SNC Field Provisioning
Hey gurus,
Wondering if anyone knows how to provision the SNC field in GRC 10.0 using fields pulled from the access request by mapping them in the default value of the SNC field? I tried putting #!# around the attribute name (i.e. #!#userId#!#, similar to 5.3 setup) and %, which is how it is pulled into the email templates, but still not able to get it to work.
Thanks,
David
Hi David,
So finally did you start using the SNC field by filling up default field in Maintain End user Personalization with p:#!#USERID#!# as even if i use the above string or p:%USERID% it is not picking up the values from LDAP i.e. it is just giving the same string rather than actual value.So just wanted to confirm as to what string was used to get the actual value.
Thanks
Uday
Similar Messages
-
SNC Field names - Find tables.
Hello Experts,
In which SNC tables we will find the following fields.
Act WOS
Actual price
Actual Receipt Date
Actual Received Quantity
ASN Time
Avail to ship Qty
Base UOM
Brand
C&D SAP Number
Capacity
CD owned or Consignment
Chep Quantity Received
Chep Quantity Shipped
CM
CM Name Location
Consignment Vendor Name
Consignment Vendor Number
Contract Manufacturer Name
Contract Manufacturer Number
Contract Manufacturer/Plant
Date of Shipment
Delivery Date
Delivery/Bill of Lading Number
Description
Dollar value
Domestic / International
Finished Material / WIP / Raw material
GR Quantity
Location
Manufacturer Part Number
Manufacturer SAP Number
Material
Material Description
Material Number
Obsolete
Old CD Part Number
Order UOM
Percent achieved
Physical Inventory Value
PIR Qty
PIR qty current month
Plan Quantity
Plan Spend
Planned Receipt Date
Planned waste%
PO Date
PO Number
PO price
PO Quantity
Price per Unit
Production Confirmation Qty
Production Confirmation Qty current month
Production Confirmation Qty current week
Purchasing Doc Number
Quantity
Quantity in SAP
Quantity on Hand
Quantity per
Receipt date
Release Number
Release Quantity
Release Required Delivery Date
Required Quantity in Units (Requirements in weekly buckets)
Requirement Quantity
Requirements Date
Safety Stock
SAP Inventory Dollar value
Schedule line Qty
Schedule line Qty current Month
Schedule Line Qty current week
Scheduled Quantity
Shipped Quantity
SKU
Slow Moving
Standard price (info record)
STO Qty
Supplier
Target WOS
Unit of Measure
Variance
Variance Dollar Value
Variance Quantity
Vendor Name
Vendor#
Vendor/Contract Manufacturer Name
Weeks of supply
Where used (FG SKU#)
Wks Low.
-
Hello
We have installed Access Enforcer 5.2 on SAP system. AE can able to update all the information in SU01 tab except SNC information.
Can any body please let us know how to configure SNC tab with appropriate string. We have also looked at User Provisioning --> Field Mapping options. We can find all the fields of SU01 which can be mapped with AE fields except SNC field. Please suggest how to overcome this situation.
Thanks & Regards,
RohanThis is quite interesting.
First of all AE populates all the fields which are mandate in the conventional SU01 screen. If you need any other field to be populated then that has to be defined.
In your case SNC is the additional tab you are getting since you configured that way. So this will not be populated by default.
To make this work., follow the steps.,
- Define custom fields in AE
- Do field mapping in provisioning
Define custom fields in AE
Click option custom fields in the configuration tab, give name to the field and a field label and a field type.
Field mapping in provisioning
Populate the initial screen with group name, short desc, connector type and version. Also select the default application and click continue. Next screen map the custom AE fields to the Application fields.
There will be a list of application fields available in this dropdown., but not sure whether it will give option for SNC related fields. There are 2 ways to look into it.,
1. The possible fields are predefined in AE and cannot be appended with new fields
2. The possible fields are selected based on the application you select in the previous screen. Example : if you have your system defined for SNC then those related fields will get picked on the fly and get displayed in the possible dropdown.
