SnapVault destination larger than source

I am currently using snapvault to backup volumes offsite. I have dedupe enabled on both source and destination volumes and I can see that dedupe is running after the snapvault transfer. I have a 1TB volume as the source that has both hourly and daily snapvault snapshots inside of it using about 66% of the volume. I am transferring just the daily snapvaults to the destination which is also the same size and that volume is 94% used. I do not have the default snapshots turned on, nor do I have a fractional reserve or snap reserve on the destination. Anyone have any ideas why the destination is using so much more than the source? These are CIFS volumes. Thank you in advance.

On the destination, there is one snapshot that stands out more than all the others. I currently have 12 dailes on the destination. The snapshot labeled sv_daily.7 is 310 GB while all other snapshots are under 800MB. On the source there is nothign glaring at all. The largest snapshot is 7GB. There are 3 or 4 others that are a couple GB and the rest a few hundred MB.

Similar Messages

Compressor setting so it won't output a video larger than source?

Hello.
I am sending a whole library of videos (most Apple ProRes, but varrying video dimensions based on the project) through Compressor 4 and I'm having an issue where, for some of the videos (with smaller video dimensions), the settings I'm choosing result in the transcoded videos being larger (in terms of dimensions) than the source (ie. if the source is 720p, the resulting video is 1080p).
I am using the following two settings:
- HD for Apple Devices (5 Mbps)
- HD 1080p for Video Sharing
Example 1 - I fed a 640 x 360 (Apple ProRes) file into Compressor 4 and selected the "HD for Apple Devices (5 Mbps)" preset. The resulting transcoded video was larger than 640 x 360 (I can't remember the actual size anymore, sorry). There is no option available, that I can see, to modify the preset to NOT create a file larger than the source?
Example 2 - I fed a 720p (Apple Animation) file into Compressor 4 and selected the "HD 1080p for Video Sharing" preset. The resulting transcoded video was 1080p. I though because the preset is marked "Up to 1920 x 1080" it wouldn't go beyond 1080p (ie. scale down anything larger to 1080p), but also thought that it would maintain the source dimensions and not enlarge a 720p source to 1080p?
Maybe this is how Compressor is supposed to work (ie. making resulting videos larger than source), but I'm hoping there's a way to modify the presets to not do this "ie. an option to not create a video with dimensions larger than the source)? Is this possible?
Thanks,
Kristin.

Apple devices have a standard frame size they encode to, so yes, this is how it works.

