SnapShot not working
Snapshot is not working anymore for Asus Transformer 101 Android 4
Windows 8, Chrome 23
Hello Mark,
It seems that it now works again. But before if you wanted to know, was that the transfering of the image seemed to fail, as the image located in the folder was 0kb
The mobile device took a picture, but the transfer loader was continuously rotating, which you can click on cancel, to cancel the transfer.
It worked on all other android devices. So maybe it was a local error?
Anyways this can be marked as resolved, thanks for your help.
Similar Messages
-
AE cs5 snapshot not working on Mavericks
Im running AE cs5 on a mac and since upgrading to Mavericks the snapshot function in after effects does not work.
After taking a snapshot, it does not display when you click and hold on 'Show snapshot' button.
My specs:
OSX 10.9.4
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970M 2048 MB
Any help, would be great!Mac OSX 10.9 is not on the list of supported operating systems for CS5:
http://helpx.adobe.com/after-effects/system-requirements.html#main_After_Effects_CS5_syste m_requirements
I would be unsurprised to find that's not the only issue with Mavericks and such an old version of After Effects.
On the off chance that this fixes it, try this: fixing permissions problem that impedes start of Adobe applications
Permissions are often messed up when upgrading Mac OSX (this was especially a problem with 10.9 and 10.10). -
I've read Pondini's articles on this but I still can't work out why Time Machine isn't creating local snapshots of my machine. I have 72GB of 500GB free on my HDD which is definitely over the 10% threshold needed for local snapshots to work (I think) so I don't know why it isn't working.
Any suggestions or help would be very much appreciated.
Thanks!Linc Davis wrote:
When the disk’s free space is less than 20% of its total available space, Time Machine removes snapshots starting with the oldest one first, and working toward the newest one. If enough space becomes free so that the disk’s free space is more than 20% of its total available space, Time Machine stops removing snapshots.
If the disk’s free space falls below 10% of its total available space, or is less than 5 GB, the task of removing snapshots will be given high priority on your Mac. When free space is between 10%–20% of total available space, removal continues at a lower priority.
If Time Machine is unable to free up enough space to get above the 10% or 5 GB threshold, Time Machine removes all snapshots except the current one, and stops creating new snapshots. Once free space rises above the 10% / 5 GB threshold, a new snapshot is created, and the previous one is removed.
That wording is inconsistent, and is also repeated in the Help. Part of it is left over from early Lion seeds, when the threshold was 20% for small volumes and 10% for larger ones. Bug reports have been filed to get it corrected, but so far there's been no response.
* The first paragraph says snapshots will be removed until there's 20% free.
* The second paragraph says that between 10% and 20%, removal will continue.
* The third paragraph, however, says the threshold is 10% or 5 GB. -
Local snapshots not working in Lion after restore from TM
After some problems I must restore my MB Pro from TM backup (fresh Lion install and then restore from TM using User Migration tool).
From that point I can't get "local snapshot" working. Normal Time Machine backups are working OK (I must did new complet backup after restore) when I'm connected to my home network, but I can't see any local backups in "Star Wars" view. "Star Wars" view is not accessible when I'm not connected to my TM drive.
When I open /Volumes/MobileBackups folder in Finder, I can see MobileBackup volume mounted, but it have name coded in some hash (3lvtSzcL34......). Inside of this volume is standard /Backups.backupdb/[Computer Name]/.. structure, but with only one snapshot with date and time when I restored my MB Pro from backup.
I was looking online bud didn't find any info, how to get it wokrs again.
What I already tried?
- repair disk permissions - didn't help at all, only 5-8 permissions were wrong on some Java Library
- disabling and re-enabling TM - no change. After disabling TM, MobileBackups volume is unmounted, mounted again after enabling but with different hash name
- manualy turn local snapshots on/off - using tmutil enablelocal/disablelocal have same effect as above
Is there any way how to delete current MobileBackup volume so it can be created again?Your best bet is to install iWork '09 the same way you did originally, if that was a download and install package or a disk. Once we got into the era of the App Store, things became more difficult. If that's the case for you, you could contact App Store support, I suppose, and see what they recommend.
If all else fails and having iWork '09 is really important to you, you could purchase a disk from Amazon at a very reasonable price.
Jerry -
Xcode snapshots not working?
My snapshots are not restoring even though they say they are. My code is not changing and all the errors are still there. I'm panicking because this app may be a goner if I can't undo some of the things I did.
Did you ever find a solution to this?
I have the same issue. -
Xrm.Page Script Snapshot - Not Working
I've installed the 2011 CRM SDK and am trying to go through the steps listed in the Read Me Word Document but I am hung up now. When I click the Xrm.Page Snap Shot I get the Dialog however when I click Get Data, It looks like it does something for a second
but I never get the data to copy and paste also the copy to clip board button does not show up. Been fighting with this for a few hours now, I've tried to re-install a few times but still no success.I have been able to make some progress I found that it works on entities with a sprocket icon but not on entities that have a brown folder in front of some pages, I'm not sure what the entity types mean. If anyone can shed some light.
Michael -
Live snapshots not working in 3.0.3
Please help. I have read that live snapshots are possible in Oracle VM 3.0.3.
Simply do a clone of a running VM.
But everytime I try this I get an error saying that it can't clone a live running VM.
Please let me know what i am doing wrong.
Thanks,
Vinceekrengel wrote:
I am also unable to clone a live vm or virtual disk, and I am using fiber channel storage.What version of Oracle VM are you running? Does your VM have any physical disks attached? I believe a Live Clone is only available if the VM only has virtual disk images or if you're using a Storage Connect Plugin to a SAN that can do hot clones of physical LUNs. -
Sp_addscriptexec is not working with FTP Snapshot delivery
Hi,
We have a SQL Server Merge Replication topology. Both Publisher a Subscribers are using SQL Server 2012.