If the second case is true then you should be able to achieve what you want to and if not you should verify with SAP.
Regards,
Muthu Kumaran KG -
GTC Creation Problem with OIM9.1.0.1866.50 BP12
Hi,
I have installed OIM 9.1.0.1 on OAS. After BP12 was installed, I can't create a GTC connector (step 3: Modify Connector Configuration).
An error ocurres when I try to do the following steps:
-Create a new field in OIM stage ( String, 100 chars, mapping without transformation)
-Map a field (Provisioning Staging stage) with the new field created above
When I Select in the pop up windows the new field to map--> "A system error was encountered. Contact Oracle Identity Manager System Administrator."
Without BP12 this error does not ocurred!
We are getting the below exception in server log:
ERROR,26 ene 2011 12:59:33,544,[XELLERATE.GC.IMAGEGENERATION],node has no children
ERROR,26 ene 2011 12:59:33,544,[XELLERATE.GC.IMAGEGENERATION],Exception occurred while creating the transformations between various dataset fields
ERROR,26 ene 2011 12:59:33,544,[XELLERATE.GC.IMAGEGENERATION],An Exception occurred while rendering parent dataset 'ProvisioningData' along with its fields on the image
java.lang.Exception: An Exception occurred while rendering parent dataset 'ProvisioningData' along with its fields on the image
at com.thortech.xl.gc.util.ImageGenerator.setParentcells(Unknown Source)
at com.thortech.xl.gc.util.ImageGenerator.generateImage(Unknown Source)
at com.thortech.xl.webclient.util.UIFacade.getImage(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.updateImageMap(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.displayConfirmationPage(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.goNext(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.Exception: Exception occurred while creating the transformations between various dataset fields
at com.thortech.xl.gc.util.ImageGenerator.setTransformations(Unknown Source)
... 34 more
Caused by: java.lang.ArrayIndexOutOfBoundsException: node has no children
at javax.swing.tree.DefaultMutableTreeNode.getChildAt(DefaultMutableTreeNode.java:228)
... 35 more
ERROR,26 ene 2011 12:59:33,544,[XELLERATE.WEBAPP],Class/Method: CreateConnectorPopupAction/displayConfirmationPage encounter some problems: An error occurred while generating the image representing the OIM datasets
com.thortech.xl.gc.exception.ImageGenerationException: An error occurred while generating the image representing the OIM datasets
at com.thortech.xl.gc.util.ImageGenerator.generateImage(Unknown Source)
at com.thortech.xl.webclient.util.UIFacade.getImage(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.updateImageMap(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.displayConfirmationPage(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.goNext(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
11/01/26 12:59:33 com.thortech.xl.gc.exception.ImageGenerationException: An error occurred while generating the image representing the OIM datasets
11/01/26 12:59:33 at com.thortech.xl.gc.util.ImageGenerator.generateImage(Unknown Source)
11/01/26 12:59:33 at com.thortech.xl.webclient.util.UIFacade.getImage(Unknown Source)
11/01/26 12:59:33 at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.updateImageMap(Unknown Source)
11/01/26 12:59:33 at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.displayConfirmationPage(Unknown Source)
11/01/26 12:59:33 at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.goNext(Unknown Source)
11/01/26 12:59:33 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
11/01/26 12:59:33 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
11/01/26 12:59:33 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
11/01/26 12:59:33 at java.lang.reflect.Method.invoke(Method.java:585)
11/01/26 12:59:33 at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
11/01/26 12:59:33 at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
11/01/26 12:59:33 at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
11/01/26 12:59:33 at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
11/01/26 12:59:33 at com.thortech.xl.webclient.actions.CreateConnectorPopUpAction.execute(Unknown Source)
11/01/26 12:59:33 at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
11/01/26 12:59:33 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
11/01/26 12:59:33 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
11/01/26 12:59:33 at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
11/01/26 12:59:33 at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
11/01/26 12:59:33 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
11/01/26 12:59:33 at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
11/01/26 12:59:33 at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
11/01/26 12:59:33 at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
11/01/26 12:59:33 at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
11/01/26 12:59:33 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
11/01/26 12:59:33 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
11/01/26 12:59:33 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
11/01/26 12:59:33 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
11/01/26 12:59:33 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
11/01/26 12:59:33 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
11/01/26 12:59:33 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
11/01/26 12:59:33 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
11/01/26 12:59:33 at java.lang.Thread.run(Thread.java:595)
Please let me know if anybody has any idea?