Mail Crashes when I try to open or attach PDFs larger than one page

Hi All....
Mail (2.1) crashes whenever I try to view or attach a PDF larger than 1 page. Here's a snippet from the latest crash log:
Version: 2.1 (752)
Build Version: 1
Project Name: MailViewer
Source Version: 7520000
PID: 157
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000002
Code[1]: 0x9064708c
Thread 0 Crashed:
0 com.apple.CoreGraphics 0x9064708c op_TJ + 0
1 com.apple.CoreGraphics 0x903ca0c4 handle_xname + 168
2 com.apple.CoreGraphics 0x903c9da8 read_objects + 444
3 com.apple.CoreGraphics 0x903c8f68 execute_stream + 108
4 com.apple.CoreGraphics 0x903c8eb4 CGPDFScannerScan + 96
5 com.apple.CoreGraphics 0x903ccb7c CGPDFDrawingContextDraw + 444
6 com.apple.CoreGraphics 0x903c52f0 CGContextDrawPDFPage + 184
7 com.apple.CoreGraphics 0x903c4180 CGContextDrawPDFDocument + 240
8 com.apple.AppKit 0x93a8b2fc -[NSPDFImageRep draw] + 252
9 com.apple.AppKit 0x9373e968 -[NSImageRep drawInRect:] + 288
10 com.apple.AppKit 0x93784dc0 -[NSImage drawRepresentation:inRect:] + 424
11 com.apple.AppKit 0x93784be4 -[NSImage _drawRepresentation:] + 168
12 com.apple.AppKit 0x9373b214 -[NSImage _cacheRepresentation:stayFocused:] + 208
13 com.apple.AppKit 0x9378495c -[NSImage _cacheRepresentation:] + 32
14 com.apple.AppKit 0x93752b20 -[NSImage drawInRect:fromRect:operation:fraction:] + 1148
15 com.apple.AppKit 0x938586b4 -[NSImage drawAtPoint:fromRect:operation:fraction:] + 152
16 com.apple.AppKit 0x938584e4 -[NSTextAttachmentCell drawWithFrame:inView:] + 924
17 com.apple.mail 0x00077e68 0x1000 + 487016
18 com.apple.mail 0x00077dc4 0x1000 + 486852
19 com.apple.AppKit 0x938580fc -[NSTextAttachmentCell drawWithFrame:inView:characterIndex:layoutManager:] + 36
20 com.apple.AppKit 0x93853d78 -[NSLayoutManager(NSTextViewSupport) showAttachmentCell:atPoint:] + 864
21 com.apple.AppKit 0x938539d4 -[NSLayoutManager(NSTextViewSupport) showAttachmentCell:inRect:characterIndex:] + 84
22 com.apple.AppKit 0x93779e34 -[NSLayoutManager(NSPrivate) _drawGlyphsForGlyphRange:atPoint:parameters:] + 5784
23 com.apple.AppKit 0x937c7158 -[NSTextView drawRect:] + 664
24 com.apple.mail 0x00028d50 0x1000 + 163152
25 com.apple.AppKit 0x937c6ba8 -[NSTextView _drawRect:clip:] + 1176
26 com.apple.AppKit 0x9372fe18 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 404
27 com.apple.AppKit 0x93732b60 _recursiveDisplayInRect2 + 84
28 com.apple.CoreFoundation 0x907ec3c4 CFArrayApplyFunction + 416
29 com.apple.AppKit 0x9372ff2c -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 680
30 com.apple.AppKit 0x93732b60 _recursiveDisplayInRect2 + 84
31 com.apple.CoreFoundation 0x907ec3c4 CFArrayApplyFunction + 416
32 com.apple.AppKit 0x9372ff2c -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 680
33 com.apple.AppKit 0x9372f3e0 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 196
34 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
35 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
36 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
37 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
38 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
39 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
40 com.apple.AppKit 0x9372f9a8 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 1676
41 com.apple.AppKit 0x93750044 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 192
42 com.apple.AppKit 0x93729054 -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 384
43 com.apple.AppKit 0x9371e348 -[NSView displayIfNeeded] + 248
44 com.apple.AppKit 0x9371e1b8 -[NSWindow displayIfNeeded] + 180
45 com.apple.mail 0x00025194 0x1000 + 147860
46 com.apple.AppKit 0x9371e064 _handleWindowNeedsDisplay + 200
47 com.apple.CoreFoundation 0x907dc73c __CFRunLoopDoObservers + 352
48 com.apple.CoreFoundation 0x907dc9dc __CFRunLoopRun + 420
49 com.apple.CoreFoundation 0x907dc47c CFRunLoopRunSpecific + 268
50 com.apple.HIToolbox 0x93208740 RunCurrentEventLoopInMode + 264
51 com.apple.HIToolbox 0x93207dd4 ReceiveNextEventCommon + 380
52 com.apple.HIToolbox 0x93207c40 BlockUntilNextEventMatchingListInMode + 96
53 com.apple.AppKit 0x936eaae4 _DPSNextEvent + 384
54 com.apple.AppKit 0x936ea7a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
55 com.apple.AppKit 0x936e6cec -[NSApplication run] + 472
56 com.apple.AppKit 0x937d787c NSApplicationMain + 452
57 com.apple.mail 0x000871d8 0x1000 + 549336
58 com.apple.mail 0x00087080 0x1000 + 548992
Part of me thinks that this doesn't actually have anything to do with mail. I had problems with Safari and Finder crashing every time I they tried to open a PDF. This was partially solved by installing Adobe Acrobat Reader and designating it as the default PDF veiwing app, but this option didn't appear when I ran Mail for the first time after installing Reader.
At this point, I've repaired the disk and repaired permissions, but that's about as much as I know how to do. I'd be grateful for any help that anyone can offer.
Thanks!
Sam E.
1GHz PowerbookG4, Dual 2.5GHz G5 Mac OS X (10.4.8)

