SNDS and Slftware Deployment Manager

Hi,
I just installed Sneak Preview SAP NetWeaver 2004 Slim Edition and tried to use the Netweaver Developer Studio (version 2.0.11). To get the Studio working I need to have SDM (Software Deployment Manager) should be installed as well.
Can somebody please send me the link to download the SDM for free or any other information.
TIA.
Ranjan

Hi,
SDN is a part and parcel od WAS,no need to install SDM saparately you can check the presence of SDM in C/D/E:usrsapWEPJC00SDMprogramsdm.exe.
Adittionally refer these documents
http://help.sap.com/saphelp_nw04/helpdata/en/22/a7663bb3808c1fe10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/icc j2ee application deployment j2ee-dep 6.40.pdf
Regards,
RK

Similar Messages

OIM 11G- Web Console- Problem with "Export Deployment Manager File"

Experts,
I am using gogle chrome browser on oim11g setup.
I was able to Import/Export the objects using Import/Export Deployment Manager File.
The reason why I opted for chrome is that I was unable to connect to login to the web console, it was just asking for userid and password and after some time, the browser(Internet Explorer 7) hangs on.
And with FireFox 5.0.1, it is the same thing both import and export deployment manager file windows opens as soon as I click and they just close after 2-3 seconds.
The problem now is after updating the java to "Version 6 Update 26 ", the Export Deployment Manager File stopped working. The window pop-ups and closes in 2 seconds.
But Import Deployment Manager File is working fine with out any problems.
The pop - up blocker is not enabled.
And I am sure that it was working fine earlier with chrome before the java update.When I remove the updated java version, chrome is asking to download the latest java version.
Any suggestions, that helps to work with chrome or firefox or IE?
Edited by: Venu on Aug 11, 2011 4:46 PM
Edited by: Venu on Aug 11, 2011 4:57 PM

Venu,
I have never had any luck getting anything after Version 6 update 23 to export properly. I would remove your updated Java and restore to a previous version of Java.
Sunny Tsang

Trying to deploy a Service using Orchestrator and Virtual Machine Manager

Hello,
I'm trying to create a runbook to deploy a Service in a cloud using Orchstrator and Virtual Machine Manager, 2012 R2 both of them.
I'm following these 2 links, but not luck.
http://daniyar-tech.blogspot.com.es/2013/07/system-center-2012-sp1-orchestrator.html
http://www.systemcentercentral.com/orchestrator-by-example-deploying-a-service-from-template-with-vmm-and-orchestrator-2/
I'm receiving this error in "Configure Service Deployment" step:
The following errors occurred when invoking PowerShell script:Could not find service template
I configured the Cloud Name and it does not work for me...
Thanks!

Thanks, Marc! This solution worked for me, after many other attempts failed.
Senior Tech Writer, SharePoint Performance and Capacity Management

Content Distributor, deployment Manager and resource services are dead

Hi,
I am using Fast ESP 5.3 product single node in a window environment. Recently during a SAM patch installation I have restarted ESP and post that I have found below three services status as N/A in System Overview. Even the server was restarted
due to window patching. As these services are down I am unable to create any collection neither am I able to publish any search profile.
Content Distributor
deployment Manager
and resource services
Strangely in nctrl status all services are displayed as Running.
These are the work around I have tried:
killed processes from Task manager
Restarted ESP
So is there any possible way to bring these services up.
With Regards,
Santanu Mishra

With reboot of the server the issue got resolved....
Santanu Mishra

Generated Code different from OWB Client and Deployment Manager....

Hi,
I developed the mappings using OWB9.2 and generated the code.
But when same mapping is used to generated code from deployment manager it is having extra code like WB_RT% procedures/functions.
Why this is happening, does any body have idea on this.
Please let me know.
With Regards,
Kranthi..

When you generate code from within your mapping, you'll get clean sql. But when you deploy your mapping and create package the code will contain more than just sql used for loading your tables, like control procedures etc. based on your mapping configuration, table loading options etc.
If you create mapping that will load table using TRUNCATE/INSERT option and generate code you will see only INERT INTO code, but when you deploy your mapping the code will include TRUNCATE TABLE code.