Thanks in advance!
Gustavo
Edited by: user11356439 on Jan 26, 2011 2:56 PMYes. We'd installed release patch (patch_Identity_p8484010_9102_Generic) before we applied the BP12.
Version.prop file under the xellerate\config directory included:
Before BP12:
build.number=9.1.0.1865.28
product.version=9.1.0.2
After BP12:
build.number=9.1.0.1866.50
product.version=9.1.0.2
I hope you can help us with this problem!
Thanks you. -
Saprouter:wildcard character error
Hi people,
I stopped the saprouter and when I try to start other time I have the next error message:
WARNING: Wildcard character used in route target
What can i do?I push a # in the two lines for the documented them and try to execute saprouter.exe -r and the next message are:
command line arg 0: saprouter.exe
command line arg 1: -r
main(): pid = 6084, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
reading routtab: ./saprouttab
ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7806]
ERROR => SNC field without SNC active, skip line 5 [nirout.cpp 7806]
ERROR => SNC field without SNC active, skip line 9 [nirout.cpp 7806]
ERROR => SNC field without SNC active, skip line 13 [nirout.cpp 7806]
Now I have configured the OSS1 with the note 96655, and when I try to logon on the system I have the error message:
Unable to connect to message server.
Edited by: David Esquivel on Sep 19, 2008 3:11 PM -
Patch approval error getting from solution manager
Hi,
We are getting error while downloading patch approval from solution manager. As reference below error, I have checked this note 982045 & put valid user id & password of the service market place there but error is getting same. Here following error screen as mentioned below. please suggest us.
Regards
AbhijitHi,
Thanks for sharing these note but after using this note 1178684, we are facing this error as follows.
trc file: "dev_rout", trc level: 1, release: "700"
Fri Feb 28 16:37:05 2014
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
main: pid = 4072, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
Fri Feb 28 16:37:06 2014
reading routtab: './saprouttab'
*** ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 3 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 4 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 5 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 6 [nirout.cpp 7767]
Fri Feb 28 16:37:43 2014
*** ERROR => SncPEstablishContext() failed for target='p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE' [sncxxall.c 3379]
*** ERROR => SncPEstablishContext()==SNCERR_GSSAPI [sncxxall.c 3345]
GSS-API(maj): Miscellaneous failure
GSS-API(min): Invalid password (PIN)
Unable to establish the security context
target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
<<- SncProcessOutput()==SNCERR_GSSAPI
*** ERROR => NiSncIInitHdlSecurity: SncProcessOutput failed (rc=-4;0206E3B0) [nisnc.c 1098]
*** ERROR => NiSnc2Connect C1/-1, 194.39.131.34 (rc=-17) [nirout.cpp 2816]
*** ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'solman' failed (rc=-17) [nirout.cpp 2243]
Regards
Abhijit -
Hi All,
Kindly help me on this error. The SAProuttab is below:
SAPROUTTAB:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.206.110.74 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.206.110.74 3201
SNC-connection from SAP to local R/3-System for pcAnywhere
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.206.110.74 5631
SNC-connection from SAP to local R/3-System for SAPtelnet
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.206.110.74 23
SNC-connection from SAP to local R/3-System for Netmeeting
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.206.110.74 1503
Access from your local Network to SAPNet - R/3 Frontend
P 10.206.110.* 194.39.131.34 3299
All other connections will be denied
D * * *
After installing the SAProuter and starting it, I got this error in dev_rout:
trc file: "dev_rout", trc level: 1, release: "700"
Mon Nov 16 17:53:37 2009
SAP Network Interface Router, Version 38.10
command line arg 0: c:\usr\sap\saprouter\saprouter.exe
command line arg 1: -r
main: pid = 7116, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 5 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 6 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 9 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 12 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 15 [nirout.cpp 7767]
Mon Nov 16 18:22:33 2009
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 1892
(SI_ECONN_REFUSE/10061; I4; ST; 194.39.131.34:3299) [nixxi.cpp 2823]
Mon Nov 16 18:26:01 2009
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 1892
(SI_ECONN_REFUSE/10061; I4; ST; 194.39.131.34:3299) [nixxi.cpp 2823]
I don't know what to do on this. The server that the SAProuter is installed has no internet connection and only ports that are required are open.
