabriel
PD: The code that I use is the following one:
FORM f_ingresar_comentarios.
DATA: l_action,
l_result LIKE itcer,
l_pedido LIKE thead-tdname,
li_coment_save LIKE i_comentarios OCCURS 0,
li_coment_aux LIKE i_comentarios OCCURS 0 WITH HEADER LINE,
l_lines TYPE i,
l_lines_save TYPE i,
l_lines_insert TYPE i,
l_index TYPE i,
l_index_aux TYPE i,
l_insert,
lwa_control LIKE itced.
CLEAR: l_action.
CLEAR i_comentarios.
REFRESH: i_comentarios,
li_coment_save,
li_coment_aux.
l_pedido = v_pedido.
Leemos el texto si es que existe
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = v_id_text
language = sy-langu
name = l_pedido
object = c_ekko
IMPORTING
header = wa_cabecera
TABLES
lines = i_comentarios "Lineas de texto leídas
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
Armamos la cabecera por primer comentario para el pedido
CLEAR wa_cabecera.
wa_cabecera-tdobject = c_ekko. "Objeto en tabla TTXID
wa_cabecera-tdname = v_pedido. "Nro de pedido
wa_cabecera-tdid = v_id_text. "ID en tabla TTXID
wa_cabecera-tdspras = sy-langu. "Lenguaje
wa_cabecera-tdlinesize = 70.
ENDIF.
Salva comentarios originales
li_coment_save[] = i_comentarios[].
lwa_control-scrollend = c_x. " c_x = 'X'
Abre el editor de texto
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
header = wa_cabecera
save = space
control = lwa_control
IMPORTING
newheader = wa_cabecera
function = l_action
RESULT = l_result
TABLES
lines = i_comentarios
EXCEPTIONS
object = 1
id = 2
language = 3
name = 4
linesize = 5.
Si cambio los comentarios, actualiza comentarios
CASE l_action.
WHEN c_unchanged.
WHEN c_delete.
WHEN c_update OR
c_insert.
Obtiene cantidad de lineas de comentarios originales y modificados
DESCRIBE TABLE li_coment_save LINES l_lines_save.
DESCRIBE TABLE i_comentarios LINES l_lines.
Si se insertaron lineas...
IF l_lines > l_lines_save.
Calcula cantidad de lineas a insertar para luego calcular valor de
indice a partir del cual insertar los nuevos comentarios
l_lines_insert = l_lines - l_lines_save.
l_index = ( l_lines - l_lines_insert ) + 1.
Controla que al menos una de las lineas insertadas sea diferente de
blanco
l_index_aux = l_lines.
l_insert = c_n.
DO l_lines_insert TIMES.
READ TABLE i_comentarios INDEX l_index_aux.
IF sy-subrc = 0 AND
i_comentarios-tdline <> space.
l_insert = c_s.
EXIT.
ENDIF.
l_index_aux = l_index_aux - 1.
ENDDO.
IF l_insert = c_s.
Carga comentarios originales y agrega lineas insertadas
li_coment_aux[] = li_coment_save[].
APPEND LINES OF i_comentarios
FROM l_index
TO l_lines
TO li_coment_aux.
Setea variable para indicar actualizacion de comentarios.
v_comentario = 'S'.
Agrega usuario y fecha del comentario
CONCATENATE sy-uname
sy-datum
INTO li_coment_aux-tdline
SEPARATED BY space.
li_coment_aux-tdformat = '*'.
APPEND li_coment_aux.
Grabamos el texto
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = wa_cabecera
savemode_direct = c_x
IMPORTING
newheader = wa_cabecera
TABLES
lines = li_coment_aux
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM. " f_ingresar_comentarios
In addition, I made another program simpler that it uses the same functions and also have the same problem:
*& Report Y_GVA_TEXT *
REPORT y_gva_text .
DATA: wa_cabecera LIKE thead,
i_comentarios LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: l_action,
v_comentario,
l_result LIKE itcer,
v_pedido LIKE thead-tdname VALUE '3',
l_pedido LIKE thead-tdname,
c_a05 LIKE thead-tdid VALUE 'A05',
c_ekko LIKE stxh-tdobject VALUE 'EKKO',
l_lines LIKE sy-tabix,
lwa_control LIKE itced.
CONSTANTS: c_x VALUE 'X',
update VALUE 'U', "Langtext verändert
insert VALUE 'I', "Langtext eingefügt
delete VALUE 'D', "Langtext gelöscht
modify VALUE 'M', "Kein Langtext, Inlinezeile veränd.
unchanged VALUE ' '.
CLEAR: l_action.
CLEAR i_comentarios.
REFRESH i_comentarios.
Leemos el texto si es que existe
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = c_a05
language = sy-langu
name = v_pedido
object = c_ekko
IMPORTING
header = wa_cabecera
TABLES
lines = i_comentarios "Lineas de texto leídas
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Armamos las cabecera para mostrar los comentarios
CLEAR wa_cabecera.
wa_cabecera-tdobject = c_ekko. "Objeto en tabla TTXID
wa_cabecera-tdname = v_pedido. "Nro de pedido
wa_cabecera-tdid = c_a05. "ID en tabla TTXID
wa_cabecera-tdspras = sy-langu. "Lenguaje
wa_cabecera-tdlinesize = 70.
ENDIF.
lwa_control-noendlines = c_x.
lwa_control-scrollend = c_x.
Abre el editor de texto
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
header = wa_cabecera
save = space
control = lwa_control
IMPORTING
newheader = wa_cabecera
function = l_action
RESULT = l_result
TABLES
lines = i_comentarios
EXCEPTIONS
object = 1
id = 2
language = 3
name = 4
linesize = 5.
Si cambio los comentarios, actualiza comentarios
CASE l_action.
WHEN unchanged.
WHEN delete.
WHEN update OR
insert.
Agrega usuario y fecha del comentario
CONCATENATE sy-uname
sy-datum
INTO i_comentarios-tdline
SEPARATED BY space.
i_comentarios-tdformat = '*'.
APPEND i_comentarios.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
header = wa_cabecera
IMPORTING
newheader = wa_cabecera
TABLES
lines = i_comentarios.
ENDCASE.

