Snapshot data for working offline

I wish find the method for obtain a snapshot of my data for working offline
Any Idea thanks.

Hello,
I am assuming that you currently have access to live data either through a web service or a sharepoint server.
In this scenario, I believe you should be able to export the data in Excel format and then use the same to design the dashboard.
I have found this [_link_|http://blogs.msdn.com/b/erikaehrli/archive/2009/01/30/how-to-export-data-to-excel-from-an-asp-net-application-avoid-the-file-format-differ-prompt.aspx] and hope you find it helpful.
Thanks.

Similar Messages

For Working offline - Which one to use - local database caching or reliable messaging?

Hi,
I am working on a mobile application with lcds where there is a feature to be implemented. The user can use the application in airplane mode and be able to automatically send requests to server when he comes online. After some research, I found that I have to use a feature in the documentation called ocasionally conencted clients, which uses local database with dataservice.savecache() and offline adapter. I also found another feature called reliable messaging which takes care of sending the pending requests when the user comes online, but not sure if this feature supports offline mode for longer periods. The documentation mentioned that reliable messaging is only good for transient network disconnects, meaning disconenction for shorter time.
Can anybody please confirm which is the right feature that best suits this requirement?
Thanks,
Swathi.

Hi Ashish,
Thank you so much for the resource. One more question, The code in the resource link, has calls to Dataservice.disconnect() and Dataservice.connect() on the buttons. If my user need not bother to click on those buttons for connections and just set his phone to airplane mode and start working, I am using SocketMonitor class to monitor for network connection and then perform the Dataservice.connect(). In that case, I have problems when network is connected, the data service seems connected automatically some times and not connected other times resulting in errors. I am using autoConenct = true. How can I handle this? Do I have to call disconnect when socket is not available and then call conenct when it is available, things like that? Or Is there any other way to implement this without using SocketMonitor class?
Thanks,
Swathi.

Best way for working offline/online?

I edit my RED files in Prores SQ 1024x576 when doing offline. Online is done in Prores 4444 1920x1080.
I´ve tried different ways to convert the project in FCP from lowres to highres, and I´m now using XML. I choose 1920x1080 as sequence settings when importing the XML, but I then have to reconnect with the online files, remove filters from the offline etc. I also have to create a new project before importing to avoid reconnecting with online files in the offline timeline too.
Is there a easier way to do this?

It's more complicated than that. There are four flavors of 422.
There's a complete section in the FCP7 manual about using REDCODE media.
There's a complete explanation of the Pr Res codecs in the FCP7 manual.
Final Cut Pro 7
Professional Formats and Workflows
Working with Apple ProRes
Apple ProRes is a post-production format designed for pristine quality, economical hardware configurations, and high-performance, multistream Final Cut Pro real-time editing—for film, digital cinema, high definition (HD), and standard definition (SD) workflows.
This chapter covers the following:
About the Apple ProRes Codecs
Types of Apple ProRes Codecs
Working with Apple ProRes Codecs
Apple ProRes Format Specifications
Apple ProRes Tips
About the Apple Intermediate Codec
bogiesan

What is the best way to reconcile and bulk upload user account and entitlement data for an offline resource?

What we think is the following:
Create a GTC resource, with flat file reconciliation and spml provisioning.
Edit the provisioning process to get it work disconnected, based on http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/disconn_resources.htm#CHDDGGHD, we need to modify all SPML sending process tasks to be manual.
Create a disconnected resource from this resource in a sandbox.
In this case we do not need to develop custom codes, we only need to modify the provisioning process to be manual.
Any other solutions or best ways to do it?

Hi Gergely
The best way is to use OIM bulk load utility.
Using the Bulk Load Utility - 11g Release 2 (11.1.2) --> Loading Account Data
This is very easy and smooth.
Thanks & Regards
Shashidhar

No data for a week now, why?