Please help me.
Best Regards,
Eco
Edited by: CaptainSAP23 on Nov 16, 2009 7:51 PMCan you please tell me,how this error got solved? I am facing the same issue.
-
Hi experts
while configuring saprouter i am getting the error as given below. please give the exact entries which are to be given in SAPROUTTAB .
trc file: "dev_rout", trc level: 3, release: "700"
Tue Jul 22 12:00:13 2008
NiHsLInit: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 at 01192AD0)
NiIInit: host/serv bufs already initialized
NiPGetNodeAddrList: got 2 interface(s) from operating system
[0] IP-Address: 210.211.230.130
[1] IP-Address: 192.168.0.203
SAP Network Interface Router, Version 38.10
Compiled May 22 2007 00:31:59
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V3
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
NiBufISetParam: set max heap to 20000000
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiIMyHostName: hostname = 'fusesolman'
main: pid = 4016, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 1928 (I4; ST)
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 0 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIListen: state of hdl 0 NI_LISTEN
NiIListen: listen for client requests on hdl 0
NiSelICreateSet: new set0
SiSelNInit: allocate 134560 bytes for FI (811)
NiSelIInit: size of set0 is 811
SiSelNSet: sock 1928 added to set pos 0
NiSelIAddMsg: added hdl 0 to set0
SiSelNSet: set events of sock 1928 to: rp-
reading routtab: './saprouttab'
ERROR => SNC field without SNC active, skip line 1 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 3 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 4 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 5 [nirout.cpp 7767]
NiStrToAddrMask: '210.211.230.130' -> 210.211.230.130 [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiStrToAddrMask: '194.39.131.34' -> 194.39.131.34 [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
ERROR => Cannot find source identifyer, skip line 7 [nirout.cpp 7720]
contents of routtab ('./saprouttab', 1 entries):
P, 210.211.230.130 ffff:ffff:ffff: 194.39.131.34 ffff:ffff:ffff: * *
NI-ROUTER LOOP ********
SiSelNSelect: start select (timeout=-1)
Cheers
DeepakHi,
did you configure SNC router?
provide your saproutab.
also check SAP Router Error Pls help
regards,
kaushal -
Hello,
Our SAProuter runs on windows 2003 . When I start the saprouter from the command prompt . I got the following error:
ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7775]
ERROR => SNC field without SNC active, skip line 5 [nirout.cpp 7775]
***LOG Q0I=> NiPGetServByName: service 'sapdp99' not found: getservbyname [ninti.c 489]
ERROR => service 'sapdp99' unknown, skip line 8 [nirout.cpp 7931]
Below is the dev_rout file:
trc file: "dev_rout", trc level: 1, release: "700"
Thu Apr 29 18:13:06 2010
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
main: pid = 3464, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7775]
ERROR => SNC field without SNC active, skip line 5 [nirout.cpp 7775]
And here is the saprottab:
SNC - Connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server IP> 32<Instance>
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 164.109.104.121 3200
Allows connections from the entire customer network to sapservX
and therefore to the Online Service System via SAProuter port 3299.
P * sapserv2 sapdp99 *
All other connections will be denied
P * * *
Thanks
OsamaHi Bharath,
1 -Can you please tell how were to trying to start the router?
saprouter -r
2 - Are SAPCRYPTOLIB credentials available to a process that runs as an NT
service
I'm not sure about how to answer this?