Murugesh,
I believe that you have mis-read Gabriel's problem.
Gabriel,
The cursor is not positioning at the base of the editor as you have cited.
In order to get this functionality to work, you must set the LINE_EDITOR import paramter to 'X'.
data: hdr like THEAD.
data: l_itced like itced.
hdr-tdobject = 'VBBP'.
hdr-tdname = '4000029521000030'.
hdr-tdid = 'Z005'.
hdr-tdspras = 'E'.
hdr-TDLINESIZE = '100'.
hdr-TDTXTLINES = '3'.
l_itced-SCROLLEND = 'X'.
CALL FUNCTION 'EDIT_TEXT'
    EXPORTING
    DISPLAY             = ' '
    EDITOR_TITLE        = ' '
      HEADER              = hdr
    PAGE                = ' '
    WINDOW              = ' '
    SAVE                = 'X'
      LINE_EDITOR         = 'X'   " here !!!
      CONTROL             = l_itced
    PROGRAM             = ' '
    LOCAL_CAT           = ' '
IMPORTING
    FUNCTION            =
    NEWHEADER           =
    RESULT              =
    TABLES
      LINES               = lines
EXCEPTIONS
    ID                  = 1
    LANGUAGE            = 2
    LINESIZE            = 3
    NAME                = 4
    OBJECT              = 5
    TEXTFORMAT          = 6
    COMMUNICATION       = 7
    OTHERS              = 8
Don't forget those points !!

Tab going to a new line when end of line is reached

In most text editors, when you hold the tab key down, the cursor goes from tab stop to tab stop across the line. When end of the line is reached, the cursor goes to the next line, again goes from tab stop to tab stop on the new line, and so on. You end up with multiple lines.
In TLF, with tabStops set, holding the tab key down, the cursor goes from tab stop to tab stop across the line. But when the cursor reaches the end of the line, it doesn't go to the next line. The cursor stays at the end of the line while more tab characters are inserted into the text flow. There is always only one line.
Is there a way for TLF to have the tab key go to the next line when the cursor reaches the end of the line?
Thanks for the info.
Will

Thank you very much for the update.
We also discovered that, any line which has the previous line ending in a tab, any leading tabs will not show. For example (all in the same <p>):
Line one ...<tab/>
<tab/>Line two
The leading tab on line two will not display. If the previous line does not end with <tab/>, then the leading tab on the following line shows. Is this related?
Also, will the fix come in a 2.x update? Any time frame?
Thanks again for the info.
Will

Visual indicators at beginning/end of clip or sequence?

In cs6 is there any sort of visual indicator to let you know that you are at the beginning/end of a clip or sequence? Anyone familiar with FCP, I'm look for something equivalent to the L shape or blue line that appeared at the beginning and ending of clips and sequences.
Thanks.