I just came to Verizon a week ago. I got the Droid Razr for my wife and i had to order the Razr Maxx for me. Well i took some time to get my phone but once i did i had it one day and the next we had no data service. Both our phones have no data and sometimes 1x or 3g shows up but will disapper right after. I was told it was a service outage, well thats fine but a week later it is not fine. The thing that really gets me is that four of my co workers have Verizon and they have 3g. One has a Droid Bionac and the others have non smartphones. I get no answer from Verizon, i have called and went through the steps and then they say they will call back in four hours and get an update from me but they don't. I"m just getting very angry and i don't understand why i cant be told whats going on. I would also like to know why it seems the Razr's are the only ones with this problem. I need data for work and if this is what i have to put up with i might have to move on. I really would like to give verizon a chance but this is getting old. Is anyone else having these problems. Oh yeah i live in WV by the way.

Hello Heifitz
Having to wait a week for data coverage would be very upseting. Let's get this fixed as soon as possible.
Are you still experiencing the issue? What is your current zip code? Please remove the Sim card and reinsert. Is Wifi turned off? If not please turn Wifi off and retest. Please power the device on in safe mode and retest. This will rule out any application that could be interfering. Here's how to power on in safe mode:
Power Off the device
Power On the device
As soon as DROID Eye screen displays, press and Hold both Volume Up & Volume Down keys (Keep pressed until you reach Idle screen)
Then the main screen will display "Safe Mode"
Please let me know if this helps
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

My MBA was stolen. I need to buy a replacement the next day bec I used it for work. I downloaded the Find iPhone apps and registered my stolen MBA. If I will erase MAC will it also erase the data of my new MBA?

My MBA was stolen. I need to buy a replacement the next day bec I used it for work. I downloaded the Find iPhone apps and registered my stolen MBA. If I will erase MAC will it also erase the data of my new MBA?

did you turn 'find my mac' ON your MBA BEFORE your it was stolen? if not, you will not be able to do anything to the stolen MBA
if you did turn it on before it was stolen, yes it will erase everything on the MBA

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Working offline with data from Access 2010 web database

Hello all,
I have an Access 2010 web database that I have published to a SharePoint site. Users currently work with the data via one of several Access 2010 front end applications that simply have linked tables and client queires, forms and reports. On a couple
of occasions, we have had issues with our SharePoint site that have left users unable to access the data. A couple of times it was due to our site collection suddenly and inexplicably becoming read only and the last time (while I was on vacation, of course)
due to some license changes my folks were unable to access the site.
I'm getting ready to go on vacation again. What i would like to do is have a sort of emergency back up plan should things go awry again while I'm gone.
What I envision is a back up database that has actual data tables, rather than simply linked lists, that I can sync with my SharePoint lists on a regular basis. That way, should the SharePoint lists become inaccessible, users could continue to work with
the data offline and any changes can be synced once a connection is restored.
I have read through
this article, but in each scenario I was unable to actually open tables to work with the data once offline. Is this a situation where I should simply have folks work offline with a local copy containing all of the data and then republish? Or, is there
a way to simply sync? Any thoughts or suggestions would be appreciated. I'm really hoping to leave my laptop at home on this next trip.
Thanks,
Greg

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay, appreciate your patience.
Thanks
Daniel Yang
TechNet Community Support

Tables for Basic end date and work center for operation

Hi!
I need table name to fetch the basic end date of a maintenance order and maintenance work centers with respect to each operation in maintenance order.
Regards,
VM
Edited by: V M on Jul 20, 2010 7:22 AM
Edited by: V M on Jul 20, 2010 7:35 AM

Hi VM,
Input is Order Number (AUFNR).
You can find the Basic End date of Order in Table AFKO, filed is GLTRP.
For work center in Operations, you can use the Table AUFPL from AFKO.
Pass this AUFPL in AFVC and get the ARBID.
Then pass this ARBID to CRHD Table as OBJID, and get the work Center (ARBPL)
Regards,
MLN Prasad

Function Module for data retrival for work order clearence (WCA)

Hi All ,
Function Module for data retrival for work order clearence (WCA) for a particular Planning plant and (WCD's).
Thanks.

