Snaptu as a widget on one of my startscreens?

How do I get Snaptu as a widget on one of my startscreens?

you could also leave snaptu running in the background and switch to it but I find the shortcut option very useable as it loads quickly and would think a widget would be somewhat awkward due to the amount of links snaptu can use . If you want to constantly monitor so much info an rss feed is probably a better choice ?
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • Multiple Blog Summary Widgets on one page

    Hello
    I was wondering if anyone knew how to put multiple Blog Summary Widgets onto a single page? Basically having a single weblog page but hosting more than one blog on that page.
    If you do a simple copy and paste, it will pick up the "feed" from the Entries already associated with the existing blog. I have also tried pasting multiple widgets onto a blank page without success - I just get a 1 pixel line.
    What I have done with my site (http://www.kilayko.com) in the meantime is to create an iframe and then load the second blog there. The only potential downside is that surfers will stay in that frame.
    Any takers for this one, or is it just a happy limitation of iWeb?
    Alex
    Message was edited by: jkrupp

    just a bump.
    Message was edited by: jkrupp

  • How to move a widget from one section to another

    Hi, I try to move a widget from a page of a section to another page by using copy and paste but it doesn't work.
    I hear only a short sound, when I press cmd+v. I think it must be possible to move widgets to other places or to copy them.
    Please help me. Thanks!

    Try creating a new one like it, then copy/paste the existing one onto it.

  • Error with multiple widgets on one page (Firefox only)

    Hi
    I have developed a website in iWeb 09 and have experienced errors when i put more than one widget on a page (second widget always errors out). To date i have just stuck to a limit of 1 per page - but now I want to have two widgets on my home page (google map and a facebook widget)
    The page is www.bikesatbrighton.com.au and the two widgets are working in Safari and Explorer, but not in Firefox. I have checked that there are no overlapping frames / widgets etc but have not been able to fix the problem.
    Any assistance would be greatly appreciated. Any other general comments about the webpage would also be welcomed.
    Cheers
    Travis

    Welcome to the Apple Discussions. Is it the page that you provided the link to or a second page. I see no problem with that first link in FireFox 3.6.12 and 4.0b7.
    What are the widgets? The map and The Facebook thingy? Have you tried clearing the browser's cache and reloading the page?
    OT

  • Problem: using the sound widget AND gallery in one page

    Hello,
    I simply tried to have a play-music player/button at a page, and a gallery to swipe through images too.
    It caused weird problems. The iPad behaves strange, the iBook (previewed at iPad) doesn't work anymore.
    Several times I had to make a total reset of iPad3.
    The same result with a combination of a keynote widget (image-sequence) and music.
    Isn't it possible to to offer a slidehow with sound?
    Thanks for any ideas!

    Hi,
    the idea is to watch the gallery fotos or the keynote slideshow and listen to music/sound same time.
    for any reason it did work in the beginning. but now, having the media widget/audio in the same page as keynote or gallery, the application does not run smoothly anymore, particularly the swiping is blocked.
    I already made 2 chapters to avoid too many widgets in one chapter.
    there are: 1 keynote slideshow (1024x768 images) , 1 gallery, and each 3 audio widgets to let the user choose different sounds. but actually the probelms start with pacing the first audio widget already...

  • Two widgets, One slide- audio issues

    Hello,
    I am currently working on a project and have two widgets on one slide, that will play audio when a user clicks on the individual labels:
    When I preview, the widget on the right will not play any audio (the left does). I have tried everything: refreshing, deleting/adding back audio, duplicating the slide, making sure the widgets don't touch, etc and it still won't work. Has anyone had this issue or am I not supposed to use two widgets on a slide?
    Any help is appreciated!
    Thanks,
    Jasmine

    Hi,
    Thanks for the reply! I am in 7.0.1 and I double checked and absolutely nothing is overlapping on the widgets--not even the placeholder box. I even tried to make sure that it wasn't b/c the first widget wasn't overlapping on the timeline, but that wasn't the case.
    I should be able to have both widgets up at the same exact time, playing audio when clicked on, correct?
    Here is my timeline, if that helps any:
    Thanks again for the help!

  • Pandora Widget no longer working - how to get a web clip to work instead?

    The Pandora widget was one of my favorites and now no longer seems to be working. So, I tried to make a webclip of the player and that worked fine. Awesome! But, it only works with the dashboard open and stops playing once I go back to working. Anyone know a way to keep it playing?

    HotShott,
    Ok here is how to fix your issue, go back into dashboard while hovering over your clip a little "i" shows up in the bottom right, then uncheck (only play in dashboard).
    Hope this helps with your issue.