3 -Run the command:sapgenpse seclogin -p <path>\<psefile> -O <SNC_admin>=
C:\USR\sap\SAProuter>sapgenpse seclogin -p C:\usr\sap\saprouter\nt-x86_64\sapgen
pse.exe -O acnsupport
running seclogin with USER="acnsupport"
creating credentials for user "VM0000000311301\acnsupport"...
ERROR in af_open: (4356/0x1104) unknown structure
ERROR in secsw_open: (4356/0x1104) unknown structure
ERROR in secsw_open_pse_or_extension: (4356/0x1104) unknown structure
ERROR in sec_get_PSEtype: (4356/0x1104) unknown structure
4- Check wether the PSE certificates has been imported correctly.
PSE certificates has been imported correctly
Thanks
Osama -
Hi Guru's,
I would like you too help me out here. I did put the saproutab file and dev_rout. Can you tell me what i am doing wrong here it's not starting the SAProuter.
1. SNC - connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"194.39.131.34 *
1. SNC - connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
1. SNC - connection from SAP to local R/3-System for PcAnywhere
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 5631
1. SNC - connection from SAP to local R/3-System for saptelnet
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
1. SNC - connection from SAP to local R/3-System for WTS
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 3389
1. Access from the local Network to SAP R/3 Frontend (OSS)
P * 194.39.131.34 3299
P * 127.0.0.1 3299
P * 192.168.125.6 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.6 3200
***********Beginning of data*************
trc file: "dev_rout", trc level: 1, release: "710"
Tue Dec 28 18:28:46 2010
SAP Network Interface Router, Version 39.4
command line arg 0: saprouter
command line arg 1: -r
main: pid = 53775, ppid = 53769, port = 3299, parent port = 0 (0 = parent is not
reading routtab: './saprouttab'
ERROR => SNC field without SNC active, skip line 2 ¢nirout.cpp 9267!
ERROR => SNC field without SNC active, skip line 5 ¢nirout.cpp 9267!
ERROR => SNC field without SNC active, skip line 5 ¢nirout.cpp 9267!
ERROR => SNC field without SNC active, skip line 8 ¢nirout.cpp 9267!
ERROR => SNC field without SNC active, skip line 11 ¢nirout.cpp 9267!
ERROR => SNC field without SNC active, skip line 14 ¢nirout.cpp 9267!
ERROR => SNC field without SNC active, skip line 21 ¢nirout.cpp 9267!
Tue Dec 28 18:33:10 2010
ERROR => NiBufIProcMsg: hdl 17 received rc=-94 (NIEROUT_PERM_DENIED) from pe
***********End of Data*******************Hi,
Since you are using SNC connection to SAP, check below things:
1) SNC_LIB parameter should be set.
2) start your saprouter with below command:
saprouter -r -S <port> -K "p:<Your Distingushed Name>"
Thanks
Sunny -
Hi everyone,
in order to make a remote SNC connection between SAP and our company,
i already made a remote connection data sheet and SAP sent me back the installation procedure. Also, i have the SAP Cryptolib Software CD installation. Regarding to this, i created the SAProuter Certificate for Support Connections. I have checked if the certificate has been imported correctly and the name of the Issuer is: CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
After checking all th previous procedure, i have to start the SAProuter. When i enter the command : saprouter -r
there is an error message :
trcfile dev_rout
no logging active
in the dev_rout file :
trc file: "dev_rout", trc level: 1, release: "700"
Mon Mar 17 12:48:11 2008
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
main: pid = 3692, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
Could you please tell me why there is no logging active?
Thanks a lot.
EDIT :
PS :
1. I already have installed the latest cryptolib via a CD sent by SAP AG
2. In the path E:\usr\sap\saprouter, there are all the files (sapgenpse.exe, saprouter.exe, sapcrypto.dll, saprouttab, dev_rout etc.