As I have seen in http://msdn.microsoft.com/en-us/library/ms174360(v=sql.120).aspx
"Using sp_addscriptexec to
post a script file for publications using FTP for snapshot delivery is only supported for Microsoft SQL Server Subscribers."
So we should be OK...
The problem is that the Merge Agent is looking for the Script in the local PC instead of download it form the
FTP Server.
Here is the Code at the publisher:
exec sp_addscriptexec 'IPoint_Pub','C:\IPoint_Files\ReplicationScripts\User\reIndex.sql'
This is how the subscription was created:
use IPoint
exec sp_addmergepullsubscription @publisher = @Central_Server_Name, @publication = N'IPoint_Pub', @publisher_db = @MGR_DB, @subscriber_type = N'Local', @subscription_priority = 0, @description = N'', @sync_type = N'Automatic'
exec sp_addmergepullsubscription_agent
@publisher = @Central_Server_Name,
@publisher_db = @MGR_DB,
@publication = N'IPoint_Pub',
@distributor = @Central_Server_Name,
@distributor_security_mode = 0, @distributor_login = 'XXX', @distributor_password = 'XXX',
@enabled_for_syncmgr = N'True',
@frequency_type = 4, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 1, @frequency_subday = 4, @frequency_subday_interval = 3, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 20100527, @active_end_date = 99991231,
@alt_snapshot_folder = N'', @working_directory = N'',
@use_ftp = N'True',
@job_login = null, @job_password = null,
@publisher_security_mode = 0, @publisher_login = 'XXX', @publisher_password = 'XXX',
@use_interactive_resolver = N'False', @dynamic_snapshot_location = null, @use_web_sync = 0,
@hostname =@SUCURSAL_ID
GO
And the log of the REPLMERG.EX
2014-03-29 13:01:49.009 Microsoft SQL Server Merge Agent 11.0.2100.60
2014-03-29 13:01:49.009 Copyright (c) 2008 Microsoft Corporation
2014-03-29 13:01:49.009
2014-03-29 13:01:49.009 The timestamps prepended to the output lines are expressed in terms of UTC time.
2014-03-29 13:01:49.009 User-specified agent parameter values:
-Publication Netul_Pub
-Publisher SRV01
-Subscriber NETUL-01\SQLEXPRESS
-Distributor SRV01
-PublisherDB IPoint_Netul
-SubscriberDB IPoint
-SubscriptionType 1
-ParallelUploadDownload 1
-DistributorLogin sucursal
-DistributorPassword **********
-DistributorSecurityMode 0
-PublisherLogin sucursal
-PublisherPassword **********
-PublisherSecurityMode 0
-SubscriberSecurityMode 1
-OutputVerboseLevel 1
-Validate 0
2014-03-29 13:01:49.019 Connecting to Subscriber 'NETUL-01\SQLEXPRESS'
2014-03-29 13:01:50.654 Connecting to Distributor 'SRV01'
2014-03-29 13:01:51.599 Initializing
2014-03-29 13:01:51.604 Validating publisher
2014-03-29 13:01:51.614 Connecting to Publisher 'SRV01'
2014-03-29 13:01:51.769 Retrieving publication information
2014-03-29 13:01:51.774 Retrieving subscription information.
2014-03-29 13:01:52.294 Connecting to Subscriber 'NETUL-01\SQLEXPRESS'
2014-03-29 13:01:52.304 Connecting to Distributor 'SRV01'
2014-03-29 13:01:52.414 Initializing
2014-03-29 13:01:52.429 Validating publisher
2014-03-29 13:01:52.439 Connecting to Publisher 'SRV01'
2014-03-29 13:01:52.604 Retrieving publication information
2014-03-29 13:01:52.619 Retrieving subscription information.
2014-03-29 13:01:53.274 [29%] [0 sec remaining] Snapshot files will be downloaded via ftp
2014-03-29 13:01:53.284 [29%] [0 sec remaining] Snapshot will be applied from a compressed cabinet file
2014-03-29 13:01:53.294 [29%] [0 sec remaining] Connecting to ftp site 'SRV01.real2b.com'
2014-03-29 13:01:55.019 [33%] [2 sec remaining] Extracting snapshot file 'Documento_Formc3f5d2f9_190.sch' from cabinet file
2014-03-29 13:01:55.064 [33%] [2 sec remaining] Extracted file 'Documento_Formc3f5d2f9_190.sch'
2014-03-29 13:01:57.299 [33%] [2 sec remaining] Applied script 'Documento_Formc3f5d2f9_190.sch'
2014-03-29 13:01:57.304 [33%] [2 sec remaining] Preparing table 'Documento_Formulario_Otros' for merge replication
2014-03-29 13:02:02.574 [51%] [8 sec remaining] Extracting snapshot file 'sysmergesubsetfilters_Documento_Formulario_Otros90.bcp' from cabinet file
2014-03-29 13:02:02.594 [51%] [8 sec remaining] Extracted file 'sysmergesubsetfilters_Documento_Formulario_Otros90.bcp'
2014-03-29 13:02:02.604 [55%] [7 sec remaining] Bulk copying data into table 'sysmergesubsetfilters'
2014-03-29 13:02:02.609 [55%] [7 sec remaining] Bulk copied data into table 'sysmergesubsetfilters' (0 rows)
2014-03-29 13:02:02.619 [55%] [7 sec remaining] Extracting snapshot file 'Documento_Formc3f5d2f9_190.dri' from cabinet file