You could use "show head and tail " here:
http://help.adobe.com/en_US/premierepro/cs/using/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.ht ml
under the heading:
Set the display style of the video track

Popping sounds at end of clips

Hey
I'm using Audition CS6 (windows) and I'm getting these click/pop sounds at the end of clips in multitrack. If I open the individual clips up to edit and play it through there isn't any sign of it. However if I play the clip through in edit mode and stop it near the point where the pop is I will hear the pop when I hit stop. The irritating thing is if I do a mix down these little errors are still there and they are pretty loud!
Any idea what could cause this? I'm using windows 7 and Cs6.
G

Without seeing the waveforms and/or hearing what you've got this is a complete shot in the dark -- and probably unlikely since it sounds like this is happening to multiple files and not just one but:
1) Does the audio in your clips end with the waveform much above or below 0 amplitude? (You need to zoom in extra close to see if this is the case) If your wave stops too far above or below the line, and then suddenly drops to 0 as it's playing through in a mix it can cause clicks.
2) Do you have the gain boosted on these clips anywhere in the multitrack mix window? If so, maybe you've got a click in the wavefore that's not too noticeble when playing in the edit window, but boosting the gain in the multitrack makes it more noticeble.
~Dave

Regarding sy-lilli, Get cursor line

Hi Folks,
I'm having some trouble with getting the cursor line in a search help selection.
This is my code:
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'XBLNR'
            dynpprog        = sy-repid
            dynpnr          = sy-dynnr
            dynprofield     = 'ITAB-FACTURA'
            window_title    = 'Facturas'
            value_org       = 'S'
       TABLES
            value_tab       = itab_bsik_v[]
            return_tab      = return_tab
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc = 0.
ENDIF.
GET CURSOR LINE l_linea.
READ TABLE itab_bsik_v INDEX l_linea.
DATA: l_stepl LIKE sy-stepl,
         l_indx LIKE sy-stepl.
DATA: dynpfields        LIKE dynpread OCCURS 5 WITH HEADER LINE.
* Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
       IMPORTING
            povstepl        = l_stepl
       EXCEPTIONS
            stepl_not_found = 0
            OTHERS          = 0.
l_indx = grid-top_line + l_stepl - 1.
REFRESH dynpfields.
CLEAR   dynpfields.
dynpfields-fieldname = 'ITAB-FACTURA'.
dynpfields-fieldvalue = itab_bsik_v-xblnr.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'ITAB-BUZEI'.
dynpfields-fieldvalue = itab_bsik_v-buzei.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
       EXPORTING
            dyname     = sy-repid "Program name
            dynumb     = sy-dynnr "Screen number
       TABLES
            dynpfields = dynpfields
       EXCEPTIONS
            OTHERS     = 0.
The internal table itab_bsik_v is filled with 10 records. So when user clicks on record 5, I would expect that l_linea gets 5 as cursor line, however I'm getting 1 always.
I tried changing the GET CURSOR LINE by sy-lilli but I'm not understanding really well the sy-lilli variable because when I click the first line of the search help result, I get a 4 as the index, and when I click in the last line I get 13.
If anyone could help me with this I really appreciate it.
Thanks for your help.
Regards,
Gilberto Li

Instead of using GET CURSOR LINE why not u use return_tab.
This int. table should contins data selected ny user during F4 help. I have done few changes in ur code. pl. check whether it works or not.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'XBLNR'
            dynpprog        = sy-repid
            dynpnr          = sy-dynnr
            dynprofield     = 'ITAB-FACTURA'
            window_title    = 'Facturas'
            value_org       = 'S'
       TABLES
            value_tab       = itab_bsik_v[]
            return_tab      = return_tab
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc = 0.
ENDIF.
GET CURSOR LINE l_linea.*
READ TABLE itab_bsik_v INDEX l_linea.*
read table return_tab into l_wa_return
                  with key fieldname = 'XBLNR'.
if sy-subrc eq 0.
   l_XBLNR = l_wa_return-fieldval.
endif.
read table return_tab into l_wa_return
                  with key fieldname = 'BUZEI'.
if sy-subrc eq 0.
   l_BUZEI = l_wa_return-fieldval.
endif.
DATA: l_stepl LIKE sy-stepl,
         l_indx LIKE sy-stepl.
DATA: dynpfields        LIKE dynpread OCCURS 5 WITH HEADER LINE.
Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
       IMPORTING
            povstepl        = l_stepl
       EXCEPTIONS
            stepl_not_found = 0
            OTHERS          = 0.
l_indx = grid-top_line + l_stepl - 1.
REFRESH dynpfields.
CLEAR   dynpfields.
dynpfields-fieldname = 'ITAB-FACTURA'.
dynpfields-fieldvalue = l_XBLNR.
   dynpfields-stepl      = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'ITAB-BUZEI'.
dynpfields-fieldvalue = l_BUZEI.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
       EXPORTING
            dyname     = sy-repid "Program name
            dynumb     = sy-dynnr "Screen number
       TABLES
            dynpfields = dynpfields
       EXCEPTIONS
            OTHERS     = 0.