  • Captivate 5: Widgets, buttons don't work in preview

    When I preview my Captivate 5 project, the print widget doesn't work, and the print command on the playbar doesn't work either. Any ideas? Also, does the print widget print one page or the whole project?

    Have you tried publishing to a server?  Sometimes the javascript or flash being run requires your project to be running from a server.  You can not rely on the preview mode to execute scripts which is fustrating because if you are attempting a java window close command it definately won't work when clients try it on their local machine... And still has a good chance of not working when published on a server

  • Text widget

    I just got my droid x about a week ago. Before that I had the droid pro. When I had the pro I put a text widget to one of my contacts and when I went to that widget it took me to the entire conversation. Now on my droid x the widget just let's me text but won't let me see the conversation. Is there a way to let me see everything or is that just how the x works?

    I don't know what text app you are using, but there may be a market text app that will offer a widget that will do what you need.
    I understand what you are getting at. I've never had that need, so I've not delved into trying it.
    Look at Handcent, Chomp, and Go messaging.
    Also, there may be a way to get that Droid Pro widget on your X. Unfortunately, you won't find it here, LOL. Do a search for "Android Forums" or sites and you just might find that widget, as I did with the News & Weather widget from the original Droid, before that widget was put on the phone in the Froyo update.
    Good luck,
    Geri O

  • Accordion Widget is moving my footer!

    I am using the Accordion Widget as one of my sidebars for
    various products. My issue is that when one of my larger accordion
    tabs opens, my footer and the bottom of my center column extend to
    the length of my accordion. HOW DO I STOP THIS?! It's driving me
    crazy.
    You can see what I'm talking about
    here.
    Any and all help is appreciated. Thanks.
    -Eric

    I think you miss the point. However, if you really think your
    design looks
    good with the accordion pushing down past the bottom of your
    other columns,
    including the footer, then that is certainly your right ;-)
    To do that, make
    your third column "position: relative" and make the root
    element of your
    accordion "position: absolute".
    Al Sparber - PVII
    http://www.projectseven.com
    Fully Automated Menu Systems | Galleries | Widgets
    http://www.projectseven.com/go/Elevators
    "ambook" <[email protected]> wrote in
    message
    news:g24710$1jt$[email protected]..
    > Thanks for commenting. I am a very green CSS designer
    and any advice is
    > helpful. I've tried moving my divs all over the place to
    correct this
    > issue,
    > but to no avail.
    >
    > I like the idea of adding the footer to the bottom of
    the middle column. I
    > might do that if I can't fix the issue. My css file is
    located
    >
    http://www.americanbookcompany.com/testsite/css/abcsite2.css
    if you'd like
    > to
    > look at it.
    >
    > Thanks for suggesting the faux columns, but the only
    column I want to
    > extend
    > is the accordion. Otherwise, as you see, my design gets
    thrown off.
    >
    > Thanks again for the comments. If anyone else knows how
    to fix this,
    > PLEASE
    > let me know. Thanks.
    >
    > -Eric
    >
    >
    >
    >
    >
    >
    >
    >
    >

  • Lost Dashboard widget beyond screen bounds

    I run a dual-monitor set up with my MacBook, and use Dashboard with and without the external monitor. As such, I keep my widgets on one screen and close together, so that they're still visible on the MacBook's LCD when it's used on its own.
    However, I've just noticed that I've lost a widget off the screen. When I enter or leave Dashboard, I can see it fly past the screen and off the right edge of the monitor. I already have another copy of this widget, so how can I go about removing it from the Dashboard? I needn't have two copies of it running.

    I just discovered a solution to this!
    In Dashboard, click the + to show the widgets bar, then select 'Manage widgets'. Uncheck the lost widget to disable it, then check it again to re-enable it. All copies of the widget will have been removed from the Dashboard, including those off the screen. Just add as many as you need if you want any back, though they'll need reconfiguring in some cases. (For example, iStat Pro remembered all my settings, but the Weather widget returned to default settings.)

  • Two click boxes counted as one interaction

    When I have a screen with two click boxes that are ticked to include in quiz, I only want one or the other clicked, not both. It seems that Captivate wants you to click both in order to for it to recognise that all questions have been answered. How do I get around this?

    If this is one of those situations where the user needs to choose one of two correct answers, and clicking either click box would be considered a correct answer, then one way to deal with this is to use the Infosemantics Interactive Master Widget:
    http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
    You turn off reporting for both of the click boxes and get them set up as slaves of the Interactive Master Widget, which then reports a single score to the quiz regardless of which click box is clicked.
    Trial version available here if you want to try it out:
    http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
    Just one caveat:  This is an SWF widget so it is not compatible with HTML5 output.