2014-03-29 13:02:02.624 [55%] [7 sec remaining] Extracted file 'Documento_Formc3f5d2f9_190.dri'
2014-03-29 13:02:02.864 [55%] [7 sec remaining] Applied script 'Documento_Formc3f5d2f9_190.dri'
2014-03-29 13:02:02.874 [59%] [6 sec remaining] Extracting snapshot file 'Documento_Formc3f5d2f9_190.trg' from cabinet file
2014-03-29 13:02:02.884 [59%] [6 sec remaining] Extracted file 'Documento_Formc3f5d2f9_190.trg'
2014-03-29 13:02:02.889 [62%] [5 sec remaining] Applied script 'Documento_Formc3f5d2f9_190.trg'
2014-03-29 13:02:02.899 [62%] [5 sec remaining] Extracting snapshot file 'Documento_Formc3f5d2f9_190.prc' from cabinet file
2014-03-29 13:02:02.919 [62%] [5 sec remaining] Extracted file 'Documento_Formc3f5d2f9_190.prc'
2014-03-29 13:02:03.819 [62%] [5 sec remaining] Applied script 'Documento_Formc3f5d2f9_190.prc'
2014-03-29 13:02:09.334 [74%] [5 sec remaining] Launching sqlcmd to apply the script 'Create_Categorias_Tables.sql'
2014-03-29 13:02:09.974 [74%] [5 sec remaining] Applied script 'Create_Categorias_Tables.sql'
2014-03-29 13:02:09.979 [77%] [4 sec remaining] Launching sqlcmd to apply the script 'Create_Categorias_Tables.sql'
2014-03-29 13:02:10.144 [77%] [4 sec remaining] Applied script 'Create_Categorias_Tables.sql'
2014-03-29 13:02:10.174 [81%] [3 sec remaining] Launching sqlcmd to apply the script 'reIndex.sql'
2014-03-29 13:02:10.189 [81%] [3 sec remaining] Last 115 characters in 'sqlcmd' output buffer: Sqlcmd: 'C:\inetpub\ftproot\ReplData\ftp\SRV01_IPOINT_NETUL_NETUL_PUB\UserScripts\reIndex.sql': Invalid filename.
2014-03-29 13:02:10.194 [81%] [3 sec remaining] Failed to apply the script 'reIndex.sql' using the 'sqlcmd' utility.
2014-03-29 13:02:10.204 The schema script 'reIndex.sql' could not be propagated to the subscriber.
2014-03-29 13:02:10.254 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The schema script 'reIndex.sql' could not be propagated to the subscriber.
2014-03-29 13:02:10.259 [100%] The process was successfully stopped.
2014-03-29 13:02:10.299 Category:NULL
Source: Merge Replication Provider
Number: -2147200963
Message: The process was successfully stopped.
As you can see, the FTP snapshot is working fine
"Extracted Documento_Formc3f5d2f9_190.trg"
But the it is looking for a file that only exists in the server.
'C:\inetpub\ftproot\ReplData\ftp\SRV01_IPOINT_NETUL_NETUL_PUB\UserScripts\reIndex.sql'
Do you have any idea?
Best Regards, Daniel.Hi again Brandon,
I understand what you are saying and I know it would solve the problem, but it's now our case.<o:p></o:p>
We have other installations with Merge Replication using a shared path (UNC) to download the initial snapshot and every user script is downloaded also from
de shared location fine.<o:p></o:p>
In this case,
we have no direct access to a shared folder in server. The full replication process is done by internet without VPN.<o:p></o:p>
I think the “Snapshot folder” it's well configured as the snapshot it’s being downloaded OK from the
FPT Server.<o:p></o:p>
My question is: Why the merge agent connects to the FPT server for download de Snapshot but it does not do the same to download the user script??<o:p></o:p>
May be it’s a bug in the Merge Agent or some parameter I am not passing?<o:p></o:p>
This is the merge agent invocation:<o:p></o:p>
REPLMERG.EXE -Publication %Publication% -Publisher %Publisher% -Subscriber %Subscriber% -Distributor %Publisher% -PublisherDB %PublicationDB% -SubscriberDB %SubscriptionDB% -SubscriptionType 1 -ParallelUploadDownload 1 -DistributorLogin %user% -DistributorPassword %password% -DistributorSecurityMode 0 -PublisherLogin %user% -PublisherPassword %password% -PublisherSecurityMode 0 -SubscriberLogin %user% -SubscriberPassword %password% -SubscriberSecurityMode 1 -OutputVerboseLevel 1 -Validate 0
Best Regards, Daniel. -
My Acrobat Snapshot function is not working?
My Acrobat Snapshot function is not working?
No security and Acrobat 9 Standard
Michael A. Lough
Sent: Friday, July 22, 2011 8:49 PM
Subject: Acrobat Windows My Acrobat Snapshot function is not working?
Is security set on the PDF? What version of Acrobat? -
Application is not working in Different environments
Hi Experts,
I am working in jdev 11.1.1.3.0 with ADF BC
I have deployed my application in 1 environment it's working fine, the same application i depoyed in another environment it's not working.
