SNC Router settings and configuration

Hi All, I wanted to open ports only for Production Server in my SNC Router and not for my Other servers please help me how can I configure SNC Router settings for the same. And also please send me the configuring steps of SNC router from SAP notes PDF. I will be thankful for it.
Regards,
Prashant Chauhan

Hi Rupali,
Thanks for ur reply, I had tried by doing the same settings but it did not worked, below is my current setting of SNC Router, here my SOLMAN Server IP is 192.168.1.135 & my Production Server IP is 192.168.1.84, and when I am using SAP Router string I am able to access all my other servers like Quality, Development or BIW. So I want to restrict those access & want to allow only my Production server. Please help.
P * * *
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.135 3299
#Permission entries to check if the connection is allowed at all
#P sapserv2 194.39.131.34 3200
#P sapserv2 172.168.1.228 3200
#P sapserv2 124.247.200.231 3200
#P * sapserv2 3299
P * 192.168.1.135 3209
P * 192.168.1.135 3299
P * * *

Similar Messages

I have bought a wireless router WRT150N and configured it...

I have bought a wireless router WRT150N and configured it. I have a DSL Cable modem. I am not able to connect to Internet sites (even when connected to the router through cable). I have a VPN client in my laptop and i am able to connect it. after connecting the vpn i am able to browse all the sites. why i am not able to browse the sites without connecting the vpn? If i directly connect to the modem (i.e without router) i am able to browse.
Is there any configuration settings i am missing out?

Yes i think you are missing some configuration setings on the router ....
As it is a DSL connection .... you can use this link to configure the router using DSL connection ....

How Clean ip Route Table and configuration

How Clean ip Route Table and configuration?
Cisco have any best practice?

Hey Juan,
your question is not very clear but i believe you want to know how to clean ip route table and configuration. So:
1. Cleaning IP routing table - clear ip route * - This will refersh the routing table.
2. Cleaning configuration - It depends on the device however in most of Cisco devices you may clear the startup configurtion and its done :)
HTH.
regards,
RS.

MM - Basic Settings and configurations

Hi Folks,
Please tell me what are all the Basic(General) settings and configurations to be made during a Standard SAP Implementation, as a MM Consultant. Please give them in order.
-Pallu

hi for basic setting u canrefer first thread of the MM forum
New to Materials Management / Warehouse Management?
now for the settings u can also refer the building block notes
for MM refer following
http://help.sap.com/bp_bblibrary/600/html/J05_EN_IN.htm
for CIN use following link
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/cin%252bconfiguration
More useful for CINwill be following
http://www.scribd.com/doc/2527809/CINcustomizing-1
regards
KI

WRT1900AC - 2118 Error on Router Settings and Firmware Update

I bought a WRT1900AC in June and it has worked great. I was able to configure it fine after buying it with no problems. I wanted to make an update recently so I logged in and found that I couldn't access the router settings. When I tried I would get an error 2118.
At first I only got the error when clicking on "Connectivity" but was able to access "Troubleshooting". I powered off/on the router and everything still worked at this point except I was now getting the error on all router setting options Connectivity, Troubleshooting, firmware update msg that would display at the top of the admin panel. I tried more reboots/resets and nothing error error error.
I contacted Linksys support and after being on the phone ALL day they deteremined that the router must be defective. I brought the router back to best buy and they gave me a new one. Now I bring this one home and right out of the box the msg I get is "Your router was not successfully setup" and the error at the bottom is error 2118. I have tried rebooting/resetting and I can never get past this screen. After a reset I have tried to choose to configure manually and am able to login to the admin panel but I get the exact same error as with the original one error 2118 on any of the Router setting options and again it is displaying that there is a firmware upgrade available but I get the error 2118 and I click on "update". I have even followed the instructions on trying to use TFTP to update the firmware but all I get is "Unable to get a response from the server".
Right now the status is my internet works and my wireless works but only with the orginal network name and password since I can't change it.
FYI - Tech support kept pointing to my browser but I have tried from several devices and same issue.
Tried from:
winxp - IE8, firefox, chrome
windows7 - ie, firefox
ubuntu 12.04 - firefox
ubuntu 10.04 - firefox
Cleared caches and rebooted on all and same issue on all. My last linksys router went 7years 0 problems, ah man this sucks if anyone can help I would be grateful.

Thank you so much for replying.
Working from win7 IE11
-windows firewall disabled
-antivirus software firewall disables
-disabled anitvirus software
-disabled browser security add-ons
-cleared browser cache & ran ccleaner
-added linksyssmartwifi.com and 192.168.1.1 to compatibility view
tried accessing linksyssmartwifi.com and am getting "Your router was not successfully setup"
tried steps when connected from wifi or LAN Port 1
Have tried the same steps but selected to configure manually so I could login with local access. I can access any of the Smart Wifi Tools but I can't access anything under "Router Settings' ie: Connectivity, Troubleshooting, Wireless or Security. I get the error 2118 so even though I have downloaded the firmware update to my desktop I can't upload to router since I can't access that page. Also if I click on the New Firmware available click here link I get the same 2118 error.
When I click on details of the 2118 error it reads:
http://linksys.com/jnap/router/GetWANStatus2 : {} -- Status: 200 OK Content-Type: application/json; ...