3. The environment variables SECUDIR are located in E:\usr\sap\saprouter and SNC_LIB also in E:\usr\sap\saprouter\sapcrypto.dll
4. The command sapgenpse get_my_name -v -n Issuer displays Issuer : CN=SAProuter CA, OU=SAProuter, O=SAP, C=DEHi,
here is the command "saprouter -r -G saprouter.log" and there is this message :
trcfile dev_rout
logfile saprouter.log
ERROR => invalid lines in './saprouttab', see 'dev_rout' [nirout.cpp 7998]
Regarding to the dev_rout file:
trc file: "dev_rout", trc level: 1, release: "700"
Tue Mar 18 10:16:26 2008
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -G
command line arg 3: saprouter.log
main: pid = 4088, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
ERROR => SNC field without SNC active, skip line 6 [nirout.cpp 7767]
ERROR => SNC field without SNC active, skip line 14 [nirout.cpp 7767]
saprouttab file:
line 6 : KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <Solution Manager IP Adress> <Solution Manager Port>
line 14 : KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
Thanks -
Hello Good afternoon, greetings to all
We have this problem, could someone help please SAProuter windows service does not work, short of sending the message windows 1067 unexpected error:
Activities:
-Revision of the host so if the ip and hostname
-Revision of services so if the ip and port 3299
-Revision dev_rout says:
trc file: "dev_rout", trc level: 1, release: "700"
Fri July 22 19:52:04 2011
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter.exe
command line arg 1:-r
main: pid = 5408, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
routtab reading: '. / saprouttab'
ERROR => SNC field SNC Without active, skip line 3 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 6 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 7 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 8 [nirout.cpp 7775]
ERROR => SNC field SNC Without active, skip line 9 [nirout.cpp 7775]
-Revision of saproutrab: (there are two lines that catch my attention) says:
Access from Iternet - R / 3 Frontend to local Network
P * 3299 194.39.131.34 suim780
and
SNC connection to local system for R/3-Support
KP "p: CN = sapserv2, OU = SAProuter, O = SAP, C = DE" # 3389 99.34.48.92 App26.mexinox.mx where ip app26 = 99.34.48.92 host server in question.
-Revision of string windows service properties:
e: \ usr \ SAProuter \ saprouter.exe service-r-W 60000-R e: \ usr \ SAProuter \ saprouttab-K "p: CN = app26.mexinox.mx, OU = 0001119592, OU = SAProuter, O = SAP , C = DE "
-Revision of log file in E: \ usr \ SAProuter
Mon Jun 27 11:03:45 2011 INIT LOGFILE
Mon Jun 27 11:03:45 2011 READ ROUTTAB. / Ok saprouttab
Mon Jun 27 11:52:53 2011 CONNECT FROM C1 / - host 99.34.55.188/3169 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 PERM DENIED C1 / - host 99.34.55.188 (app34.mexinox.mx) to 194.39.131.34/sapdp99
Mon Jun 27 11:52:53 2011 DISCONNECT C1 / - host 99.34.55.188/3169 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 CONNECT FROM C1 / - host 99.34.55.188/3170 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 PERM DENIED C1 / - host 99.34.55.188 (app34.mexinox.mx) to 194.39.131.34/sapdp99
Mon Jun 27 11:52:53 2011 DISCONNECT C1 / - host 99.34.55.188/3170 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 CONNECT FROM C1 / - host 99.34.55.188/3171 (app34.mexinox.mx)
Mon Jun 27 11:52:53 2011 PERM DENIED C1 / - host 99.34.55.188 (app34.mexinox.mx) to 194.39.131.34/sapdp99
-Revision of the lift command line says:
dev_route trcfile
active nologiin
routtab can not open '. / sapouttab': exit program! (Not before the exit Arcab this program!)
the last error is this:
E:\usr\saprouter>saprouter -n
Wed Aug 03 11:15:53 2011
SAP Network Interface Router, Version 36.15
Wed Aug 03 11:15:54 2011
***LOG Q0I=> NiPConnect2: SO_ERROR (10061: WSAECONNREFUSED: Connection refused)
[ninti.c 979]
ERROR => NiRAdmin: NiBufConnect (rc=-10) [nixxrout.c 3843]
ERROR partner not reached (host localhost, service 3299)
TIME Wed Aug 03 11:15:54 2011
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -10
MODULE ninti.c
LINE 979
DETAIL NiPConnect2
SYSTEM CALL SO_ERROR
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
E:\usr\saprouter>
'We think it's a port problem because the service and remove and re-created on Windows and it works.