Hi Sam.
I don’t know what’s going on. I suggest reinstalling the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with your computer:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update (which you say you’ve already done), no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Can't display PDF file larger than 2Mb

Would like to ask if someone knows that any setting that would allow the PDF file larger than 2Mb be displayed within web browser IE 7, for some strange reasons, the PDF file will stop download at arround 800 some Kb, and I waited for almost 15 minutes with no further action.
Back ground info:- MS Vista Home Premium SP1, 2G RAM, over 60G available HDD space, IE Temp file size set to 100M
Appreciated for any help
-David

Mike I have a similar problem with down loading PDF files larger that 3MB. I have three computers with Win XP, IE7 and 56K connection. I have tried to down load three different PDF files from the same source - 1.3MB 2.3MB and 5.3MB. The Computer with Reader 7.0 downloads and opens all files. The computers with Reader 8.1.2 and 9.0 downloads and opens the smaller files but stop at 3.2 MB on the larger file with an error message "The file is damaged and could not be repaired".
As fixes to the problem I have tried turning off any accelerators, installing and using Monzilla foxfire (then removed it since I had the same problem), increasing the cash size from 250MB to 1GB, Saving the file to the desktop rather than opening the file. I have not found useful help in Adobe Reader knowledge base.
Any suggestions?
Carl

Batch Resize photos Larger than a certain size.

Is there a way to have a script that searches a directory and any image files that are larger than 1000 x 1000 pixels are resized to 500 x 500 pixels and then saved over righting the sources file?
I am asking because our server has over 40,000 photos all over the place and I would like to reduce the space they take on the server.

I don't think that getting the file's length is the best way to determine if the file needs resizing. Especially if the file is in a format that supports compression. I think you would end up either setting the test value too low and open a lot of files that don't need resizing or set too high and miss files that do.
Also using getFiles() without a file mask will get all files and folders in the source folder. You will need to make sure it is an image file before trying to open in Photoshop to resize.
I think the function below would be a better way to determine if the file needs resizing. It tries to get the XMPMetadata to determine width and height. If that fails because the file does not have metadata it gets the size from Bridge.
var file = new File('~/desktop/_SLP7637.jpg');
var resize = needsResizing( file );
var resizeStr = ''
resize? resizeStr = 'needs resizing': resizeStr = 'does not need resizing';
alert(file.fsName+" "+resizeStr);
function needsResizing( file ){
    try{
        loadXMPLibrary();
        var xmpf = new XMPFile( file.fsName, XMPConst.UNKNOWN,
                                   XMPConst.OPEN_FOR_READ );
        var xmp = xmpf.getXMP();
        xmpf.closeFile();
        var dim = xmp.getProperty( XMPConst.NS_EXIF, 'PixelXDimension', XMPConst.STRING)+','+xmp.getProperty( XMPConst.NS_EXIF, 'PixelYDimension', XMPConst.STRING);
        dim = dim.split(',');
        unloadXMPLibrary();
        if(dim=="undefined,undefined"){
            var dim = undefined;
            var res = undefined;
            var bt = new BridgeTalk;
            bt.target = "bridge";
            var myScript = ("var ftn = " + psRemote.toSource() + "; ftn("+file.toSource()+");");
            bt.body = myScript;
            bt.onResult = function( inBT ) {myReturnValue(inBT.body); }
            bt.send(10);
            function myReturnValue(str){
                res = str;
                dim = str.split(',');
            function psRemote(file){
                var t= new Thumbnail(file);
                return t.core.quickMetadata.width+','+t.core.quickMetadata.height;
    }catch(e){unloadXMPLibrary();}
    var res = true;
    if(dim[0]<1001&&dim[1]<1001) res = false;
    return res;
function loadXMPLibrary(){
     if ( !ExternalObject.AdobeXMPScript ){
          try{
               ExternalObject.AdobeXMPScript = new ExternalObject
                                                            ('lib:AdobeXMPScript');
          }catch (e){
               alert( ErrStrs.XMPLIB );
               return false;
     return true;
function unloadXMPLibrary(){
   if( ExternalObject.AdobeXMPScript ) {
      try{
         ExternalObject.AdobeXMPScript.unload();
         ExternalObject.AdobeXMPScript = undefined;
      }catch (e){
         alert( ErrStrs.XMPLIB );