My ipad pick ups the wi-fi signal but not the router settings and therefore will not connect to the internet, what am I doing wrong?

I only bought the Ipad 2 yesterday, and as of yet have been unsuccessful with connecting the Ipad to the internet. I have followed all of the instructions provided and have contacted both the provider of the Ipad and my internet service, all to no avail! The Ipad shows that it is connected to the wi-fi but on checking the details on the selected IP address the number begins with 169 (I understand that this could be the problem) however when you ask for "renew lease" it doesn't change the number. The Ipad is also not picking up any of the router details. Hope I've provided enough info for any help!

The problem could be due to your router or your iPad. To isolate the problem test your iPad on some other networks.
If it has problems on other networks your iPad probably has a problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the iPad problem. If that does not help your iPad may need repair/replacement. Contact Apple to resolve.
If the iPad does not have problems on other networks the problem may be in your router. You could try restarting your router (remove power to it for 30 seconds and restart) to see if that helps, however, there could be a firmware problem in your router. Check the manufacturer's support Web page to obtain the latest firmware for your router.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.
See also http://support.apple.com/kb/TS1398

Settings and configuration for APO SNP?

Hi,
we want to use SNP in the future.
Which configuration must be done in the APO customizing?
Which data must be transferred from R/3 to APO?
Does anybody has a kind of check list for the necessary settings?
Thanks,
Michael

Ken,
Ever since SAP discontinued the SCM 5.0 Best Practices, I have never seen all the APO building blocks that actually still exist all stored in a single place by SAP. I have to hunt around to find them.
RDS solutions (which sometimes include APO Building blocks) can be downloaded at
https://websmp206.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=INTRO_SWDC_IU_PSP&V=INST&TA=ACTUAL&
provided you have adequate authority. Most of the building blocks that can be downloaded at the above link have also been published "somewhere" in help.sap.com. Also, you occasionally see a non-RDS BB in help.sap.com. So, when I want to find APO building blocks, and I can't find them under RDS solutions, I go into Help.sap.com and start using the search feature (the "Global search" on the home page, not Trex search).
If in your travels you ever find a 'centralized' repository for all APO BB docs that is publicly available, please publish it in SCN, because I am sure that many SCN readers would find this info valuable.
Best Regards,
DB49

PS Generic settings and configuration

Dear all,
I am configuring the PS module for project based industry (ETO).
I have J12 and J214 config guides from SAP building block library describing the generic settings for PS module.
Are these two docs are sufficient to configure entire PS module / settings?
Pl sggest me if any other useful / important doc exists in the similar context.
Rest all other modules are being configured by different module leads.
Pl dont give ref of SAP help as I am already refering to it but it is very general and covers all the scenarios which is canabalizing the things.
The useful answer will be awarded with full marks.
Thanks in advance.

Hi
If furthur details. Check out Business partner id and password from your company
So from there u can get COOK BOOKS, which will be very much useful for understanding PS and do config
- Pithan

Oracle settings and configuration for PS

I am attempting to install PeopleSoft 9.0 CRM etc on an Oracle database. I have a new PC (IBM T41) 1 GB RAM 1.6MHZ CPU.
I have downloaded Oracle 10x, PS 9.0 apps, Tuxedo, BEA, IIS 6.0.
All, except PS has been installed successfully.
Question: What are the settings in Oracle that need to be configured in order to get PeopleSoft 9.0 running. [I am not a DBA and do not know the specifics to get Oracle configured properly]
Is there anyone out there who is able to guide me, either through documentation or a response to this post?
Charles Cohorst

Network configuration assistant may have created at least two out of the four listed files at your ORACLE_HOME/network/admin directory:
tnsnames.ora
sqlnet.ora
It can configure, if required the listener.ora and ldap.ora files. Same issue at your ORACLE_HOME. It is important to make sure those files are properly located, otherwise you won't be able to connect to your instance, and if required, your listener won't be properly configured.
If you want further details on how to configure these files and what the required entries mean, you may want to read the Configuration and Administration of Oracle Net Services reference manual: http://download-west.oracle.com/docs/cd/B19306_01/network.102/b14212/part2.htm#i436475
~ Madrid.

Can Transport Visual Admin Settings and Configuration?

