SNC5.1- How to Publish multiple line items in SNC Web UI (Supplier view)
Hi Experts,
I am working in SAP SNC Supplier Collaboration project. I have a scenario where i am trying to "Publish PO" for multiple line items in Web UI. I am able to confirm each PO line item and Save PO. But if i try to publish one line item at a time, then the system publishes the 1st line item and it does not allow me to publish the remaining PO line items.
All i can do is, Confirm and Save all line items, and then "publish" it at the end. In this way,i can view all the confirmed line items (POA) in SNC. But how do I Confirm/Save/Publish each PO line item?
Appreciate your help.
Regards,
dmohite
Hi dmohite,
As the POC standard process Supplier should give confirmation for all PO items after confirmation of all items it should allow to Published the PO at Header level.
If supplier does not give confirmation for all items it should not allowed to Published the PO at Header level but you are able Published the PO at header level without confirmation of all PO items.
You can implement note no: 1320445 (manual implementation is required).
After implementation of this note without confirmation of all PO items it won't allow to publish the PO at header level.
Please let me know for any clarification.
Regards,
Nikhil
Similar Messages
-
How to insert multiple line items in fv60 using bdc.
Hi all,
How to insert multiple line items in fv60 using bdcshi
chk this
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_EBELP(30) , V_MENGE(30) , V_WERKS(30), V_EMATN(30) ,
V_PEINH(30).
DATA : FILE TYPE STRING, V_MSG(100) , V_IND(2) TYPE N , FLAG VALUE 'X'.
PARAMETERS: P_FILE(50) TYPE C DEFAULT 'C:\ME21_TEST'.
DATA : BEGIN OF ITAB OCCURS 0,
IND(02),
LIFNR_001(010),
data element: BSART
BSART_002(004),
data element: BEDAT
data element: EKORG
EKORG_004(004),
EKGRP_006(003),
data element: LPEIN
LPEIN_005(001),
data element: EMATNR
EMATN_01_007(018),
data element: EWERK
WERKS_01_008(004),
data element: EPEIN
PEINH_01_009(006),
data element: EWERK
MENGE_01_013(017),
data element: AUFEP
EBELP_014(005),
data element: AUFEP
END OF ITAB.
START-OF-SELECTION.
FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT ITAB BY IND.
START-OF-SELECTION.
LOOP AT ITAB.
REFRESH IT_MESSAGES.
<b>V_IND = V_IND + 1.</b>
<b>AT NEW IND.</b>
<b>READ TABLE ITAB INDEX SY-TABIX.</b>
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0100'.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
ITAB-LIFNR_001.
PERFORM BDC_FIELD USING 'RM06E-BSART'
ITAB-BSART_002.
*perform bdc_field using 'RM06E-BEDAT'
ITAB-BEDAT_003.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
ITAB-EKORG_004.
PERFORM BDC_FIELD USING 'RM06E-LPEIN'
ITAB-LPEIN_005.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
ITAB-EKGRP_006.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
ENDAT.
<b>PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN.
PERFORM BDC_FIELD USING V_EMATN
ITAB-EMATN_01_007.
CONCATENATE 'EKPO-WERKS(' V_IND ')' INTO V_WERKS.
PERFORM BDC_FIELD USING V_WERKS
ITAB-WERKS_01_008.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING V_PEINH
ITAB-PEINH_01_009.
*CONCATENATE 'EKPO-MENGE(' V_IND ')' INTO V_MENGE.
*perform bdc_dynpro using 'SAPMM06E' '0120'.
*perform bdc_field using V_MENGE
ITAB-MENGE_01_013.
*CONCATENATE 'EKPO-EBELP(' V_IND ')' INTO V_EBELP.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING 'RM06E-EBELP'
ITAB-EBELP_014.</b>PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
AT END OF IND.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BU'.
ENDAT.
CALL TRANSACTION 'ME21' USING IT_BDCDATA MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_MESSAGES.
LOOP AT IT_MESSAGES WHERE MSGTYP = 'E' OR MSGTYP = 'A'.