INI: XOQ-01600: OLAP DML Error "ORA-01438: value larger than specified prec

I have created a Time dimension in AWM 11.1.0.7.0B.
I have added two Hierarchies to it. One Hierarchy has All Years, Year, Week, day. The second hierarchy has All Years, Year, Quarter.
When I maintain the dimension, the following error occurs:
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-01600: OLAP DML Error "ORA-01438: value larger than specified precision allowed for this column
" while executing DML "SYS.AWXML!R11_LOAD_DIM('TIME.ALL_GREGORIAN_YEARS.LEVEL' SYS.AWXML!___R11_LONG_ARG_VALUE(SYS.AWXML!___R11_LONG_ARG_DIM 1) 'TIME.END_DATE.ATTRIBUTE' 'TIME.TIME_SPAN.ATTRIBUTE' 'TIME.LONG_DESCRIPTION.ATTRIBUTE' 'TIME.SHORT_DESCRIPTION.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_END_DATE.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_TIME_SPA.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_LONG_DES.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_SHORT_DE.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_TIME_SPA1.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_TIME_SPA2.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_TIME_SPA3.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_LONG_DES1.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_SHORT_DE1.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_TIME_SPA4.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_LONG_DES2.ATTRIBUTE' 'TIME.ALL_GREGORIAN_YEARS_SHORT_DE2.ATTRIBUTE' 'TIME.GREGORIAN_QUARTER_END_DATE.ATTRIBUTE' 'TIME.GREGORIAN_QUARTER_TIME_SPAN.ATTRIBUTE' 'TIME.GREGORIAN_QUAOLAP DML Error "%(1)s" while executing DML "%(2)s", Generic at TxsOqStdFormCommand::execute
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)

The most likely explanation is that you have a numeric attribute whose data type precision is less than that of the column it is mapped to. For example if you had an attribute with data type NUMBER(2) and you mapped it to a column with data type NUMBER(5), then you could get this error on load. Note that some of the attributes may not be visible in AWM. The offending SQL statement should be in the OUTPUT column of the CUBE_BUILD_LOG, but you may be able to fix this by just describing the view associated with the dimension. For example, here is the description of a TIME view created in 11.2..
Name                            Null?    Type
DIM_KEY                             VARCHAR2(60)
LEVEL_NAME                             VARCHAR2(30)
MEMBER_TYPE                             VARCHAR2(1)
DIM_ORDER                             NUMBER
END_DATE                             DATE
TIME_SPAN                             NUMBER
LONG_DESCRIPTION                        VARCHAR2(60 CHAR)
SHORT_DESCRIPTION                        VARCHAR2(60 CHAR)
MONTH_END_DATE                         DATE
MONTH_TIME_SPAN                        NUMBER(5)
MONTH_LONG_DESCRIPTION                    VARCHAR2(60 CHAR)
MONTH_SHORT_DESCRIPTION                   VARCHAR2(60 CHAR)
FISCAL_QUARTER_END_DATE                   DATE
FISCAL_QUARTER_TIME_SPAN                   NUMBER(5)
FISCAL_QUARTER_LONG_DESC                   VARCHAR2(60 CHAR)
FISCAL_QUARTER_SHORT_DES                   VARCHAR2(60 CHAR)
FISCAL_YEAR_END_DATE                        DATE
FISCAL_YEAR_TIME_SPAN                        NUMBER(5)
FISCAL_YEAR_LONG_DESCRIP                   VARCHAR2(60 CHAR)
FISCAL_YEAR_SHORT_DESCRI                   VARCHAR2(60 CHAR)
CALENDAR_QUARTER_END_DAT                   DATE
CALENDAR_QUARTER_TIME_SP                   NUMBER(5)
CALENDAR_QUARTER_LONG_DE                   VARCHAR2(60 CHAR)
CALENDAR_QUARTER_SHORT_D                   VARCHAR2(60 CHAR)
CALENDAR_YEAR_END_DATE                    DATE
CALENDAR_YEAR_TIME_SPAN                   NUMBER(5)
CALENDAR_YEAR_LONG_DESCR                   VARCHAR2(60 CHAR)
CALENDAR_YEAR_SHORT_DESC                   VARCHAR2(60 CHAR)You can get the same information from user_cube_attributes
SQL> select attribute_name, data_precision from user_cube_attributes where dimension_name = 'TIME' and data_type = 'NUMBER';
ATTRIBUTE_NAME                 DATA_PRECISION
TIME_SPAN
MONTH_TIME_SPAN                    5
FISCAL_QUARTER_TIME_SPAN              5
FISCAL_YEAR_TIME_SPAN                   5
CALENDAR_QUARTER_TIME_SPAN              5
CALENDAR_YEAR_TIME_SPAN               5