Urgent!!! Date works in DEBUG and not in Deployment Manager

Hi all
I am working on a Japanese project..I have the database with the character set (nls) set to japanese.
My mapping works in the Debug mode.. but after compiling and executing in the Deployment Manager throws the ORA-01847.
I dont understand the differences..
I have my locale set to Japanese and the MDL display also set to Japanese. I have set the regular settings in the Registry also.
Please help in this regard.
Thanks & Regards
Shariff

Hi Azraf,
I guess when debugging you don't use the entire dataset that is going to be loaded, yes?
What's your error about:
ORA-01847 day of month must be between 1 and last day of month.
Cause: The day of the month listed in a date is invalid for the specified month. The day of the month (DD) must be between 1 and the number of days in that month.
Action: Enter a valid day value for the specified month.
Seems it could be a simple thing (i.e. a wrong date), but I most say I don't have any experience with Japanese settings that might interfere with this logic.
Good luck, Patrick

Can not deploy Adobe CC with deployment Manager

Hi,
we are trying to deploy Adobe CC with SCCM 2012 R2. While the installation we are getting errors in the PDApp.log:
01/07/15 14:59:30:028 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 4196 | Build Version - 1.7.0.43
01/07/15 14:59:30:029 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 4196 | Logging Level verbosity Set to 4
01/07/15 14:59:30:029 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 4196 | Executing immediate custom action for install mode.
01/07/15 14:59:30:029 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 4196 | The CustomActionData string is : mode=install;sourceDir=C:\WINDOWS\ccmcache\1d\;installDir=;origDB=C:\WINDOWS\ccmcache\1d\ Adobe Creative Cloud Illustrator 2014.msi
01/07/15 14:59:30:029 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 4196 | Successfully executed the immediate custom action for install mode .
01/07/15 14:59:32:461 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Build Version - 1.7.0.43
01/07/15 14:59:32:461 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Logging Level verbosity Set to 4
01/07/15 14:59:32:461 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Executing the deferred custom action.
01/07/15 14:59:32:466 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Obtained the following as CustomActionData
01/07/15 14:59:32:466 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | mode=install;sourceDir=C:\WINDOWS\ccmcache\1d\;installDir=;origDB=C:\WINDOWS\ccmcache\1d\ Adobe Creative Cloud Illustrator 2014.msi
01/07/15 14:59:32:466 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | mode=install;sourceDir=C:\WINDOWS\ccmcache\1d\;installDir=;origDB=C:\WINDOWS\ccmcache\1d\ Adobe Creative Cloud Illustrator 2014.msi
01/07/15 14:59:32:466 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Original database path is : C:\WINDOWS\ccmcache\1d\Adobe Creative Cloud Illustrator 2014.msi
01/07/15 14:59:32:472 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | OptionXML saved at location :: C:\WINDOWS\TEMP\{C1921A81-A734-45BA-BE0B-E4440C3E2259}\\{CF57953C-5FB8-414D-AF1D-C555914C 4B73}
01/07/15 14:59:32:496 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Build Version - 1.7.0.43
01/07/15 14:59:32:496 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Logging Level verbosity Set to 4
01/07/15 14:59:32:496 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Initializing Custom Action Data from parameters
01/07/15 14:59:32:496 | [INFO] | | ASU | DeploymentManager | Utilities | | | 3796 | Folder does not exist
01/07/15 14:59:32:496 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Provisioning Tool path is (C:\WINDOWS\TEMP\{C1921A81-A734-45BA-BE0B-E4440C3E2259}\\{FF74F6C4-0D5C-43E0-98F2-5A9B0B3 FED97}).
01/07/15 14:59:32:498 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Starting to run the custom action for install mode
01/07/15 14:59:32:498 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | STEP 1: Starting to parse Option XML.