in the log i am getting as
<Started WebLogic Managed Server "CardEmbosser_ms2" for domain "WLINTQA1" running in Production Mode>
<Sep 15, 2010 10:31:27 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Sep 15, 2010 10:31:27 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Sep 15, 2010 10:36:12 AM EDT> <Notice> <StdErr> <BEA-000000> <Sep 15, 2010 10:36:12 AM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Application ID : CardEmbossNewUI#V2.0>
<Sep 15, 2010 10:36:13 AM EDT> <Notice> <StdErr> <BEA-000000> <Sep 15, 2010 10:36:13 AM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Metadata Services: Metadata archive (MAR) not found.">
<Sep 15, 2010 10:36:33 AM EDT> <Notice> <StdErr> <BEA-000000> <Sep 15, 2010 10:36:33 AM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Mojarra (1.2_09-20081212-SNAPSHOT) for context '/CardEmbossNewUI'>
<Sep 15, 2010 10:37:01 AM EDT> <Notice> <StdErr> <BEA-000000> <Sep 15, 2010 10:37:01 AM oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl getNonCachedConnectionsContext
INFO: Registering Connection Runtime MBean>
<Sep 15, 2010 10:37:04 AM EDT> <Notice> <StdErr> <BEA-000000> <Sep 15, 2010 10:37:04 AM oracle.adf.share.jndi.ReferenceStoreHelper getReferencesMapEx
WARNING: Incomplete connection reference object for connection:Apps>
<Sep 15, 2010 10:38:01 AM EDT> <Notice> <StdErr> <BEA-000000> <Sep 15, 2010 10:38:01 AM oracle.jbo.uicli.mom.CpxUtils$Visitor logMainApplicationCpx
INFO: zip:/opt/oracle/domains/WLINTQA1/servers/CardEmbosser_ms2/tmp/_WL_user/CardEmbossNewUI_V2.0/jk9b9a/war/WEB-INF/lib/_wl_cls_gen.jar!/view/DataBindings.cpx>
Can any one suggest me what is wrong here.Error which i am getting while going from one page to another page is:
<Sep 16, 2010 8:58:36 AM EDT> <Notice> <StdErr>
<BEA-000000> <Sep 16, 2010 8:58:36 AM oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator handleError
SEVERE: Server Exception during PPR, #15
javax.servlet.ServletException: java.lang.NoClassDefFoundError: javax/faces/webapp/UIComponentTag$UIComponentTagAdapter
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:341)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.executeExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NoClassDefFoundError: javax/faces/webapp/UIComponentTag$UIComponentTagAdapter
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator._evaluate(FacesExpressionEvaluator.java:58)
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator.evaluate(FacesExpressionEvaluator.java:36)
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator._evaluate(FacesExpressionEvaluator.java:79)
at oracle.adfinternal.view.faces.model.FacesExpressionEvaluator.evaluate(FacesExpressionEvaluator.java:36)
at oracle.adf.model.binding.DCUtil.elEvaluate(DCUtil.java:796)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1452)
at oracle.adf.model.binding.DCBindingContainer.evaluateParameter(DCBindingContainer.java:1501)
at oracle.adf.model.binding.DCParameter.internalEvaluateExpresion(DCParameter.java:202)
at oracle.adf.model.binding.DCParameter.evaluateValue(DCParameter.java:76)
at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:111)
at oracle.jbo.uicli.binding.JUSearchBindingCustomizer.getCriteriaName(JUSearchBindingCustomizer.java:1956)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding._getCurrentViewCriteriaName(FacesCtrlSearchBinding.java:3600)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.getQueryDescriptor(FacesCtrlSearchBinding.java:153)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.internalGet(FacesCtrlSearchBinding.java:3414)
at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
at javax.el.MapELResolver.getValue(MapELResolver.java:164)
at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
at com.sun.el.parser.AstValue.getValue(AstValue.java:118)
at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:192)
at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:68)
at org.apache.myfaces.trinidad.component.UIXComponentBase.getProperty(UIXComponentBase.java:1197)
at oracle.adf.view.rich.component.UIXQuery.getValue(UIXQuery.java:442)
at oracle.adf.view.rich.component.UIXQuery._setupAndStoreContextInRequest(UIXQuery.java:267)
at oracle.adf.view.rich.component.UIXQuery.invokeOnComponent(UIXQuery.java:157)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnNamingContainerComponent(UIXComponentBase.java:1383)
at oracle.adf.view.rich.component.fragment.UIXRegion.invokeOnComponent(UIXRegion.java:544)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at oracle.adf.view.rich.component.fragment.UIXInclude.invokeOnComponent(UIXInclude.java:141)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1333)
at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1427)
at oracle.adf.view.rich.component.rich.RichDocument.invokeOnComponent(RichDocument.java:161)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:675)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._fixClientIds(LifecycleImpl.java:925)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:378)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
... 34 more
Caused by: java.lang.ClassNotFoundException: javax.faces.webapp.UIComponentTag$UIComponentTagAdapter
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177)
at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:37)
... 106 more>
Can any one help me, it's very urgent for me, what may be the issue here. -
[Solved] Suspend not working on Asus N82JV / USB 3.0
*Solved* Turns out you just have to create a file in /etc/pm/config.d with the following text: SUSPEND_MODULES="xhci-hcd ehci-hcd". Voilá. Suspend to ram works by a) sudo pm-suspend b) Ordering KDE to suspend c) Fn+F1.
I've been trying to figure this out for some time now.
I've managed to get suspending to disk working, using hibernate-script with USuspendMethod disk. I had to blacklist xhci_hcd (usb 3.0) in order for it to work.
I already tried pretty much every s2ram combination as described here, even though I haven't yet tried the booting with minimal environment part.
Every combination ends up complety locking the system, with no possibility of ctrl+alt+fx or even ctrl+alt+del. Just hangs 'forever'.