IF FLAG = 'X'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'GAMY_FAILURE'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR FLAG.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'ME21'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGES-MSGID
LANG = 'EN'
NO = IT_MESSAGES-MSGNR
V1 = IT_MESSAGES-MSGV1
V2 = IT_MESSAGES-MSGV2
V3 = IT_MESSAGES-MSGV3
V4 = IT_MESSAGES-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
WRITE : / V_MSG.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
ENDLOOP.
IF FLAG NE 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA. -
How to Update multiple line Items in Sales order Interactive form
Hi,
I have created one online interactive form for sales order. In that I incorporated dynamic table logic .i.e. we can add row and delete row using buttons. Interactive form is working fine with one line item. But if I give multiple lines in table (line item) its creating sales order with single line item. So please help me how to pass multiple lines.
Thanks & Regards,
Krishna.Hi,
Check out this link, this deals with the problem you are facing.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal -
How to handle multiple line items in lsmw
hi all,
how can i handle multiple line items in lsmw either by using direct input method or BDC recording.
first preference is Bdc recording in lsmw . can u tell me the steps in detail.
thanks,
harini.cHi Harini,
Check this link.
BDC - Header with multiple line items.
Regards,
Arun -
How to Create multiple line items
Hi
I have created a web dynpro application that accesses BAPI_REQUISITION_CREATE to create a requisition. The application so far creates a requisition with only one line item.
How do I capture details about multiple line items from the user before submitting the form to create the requisition.
Thanks in advance for your help.
SriramHi Sriram,
Create a form where u enter the requisition details of one line item.Suppose say if u have a button Add another Line Item on click of that fill a value node say
RequsitionDetails of cardinality 0-n and clear the form.If u want u can also show the added item in a table below by bindin the data source to RequistionDetails. Now the user can enter another line item in the form.Similarly now he can enter multiple line items.On click of Submit u submit the records in the RequistionDetails node.Add all these records to the table parameter which u r passing.
BAPI_REQUISITION_CREATE_Input input = new BAPI_REQUISITION_CREATE_Input();
wdContext.node<<>>.bind(input);
for(int index=0;index<wdContex.nodeRequsitionDetails().size();index++)
zTestStruc test = new zTestStruc();
test.setattr1(wdContex.nodeRequsitionDetails().getRequsitionElementAt(index).getattr1());
input.add<<>>(test);
Hope this solves.
Regards,
Sowjanya. -
LSMW - ME21 How to map multiple line items
Hi all,
I am using LSMW tool with batch input recording technique to create POs via ME21. I have defined source structures as HEAD with POSI as its subordianted structure. This settings worked perfectly for one single item line. However, it created a new transaction for each line item in the file. I did some searches in this forum and I noticed that someone suggested to dynamically set the line positon at the processing points. I tried a few times and could not get it work. Anyone knows how to map multiple items in LSMW, please help.
Here is part of my recording:
EKPO-EMATN(01) 000995NM
EKPO-MENGE(01) 1 RM06E-EEIND(01) 2006.04.27 EKPO-NETPR(01) 10 EKPO-WERKS(01) 0001 EKPO-LGORT(01) 0001
My input file looks like this:
H 77777400 NB2006.05.140001001T
L000995NM00000000052006.05.15 1000010001CAON
L000998NM00000000052006.05.15 1000010001CAON
H 77777400 NB2006.05.140001001T
L000995NM00000000052006.05.15 1000010001CAON
Thanks!Hi
If you have used a b.i. recording, all abap code is inserted in std table /SAPDMC/LSGBDC.
The program to generate the B.I. session is automatically created when you run "Create Batch Input Session" step.
What means the numbers of items you can insert depend on the totals of items you have used while creating your b.i. recording:
If you have simulated to insert only one item, you'll be able to insert only one item in your project.
So you should simulate to insert severals items not only one, but I think it should be better you use a std method to create PO by LSMW:
- Std B.I: object 0085, method 0001 (RM06EEI0);
- BAPI : object BUS2012, method CREATEFROMDATA1
Max -
How to Print Multiple line items(only the one's that are selected in va22)
Hello All ,
My smartform should print the multiple selected line items that i as a user should be able to see as the output .
In my case i dont have any program that calls the transaction va22
directly from the transaction VA22 i give the ISSUE OUTPUT TO .
The Driver program that calls my smartforms fetches the data from table VBAP .