01/07/15 14:59:32:503 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Self-Update BootStrapper Relative Path doesn't exist.
01/07/15 14:59:32:504 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | No of updates found (1).
01/07/15 14:59:32:504 | [WARN] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Failed to find Royalty Bearing attribute info.
01/07/15 14:59:32:504 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Number of Medias found = 1
01/07/15 14:59:32:504 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Deployment Manager is running in Install Mode.
01/07/15 14:59:32:508 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Deployment XML created at path :: C:\WINDOWS\TEMP\{2C2F5292-0608-47D5-BCE2-3B2D1A59C1EC}\\{DE6BF6FD-0D94-4F7D-86B5-6804037C B0D7}
01/07/15 14:59:32:513 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Override XML created at path :: C:\WINDOWS\TEMP\{2C2F5292-0608-47D5-BCE2-3B2D1A59C1EC}\\{0B4F1D68-9714-494B-BF52-CCB490BD 2AF4}
01/07/15 14:59:32:517 | [WARN] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Failed to find the pdb database.
01/07/15 14:59:32:517 | [WARN] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Failed to get the local payload database handle.
01/07/15 14:59:32:517 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | STEP 2: Starting to launch ASU AAM.
01/07/15 14:59:32:517 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Bootstrapper launch location is :: C:\WINDOWS\ccmcache\1d\ASU\Set-up.dat
01/07/15 14:59:32:681 | [INFO] | | ASU | OPM | OPM | | | 4388 | Build Version - 8.0.1.12
01/07/15 14:59:32:681 | [INFO] | | ASU | OPM | OPM | | | 4388 | Logging Level verbosity Set to 4
01/07/15 14:59:32:711 | [WARN] | | ASU | OPM | OPM | | | 4388 | Failed in key1 generation
01/07/15 14:59:32:711 | [WARN] | | ASU | OPM | CryptEngine | | | 4388 | Failed in key1 generation
01/07/15 14:59:32:747 | [WARN] | | ASU | OPM | OPM | | | 4388 | Failed in key3List generation
01/07/15 14:59:32:747 | [ERROR] | | ASU | OPM | CryptEngine | | | 4388 | Failed in key3List generation
01/07/15 14:59:32:749 | [INFO] | | ASU | OPM | OPM | | | 4388 | Schema version and schema compatibility version are same or greater than current
01/07/15 14:59:32:773 | [INFO] | | ASU | OPM | OPM | | | 4388 | _opm_handle_OPDReturnedStatus called with opdStatus as:0
01/07/15 14:59:32:773 | [INFO] | | ASU | OPM | OPM | | | 4388 | No Record found for the input fields in opm_getValueForKey
01/07/15 14:59:32:774 | [INFO] | | ASU | OPM | OPM | | | 4388 | Released OPM refrence successfully in opm_freeLibRef
01/07/15 14:59:32:840 | [INFO] | | ASU | PIM | PIM | | | 4160 | Build Version - 2.8.1.451
01/07/15 14:59:32:840 | [INFO] | | ASU | PIM | PIM | | | 4160 | Logging Level verbosity Set to 4
01/07/15 14:59:32:849 | [INFO] | | ASU | PIM | PIM | | | 4160 | Build Version - 2.8.1.451
01/07/15 14:59:32:850 | [INFO] | | ASU | PIM | PIM | | | 4160 | Logging Level verbosity Set to 4
01/07/15 14:59:32:850 | [WARN] | | ASU | PIM | PIM | | | 4160 | Detected db journal file trying to repair it...
01/07/15 14:59:32:850 | [INFO] | | ASU | PIM | PIM | | | 4160 | trying to createOrUpdatePIMDbSchema.
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | Current db schema version on machine 2.
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | Current db schema version to install 2.
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | PIM DB Schema is up to date. Current schema version is 2.
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | PIM Database is Up To Date.
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | Sqlite 'Successfully' recovered from journal file.
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | PIMSqlite closeDB status 0
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | Build Version - 2.8.1.451
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | Logging Level verbosity Set to 4
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | Creating PIM instance for path: C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp
01/07/15 14:59:32:852 | [FATAL] | | ASU | PIM | PIM | | | 4160 | Detected db journal file, Application is in corrupted state: C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp
01/07/15 14:59:32:852 | [INFO] | | ASU | PIM | PIM | | | 4160 | sqlite(pim.db) at path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp is already closed
01/07/15 14:59:32:852 | [ERROR] | | ASU | PIM | PIM | | | 4160 | Failed to create the pimLibraryRef
01/07/15 14:59:32:852 | [ERROR] | | ASU | PIM | PIM | | | 4160 | Successfully freed PIM object Array
01/07/15 14:59:32:869 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Build Version - 1.7.0.43
01/07/15 14:59:32:869 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Logging Level verbosity Set to 4
01/07/15 14:59:32:869 | [FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | The Bootstrapper Process is (62).Stopping the installation process.
01/07/15 14:59:32:869 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Starting to clean the partially installed payloads.
01/07/15 14:59:32:874 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Undeployment XML created at path :: C:\WINDOWS\TEMP\{2C2F5292-0608-47D5-BCE2-3B2D1A59C1EC}\\{FEBD9916-0002-4AFE-9DE5-08A59CA0 479A}
01/07/15 14:59:32:874 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Starting to launch the Adobe Installer for uninstall mode.
01/07/15 14:59:32:874 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Obtained Adobe Common Folder Path.
01/07/15 14:59:32:874 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe
01/07/15 14:59:32:993 | [INFO] | | ASU | DeploymentManager | AAMEEUtilities | | | 3796 | Process creation completed.
01/07/15 14:59:32:994 | [FATAL] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
01/07/15 14:59:32:994 | [WARN] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Failed to find the pdb database.
01/07/15 14:59:32:994 | [WARN] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | Failed to get the local payload database handle.
01/07/15 14:59:32:994 | [INFO] | | ASU | DeploymentManager | Utilities | | | 3796 | Folder does not exist
01/07/15 14:59:33:001 | [INFO] | | ASU | OPM | OPM | | | 3796 | Build Version - 8.0.0.143
01/07/15 14:59:33:001 | [INFO] | | ASU | OPM | OPM | | | 3796 | Logging Level verbosity Set to 4
01/07/15 14:59:33:015 | [WARN] | | ASU | OPM | OPM | | | 3796 | Failed in key1 generation
01/07/15 14:59:33:015 | [WARN] | | ASU | OPM | CryptEngine | | | 3796 | Failed in key1 generation
01/07/15 14:59:33:046 | [WARN] | | ASU | OPM | OPM | | | 3796 | Failed in key3List generation
01/07/15 14:59:33:046 | [ERROR] | | ASU | OPM | CryptEngine | | | 3796 | Failed in key3List generation
01/07/15 14:59:33:048 | [INFO] | | ASU | OPM | OPM | | | 3796 | Schema version and schema compatibility version are same or greater than current
01/07/15 14:59:33:077 | [INFO] | | ASU | OPM | OPM | | | 3796 | _opm_handle_OPDReturnedStatus called with opdStatus as:0
01/07/15 14:59:33:078 | [INFO] | | ASU | OPM | OPM | | | 3796 | No Record found for the input fields in opm_getValueForKey
01/07/15 14:59:33:078 | [INFO] | | ASU | OPM | OPM | | | 3796 | Released OPM refrence successfully in opm_freeLibRef
01/07/15 14:59:33:100 | [INFO] | | ASU | DeploymentManager | | | | 3796 | Event Guid generated is: 'af2ccd85-1900-4b4e-b396-c2d165eb28df'
01/07/15 14:59:33:103 | [INFO] | | ASU | DeploymentManager | | | | 3796 | GetIEProxyInfo - No default proxy present on the user machine
01/07/15 14:59:33:104 | [INFO] | | ASU | DeploymentManager | | | | 3796 | GetIEProxyInfo - Failed to get proxy for the url, error:12006
01/07/15 14:59:33:104 | [INFO] | | ASU | DeploymentManager | | | | 3796 | GetIEProxyInfo - proxy Url is
01/07/15 14:59:33:561 | [INFO] | | ASU | DeploymentManager | | | | 3240 | HTTP Request Status code 200.
01/07/15 14:59:33:574 | [INFO] | | ASU | DeploymentManager | | | | 3796 | The http request returned HTTP_Status:0 HttpCommunicator error:0
01/07/15 14:59:33:574 | [INFO] | | ASU | DeploymentManager | | | | 3796 | Waiting for the async thread to get the task completed
01/07/15 14:59:33:581 | [INFO] | | ASU | DeploymentManager | | | | 4664 | Async thread is completed. Now exiting from function.
01/07/15 14:59:33:625 | [INFO] | | ASU | DeploymentManager | DeploymentManager | | | 3796 | The install workflow is terminating.
Can anybody please help us?
Thank you.
Stefan