Anyone have any other comment please thank you very much for your help everyone.
tnaksThis sounds like the application and not networking. Did you download the right version for your OS?
2008r2 is only 64bit I believe, looking at the download site..you got 3 options..you got the right one..
file is saprouter_617-20010469.sar right?
I guess if it was 32 bit, server would complain during installation.
take a look at this http://scn.sap.com/thread/768187
100% sure about your system variable? -
Adding string to gui installation
Hi,
I have installed a gui 710 server
i want to enter a string for the snc field at the end of the installation
Can anyone assist me with this?
Regards,
MosheThe SNC Name contained within the system entry can be set in the saplogon.ini file. Is that the area you're talking about?
-
SAP Router configuration on Linux platform (error in start script)
Hello gurus,
I´m trying to setup the saprouter on Fedora v14 (32 bits).
I did all the configure with root user. The problem is when I run the script that starts the saprouter service, it show me the following error:
[root@saprouter sap]# pwd
/usr/sap/saprouter
[root@saprouter saprouter]# saprouter_start
/usr/sap/saprouter/saprouter_start: line 12: syntax error near unexpected token `|'
'usr/sap/saprouter/saprouter_start: line 12: ` | tee -a $LOGFILE &
The content of this script, has the following sintaxes:
# Start saprouter
# You can automatically start SAProuter when you start the system. In UNIX for example, you would change file /etc/rc.
# saprouter CN=saprouter, OU=0001214237, OU=SAProuter, O=SAP, C=DE sapserv2
SRDIR=/usr/sap/saprouter
LOGFILE="usr/sap/saprouter/saprouter_log"
if [ -f $SRDIR/saprouter ] ; then
echo "Starting SAP Router" | tee -a $LOGFILE
$SRDIR/saprouter -r -R $SRDIR/saprouttab -G $LOGFILE -W 60000 -K "p:CN=saprouter, OU=0001214237, OU=SAProuter, O=SAP, C=DE"
| tee -a $LOGFILE &
fi
The strange of this is I already did this type of configuration on Linux with the same scripts... but in red hat enterprise linux x86_64 and in there it works perfectly!
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/4f/992ce8446d11d189700000e8322d00/frameset.htm
Can you help me please in way to solve this problem...?!
Best regards,
João Dimas - PortugalHello Clebio,
First al all, please don´t forget to read my previous message.
I´m writing again because I made other tests that I would like to show you...!
1- In my previous message I mentioned an error when I ran directly the command # saprouter -r... and as you recomend, I typed the "ldd saprouter", the output of this show that libstdc+.so.5: was not found! I already solve this issue, I installed the compat-libstdc+ with # yum install compat-libstdc++. So... now when I run that "ldd saprouter" the result is:
[root@saprouter saprouter]# ldd saprouter
linux-gate.so.1 => (0x003a9000)
libdl.so.2 => /lib/libdl.so.2 (0x00911000)
librt.so.1 => /lib/librt.so.1 (0x00918000)
libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x00110000)
libm.so.6 => /lib/libm.so.6 (0x00923000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00966000)
libpthread.so.0 => /lib/libpthread.so.0 (0x008f4000)
libc.so.6 => /lib/libc.so.6 (0x00768000)
/lib/ld-linux.so.2 (0x00747000)
It seems that is solved! Is not it?