Hi Anne,
BAPI_PRODORD_GET_DETAIL
BAPI_PRODORD_GET_LIST
You can find further FM in Function Group COPRINT and CODR or take F4 on CO* in Function Group
These will serve your purpose.
Cheerz.
Ram

How come I have to off my Cellular Data for my Wi-Fi to work??

How come I have to off my Cellular Data for my Wi-Fi to work??

Off is off.
If you want the alrm to go off, the iphone must be on. It will be in sleep mode which saves battery.
The blackberry was simply on standby mode, not off. If it was off then the alrrm would not go off either.
Feel free to leave feedback for Apple. Let them know you want a stand by feature

ALE/iDoc for Work Center data transfer

Hello, community.
I am working on several interfaces for the PP and PM modules using iDocs/ALE.
One of the requirements is that only created and modified data must be distributed from R/3.
For Work Centers, we are using basic type LOIWCS02 and message type LOIWCS. We are generating iDocs through transaction POIM, which has two transfer modes: Complete (data for all Work Centers etc.) and Change (only new and updated data).
The Change Transfer Mode assumes you have set both Change Pointers and Change Documents for the objects to be transfered. Otherwise, it'll work just like the Complete Transfer Mode.
Our PP consultant told me there is no configuration to generate Change Documents for Work Center data modifications.
Can anybody give me other opinions? I'll resort to Z-table solutions only if I have no other options.

Hi Danilo,
Do you know what the process codes are for
LOIWCS and LOIROU ?
Appreciate your help.
Thanks,
Gopi.

Change log for work center data

Hi,
I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
Can anyone tell me as to why this is happening.
What I think is that some changes to the configuration are required in order to log the changes in the database.
Kindly help.
Regards
Varun

Hi Wolfgang,
Thanks for the information.
However i have another question.
The change table will have data only when it is activated in the configuration menu.
However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
See if you can help me on that.
Regards
Varun

Work Center Changes need data for previous and new work center

Hi All,
I have a requirement as the organisation is going through RESTRUCTURING. In ECC in Plant Maintainance they are changing Work Center. E.G.
Work Center OLD : ABC
Work Center NEW : XYZ
Now the requirement is I have data for ABC already coming in BI Prod. Env. Now when they will change ABC to XYZ the new data will come for XYZ.
Reporting Reqmt:
Data In Cube
Work Center     No. of Maintainence Orders
ABC                             10
XYZ                             20
When user run the report it should and gives input in Work Center variable as " XYZ" then
XYZ -- 30
Presently it is showing
ABC --10
XYZ --20
They have list of OLD Work Center mapping to NEW Work Center.
Now, Can anyone tell me is it possible to achive this scenario.
Thanks,
Mayank

Hi,
find the below link it has similar issue ,
Re: mapping between old/new material codes in BW
Regards,
Satya

I want to acquire data for multiple channels using PCI 6120 that works on traditional DAQ. I cannot access more than one channel, can someone help me or if someone has data acquisition vi for PCI 6120, please send me over . Thanks

I have PCI 6120 card and I want to acquire data for more than one channels. I'm using traditional DAQ to get it. But it does not work for more than one channels. If someone has a data acquisition vi for PCI 6120. Or some suggestion how to aquire data please let me know.
Thanks

Hello DSPGUY1,
You can definetly acquire from several channels. For your convenience, I have appended below the content from help that tells you how to configure it:
"channels specifies the set of analog input channels. The order of the channels in the scan list defines the order in which the channels are scanned during an acquisition. channels is an array of strings. You can use one channel entry per element or specify the entire scan list in a single element, or use any combination of these two methods. If x, y, and z refer to channels, you can specify a list of channels in a single element by separating the individual channels by commas, for example, x,y,z. If x refers to the first channel in a consecutive channel range and y refers to the last channel, yo
u can specify the range by separating the first and last channels by a colon, for example, x:y."
Hope this help.
Serges Lemo
Applications Engineer
National Instruments

Snapshot data for working offline

Similar Messages

Maybe you are looking for