Stefan,
Possibly dumb question but are your installers built for the appropriate architecture (32-, 64-bit)? Adobe is pretty picky about that with CC.

Issue while opening deployment manager

Hi Experts,
I am working on OIM 11gR2, When i try to open the Deployment manager (export) link from the sysadmin console, The entire application shuts down immediately. I do not see anyting on logs for this problem.
Is anybody facing this kind of issue.
Please help!!!

try below
1. In case 'Database Name' is changed and if you did not change the same in oim-config.xml
2.Try reinstalling the NexaWeb in that case and see if it helps
- Go to Weblogic Admin Console -> Deployments
- Stop/Delete the Nexaweb
- Deploy it back from location IAM_HOME\server\apps\Nexaweb.ear
If you don't find nexaweb under deployments deploy it manually using Weblogic console from above path

Supporting Multiple domains in IM&P with and Expressway deployment?

Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated.
My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and they are looking to enable Mobile Remote Access, B2B Video and XMPP Federation. One issue is that the Jabber domain that was selected 1 year ago for the pilot was a local domain. The reason for this is because the multidomain support was not available at the time. Internally there are 3 domains. example.ca, examplesales.ca, and examplebanannas.com. Their Jabber ID they use today is example.root.local. I am reading through the guides and it seems as though IM&P allows you to map a JABBER ID to an email address or a directory URI. This will allow multiple presence domains within one Presence cluster. The problem is that it appears as though federation will not work through expressway core / edge if you use this method. Can this be confirmed?
I am providing you these URL's only for guidance, to show you how I arrived at my situation where I’m asking for help on a configuration change to my customers IM&P settings.
note the section on page 41 of the following guide http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-5-1.pdf
One would presume that Multi-domain support is now supported with expressway core & edge. The caveat I found on page 4 of the following guide in relation to xmpp federation.
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and page 10 of the following guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and this section
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01010.html#CUP0_RF_CAF8AEDD_00
Expressway-E does not support XMPP address translation (of email addresses, for example). If you are using Expressway-E for XMPP federation, you must use native presence Jabber IDs from IM and Presence Service.
This being said
Based on my findings, I believe Cisco now supports multi-domain setup for IM&P with the "caveat" federation still doesn't work. My customer is not happy with this but still would like to proceed with the rest of the benefits that MRA brings to the table for their Jabber deployment.
To support the above scenario it is my understanding I need to make an adjustment to the configuration of IM&P. As I stated when I opened the case my customer’s current IM&P domain is “example.root.local” their JID is made up of [email protected]. It’s my understanding we cannot use this domain and activate MRA so we need to adjust everyone’s JID to be a Publicly routable DNS name. Since everyone that has a JABBER account also has an email account I was thinking we map the JID to the email. I’m trying to understand how to get from where we are to where we need to be. I found this guide but it doesn’t talk about the effects of doing this on a live system setup the way my customer is setup.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01100.html
I am also not certain this is the setting I’m looking for. I believe what I need to change is actually on the Presence server under the domains section I found this
Domains Configuration
Use the controls on this window to view and edit domains managed by the IM and Presence Service. Previously, the IM and Presence Service supported a single domain. With this release, you can specify multiple domains.
Before You Begin
To take advantage of multiple IM and Presence Service domains, you must choose Directory URI as the IM address scheme on the Advanced Presence Settings window. If the IM address scheme is set to UserID@domain, the default domain is used for the IM and Presence Service. The status of the IM Address Scheme setting is displayed at the top of the window in the Status box. The Status box contains a link to the Advanced Presence Settings window.
Is this what I need to do?