/etc/suspend.conf
snapshot device = /dev/snapshot
resume device = /dev/sda7
#image size = 350000000
suspend loglevel = 2
compute checksum = y
compress = y
#encrypt = y
#early writeout = y
#splash = y
shutdown method = shutdown
/etc/hibernate/common.conf
# Configuration options common for suspending to disk or RAM.
# Options are not case sensitive.
# See hibernate.conf(5) for help on the configuration items.
### Some global settings
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 3
#LogTimestamp yes
AlwaysForce yes
# AlwaysKill yes
# HibernateVT 15
Distribution arch
# XDisplay :0
### Scriptlets
### Scriptlets provide support for doing all sorts of things before and after
### suspending. The defaults settings here should work for most people, but
### you may wish to edit these to taste. Consult "hibernate -h" for help on
### the configuration settings.
### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg
### clock
SaveClock restore-only
#DirectIsa
### devices
# IncompatibleDevices /dev/dsp /dev/video*
### diskcache
# DisableWriteCacheOn /dev/hda
### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme tuxonice
### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
# UnmountFSTypes smbfs nfs
# UnmountGraceTime 1
# Mount /windows
### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak
# see http://bugs.debian.org/317479
# RemountXFSBoot yes
### hardware_tweaks
# IbmAcpi yes
# RadeonTool yes
# Runi915resolution yes
FullSpeedCPU yes
### lilo
# EnsureLILOResumes yes
### lock (generally you only want one of the following options)
## For console you need vlock available.
## For x you need xscreensaver-command-command available.
## For gnome you need gnome-screensaver-command available.
## For kde you need dcop, kscreensaver available.
## For XAuto you need xautolock available.
## For Xtr you need xtrlock available.
## For Freedesktop (for example KDE4) you need dbus-send available
# LockConsoleAs root
# LockXScreenSaver yes
LockGnomeScreenSaver yes
# LockFreedesktop
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes
# LockXtrLock yes
### misclaunch
# OnSuspend 20 echo "Good night!"
# OnResume 20 echo "Good morning!"
### modules
# UnloadModules snd_via82cxxx usb-ohci
# UnloadAllModules yes
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules
### modules-gentoo
# GentooModulesAutoload yes
### network
# DownInterfaces eth0
# UpInterfaces auto
### networkmanager
EnableNMReconnect yes
### pause_audio
# MuteAudio yes
# PauseAudio yes
### pcmcia
# EjectCards yes
### programs
# IncompatiblePrograms xmms
### services
# RestartServices laptop_mode anacron
# StopServices alsasound
# StartServices aumix
### vbetool
# EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes
### xhacks
SwitchToTextMode yes
# UseDummyXServer yes
# DummyXServerConfig xorg-dummy.conf
### xstatus
## This can be set to gnome, kde or x:
## For gnome you need zenity available.
## For kde you need dcop, kstart, kdialog available.
## For x you need to have xosd OR xmessage available.
# XStatus gnome
# XmessageDisable yes
# XSuspendText Preparing to suspend...
# XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font '-misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-*' --colour=Green --shadow 1 --pos bottom --align center --offset 50
### xbacklight
# BackLight yes
### gaim
## You need to have dbus, gaim_remote available.
# LogoutGaim yes
# GaimRestoreStatus yes
# GaimLogoutMessage Hibernating
# GaimLoginMessage Back from hibernation
### pidgin
# LogoutPidgin yes
# PidginRestoreStatus yes
# PidginLogoutMessage Hibernating - bye!
# PidginLoginMessage I'm back!
### SSH and PGP keys
# AgentsClearGPG yes
# AgentsClearSSH yes
### Virtualbox
# SuspendVirtualbox yes
### Dropping disk caches
# As a way to speed up suspending, you can free the memory used for disk caches so there will be less to write to the disk. The downside is the risk of crashing your system. but I have had no trouble with it so far, while reducing the size of the suspended image by half.
#OnSuspend 00 sync; echo 3 > /proc/sys/vm/drop_caches
/etc/hibernate/ususpend-ram.conf
# This file is used when suspending to RAM using the uswsusp functionality in
# the kernel. You will require the s2disk binary to be installed - this can be
# downloaded from http://suspend.sourceforge.net/ . On Debian systems, just
# install the uswsusp package.
# Add any configuration options specific to ususpend to this file. Ordering is
# not crucial, and options are not case-sensitive.
# See hibernate.conf(5) for help on the configuration items.
USuspendMethod ram
## if needed, pass the -f option to s2ram
USuspendRamForce yes
## if s2ram is unsure, let it use system-specific options instead of having to
## force it.
#USuspendRamUnsureOk yes
## if needed, pass the -m option to s2ram
## (-m should be used instead of -s, if possible; see
## https://bugzilla.novell.com/show_bug.cgi?id=229603)
USuspendRamVbeMode yes
## if needed, pass the -s option to s2ram
## (if possible, prefer -m to -s; see above)
# USuspendRamVbeSave yes
## if needed, pass the -p option to s2ram
# USuspendRamVbePost yes
## if needed, pass the -a option to s2ram
## (Intel users see: http://en.opensuse.org/S2ram#Intel_Graphics_Chipsets)
USuspendRamAcpiSleep 3
## if needed, pass the -v option to s2ram
USuspendRamPciSave yes
## if needed, pass the -r option to s2ram
# USuspendRamRadeontool yes
Include common.conf
Here's the output from /var/log/hibernate.conf, from when I try hibernate -F /etc/hibernate/ususpend-ram.conf
Starting suspend at Seg Ago 16 22:38:02 WEST 2010
hibernate: [01] Executing CheckLastResume ...
hibernate: [01] Executing CheckRunlevel ...
hibernate: [01] Executing LockFileGet ...
hibernate: [01] Executing NewKernelFileCheck ...
hibernate: [10] Executing EnsureUSuspendCapable ...
hibernate: [11] Executing XHacksSuspendHook1 ...
hibernate: [59] Executing RemountXFSBootRO ...
hibernate: [61] Executing NMSuspend ...
Putting NetworkManager to sleep
hibernate: [89] Executing SaveKernelModprobe ...
Saved /proc/sys/kernel/modprobe is /sbin/modprobe
hibernate: [91] Executing LockGnomeScreensaver ...
hibernate: [91] Executing ModulesUnloadBlacklist ...
Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules
Module version for ipw2100 is 66050
Module version for ipw2200 is 66050
Module version for snd_bt_sco is
Module version for ndiswrapper is
Unloading blacklisted module uvcvideo (and dependencies)
Unloading uvcvideo ...
