Snd-intel-hd speakers issue

speakers suddenly stopped working, I checked the volume control and everything is turned up that should be and nothing is muted,
speakers work shortly then get muted,this happens to me on every startup ,i think its a snd-intel driver issue because im having the same issue with other gnu distributions
i need to reboot my box every time this issue happens to fix it

thats happens after playing a video or mp3 file using amarok or youtube after that speakers works during 10 or 12 second then turns off
thanks a lot and excuse me i had a connection issue yesterday
here is the output of : lspci -v | grep -A7 -i "audio"
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Toshiba America Info Systems Device fc50
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at c0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
by the way ,i had this issue on a fresh arch gnome and recently on kubuntu even opensuse but not in windows
Last edited by jambi (2014-03-28 21:05:43)

Similar Messages

Imac intel internal speakers not working windows8

Imac intel internal speakers not working with windows 8 external and head phones work just fine

Macs don't support Windows 8 at this moment. Wait until Apple launches drivers for that new Windows edition

Speakers issue

Hi,
I posted a question about a speakers issue last year. It was rapidly solved.
You can read the subject "Problems with my speakers" to know more, but please answer here as the original subject have been archived and replies are not allowed.
The problem is getting back today but unfortunately, I cannot fix it with earphones, because I don't have any...
I've tried every other solution proposed on this page and nothing does... Is there any other way I can fix this?
Thanks
(Here is the problem as I described it last year
"Hi there.
I use a Macbook Pro and my speakers allways worked perfectly.
But I just watched a video online with a very low volume so I used earphones to hear better.
Then I came up to listen music again in my speakers, but no sound came out. I tried to raise up the volume, but there's an interdiction sign (circle with a diagonal in it) so I cannot lower or raise the volume... In the hole (entry? sorry i'm francophone...) for the earphones there's a red light coming out...
What's the matter? Have I made something wrong?
Thanks for your help" )

Your analog audio switch is stuck if there is a red light on inside the jack. Stick a wooden toothpick in the socket, wiggle it around and see if you can dislodge the switch. If you can't, it will need to be taken apart to service.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Lenovo N100 with Intel Sound Card (Speakers Issue)

Hello.
I was trying to deal with it but no luck on finding any info. The issue is that then I plug external speakers the laptop ones don't mute.
Notebook: Lenovo N100
SoundCard: Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Kernel: 2.6.17-beyond (from official package)
Alsa: 1.0.3 (official package)
Any one had a similar issue with more or less similar hardware?
Peace.

Hi,
I have very similar problem, my speakers are working, but if I want plug headphones into jack plug-in is nothing happen, speakers are still playing and I couldnt hear anything in headphones.
Laptop: HP Pavilion dv2058ea
[root@mariusz ~]# lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
[root@mariusz ~]# uname -a
Linux mariusz 2.6.19-ARCH #1 SMP PREEMPT Tue Dec 12 12:47:42 CET 2006 i686 Genuine Intel(R) CPU T2300 @ 1.66GHz GenuineIntel GNU/Linux
[root@mariusz ~]#
System after "pacman -Suy".
P.S Sorry for my english, i cant write very well.
EDIT
It was simple problem. I had to recompile kernel without ALSA and install the newest alsa-drivers 1.0.14rc1. Now is working. I hope that this will add to Arch, because this what I've done is unusual and temporary.

MacBook Pro 13" Late 2011 Internal Speakers Issue

Every time I use my internal speakers (especially on high voice), my speakers' strength seems to lessen after few seconds of sound. But after about 30 minutes or so, the speakers are back to normal, but the same conflict repeats again after using the speakers again.

You may try a PRAM reset. If that does not resolve the issue, make an appointment at the Apple store Genius bar.
Ciao.

3945BG Intel Adapter PEAP issue

Hi, We have few SONY laptops with this builtin adapter.. Unfortunately, these adapters do not seem to work when PEAP with WinXP, is used with Cisco APs. TAC has already disowned this issue, saying it is a Intel issue. As we are not getting much of support from our Laptop vendor, i am just curious if anyone has this issue and found any good workaround...
If any third party supplicant can overcome this issue, please provide pointers.. We would like to evaluate before purchasing it..
Well, fyi.. i have upgraded the latest firware on Intel.