Hello everyone. This is long winded but the context is needed to explain what I'm looking for. Any help is appreciated.
My customer has piloted IM&P for 1 year now and is looking to take it to the next level. They purchased Expressway Core & Edge and they are looking to enable Mobile Remote Access, B2B Video and XMPP Federation. One issue is that the Jabber domain that was selected 1 year ago for the pilot was a local domain. The reason for this is because the multidomain support was not available at the time. Internally there are 3 domains. example.ca, examplesales.ca, and examplebanannas.com. Their Jabber ID they use today is example.root.local. I am reading through the guides and it seems as though IM&P allows you to map a JABBER ID to an email address or a directory URI. This will allow multiple presence domains within one Presence cluster. The problem is that it appears as though federation will not work through expressway core / edge if you use this method. Can this be confirmed?
I am providing you these URL's only for guidance, to show you how I arrived at my situation where I’m asking for help on a configuration change to my customers IM&P settings.
note the section on page 41 of the following guide http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-5-1.pdf
One would presume that Multi-domain support is now supported with expressway core & edge. The caveat I found on page 4 of the following guide in relation to xmpp federation.
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and page 10 of the following guide
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-5/XMPP-Federation-with-Cisco-VCS-and-IM-and-Presence-Service.pdf
and this section
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01010.html#CUP0_RF_CAF8AEDD_00
Expressway-E does not support XMPP address translation (of email addresses, for example). If you are using Expressway-E for XMPP federation, you must use native presence Jabber IDs from IM and Presence Service.
This being said
Based on my findings, I believe Cisco now supports multi-domain setup for IM&P with the "caveat" federation still doesn't work. My customer is not happy with this but still would like to proceed with the rest of the benefits that MRA brings to the table for their Jabber deployment.
To support the above scenario it is my understanding I need to make an adjustment to the configuration of IM&P. As I stated when I opened the case my customer’s current IM&P domain is “example.root.local” their JID is made up of [email protected]. It’s my understanding we cannot use this domain and activate MRA so we need to adjust everyone’s JID to be a Publicly routable DNS name. Since everyone that has a JABBER account also has an email account I was thinking we map the JID to the email. I’m trying to understand how to get from where we are to where we need to be. I found this guide but it doesn’t talk about the effects of doing this on a live system setup the way my customer is setup.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/10_5_1/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105/CUP0_BK_I07B7052_00_integration-guide-interdomain-federation-105_chapter_01100.html
I am also not certain this is the setting I’m looking for. I believe what I need to change is actually on the Presence server under the domains section I found this
Domains Configuration
Use the controls on this window to view and edit domains managed by the IM and Presence Service. Previously, the IM and Presence Service supported a single domain. With this release, you can specify multiple domains.
Before You Begin
To take advantage of multiple IM and Presence Service domains, you must choose Directory URI as the IM address scheme on the Advanced Presence Settings window. If the IM address scheme is set to UserID@domain, the default domain is used for the IM and Presence Service. The status of the IM Address Scheme setting is displayed at the top of the window in the Status box. The Status box contains a link to the Advanced Presence Settings window.
Is this what I need to do?

Error while Importing ResourceObject xml file in Deployment Manager

Hi Everyone,
I am getting this error while doing Import of HRPeopleSoftResourceObjects.xml ( A Resource Object xml file) in Deployment Manager. I am doing this step for Authoritative(Trusted Source) Reconciliation.
Error Says:- Attribute not present in EntityDefination of User :: ExpectedReturnDate.
ExpectedReturnDate is a UDF (Customize) field. I did Metadata and Sandbox import for this field to create this attribute in OIM. I can see this attribute on User Details screen as well as in User Table in OIM. So, ideally this error should not popup. I have to do this import for Reconciliation.
I pulled and checked all the xml files like(UserEO.xml.xml, userEO.xml.xml, userVO.xml, UserVO.xml.xml) from oracle.iam.console.identity.self-service.ear_V2.0_metadata1 and found ExpectedReturnDate field is available.
I am using: OIM Version - Oracle 11g Release 2
Database version - 11.2.0
Weblogic version - 10.3
Please let me know how to resolve this error.
Appreciate your response and support!
Warm Regards
Vijay Kumar

Appreciate your response Kevin!
I saw your response today. What you have suggested in your post make perfect sense to me.
Yesterday, I was able to create Reconciliation profile successfully. No idea how it worked so, didn't updated my post.
I tried to re-import the UDF, noticed ExpectedReturnDate attribute has little icon in fornt of it on deployment manager screen which says on mouse over "new field". No idea why as I didn't delete it from anywhere, perhaps it didn't get imported properly previously. I stepped ahead and clicked the import button on deployment manager but failed as it was throwing an exception which says udf_usr_expectedReturnDate is available in usr table. That makes sense to me as this column got created in usr table in OIM because of previous import and I didn't delete it either. This raised couple of doubts more as, along with this attribute there were other attributes in the same metadata xml file which were part of previous import and their respective columns were already created in usr table. Then why message poped-up for this field in particular? Anyway I went ahead with the import process.
Now I stopped all the server (Admin, SOA and OIM) and restarted them again and performed the same steps as mentioned above and this time it worked as expected. UDF file got imported successfully.
After this I went to Design Console verified all the fields and created the Reconciliation Profile. I checked OIM database and found RA_ProfileName recon tables got created.
As per your comment, Today I checked the RECON_USER_OLDSTATE table but this table is empty.
Still I have couple of doubts, if Reconciliation Profile got created it should create the xml file under metadata direcectory(in my case path should be: /apps/Oracle/Middleware/Oracle_IDM1/server/metadata/db). Please correct me if I am wrong? I hope it should be physical file not a logical file.
Once again thanks for your response!
Warm Regards
Vijay Kumar