Removing modules with rmmod.
Unloading blacklisted module xhci_hcd (and dependencies)
Unloading xhci_hcd ...
hibernate: [95] Executing XHacksSuspendHook2 ...
xhacks: changing console from 7 to 15
hibernate: [98] Executing CheckRunlevel ...
hibernate: [98] Executing FullSpeedCPUSuspend ...
Switched to performance, with min freq at 2267000
Switched to performance, with min freq at 2267000
Switched to performance, with min freq at 2267000
Switched to performance, with min freq at 2267000
hibernate: [99] Executing DoUSuspend ...
hibernate: Running /usr/sbin/s2ram -f -m -a 3 -v...
lspci
spci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
01:00.0 VGA compatible controller: nVidia Corporation Device 0caf (rev ff)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 USB Controller: NEC Corporation Device 0194 (rev 03)
05:00.0 Ethernet controller: Atheros Communications Device 1063 (rev c0)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
lsusb
Bus 002 Device 003: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod
Module Size Used by
cryptd 6246 0
aes_x86_64 7396 1
aes_generic 26154 1 aes_x86_64
acpi_call 1712 0
ipv6 280376 32
usb_storage 42628 0
uvcvideo 59687 0
videodev 39355 1 uvcvideo
v4l1_compat 15554 2 uvcvideo,videodev
v4l2_compat_ioctl32 10681 1 videodev
snd_hda_codec_intelhdmi 10070 1
snd_hda_codec_realtek 267731 1
snd_seq_oss 29920 0
snd_seq_midi_event 5420 1 snd_seq_oss
snd_seq 51394 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 5469 2 snd_seq_oss,snd_seq
snd_hda_intel 21906 2
snd_hda_codec 76787 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6286 1 snd_hda_codec
snd_pcm 71781 2 snd_hda_intel,snd_hda_codec
asus_laptop 14339 0
sparse_keymap 2547 1 asus_laptop
wmi 5925 0
nouveau 523432 0
snd_timer 19820 2 snd_seq,snd_pcm
ac 3089 0
battery 10055 0
thermal 12258 0
ttm 45713 1 nouveau
snd 58291 13 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7233 2 snd_hda_intel,snd_pcm
arc4 1362 2
ecb 1993 2
joydev 9863 0
xhci_hcd 45124 0
ath9k 72182 0
ath9k_common 2529 1 ath9k
iTCO_wdt 10669 0
iTCO_vendor_support 1849 1 iTCO_wdt
mac80211 182919 2 ath9k,ath9k_common
ath9k_hw 216824 2 ath9k,ath9k_common
ath 8790 2 ath9k,ath9k_hw
cfg80211 141632 4 ath9k,ath9k_common,mac80211,ath
rfkill 15518 2 asus_laptop,cfg80211
led_class 2347 2 asus_laptop,ath9k
atl1c 31680 0
i2c_i801 8598 0
ehci_hcd 36042 0
usbcore 145453 5 usb_storage,uvcvideo,xhci_hcd,ehci_hcd
cpufreq_powersave 942 0
psmouse 53592 0
cpufreq_ondemand 7990 4
sg 25328 0
acpi_cpufreq 6491 1
freq_table 2339 2 cpufreq_ondemand,acpi_cpufreq
evdev 8775 16
serio_raw 4470 0
pcspkr 1803 0
processor 29040 5 acpi_cpufreq
fuse 59417 7
soundcore 6089 1 snd
rtc_cmos 8886 0
rtc_core 14439 1 rtc_cmos
rtc_lib 1882 1 rtc_core
ext4 330125 1
mbcache 5762 1 ext4
jbd2 75607 1 ext4
crc16 1281 1 ext4
sr_mod 14842 0
cdrom 35809 1 sr_mod
sd_mod 27923 5
ahci 36972 4
libata 155099 1 ahci
scsi_mod 94212 5 usb_storage,sg,sr_mod,sd_mod,libata
i915 296298 2
drm_kms_helper 23740 2 nouveau,i915
drm 162265 5 nouveau,ttm,i915,drm_kms_helper
i2c_algo_bit 5071 2 nouveau,i915
button 4818 2 nouveau,i915
i2c_core 18364 7 videodev,nouveau,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 19077 1 i915
output 1956 1 video
intel_agp 29074 2 i915
Am I missing something? Is it another module? Some hardware that's causing this? The only other odd hardware configuration, other than USB 3.0 is the dual graphic cards (Nvidia Optimus). The Nvidia is powered down, though (tried both ways).
Note: The default suspend system doesn't work, it just locks the screen (if in gnome/kde/whatever)
Last edited by Xehoz (2010-11-25 23:37:14)Looke like tripplec has this right. From http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD024298
Notes:
ThinkPad T420, T420s and T520 models, USB 3.0 port on the Mini Dock Series 3 with USB 3.0 will function as a USB 2.0 port.
Thinkpad T430, T430s and T530 models on the Mini Dock Series 3 with USB 3.0 will function as a USB 3.0 port.
The functionality of the T420, T420s and T520 is a limitation of the Intel Chipset not a defect in either the Thinkpad or Mini Dock Series 3 with USB 3.0
I don't see that on the sales page. Only found it by searching on the part number
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
VPN not working after Update from SLS to MLS
Hi folks,
last weekend I updated my Snow Leopard Server following the suggested procedure, installed first Mountain Lion and then OS X Server. Now I have a problem.
Setup:
- Macmini Server located in my private LAN, running SLS as a virtual machine (VMware)
- connected to the Internet via an AVM FritzBox 7270
For HTTP (80) and VPN (500, 1701 and 4500) the ports are forwarded to the virtual machine - everything was working well before the update (access to Website & VPN from both internal and external). The VPN connection is used either with an iPhoen or with my Macbook pro.