Checked this link the SONY only support CCX v3 that part of the PEAP may not work w/ Cisco AP.
http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_partners_0900aecd800a7907.html
http://www.cisco.com/warp/public/765/ccx/versions_and_features.shtml
Better check w/ SONY what is their CCX support ver., or try to use other authentication method....
Hopes this help.

OS X 10.4 (PPC or Intel) - opening project issues

I readed some posts on startup problems but it seemed that, first, I got all of them at the same time, second, no one of these posts solved my issues.
     i) If I create a new project I receive that exception:
java.io.IOException: Could not find a safe DOM serializer: java.lang.NoSuchMethodException: org.apache.xml.serialize.XMLSerializer.setNamespaces(boolean)
at org.openide.xml.XMLUtilImpl.write(XMLUtilImpl.java:72)
at org.openide.xml.XMLUtil.write(XMLUtil.java:298)
at org.netbeans.spi.project.support.ant.ProjectGenerator$1.run(ProjectGenerator.java:103)
at org.openide.util.Mutex.writeAccess(Mutex.java:310)
at org.netbeans.spi.project.support.ant.ProjectGenerator.createProject0(ProjectGenerator.java:78)
at org.netbeans.spi.project.support.ant.ProjectGenerator.createProject(ProjectGenerator.java:73)
at org.netbeans.modules.web.project.WebProjectGenerator.setupProject(WebProjectGenerator.java:354)
at org.netbeans.modules.web.project.WebProjectGenerator.createProject(WebProjectGenerator.java:112)
at com.sun.rave.jsf.project.services.WebProjectCreatorImpl.createProject(WebProjectCreatorImpl.java:37)
at com.sun.rave.api.jsf.project.JsfProjectHelper.createWebProject(JsfProjectHelper.java:729)
at com.sun.rave.api.jsf.project.ui.wizards.NewJsfProjectWizardIterator.instantiate(NewJsfProjectWizardIterator.java:77)
at org.openide.loaders.TemplateWizard$Brigde2Iterator.instantiate(TemplateWizard.java:969)
at org.openide.loaders.TemplateWizard.handleInstantiate(TemplateWizard.java:557)
at org.openide.loaders.TemplateWizard.instantiateNewObjects(TemplateWizard.java:396)
at org.openide.loaders.TemplateWizardIterImpl.instantiate(TemplateWizardIterImpl.java:218)
at org.openide.WizardDescriptor.callInstantiate(WizardDescriptor.java:1425)
at org.openide.WizardDescriptor.access$900(WizardDescriptor.java:63)
at org.openide.WizardDescriptor$Listener.actionPerformed(WizardDescriptor.java:1327)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.openide.util.WeakListenerImpl$ProxyListener.invoke(WeakListenerImpl.java:383)
at $Proxy15.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: java.lang.NoSuchMethodException: org.apache.xml.serialize.XMLSerializer.setNamespaces(boolean)
     ii) When I open an already existing jsp page in a project I receive from the designer:
java.lang.ClassCastException: org.apache.xerces.dom.DeferredDocumentImpl
     at com.sun.rave.insync.markup.MarkupUnit.syncEngine(MarkupUnit.java:488)
     at com.sun.rave.insync.markup.MarkupUnit.read(MarkupUnit.java:451)
     at com.sun.rave.insync.SourceUnit.sync(SourceUnit.java:446)
     at com.sun.rave.insync.faces.FacesPageUnit.syncSubUnits(FacesPageUnit.java:223)
     at com.sun.rave.insync.beans.BeansUnit.sync(BeansUnit.java:174)
     at com.sun.rave.insync.live.LiveUnit.sync(LiveUnit.java:288)
     at com.sun.rave.insync.live.LiveUnitWrapper.sync(LiveUnitWrapper.java:115)
     at com.sun.rave.insync.models.FacesModel.syncImpl(FacesModel.java:899)
     at com.sun.rave.insync.Model.sync(Model.java:207)
     at com.sun.rave.insync.Model.sync(Model.java:173)
     at com.sun.rave.insync.ModelSet$WindowManagerPropertyRegistry.processNodes(ModelSet.java:107)
     at com.sun.rave.insync.ModelSet$WindowManagerPropertyRegistry.propertyChange(ModelSet.java:125)
     at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:333)
     at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:270)
     at org.netbeans.core.windows.RegistryImpl.doFirePropertyChange(RegistryImpl.java:249)
     at org.netbeans.core.windows.RegistryImpl.tryFireChanges(RegistryImpl.java:222)
     at org.netbeans.core.windows.RegistryImpl.selectedNodesChanged(RegistryImpl.java:186)
     at org.netbeans.core.windows.RegistryImpl.topComponentActivated(RegistryImpl.java:138)
     at org.netbeans.core.windows.WindowManagerImpl.notifyRegistryTopComponentActivated(WindowManagerImpl.java:893)
     at org.netbeans.core.windows.Central.activateModeTopComponent(Central.java:1401)
     at org.netbeans.core.windows.WindowManagerImpl.topComponentRequestActive(WindowManagerImpl.java:994)
     at org.openide.windows.TopComponent.requestActive(TopComponent.java:553)
     at com.sun.rave.project.jsfloader.JsfJavaEditorSupport.doOpenDesigner(JsfJavaEditorSupport.java:130)
     at com.sun.rave.project.jsfloader.JsfJavaEditorSupport$1.run(JsfJavaEditorSupport.java:115)
     at org.openide.util.Mutex.doEvent(Mutex.java:1024)
     at org.openide.util.Mutex.writeAccess(Mutex.java:330)
     at com.sun.rave.project.jsfloader.JsfJavaEditorSupport.openDesigner(JsfJavaEditorSupport.java:113)
     at com.sun.rave.project.jsfloader.JsfJspEditorSupport.openDesigner(JsfJspEditorSupport.java:87)
     at com.sun.rave.project.jsfloader.JsfJspDataObject$OpenEdit.open(JsfJspDataObject.java:155)
     at org.openide.actions.OpenAction.performAction(OpenAction.java:54)
     at org.openide.util.actions.NodeAction$3.run(NodeAction.java:450)
     at org.openide.util.actions.CallableSystemAction.doPerformAction(CallableSystemAction.java:116)
     at org.openide.util.actions.NodeAction$DelegateAction.actionPerformed(NodeAction.java:448)
     at org.openide.explorer.view.TreeView$PopupSupport.mouseClicked(TreeView.java:1176)
     at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:212)
     at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:211)
     at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:211)
     at java.awt.Component.processMouseEvent(Component.java:5557)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5319)
I tried all the JVM from Apple: 1.5 release 4 and 3, 1.4 too, I reinstalled many times the downloaded application "creator-2_1-mac-ml.command". Last but not least: It happened few month ago on an iMac PPC running 10.4.8, since that I worked on a Intel Core Duo box running 10.4.9 without any trouble.....until two days ago. I didn't updated JSC, nor modified directories, etc...