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

How to install Software Deployment Manager

Hi!,
I have downloaded the PDK files and want to deploy it? How do I deploy them? As per help I need SDM ( Software Deployment manager to deploy this files, from where I will get software deployment manager and how to use SDM to deploy PDK files...please help...
Also I have more query...
In my netweaver studion, when I goto window-->preference, why I can't see software deploment manager link? this SDM is used to deploy WebDynpro application with Enterprise portal....
Please help me....
Thanks !

hi
software deployment manager installed automatically in central instancc while installing sap netweaver .
Thanks
Bharathi.Ch

Username getting disabled in Deployment Manager

Hi,
We are using OWB9.2 , when I am trying to deploy the mappings for different environments, I need to change the
source location and target location, but in Deployment manager it is not allowing me to change the source location,
but where as able to change the target location.
Can any body help me out why this is happening, and how to change the username to change/register to different
environments.
With Best Regards,
Kranthi.

Hi,
We are using OWB9.2 , when I am trying to deploy the mappings for different environments, I need to change the
source location and target location, but in Deployment manager it is not allowing me to change the source location,
but where as able to change the target location.
Can any body help me out why this is happening, and how to change the username to change/register to different
environments.
With Best Regards,
Kranthi.

Executing Process Flow from OWB Deployment Manager results in RPE-01008

Hi,
I'm using OWB 10.1.0.1.0 (10g) and just installed Oracle Workflow Server 2.6.3.
I can build, validate and generate Process Flows just fine. But every time I try to execute a Process Flow using OWB Deployment Manager, I'm getting a "RPE-01008: Recovery of this request is in progress". Execution of deployed Process Flows using Oracle Workflow Interface works just fine.
Anyone has an idea?
Thanks and regards
Andreas Kopp