Why are my trimmed QT movies larger than the original?

I have a bunch of raw .dv files copied over from my camcorder that have never been edited or opened in any other program. When I open in QT X and trim the file, the trimmed MOV version is often larger than the raw DV. On one file, I even trimmed about half of it away and it still came out larger. I was under the assumption that DV is not compressed and neither is raw MOV,
After trimming the file and saving it, I select "movie" as the format since at this point I want to leave the files in as raw as a format as possible before I bring into an editing program like iMovie.
Any ideas?
Thanks

Since QuickTime X doesn't have any export "options" (other than dimensions) a "raw" DV Stream format should always be smaller in file size.
DV Stream is about 13 GB's per hour of recording. A QuickTime X "conversion" would use H.264 video and AAC audio codecs and should be about ten times smaller in file size.
Are you sure your files are DV Stream?
In any event, QuickTime X may not be the best tool for the job.
QuickTime Player Pro doesn't re-compress the source codec if you use a simple "save" or "save as".
A regular "save" after doing any edits will replace your source file with the newer version. No way to restore any of the edited information so you should use save as (keeping the original).

Navigate an image that is larger than the stage?

Hello, I would like some assistance getting this to work. I'm not even sure if its possible, but I will be eternally grateful for an answer.
I would like to have an image much larger than the stage, with little buttons all over it that play a MC when moused over. When the mouse reaches the edge of the screen, I want it to scroll so that the viewer can explore the whole image.
In short, its a map with destinations, and on mouse over the destinations play a MC. I'd like the viewer to be able to "explore" the map with the mouse.
It seems simple, is there a good way to do it?
Also, once it is done, is there a way to begin with the entire image shown, but then have it tween to its final (Very large) size, without breaking that functionality.
Thank you so much. This is for a class project and I'm trying to "go above and beyond" but, its a little to beyond for me.
Kayla

To make the image move, based on the mouse position you might do something like this:
addEventListener(Event.ENTER_FRAME, checkMouse);
function checkMouse(e:Event):void
     if(mouseX > 500){
          myImage.x -= 1;
     if(mouseY < 100){
          myImage.y += 1;
That's just a simple example. You'll need to check the bottom and left too... and you'll need to stop your image from moving past its edges:
if(myImage.x + myImage.width < theRightEdge){
     myImage.x = theRightEdge - myImage.width;
to keep it from going too far left...
I would also suggest using TweenLite to do your tweening. You can simply google TweenLite to find it.

Why are step numbers larger than text font?

I just upgraded from RH7 to RH9, I find that when I generate Webhelp, the autonumbers in steps are larger than the font used in the text. This only shows up in the generated output, not the source. Bulleted lists, on the other hand, look fine. Bullet size is commensurate with text font size.