Hi all,
I'm using EP 7.0 and SP13. Due to reinstallation of our server i need to export all the configuration setting of Visual Admin.
Exported all the visual Admin configuration by using Tool-->Export.
while exporting the corresponding zip file automatic stored in the server path C:\usr\sap\Server Instance No\JC00\j2ee\admin\J2EE Engine Configuration.zip
But i dont know how and where to import the J2EE Engine Configuration.zip again into server .
what can i do..
Regards
Thillai J

Thillai J
This question is marked both answered and u2018not solvedu2019.
In case you are still looking for an answer, Config Tool Export and Import should be used instead of Visual Admin.
Hope this helps.
PJ

I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

Hello. First time using this. Still trying to figure out how to post my questions. I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

If you are using cable and a Nethear router sounds like from the information you provide before your Airport setting are setup improperly. PPoE is not something a cable service would need to work. Fallow the steps I will provide bellow, I will add some screen shots also to assist if necessary.
1 - Open System Preferences from  (Menu)
2 - Click "Network"
3 - From the Network window you are going to wanna make sure Location is : Automatic and Show is : Airport
4 - Once the Show: Airport is select you should see a window like this, my window is selected for Ethernet simply because I am no longer running Tiger but the window will look the same.
5 - You will want to click on the PPPoE tab and you should see this
6 - You're gonna wanna make sure " connection using PPPoE " is not select, if it is make sure to uncheck this option
7 - Once this is uncheck make sure to click "Apply Now"
8 - You will want to click back on to the "TCP/IP" tab and make sure IPv4 is set to " Using DHCP "
9 - If the option to " Apply Now" is available again please click this
10 - Once this is done go to your Aiport Menu and see if your network is listed and select your network and eneter the password if necessary.
11 - If after these steps you still have issues I would recommend Power Cylcing your Router and Modem for about 5 minutes
12 - Make sure all lights are off when unplugging the Router and the Modem
13 - Some Modems have backup batterys so you may have to push in a tiny button on the back with a pin

How can I get the apple configurator to retain a devices settings and apps?

Hi there all!
I have an iPhone that already has apps and email settings on it. I want to use the configurator to stop the device being paired with anything else not allow it to connect to any other Macs. I've connected it, backed it up, enabled supervision, then deployed the profile. Through out all of this I never get the option to restore device settings and when I click on edit stored backups, it contains nothing. With supervsion disabled I can restore the backup but, snag is to disallow pairing it needs to be supervised.
Also, am I right in thinking that once it's supervised I can't install any apps directly from the device ?
Sorry if these are really noddy questions :-) I just want to stop the device from being able to connect to or pair with anything other than my mac.
Thanks
Will

Jpegs can't have transparent areas. Most likely you had layers and were forced to save "as a copy", which means that the image which remains open in PSE is not the jpg. A file saved as a copy makes a copy in the save format, but it's not like save as where you now see the newly saved version instead of the original. The original remains open and unsaved onscreen.

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings.

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings. A simple set of instructions would be greatly appreciated.

How to Port Forward on AEBS

Verizon Quantum Gateway Router settings issue related to printing and wifi cameras?

Hi,
I have a Verizon Quantum Gateway router and I just did a fresh install of Windows 8.1 Pro x64 and am downloading and installing my printer drivers. I connect the printer to the wifi network, 100% sure it is connected and settings are set to wireless lan. I've had this printer for a while. Doing the setup - it cannot find the printer.
Related: I bought a 2 pack of Motorola Focus66 wifi cameras to watch my dogs when I'm gone. I can connect to the cameras when I'm on my ipad's Verizon Wireless LTE connection, but when I'm at home connected to my same Verizon Fios wifi I cannot view cameras. Yes - the camera and apps support local and remote connections.
I have turned the firewalls all the way off and this does not fix the problems, so I'm believing it is in the router settings. Any suggestions?

I had a wifi network running at my house with a PC, Laptop, 5 iphones an iPad, and an XBox all running with no issues.. I got the "Upgrade" of the Gateway router and I can connect those devices to the network but WiFi printing is screwed up and Air Printing the apple devices is totally dead.. cannot see the printer. The customer support are completely a waste.. they suggested I pay for "Premium Support" At this point I've invested a solid 10-15 hours trying to get this setup and talking to Verizon and its just a mess.

WRT310N No Way To Setup and Configure Router. CD Setup No, Web Based Setup No

Purchased New WTR310N yesterday. LESA does not run from CD. Web based Setup Page Will Not Load. Did two 2 hr Remote Setup sessions so far with Linksys Techs in Phillipines and India. After 1st Tech was done, nothing would connect to router. Tech tried to setup our 4 PCs by setting up one as a server and using ICS to setup the rest. Tech disabled TTP, DHCP, ete everything that works as a home network. I think Tech also setup a password and user name on Router without telling me. I had to spend 2 hrs using Vista and XP Wizards to setup a router network, both wired and wireless. Since Router is not configured yet can only access unsecured wireless networks. But 2 wireless printers do not work yet. Tech today was excellent in India. She reinstalled my Linksys USB Wireless Adapter that I use to print with. Still not printing, and green light not coming on, on USB Adapter. Tech managed to upgrade Router Firmware, but could never get web based router setup to load. Got the password and user name box to show up once, but admin and blank username does not work. My XBox 360 installed in 15 seconds and is fast so Router working fine. So need help with getting Linksys USB Wireless Adapters to access wireless printers and somehow get router admin pages to load so I can turn on WEP and type in our WEP Code. Last router was Linksys 54G, all worked fine for years, then quit working so got new router. Any ideas before I try calling Tech Support again, thanks.

As you want to make the network secured but the admin password is not working....You have to reset the router and re-configutre it again...
Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

SNC Router settings and configuration

Similar Messages

Maybe you are looking for