The website is still working like expected. VPN service is not working properly anymore. I can access it from internal, but not from external.
So, to make it clear, nothing but the server OS changed in the setup.
Any ideas? Changed ports from 10.6 to 10.8?
Thanks in advance,
Andre
(err, and YES, I have a snapshot of 10.6. - if I revert it's working again, but this can't be the solution)Hi all,
to point out the difference, this is what the logs say....
Connecting from internal, VPN success:
21.06.13 18:12:13,880
racoon[226]
IPSec Phase1 started (Initiated by peer).
21.06.13 18:12:13,882
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 1).
21.06.13 18:12:13,883
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 2).
21.06.13 18:12:13,921
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 3).
21.06.13 18:12:13,942
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 4).
21.06.13 18:12:13,969
racoon[226]
IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
21.06.13 18:12:13,969
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 5).
21.06.13 18:12:13,970
racoon[226]
IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
21.06.13 18:12:13,970
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 6).
21.06.13 18:12:13,970
racoon[226]
IPSec Phase1 established (Initiated by peer).
21.06.13 18:12:14,881
racoon[226]
IPSec Phase2 started (Initiated by peer).
21.06.13 18:12:14,881
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 1).
21.06.13 18:12:14,881
racoon[226]
IKE Packet: transmit success. (Responder, Quick-Mode message 2).
21.06.13 18:12:14,885
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 3).
21.06.13 18:12:14,886
racoon[226]
IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
21.06.13 18:12:14,886
racoon[226]
IPSec Phase2 established (Initiated by peer).
21.06.13 18:12:14,890
vpnd[1210]
Incoming call... Address given to client = 192.168.0.203
21.06.13 18:12:14,918
pppd[1371]
pppd 2.4.2 (Apple version 596.13) started by root, uid 0
21.06.13 18:12:14,923
pppd[1371]
L2TP incoming call in progress from '192.168.0.117'...
21.06.13 18:12:14,931
pppd[1371]
L2TP connection established.
21.06.13 18:12:14,935
pppd[1371]
Connect: ppp1 <--> socket[34:18]
21.06.13 18:12:14,944
UserEventAgent[17]
Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
21.06.13 18:12:15,036
pppd[1371]
CHAP peer authentication succeeded for <username>
21.06.13 18:12:15,042
pppd[1371]
DSAccessControl plugin: User '<username>' authorized for access
21.06.13 18:12:15,052
pppd[1371]
Unsupported protocol 0x8057 received
21.06.13 18:12:15,058
pppd[1256]
l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:15,058
pppd[1371]
local IP address 192.168.0.103
21.06.13 18:12:15,059
pppd[1371]
remote IP address 192.168.0.203
21.06.13 18:12:15,061
pppd[1371]
l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:15,068
configd[21]
network changed: v4(en0:192.168.0.103, ppp0, ppp1+:192.168.0.103) DNS* Proxy SMB
21.06.13 18:12:17,102
apsd[466]
Certificate not yet generated
21.06.13 18:12:18,103
apsd[466]
Certificate not yet generated
21.06.13 18:12:19,004
apsd[466]
Couldn't find cert in response dict
21.06.13 18:12:19,006
apsd[466]
Failed to get client cert on attempt 11, will retry in 900 seconds
21.06.13 18:12:19,066
racoon[226]
IKE Packet: transmit success. (Information message).
21.06.13 18:12:19,067
racoon[226]
IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA).
21.06.13 18:12:19,120
apsd[466]
Certificate not yet generated
21.06.13 18:12:21,802
pppd[1256]
l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:21,817
pppd[1371]
l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:21,822
configd[21]
network changed: v4(en0:192.168.0.103, ppp0, ppp1-:192.168.0.103) DNS* Proxy SMB
21.06.13 18:12:21,981
pppd[1371]
Fatal signal 6
21.06.13 18:12:21,982
racoon[226]
IKE Packet: receive success. (Information message).
21.06.13 18:12:22,011
vpnd[1210]
--> Client with address = 192.168.0.203 has hungup
21.06.13 18:12:22,022
UserEventAgent[17]
Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
21.06.13 18:12:23,837
apsd[466]
Certificate not yet generated
21.06.13 18:12:23,839
apsd[466]
Certificate not yet generated
21.06.13 18:12:25,148
apsd[466]
Couldn't find cert in response dict
21.06.13 18:12:25,148
apsd[466]
Failed to get client cert on attempt 12, will retry in 900 seconds
21.06.13 18:12:25,845
apsd[466]
Certificate not yet generated
Connecting from external, VPN fail:
21.06.13 18:10:52,533
racoon[226]
Connecting.
21.06.13 18:10:52,533
racoon[226]
IPSec Phase1 started (Initiated by peer).
21.06.13 18:10:52,535
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 1).
21.06.13 18:10:52,536
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 2).
21.06.13 18:10:52,692
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 3).
21.06.13 18:10:52,713
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 4).
21.06.13 18:10:52,882
racoon[226]
IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
21.06.13 18:10:52,882
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 5).
21.06.13 18:10:52,882
racoon[226]
IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
21.06.13 18:10:52,883
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 6).
21.06.13 18:10:52,883
racoon[226]
IPSec Phase1 established (Initiated by peer).
21.06.13 18:10:53,412
racoon[226]
Connecting.
21.06.13 18:10:53,413
racoon[226]
IPSec Phase2 started (Initiated by peer).
21.06.13 18:10:53,413
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 1).
21.06.13 18:10:53,414
racoon[226]
IKE Packet: transmit success. (Responder, Quick-Mode message 2).
21.06.13 18:10:53,531
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 3).
21.06.13 18:10:53,532
racoon[226]
IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
21.06.13 18:10:53,532
racoon[226]
IPSec Phase2 established (Initiated by peer).