Blank Lines at end of file when using Variable Substitution in File Adapter

Hi all,
I'm using variable substitution in a File Adapter, it's refers an element of message, like:
filename payload:MESSAGE_INTERFACE,1,FILENAME,1
The variable substitution is working right, but it's append a BLANK LINE at end of file.
Anyone knows how to solve this problem ?
Thanks in advance.

Hi Regis,
I suppose you're using content conversion?
if so try adding
<b>endSeparator</b> = '0'
to your last element
this will delete the default line break at the end
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

REGARDING position the cursor at the end of the field

i friends,
i have a field having length of 20 ,i need to place the cursor at the end of the filed means at the 20 th position the cursor must be there how will i acieve this...plz help me the value which i will pass to this field is may be of character 4 ,5 what ever but the cursor will be always at the 20th position or at the end of the filed plz help me.......

parameters:pa_str(20) type c default '11111111111111111111' .
initialization. .
Set cursor field 'PA_STR' offset 20.

Video freezes at the end of clips.

Hi, I have encountered strange glitch. I have put many short clips into project, with straight cut, no transitions between. Some of clips doesn't follow seamlessly - video freezes for about 1sec at the very end of clip but I can hear audio from following clip and after that 1sec freeze video continues with audio. Therefore I "miss" that 1sec of video from the beginning of the clip. It happens only with some of clips and sometime I can sort it out with slight trimming. But mostly cannot.
What am I doing wrong there?

If you go into iMovie Preferences, make sure you select "Display Time Codes" as hh:mm:ss:frames.
By default, iMovie edits to the nearest 10th of a second, but by checking this parameter in preferences, you can edit to the nearest frame.

How to make cursor lines appear in saved file

I have a graph that has 3 cursor lines. They are visible on the graph.
When saving the graph to a file (.png or .jpg) the graph waveform is visible, but the cursor lines are not.
The image data does not contain the cursor lines. How do I include those to the image data.
I verified the image data using an image indicator and the appropriate VI.. So for some reason, the image that is being saved is of the indicator (Waveform Graph) and the waveform (data), but not the cursor lines.
I'm sure I've saved images of a graph that included the cursor lines in the past (LV7.x), but I cannot remember what I did.
Thanks,
RayR

Thanks Christian,
I (may) have found the problem... At one point, I clear all cursor lines. I may have a race condition between clearing the lines & saving image to file.
I did see the cursor lines in one instances when I stopped the program prematurely.
I knew it had to be siomple. I didn;'t recall doing something special the last time I did this..
Thanks!
RayR

Weird separator (cursor line) in tabs and bookmarks toolbar

Hi, after installing firefox I got some weird cursor lines in the tabs and in the bookmarks toolbar and its kind of annoying

yeah..but i was talking about the ones in the tabs..they are somehow connected to the cursor in the address bar..

Timeline removing start and end of clips

Apologies if this has been posted before - got through 20 of the 116 pages to look for it!
iMovie 6.0.1 appears to have a bug when dragging clips from clip pane into timeline. Start and end of clip are cut off. Same occurs when adding transition in timeline. This does not happen when working in clip viewer rather than timeline, though there is still a small loss when adding transitions (this probably accounts for a previous posting complaining about loss of audio synch when adding transitions).
iMac, PowerMac6,1 PPC 1GHz Mac OS X (10.4.6)

That reminds me of a slightly different version:
SQL> with t as (
2 select 201050 yw from dual union
3 select 201051 from dual union
4 select 201052 from dual union
5 select 201101 from dual union
6 select 201102 from dual
7 )
8 --
9 --
10 --
11 select trunc(trunc(to_date(substr(yw, 1,4), 'yyyy'), 'y')
12                            + (substr(yw, 5,2)
13                              + (case
14                                   when to_char(trunc(to_date(substr(yw, 1,4), 'yyyy'),'y'),'iw') ='01'
15                                   then -1
16                                   else 0
17                                 end
18                                 )
19                              )*7
20              , 'iw'
21              )
22 from    t;
TRUNC(TRUN
13-12-2010
20-12-2010
27-12-2010
03-01-2011
10-01-2011
5 rows selected.
Found that one here about a year ago: http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:509645007430#tom69446106735028
Needed to use that approach as well to deal with yyyymm format one application I worked on then.

Snapping cursor line to end of clips

Similar Messages

Maybe you are looking for