Working around these issues, I note that within a newly created user account, jsc2 works well.
Looking in the "~/Library" differences beetwen these two accounts, the defective account has a "/Java/Extensions" subfolder and a xerces.jar within. Such jar I believe to be the source of the problems. Putting in trash the /Java/ folder, jsc2 immediately work normally.

Thinkpad W530 and Intel Rapid Start Issue

Hi there, I have a Thinkpad W530 and am having an issue with Intel Rapid Start. When I enable it, it works fine. Once. When I bring the computer back from the S4 state everything is working just fine. But the Intel Rapid Start service disables itself. I have to re-enable it each time I want to use it. Any ideas? Thanks! Charlie Durand

This is happening for me too on my X1 Carbon, having wiped it and installed Windows 8 manually. Rapidstart will work fine the first time I turn it on, but then it'll pretty much say it's done with me until I switch it back to "on" again.
Having to check the manager each time is rather tedious, so I'm going to turn it off (edit:uninstall!) and use hibernation until a fix is published.

Audio and speakers issues with the new iTunes 7

Hi,
I also have an audio problem after installing the new iTunes 7. It seems after iTunes have finished "determining the gapback playback information", all audio from iTunes and Quicktime only comes through my two front speakers. I have a 5.1 setup for my computer and it seems is only a iTunes and Quicktime issue since Windows media plays the audio just fine. Anybody know what the issue could be? I'm on Windows XP by the way.
I have checked my speaker setup and sound card and this problem does not occur in Windows media or any other media software. It seems that it only occurs with iTunes and Quicktime.