2- After that correction, I ran again the # saprouter -r but now it show me the following error:
[root@saprouter saprouter]# saprouter -r
trcfile dev_rout
no logging active
*** ERROR => invalid lines in './saprouttab', see 'dev_rout' [nirout.cpp 8006]
... next, what I did was, I opened the dev_rout:
trc file: "dev_rout", trc level: 1, release: "700"
Thu Aug 11 13:10:49 2011
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
main: pid = 9808, ppid = 2038, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
*** ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7775]
*** ERROR => SNC field without SNC active, skip line 3 [nirout.cpp 7775]
*** ERROR => SNC field without SNC active, skip line 8 [nirout.cpp 7775]
... and I also checked my saprouttab in there I see...:
1. vim saprouttab
# SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KT "p:CN=saprouter, OU=000121987, OU=SAProuter, O=SAP, C=DE" 81.193.132.663 3299
# SNC connection to local system for R/3-Support
# R/3 Server: 192.168.34.178
# R/3 Instance: 00
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.34.178 3200
# Access from the local Network to SAP
P * 194.39.131.34 3299
# Deny all other connections
#D * * *
What´s the problem!??! I don´t get it!! My God... I don´t understand, all the entries in saprouttab seems well to me! Can you verify this please?! It´s correct, isn´t it?
Can you help me!?
Thank you
João Dimas - Portugal -
Password Field not mapped between Request and Provisioning Form
Hi to all. I'm working with OIM 11g. I've faced a strange issue. I'm not sure I'm working properly, so let me explain you my case. In my installation I've got the SSH connector, which is correctly connected with the physical resources. I've loaded the resource dataset ProvisionResourceSSH User bundled with the connector. Consider now that the user "goofy", with "ALL USERS" role, tries to make a request Provision Resource SSH User (Request Based provisioning). He fills in all the field in the appropriate manner, but when OIM triggers "Create User" provisioning task, after the required approval process, the password field is always blank (although goofy filled it in!!!).
I've thought: "ok, it seems a role trouble". And effectively, if goofy has got also the role "REQUEST ADMINISTRATORS", the provisioning form shows the password field correctly valued (as goofy stated in his request).
Note that all the fields are correctly mapped between request dataset and the provisioning form (I'm using the original dataset and the original provisioning form installed by the connector). So all other fields filled by goofy on the request form (request based provisioning) are correctly passed to the provisioning form. All the fields, except for the password.
Am I wrong in something? How Could I make possible to pass the data filled on the request for the password field to the provisioning form even if the requester has not the role "REQUEST ADMINISTRATORS"?
Thank you in advance for the help.This sure seems goofy! ;-) ... can you try making the ALL Users have all the permissions on the Resource Object and the Process Form and test it out? Also try from the backend at the database and see if the table has NULL for the password field? ... What's the type of password field in the dataset and the process form? Encrypted/Secret at both ends or mis match? Try making them plain text both the places as well.
-Bikash
Maybe you are looking for
-
Can't upload photo with Flash player
Here's a 24 second video documenting the problem: http://www.youtube.com/watch?v=-wx10t-A3AU I have a Retina Macbook Pro running Mountain Lion 10.8.1. Brand new computer. The take a photo feature that uses Flash does not appear to work on Tumblr. I h
-
Running INSERT into SQL Server using Heterogeneous Services
I am running into a show stopping issue trying to insert into a SQL Server table via Oracle. Basically, I have my Heterogeneous Services set up correctly and I am able to hit the SQL Server database with my INSERT statement. But what is happening is
-
How can i pay off a balance using itunes gift card?
i have a balance of about 16 dollars, and i got a 15 dollar gift card, how can i use it to pay off the balance?
-
NEED HELP WITH RESOLUTION AND QUALITY?
hi guys i have been making these vector type portraits in photoshop for the last couple weeks, it has all been going well until, when some one puts it up as a display picture on facebook etc the quality is not as good as when i just view the picture
-
Linksys WAG325N connection drop
I've bought good router (Linksys WAG325N) few days ago and with Tiger all work perfectly. The problem is with Leopard from 10.5 till 10.5.2. The connection to the router every 1 or 2 hour drop, I have to turn Airport off then turn on again to bring c