  • Widgets are broken / missing

    after my last apple software update, most of the standard widgets that come built into dashboard have gone haywire. in the 'widgets' widget (the one that allows you to turn widgets on and off, sort by date, etc.), the standard apple widgets, such as weather, stocks, address book, calendar, etc., are now labeled with the widgets icon (i.e. the black square w/ four icons).
    i can't install any of them to my dashboard, and the ones that i had on my dashboard have disappeared.
    any ideas on how to fix this?

    To reinstall the original Apple widgets you can use Pacifist. This program allows you to install individual files or folders, without reinstalling the whole OS. It takes some searching on your install disk where the widgets are located, but it works.

  • Reassign signer based on email field in widget?

    We have a form that can be filled out by any employee (leave application), that must then be approved by their supervisor, and then after that is shipped to the payroll department for final action.  I've created a widget to allow for any employee to initiate the form from a link on our intranet.  If the form includes a field to enter the supervisor's email address, is it possible to then assign the 2nd signer in the workflow to that email using some behind the scenes magic? (text tags, api, etc)
    Thanks!

    Hello jwywal,
    Would the second signer be always the same i.e the Supervisor? If yes, then while creating the widget, you can enter his email address in Counter-Signer's field and hit Create Widget. In the preview page, you can assign the Signature fields for both the signer as well as the counter-signer(Supervisor).
    Once the signer signs the Widget online, it will be forwarded to the Supervisor for counter-signing.
    Here is the Widget Documentation:
    http://helpx.adobe.com/echosign/kb/widget-create-one.html
    Let me know if there something else you would need to establish.
    Regards,
    -Rijul

  • Who'd like to test a new Drag and Drop Interactive Widget?

    It's taken about 6 months of every spare minute we could find but we're finally ready to do a round of Alpha testing for our new Drag and Drop Interactive Widget for Cp4 and 5.  This post is to ask for a handful of volunteers to test the new widget over the next week creating drag and drop interactions in both Cp4 and Cp5.
    If you've already tried our well-known Drag and Drop Lite Question Widget, but were a bit frustrated by the limitations that the quiz question format placed on your creativity, we think you'll be blown away by what this new Interactive Widget can do.  It does everything the current question widget does, aside from the aspects that are unique to question types (Review Area, Retake Quiz, etc) plus a whole lot more.  Due to the extra functionality, this widget has twice as much code as our last one.
    Some of the features:
    You can have as many widgets as you want on a single slide and each can be addressing a different drag and drop scenario.
    You can reference the same drag and target objects from different widgets to create different.
    Since they are interactive widgets, you can use the widget success/failure criteria to trigger Advanced Actions.  This opens up a lot of possibilities for game interactions.
    You can score each widget differently so that OnSuccess they will each report different scores for dragging the same objects.  This means you can have Conditional Scoring and more than one correct answer for a given problem.
    You can set one of the widgets to have its Preferences be used for all widgets on the slide so that you don't need to set all widget preferences individually, thus saving a lot of time.
    You can set Preference Priority for each widget to configure which widgets will have "right of way" if there is a potential conflict in preferences.  For example, if one widget wants one type of snapping behaviour on an object but another widget wants the same object to snap differently, the widget with the higher Preference Priority will dominate.
    You can nominate other interactive objects (including clickboxes or other widgets) to act as Submit button and Clear button to create a simulated quiz question.
    Since this widget is an Interactive widget, it also has the same advanced Pausing override behaviours we built into our Event Handler widget (http://www.infosemantics.com.au/eventhandler)  So you can have users stay on the same slide playing with the drag and drop interaction for as long as they like without progressing to the next slide until they want to.
    Plus other stuff I can't think of right now.
    If you decide to volunteer to participate in this Alpha testing, please don't use this widget for any production Captivate projects you may have.  The Alpha and Beta versions of the widget will be time-bombed to stop working after a couple of weeks so that we don't have buggy versions running around later.
    As I said at the beginning, we only need a handful of testers, we need people using either Cp4 or Cp5, and you need to do this testing over the next week so that we can then address any issues you find and release a debugged Beta version for more testing.
    Anyone wanna play?
    If you do want to volunteer, send me a private message on this forum with your email address so I can send you a widget and instructions.  We'll only be taking the first dozen or so people that are willing to contribute time and feedback.
    Cheers,
    Rod Ward

    Hi Sandy,
    If you hover the mouse over Rod's avatar, there is an e-mail address visible. For a private message; double-click on his avatar and you'll find the button private message in that dialog box,
    Lilybiri

Maybe you are looking for