Yet another person with the exact same problem, with the same sound card. Everything is up-to-date. I've tried all of the other "fixes" but its either done nothing, or given me use of my rear speakers but added an awful awful ear shattering static. I've tried everything. I even stood on one foot.
Furthermore, my EAX options do not work with iTunes 7 either, though they work with the older versions. I can't even adjust the speaker balance (front to rear, right to left). This is an isolated problem, only with the new iTunes and QuickTime. Everything else on my computer works just dandy, and cooperates with my speakers (5.1 surround) and my EAX settings.
Edited because I said video card, not sound card.. I'm tired, been trying to fix this for an hour.

Intel HD Graphics issue fix

Just wanted to give an update an issue.
My Mboard is a MSI H81 P33 Running 2x2gb 1300 corsair ram and a Intel celeron G1820 on windows 8.1 64
The build was fine no issue installed all updates from Microsoft and the msi live update software. I then started to notice that Google Chrome was slow laggy and very unresponsive. So i switched for a moment to internet explorer no issue. So i tried to drill down the issue in chrome. A lot of user's pointed out that in chrome if you switch of hardware acceleration the issue was resolved.
YES....BUT this did solve the issue but now certain things like youtube were not as responsive and the fish bowl test was slow. So i switched hardware acceleration back on. Chrome went back to its old ways long to load slow page opens etc.
As a last resort i went to the intel driver update page and used the auto scan my sytem feature. It found my diplay driver for the igpu to be out of date installed the new version and BOOM THE ISSUE WITH CHROME WAS SOLVED.
SO WHY IS THE MSI UPDATE GIVING ME AN OUT OF DATE DRIVER if you search slow chrome lots of people have this issue who is at fault moard driver man intel windows chrome. The whole situation now makes me dubious about msi's ability to offer the correct driver's as it still shows 10.18.10.3650 for the vga driver yet intel latest is 10.18.10.3958

http://www.intel.com/p/en_US/support/detect <---- use that link and let it auto detect your graphics core on the CPU and update the driver!

Macbook Pro 2011 Internal Speakers Issue

I just discovered an issue with the internal speakers of my Macbook Pro 2011.
The balance of the left and right speaker is off.
When I move the balance slider all the way to the right only the right speaker is active (as it should be). When I move the balance slider all the way to the left, the left speaker is active, BUT also the right (not as loud as the left one though).
When the slider is set to the middle the right speaker is definitely louder than the left one.
Do you have the same problem?
(2 members from other forums have confirmed this problem)

Ok....I just found this here:
http://support.apple.com/kb/TS3336
Quote:
+"You may notice that when you move the Balance slider in the Sound preferences pane far to the left speaker that you can still hear sound from the right side of the MacBook Pro.+
+This sound is actually generated by the sub-woofer, but because of its placement, the audio from the subwoofer seems to be coming from the right side speaker. Due to the placement+
+of the subwoofer it is normal for the sound stage to seem shifted slightly towards the right speaker. If you prefer, you can adjust the balance control to shift the sound stage to the left or right side."+
So there's no need for a PRAM reset then I guess...

Intel 3945 roaming issues

I have some 1242 AP's set up with Cisco Fast roaming. My 3945 clients roam fine, but after a few seconds, they lose their IP address. If I have a constant ping going, my ping will drop for about 3 seconds, then replys will go for about 4 seconds. It will continue to do this about three times until stabilizing and then it works great until roaming again. Anyone have any ideas? TAC blames Intel. Intel says to work with Dell. Dell has no clue. Any help would be appreciated.