Thanks again, William. I think that is a good suggestion. However, for some reason, the problem seems to have corrected itself. Several webhelp generations produced the anomoly, so it wasn't just a quirk of one compile. In fact, I think I saw this when using the trial version a month or so ago. Anyway, the only thing I did that might have affected this change is that I changed style sheets to the default for on compile and then switched back to my custom style sheet. Now I am generating ordered lists with the correct font size.
If the problem appears again, the first thing I'll do is try your latest suggestion.
thanks again.

On my photosmart 7520 I can not print any picture larger than 4x6. what can I do

On my photosmart 7520, which is brand new, I can not print any pictire larger than 4x6. When I place a 5x7 or 8x10 on bottom tray does not pick it up, it picks up from the top tray and it displays wrong paper size. What can I do?

Hi,
I recommend that you open your print preferences and select the paper source as the main tray and set the paper size to whatever size it is you want to print. I don'y have a Vista example but I have included a screen shot from Windows 7 of the options window you're after.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Exchange 2013 - powershell - create search folder for items larger than 24mb

Hi all,
is it possible to use PowerShell and create search folder in spesific mailbox that contains items larger than 25mb?
Thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Ok this should be possible.
I just tested a basic idea of what you want to do on Exchange 2010 SP3. IF you need me to test on 2013 let me know.
Add the account you want to run the powershell search as to the "Discovery Management" role in AS or ECP.
This gives you access to the "search-mailbox" command. Using this you should be able to build a search that moves mail to a different folder.
http://technet.microsoft.com/en-gb/library/dd298173(v=exchg.150).aspx
Thanks,
Edit: something like this would help but the target mailbox would be there own I guess
Search-Mailbox -SearchQuery “Size:>25MB” -TargetMailbox SomeMailbox -TargetFolder Export -LogOnly -LogLevel Full
Ok so I have found a issue where the command does not allow the source mailbox to be the same as a target mailbox. I dont know if this will help you then unless you go through a long process of moving the mail out then back but thats very long.
You could create a rule for this but it would have to be run manually with specific settings so I guess that might not work as user training can be difficult.
You could write a VBA macro for this and then apply it to all you machines.
Or there is a 3rd party tool that could help you called
Auto-Mate
Sorry I could not be more helpful.
Good luck

CDC Failed with Error ORA-01438: value larger than specified precision

Hi,
I have created Asynchronous Distributed Change Data Capture Set-up as per the Guildines from Oracle.
Now My Change Set has become Invalid with error: ORA-01438: value larger than specified precision allowed for this column.
I Compared Change Table Structures with Source Table on Source Database and the structure is matching.
Now I am trying to Run below script:
Begin
dbms_cdc_publish.alter_change_set (Change_Set_name =><<Change Set Name>>,
recover_after_error => 'Y'
End;
I am getting the below error:
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at "SYS.DBMS_APPLY_ERROR", line 147
ORA-06512: at "SYS.DBMS_APPLY_ERROR", line 301
ORA-06512: at "SYS.DBMS_APPLY_ADM", line 490
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 580
ORA-06512: at line 2
Still the error is existing, I couldn't find any issues with Change Table structure as it is in Line with Source Table Structure.
Can anyone please help me on this.
Staging Database details:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
TNS for Linux: Version 10.2.0.4.0 - Production
Source Database details:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
TNS for HPUX: Version 10.2.0.4.0 - Production
Also Can anyone let me know if it is possible to run CDC Set-up without DBA Privileges. i,e once the CDC Set-up is done, if we revoke the DBA Privilege will the Capture work properly. I know that for creating Change Table, Set and Source we require DBA Access. But once the set-up is done, do we really require DBA Privileges?
Thanks,
Shashi
Edited by: user8254952 on 09-Mar-2010 05:57
Edited by: user8254952 on 09-Mar-2010 06:00