Two cases that i get because of this fetching logic .
1. When i try to fetch the data based on only VBELN in the output i get all the items that are in the particular Quotation .
2 . When i try to fetch data based on VBELN and POSNR in the ouptut when i select multiple items and give print the first item that i i selected is displayed .
Now what i need is to print only those data that i select in VA22 .
say if there are items A, B , C, D ,E in the Quotation .
and before printing i select A , C , D then only those items should be printed .
I hope any one of the Experts can solve my problem .
Thanks & Regards
FaranHi
I think you will need to do some enhancemwnt for this. What you can do select the lines in table comtrol and before issuing output you need to find a suitable wnhancement place where you can export the selected lines and make the corresponding change in logic for the same?.
Secondly uou can make a custom report also where user will select lines of po and print..but in this way you will need to many calculations
Nabheet -
How to Restrict Single Delivery Date for PO with Multiple Line Items
Dear Experts,
How to Restrict Single Delivery Date for PO with Multiple Line Items.
System needs to through Error Message if User Inputs Different Delivery Dates for PO with Multiple Line Items in ME21N Tcode.
Can we achive this by Some Enhancement in SAP or Not ???
If so how to do it.
Any Inputs is highly appreciated.
Thanks and Regards,
Selvakumar. MHi Selvakumar,
we can resrict the PO to have a single delivery date in all the line items by means of giving a error message or overwiting the delivery date keyed/determined in the line item.
You can use the BADI -> ME_PROCESS_PO_CUST. In which you need to implement the method PROCESS_SCHEDULE.
(for technical aid - This method will be called for each and every PO line item, From the imporing parameter im_schedule we can get all the details of current PO line, even we can change the data in the current PO line. )
Regards,
Madhu. -
How to implement bapi for transaction code f-02 for multiple line items
Hi All,
I am having one requirement to of implementing bapi for tcode f-02.
I have identified the name of the badi e.i. BAPI_ACC_GL_POSTING_POST.
but i dont have any idea how implement it.
i have multiple line items for one header.
Please help me in this.
Regards,
Shoaib.HI
In recording once u save, the recording comings out the transaction.
If u want the pop-up to display before save. Then in recording also
after entering all data and before Save press enter or do check.Try
this way after that save the transaction.
Regards,
Raghu. -
How to draw horizontal line at the end of table for multiple line items
Dear Experts,
Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh ManoharanHi
I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
line type 1
line type 2 -
How to handle the multiple line items in the Inbound idoc FM
Hi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
BharaniHi ,
Can any body give me how to handle the multiple line item in the idoc when we reprocessing it from workitem....
Thanks in Advance,,,,
Regards,
Bharani -
Itunes - how do i select multiple line items not in sequence ?
itunes - how do i select multiple line items not in sequence ?
Hold down the Command key and click each in succession.
To extend the selection across items that ARE contiguous, use the Shift key. -
Where/ how do I set SNP to create Planned orders with multiple line items?
Hi
Currently our SNP is generating planned orders on a daily basis, it creates a single order with a single line item per location.
Where/ how do set SNP to create planned orders on a daily basis to generate a single order with multiple line items per location, so therefore one planned order with multiple line items for a single location.
Thanx
KeeganHi Keegan,
In SNP (APO) it is not possible to create order with multiple line items.
But you can do some settings so that while planning system can do aggregation and disaggregation.
But your requirment should be set on Aggregation/Dis-aggregation logic.
Please follow the follwing links:
http://help.sap.com/saphelp_scm2007/helpdata/en/2c/c557e9e330cc46b8e440fb3999ca51/content.htm
Aggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/42/f731d078e73ee4e10000000a1553f6/content.htm
Disaggregation:
http://help.sap.com/saphelp_scm2007/helpdata/en/a6/ebefaf32e22e468355da304cc59387/content.htm
Please be sure that the setting of this logic will be at planning area level.
You can't change aggregation/disaggregation logic further.
Regards,
Santosh -
How Can I Create One Entry Sheet For Multiple Line Items of A PO
Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO
hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi -
Setting the value of a single attribute for multiple line items
Hi all,
I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
TYPES: BEGIN OF t_kblp,
fipos TYPE kblp-fipos,
kostl TYPE kostl,
END OF t_kblp.
DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
wa_kblp LIKE LINE OF lt_kblp,
lt_bseg TYPE STANDARD TABLE OF bseg,
wa_bseg TYPE bseg.
DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
lo_api_controller TYPE REF TO if_wd_controller,
lo_message_manager TYPE REF TO if_wd_message_manager,
lo_nd_tbseg TYPE REF TO if_wd_context_node,
lo_el_tbseg TYPE REF TO if_wd_context_element,
lt_el_tbseg TYPE wdr_context_element_set,
lv_bseg TYPE bseg.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
RECEIVING
message_manager = lo_message_manager.
lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lt_el_tbseg = lo_nd_tbseg->get_elements( ).
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
lo_el_tbseg->get_static_attributes(
IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
fipos
kostl
PSPNR
geber
saknr
fkber
grant_nbr
gsber
FROM kblp
inTO corresponding fields of wa_kblp
WHERE belnr = lv_bseg-kblnr and
saknr = lv_bseg-saknr.
ENDSELECT.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
* get element via lead selection
lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
lo_el_tbseg->set_static_attributes(
EXPORTING static_attributes = wa_kblp ).
CLEAR: lv_bseg, wa_kblp.
ENDLOOP.
everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
lo_el_t_bseg->set_attribute(
name = `PROJK`
value = wa_kblp-pspnr ).
but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
Thanks,
Rajat Garg
Edited by: rajatg on Jun 24, 2011 5:09 PMHi Chris,
I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
lo_el_tbseg->get_static_attributes(
IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
fipos
kostl
PSPNR
geber
saknr
fkber
grant_nbr
gsber
FROM kblp
inTO corresponding fields of wa_kblp
WHERE belnr = lv_bseg-kblnr and
saknr = lv_bseg-saknr.
ENDSELECT.
move: wa_kblp-belnr to wa_bseg-kblnr,
wa_kblp-fipos to wa_bseg-fipos,
wa_kblp-kostl to wa_bseg-kostl,
wa_kblp-pspnr to wa_bseg-projk,
wa_kblp-geber to wa_bseg-geber,
wa_kblp-saknr to wa_bseg-saknr,
wa_kblp-fkber to wa_bseg-fkber,
wa_kblp-grant_nbr to wa_bseg-grant_nbr,
wa_kblp-gsber to wa_bseg-gsber,
lv_bseg-dmbtr to wa_bseg-dmbtr.
append wa_bseg to lt_bseg.
lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
get element via lead selection
lo_el_edit_property = lo_nd_edit_property->get_element( ).
lo_el_edit_property->set_attribute(
name = `EDIT_FIELD`
value = 'ABAP_TRUE' ).
lo_el_edit_property->set_attribute(
name = `EDIT_WBS`
value = 'ABAP_TRUE' ).
endif.
endloop.
o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
get element via lead selection
lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
CALL METHOD lo_nd_t_bseg->bind_table
EXPORTING
new_items = lt_bseg.
Can you please see what I am doing it wrong here....
Maybe you are looking for
-
Okay I need your help guys. I have a 2008 Imac, which means it uses Mini-DVI output. what i want to know is, can i use this as an input for my PS3 using a Mini-DVI to HDMI adapter so i can play PS3 on my imac display? http://www.amazon.co.uk/Apple-Mi
-
I have a document that contains PDFs of various Word docs (it is a LONG and frustrating story). When these PDFs are revised and I update them in the InDesign file, they tend to re-size, usually larger than 100%. To prevent this, I have tried a couple
-
Looking for a wireless audio from any source`
I have an Apple TV, iPhone 6, and Dell PC. I am shopping for a self-amplified speaker system which can WIRELESSLY stream audio over my home WIFI network (probably not Bluetooth) for BOTH the following: MUSIC AUDIO, from ITunes, Spotify, apps from i
-
Oracle apps financial associate consultant responsibilities
HI, what are the associate consultant roles & responsibilities? Thanks prasad.
-
Issue ouput option is grayed out in billing doc
Dear All, Issue is regarding the issue output option getting grayed out. unable to view print preview or issue output option as its grayed out in billing document. can anybody guide to resolve this issue at the earliese. valueable i/p's will be great