Hi Allan,
Have you tried tweaking Roaming Aggressiveness in the Intel PROSet client utility? You may also want to try turning off Auto-RF just to see if it makes any difference.
I had costumers which had problems with the ProSet Utility. We deinstlled ad used the Windows XP Wireless Zero configuration.
The Intel Wireless NIC have actual some issues with the Cisco environment.
Some examples from the forum:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd73e2f
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Security%20and%20Network%20Management&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.ee95e05
Please check if the wireless clients you use are specified in the "Cisco Compatible Client Devices" list:
http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_partners_0900aecd800a7907.html
The mentioned versions can be found here:
http://www.cisco.com/warp/public/765/ccx/versions_and_features.shtml
Best regards,
Frank

WLS 5.1 & Solaris 8 (Intel) Performance Pack Issue

OS: Solaris 8 Intel
WLS: Weblogic 5.1
Issue: Unable to load performance pack
Description: LD_LIBRARY_PATH is set for /apps/weblogic/lib/solaris -
Confirmed by output of startWebLogic.sh {see below}
Contents of /apps/weblogic/lib/solaris contains
libmuxer.so
# ./startWebLogic.sh
LD_LIBRARY_PATH=/apps/weblogic/lib/solaris
Tue Jul 10 21:04:42 EDT 2001: <WebLogicServer> Read global properties
/apps/weblogic/weblogic.properties
Tue Jul 10 21:04:51 EDT 2001: <ListenThread> Listening on port: 7001
Tue Jul 10 21:04:51 EDT 2001:<A> <Posix Performance Pack> Could not
initialize POSIX Performance Pack.
Tue Jul 10 21:04:51 EDT 2001:<E> <Posix Performance Pack> Stack:
java.lang.UnsatisfiedLinkError: no muxer in java.library.path
Tue Jul 10 21:04:51 EDT 2001:<E> <Performance Pack> Unable to load
performance pack, using Java I/O.
Tue Jul 10 21:04:51 EDT 2001: <SSLListenThread> Listening on port:
7002
Tue Jul 10 21:04:51 EDT 2001: <WebLogicServer> WebLogic Server
started
# ls -l /apps/weblogic/lib/solaris
total 3460
-rwxr-xr-x 1 weblogic weblogic 409436 Jul 4 12:05 libjsafe.so
-rwxr-xr-x 1 weblogic weblogic 22332 Jul 4 12:05 libmuxer.so
-rwxr-xr-x 1 weblogic weblogic 146932 Jul 4 12:05 libproxy.so
-rwxr-xr-x 1 weblogic weblogic 8632 Jul 4 12:05 libstackdump.so
-rwxr-xr-x 1 weblogic weblogic 6820 Jul 4 12:05
libstackdump_jdk12.so
-rwxr-xr-x 1 weblogic weblogic 7472 Jul 4 12:05
libweblogicunix1.so
-rwxr-xr-x 1 weblogic weblogic 6364 Jul 4 12:05 libwlenv.so
-rwxr-xr-x 1 weblogic weblogic 277712 Jul 4 12:05 mod_wl.so
-rwxr-xr-x 1 weblogic weblogic 275692 Jul 4 12:05 mod_wl_ssl.so
-rwxr-xr-x 1 weblogic weblogic 275780 Jul 4 12:05
mod_wl_ssl_raven.so
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci734_7
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_7
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_8
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci806_8
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci815_8
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci816_8
-rw-r--r-- 1 weblogic weblogic 47868 Jul 4 12:05 wlauth
-rw-r--r-- 1 weblogic weblogic 218276 Jul 4 12:05 zac_solaris
[startWebLogic.sh]
# Set user-defined variables
JAVA_HOME=/usr/java
PRE_CLASSPATH=