Hi Shashi,
As CDC is built on top of Oracle streams framework, for better responses you can post this ques under {forum:id=70} category.
"ORA-01438: value larger than specified precision allowed for this column" is usually encountered for NUMBER datatype columns. At what level did you check the datatypes? Please confirm if the precision(for NUMBER datatype) are also similar.
Please attach output for the following queries:
select error_message from dba_capture;
select error_number, error_message from dba_apply_error;Please re-validate the data types and then run the same API with remove_ddl = 'Y' option, like this:
exec DBMS_CDC_PUBLISH.ALTER_CHANGE_SET(change_set_name=>'CHANGE_SET_NAME' , recover_after_error=>'Y' , remove_ddl=>'Y');
Hope it helps!
Cheers,
AA

Print the report on page has width larger than height and not landscape mode

Hi,
I'm trying to print report on page (Width: 18cm, Height: 13cm) which the width larger than the height.
The problem is windows keeps changing the page oreintation to landscape and when I change it back to portrait its changing the width to 13cm and height to 18cm.
I'm using dot matrix printer to print the report, if i put Landscape , printer is printing the text in horizontal.
Already i have tried to setup the custom for on printer, and used custom page size but it is changing to landscape.
I need to print the report with out preview, direct print top printer, NO PDF....
Thank you .....

Hi Anil,
After testing the issue in my environment, I can reproduce it. When I set (Width: 18cm, Height: 13cm) as the Report Page size, it would automatically convert Orientation from Portrait to Landscape. Because the Orientation displayed is dependent on the page
width and page height of the report.
But in my scenario, the Orientation option just change the Width and Height sizes, it couldn’t affect the text rotation. I guess this issue can be caused by the printer and printer driver, please try to update them. Reference:
http://stackoverflow.com/questions/15244336/printing-in-landscape-or-portrait-automatically-rotates-text-ssrs?lq=1
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Database much larger than expected when using secondary databases

Hi Guys,
When I load data into my database it is much larger than I expect it to be when I turn on secondary indexes. I am using the Base API.
I am persisting (using TupleBindings) the following data type:
A Key of size ~ *80 Bytes*
A Value consisting of 4 longs ~ 4*8= *32 Bytes*
I am persisting ~ *280k* of such records
I therefore expect ballpark 280k * (80+32) Bytes ~ *31M* of data to be persisted. I actually see ~ *40M* - which is fine.
Now, when I add 4 secondary database indexes - on the 4 long values - I would expect to see approximately an additional 4 * 32 * 280k Bytes -> ~ *35M*
This would bring the total amount of data to (40M + 35M) ~ *75M*
(although I would expect less given that many of the secondary keys are duplicates)
What I am seeing however is *153M*
Given that no other data is persisted that could account for this, is this what you would expect to see?
Is there any way to account for the extra unexpected 75M of data?
Thanks,
Joel
Edited by: JoelH on 10-Feb-2010 10:59
Edited by: JoelH on 10-Feb-2010 10:59

Hi Joel,
Now, when I add 4 secondary database indexes - on the 4 long values - I would expect to see approximately an additional 4 * 32 * 280k Bytes -> ~ 35MA secondary index consists of a regular JE database containing key-value pairs, where the key of the pair is the secondary key and the value of the pair is the primary key. Your primary key is 80 bytes, so this would be 4 * (4 + 80) * 280k Bytes -> ~ 91M.
The remaining space is taken by per-record overhead for every primary and secondary record, plus the index of keys itself. There are (280k * 5) records total. Duplicates do not take less space.
I assume this is an insert-only test, and therefore the log should contain little obsolete data. To be sure, please run the DbSpace utility.
Does this answer your question?
--mark

All of a sudden I can't change my Photoshop CS4 Font size any larger than 18px. What did I do?

Hi
I was working on a logo today in Photoshop. I clicked on the font size to increase the text size from 18px to 30px. I got a message that I couldn't go any larger than 18 px. Any idea how to fix this???
Thanks
Sarahb

Please note that your post is already buried in the old pages of the forum.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

SnapVault destination larger than source

Similar Messages

Maybe you are looking for