21.06.13 18:11:13,643
racoon[226]
IKE Packet: receive success. (Information message).
21.06.13 18:11:13,671
racoon[226]
IKE Packet: receive success. (Information message).
Hope you see more than me and can help... :-( -
Hi,
I updated my FireFox, and observed that tr:panelPopup stopped working. I search on google, and found that trinidad did fix this issue, and fix is included in Trinidad 1.2.13.
I removed Trinidad Runtime 11 library, and added trinidad-impl-1.2.13.jar, and trinidad-api-1.2.13.jar in my classpath. The panelpopup component start working, but it fills my log with warnings:
Trinidad's ViewHandler is registered more than once. To avoid initialization problems, make sure that only one Trinidad implementation jar is loadedI saw that trinidad jars are also loaded from oracle.adf.view_11.1.1, although in deployment setting those jars are not checked to be deployed.
So on next step I tried replacing trinidad jars in oracle.adf.view_11.1.1 directory inside Jdeveloper. This also didn't work.
weblogic.application.ModuleException: Failed to load webapp: '/'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:368)
java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)I also checked Jdev 11.1.1.2.0, and is containing version 1.2.12.1-SNAPSHOT not 1.2.13.
What are my options to use tr:panelpopup without having all those warning in my logs?
Thanks a lot, EnikoYes, this way would work for me. But what about the rest of users? Should I tell them not to use FFX 3.6 ? :)
Eniko -
Ichat - getting started for first time NOT Working ..please help
I opened the Ichat application for th every first time today. When I open the app a box pops up and asks you to enter your user name and password and with which type of account you want to log in with, etc. First, I chose my mobile me account ( I also have a mac.com account and teh same thing I am going to describe happens with it as well for it is not an apple id dependent problem). I do so and click continue. The next screen comes up in the box and it is titled " encrypted ". Then in the box it says you are now ready to use ichat" . At the bottom of the box it says click done to begin using ichat.
Thus, is my problem. There is no "done" option to click on. The only button options to click on are: "learn more" , "go back" or "continue" . If I click "continue" nothing happens and I cannot do anything or begin using ichat. If I like "learn more" nothing happes at all - thus, the same result as clicking "continue". If I click back it will goto the previous screens but nothing changes.
Has anyone experienced this before? It seems strange and odd for an apple software to be so deleterious. How do i fix it so I can use iChat?
Any help is greatly appreciated. Thank you in advance. JennaHi
Welcome to the Discussions
Unfortunately although very rare some people do find that iChat does this.
Do this first.
Open your Home Folder (Little House icon)
Go to the Preferences Folder within and then find all the com.apple.iChat(xxx).plist items and delete them.
Try iChat again.
You should see several Start Up Screens.
1) A Welcome Screen.
2) A Valid AIM name (Includes options for MobileMe and @mac.com as well as AIM) plus confirming your Name (Your name maybe Prefilled from the Address Book)
3) the Bonjour Enable (or not) screen.
4) The Jabber option (Includes GoogleTalk) This Screen includes options to change Server Names and Ports under the text fields for the Jabber ID.
5) A Video Preview pane. (You can use this to take a Snapshot for your Buddy Pic)
6) a Details of Accounts you have set up screen.
7) the Done Screen.
More on this with Pictures here
If this does not work we may have to get you to Reinstall iChat.
How much work this entails depends how far your OS has been updated above the Install Disk Level.
Could you tell me what OS version the Install Disk is (What came on your Computer when new) ?
And what OS level you are currently using ?
7:23 PM Friday; December 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Share Document Not Working?
Is Sharing not working? No one receives the Email invites and their entered Email address, after the invites were sent, are not listed anywhere as being currently shared. (using the desktop version which is online and shows green)
Hi,
I can understand that there are usability issue in Sharing feature. Currently, email notification is just for information. Once you share script with some one, he needs to login into Story, and then save script.
After login, the user can see notification of the shared script on the top bar in Projects view. The user then can can save the script and then can start working on the script.
Please find step by step procedures:
1. Owner (Say User1) shares the script with another user (say User2)
2. User2 received an email notification
3. User2 launch Story
4. User2 provides login and password
5. After login, user2 switches to "Projects view:
incase user2 opens "Home" Page then click on "Project" tab on the top left bar in the application
6. In the Projects view there is a mail icon, which will show all scripts (I also placed snapshot in this thread)
7. Now click on this icon, user2 can see notification of all shared scripts
8. Now user2 clicks on the script and save this script
9. Now user2 can start working on this script
Please let us know if you face any problem in this workflow. We would like to solve this problem and also try to find a way to make this feature user friendly.
Regards,
Neeraj Gupta
Maybe you are looking for
-
How to add custom authorization object to a SAP standard transaction
Hi All, I have a standard tcode IW22 (change PM Notification) and I would lock changing when some users modify the field Functional Location (field TPLNR). Since this field does not have an authorization object associated, I've tried to solve this pr
-
Finding the key according to string length in java.util.Properties
Finding the key according to string length in java.util.Properties. I know only String length only.
-
Unable to make in-app purchase
Hi. I have an iPhone 4, and I've never made an in-app purchase before, but I tried to make one recently and it wouldn't work. All I seem to get from the app whenever I try is an error message that says 'ERROR The transaction failed'. I contacted supp
-
7m/1m artboard in Illustrator CS6
Hi. I need to make a 7m x 1m outdoor banner. This is above the maximum size illustrator allows. How do I solve this? Is it ok if I make a 3.5m / 0.5m document and set double size when printing? I make vectorial design.
-
Searching for ABAP to download BW Process Chain (as txt / xls)
Dear all, Has somebody an ABAP to download BW Process Chain definitions as a TXT or XLS file (to local PC)? (and want's to share it... Best regards, Jos