Michael Girdley wrote:
The perf pack is native code. It must be ported to each platform. Since
WLS only supports Solaris/SPARC, this port hasn't been done and that's why
the lib doesn't work.
Michael Girdley
http://learnweblogic.com
"Super-User" <[email protected]> wrote in message
news:[email protected]...
It's [email protected]
Super-User wrote:
OS: Solaris 8 Intel
WLS: Weblogic 5.1
Issue: Unable to load performance pack
Description: LD_LIBRARY_PATH is set for /apps/weblogic/lib/solaris -
Confirmed by output of startWebLogic.sh {see below}
Contents of /apps/weblogic/lib/solaris contains
libmuxer.so
# ./startWebLogic.sh
LD_LIBRARY_PATH=/apps/weblogic/lib/solaris
Tue Jul 10 21:04:42 EDT 2001: <WebLogicServer> Read global properties
/apps/weblogic/weblogic.properties
Tue Jul 10 21:04:51 EDT 2001: <ListenThread> Listening on port: 7001
Tue Jul 10 21:04:51 EDT 2001:<A> <Posix Performance Pack> Could not
initialize POSIX Performance Pack.
Tue Jul 10 21:04:51 EDT 2001:<E> <Posix Performance Pack> Stack:
java.lang.UnsatisfiedLinkError: no muxer in java.library.path
Tue Jul 10 21:04:51 EDT 2001:<E> <Performance Pack> Unable to load
performance pack, using Java I/O.
Tue Jul 10 21:04:51 EDT 2001: <SSLListenThread> Listening on port:
7002
Tue Jul 10 21:04:51 EDT 2001: <WebLogicServer> WebLogic Server
started
# ls -l /apps/weblogic/lib/solaris
total 3460
-rwxr-xr-x 1 weblogic weblogic 409436 Jul 4 12:05 libjsafe.so
-rwxr-xr-x 1 weblogic weblogic 22332 Jul 4 12:05 libmuxer.so
-rwxr-xr-x 1 weblogic weblogic 146932 Jul 4 12:05 libproxy.so
-rwxr-xr-x 1 weblogic weblogic 8632 Jul 4 12:05 libstackdump.so
-rwxr-xr-x 1 weblogic weblogic 6820 Jul 4 12:05
libstackdump_jdk12.so
-rwxr-xr-x 1 weblogic weblogic 7472 Jul 4 12:05
libweblogicunix1.so
-rwxr-xr-x 1 weblogic weblogic 6364 Jul 4 12:05 libwlenv.so
-rwxr-xr-x 1 weblogic weblogic 277712 Jul 4 12:05 mod_wl.so
-rwxr-xr-x 1 weblogic weblogic 275692 Jul 4 12:05 mod_wl_ssl.so
-rwxr-xr-x 1 weblogic weblogic 275780 Jul 4 12:05
mod_wl_ssl_raven.so
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci734_7
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_7
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci805_8
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci806_8
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci815_8
drwxr-xr-x 2 weblogic weblogic 512 Jul 4 12:05 oci816_8
-rw-r--r-- 1 weblogic weblogic 47868 Jul 4 12:05 wlauth
-rw-r--r-- 1 weblogic weblogic 218276 Jul 4 12:05 zac_solaris
[startWebLogic.sh]
# Set user-defined variables
JAVA_HOME=/usr/java
PRE_CLASSPATH=
Thanks, I set the NativeIO to false..... And hope that it gets ported.......

Intel Imac - Dock Issues / Program Start Problem

Ive has my intel based imac for about a year with no issues. I got 1 Virus type of thing a like 8 months ago but that was deleted without issue.
I have a problem where I would click a program in the dock and it would not open.
Anyone have any idea what might be wrong. It eventually started working btu i am concerned as to what the issue is.
thanks.

I have no idea what the actual problem was but I can offer an observation my experience with WIndows switchers. When you launch a Windows program a window is opened that covers the entire desktop, this isn't true of a Mac program. If you close the last open window of a Windows program it quits the program, this also isn't true of a Mac program.
These two facts often cause switchers into confusion. Say you were using Word on the Mac and closed your last document window. Being new to the Mac, you think you have quit the program but you haven't, it is still running. Later, you click on the Word icon on the dock to restart Word - but Word is already running. You don't get a new document window so you think Word didn't restart and something is broken. But what really happened is that Word was forced to become the active application when you clicked on its icon. But that's all clicking on the icon does.
Two of my top pieces of advice to new switchers: A Mac program is quit by selecting the Quit menu or keying Command Q. Closing the last window doesn't quit a Mac program. (With a few poorly programmed exceptions.) And pay attention to the top left corner of the menubar. It tells you what application is active.
This is what I think you experienced, but I could be wrong.

Intel iMac Noise Issues?

I am considering the new iMac Intel Core Duo. My brother has the original iMac G5 and has always complained about how loud it is with fan noise (and it is loud!). I was curious if the Intel iMac has removed this issue? I've seen them at the Apple Store here in San Francisco, but in the retail environment of that large space there is no way for me to know what it would sound like sitting in my home.
Thanks for the feedback ...

From all reports it would seem that Apple has corrected whatever caused all the noise in the first gen and ALS model G5 iMacs.

Snd-intel-hd speakers issue

Similar Messages

Maybe you are looking for