Hi Dirk-Jan,
youÃre right, there are some ugly-looking NUllPOinterExceptions in that log file. However, I cannto interpret them:
2005/05/02-13:30:04-CEST [97A560] AuditId=80916: Processing execute request
2005/05/02-13:30:05-CEST [97A560] Free Memory(bytes)=49410200 Total Memory(bytes)=66715648 Used Memory(bytes)=17305448
2005/05/02-13:30:05-CEST [F1DD49] Initializing execution for auditId= 80916 parentAuditId= null topLevelAuditId=80916 taskName=TEST
2005/05/02-13:30:05-CEST [F1DD49] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2005/05/02-13:30:05-CEST [F1DD49] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.ProcessFlow'
2005/05/02-13:30:05-CEST [F1DD49] java.lang.NullPointerException
     at java.lang.String.<init>(String.java:166)
     at oracle.sql.CharacterSet.AL32UTF8ToString(CharacterSet.java:1378)
     at oracle.jdbc.driver.DBConversion.CharBytesToString(DBConversion.java:527)
     at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:621)
     at oracle.jdbc.driver.T2CCallableStatement.execute_for_describe(T2CCallableStatement.java:846)
     at oracle.jdbc.driver.T2CCallableStatement.execute_for_rows(T2CCallableStatement.java:1007)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1028)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2888)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:2960)
     at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4124)
     at sqlj.runtime.ExecutionContext$OracleContext.oracleExecuteUpdate(ExecutionContext.java:1556)
     at oracle.wh.runtime.platform.operator.owf_process.NativeOWFProcessOperator.defineProcessFlow(NativeOWFProcessOperator.java:1029)
     at oracle.wh.runtime.platform.operator.owf_process.NativeOWFProcessOperator.executeDefault(NativeOWFProcessOperator.java:476)
     at oracle.wh.runtime.platform.operator.owf_process.NativeOWFProcessOperator.execute(NativeOWFProcessOperator.java:227)
     at oracle.wh.runtime.platform.adapter.rtp.NativeExecutionAdapter.execute(NativeExecutionAdapter.java:43)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:63)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:534)
2005/05/02-13:30:05-CEST [F1DD49] Initializing execution for auditId= 80916 parentAuditId= null topLevelAuditId=80916 taskName=TEST
2005/05/02-13:30:05-CEST [F1DD49] oracle.wh.runtime.platform.service.controller.RecoveryInProgress: RPE-01008: Recovery of this request is in progress.
     at oracle.wh.runtime.platform.service.controller.AdapterContextImpl.initialize(AdapterContextImpl.java:1307)
     at oracle.wh.runtime.platform.service.controller.ExecutionContextImpl.initialize(ExecutionContextImpl.java:789)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.initialize(ExecutionController.java:32)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:50)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:76)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:534)
2005/05/02-13:30:05-CEST [F1DD49] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2005/05/02-13:30:05-CEST [F1DD49] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.ProcessFlow'
2005/05/02-13:30:05-CEST [F1DD49] Native execution operator initiating recovery by recoverable operator oracle.wh.runtime.platform.operator.owf_process.NativeOWFProcessOperator
2005/05/02-13:30:05-CEST [F1DD49] report_execution_result auditId=80916
2005/05/02-13:30:05-CEST [F1DD49] java.lang.NullPointerException
     at java.lang.String.<init>(String.java:166)
     at oracle.sql.CharacterSet.AL32UTF8ToString(CharacterSet.java:1378)
     at oracle.jdbc.driver.DBConversion.CharBytesToString(DBConversion.java:527)
     at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:621)
     at oracle.jdbc.driver.T2CCallableStatement.execute_for_describe(T2CCallableStatement.java:846)
     at oracle.jdbc.driver.T2CCallableStatement.execute_for_rows(T2CCallableStatement.java:1007)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1028)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2888)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:2960)
     at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4124)
     at sqlj.runtime.ExecutionContext$OracleContext.oracleExecuteUpdate(ExecutionContext.java:1556)
     at oracle.wh.runtime.platform.operator.owf_process.NativeOWFProcessOperator.defineProcessFlow(NativeOWFProcessOperator.java:1029)
     at oracle.wh.runtime.platform.operator.owf_process.NativeOWFProcessOperator.executeDefault(NativeOWFProcessOperator.java:476)
     at oracle.wh.runtime.platform.operator.owf_process.NativeOWFProcessOperator.execute(NativeOWFProcessOperator.java:227)
     at oracle.wh.runtime.platform.adapter.rtp.NativeExecutionAdapter.execute(NativeExecutionAdapter.java:38)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:63)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:76)
     at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
     at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
     at java.lang.Thread.run(Thread.java:534)
2005/05/02-13:30:06-CEST [97A560] Free Memory(bytes)=49283952 Total Memory(bytes)=66715648 Used Memory(bytes)=17431696
2005/05/02-13:30:06-CEST [97A560] AuditId=80916: Request completed
Any idea?
Thanks an regards
Andreas

Mapping runs through Deployment Manager but hangs in Process Flow

Hi,
I have a Mapping bound in a simple Process Flow.
The mapping deploys through Deployment Manager and runs. It currently processes no rows and takes a couple of seconds to do that. It completes with a Success message.
However, when I wrap it into a simple Process Flow...
--- w ---> END_WARNING
START ---> MY_MAPPING ---- s ---> END_SUCCESS
--- e ---> END_ERROR
.., deploy this and run it through the Deployment Manager, it hangs. I get the 'Execution in progress...' window with the moving graphic forever.
The Runtime Repository Browser Execution Report tells me that it is 'Busy', and if I drill down to the Process Flow Run Execution Report, I see an identical Start and End Time, an Elapsed Time of 0 seconds, and no other details (Execution Parameters, Activity Details or Error Messages).
Looking under 'Find Processes' on the Workflow Home Page, my workflow has no status in the Process List. Drilling down to the Diagram, I have a green line from the 'Start' element to my Mapping but the Mapping itself has no special colour.
I go back to the Deployment Manager and cancel the job - which it does and reports that it 'Completed with errors'.
The Runtime Repository Browser Execution Report now tells me that it is 'Busy' (with an information bubble), and if I drill down to the Process Flow Run Execution Report, I see different Start and End Times, and Elapsed Time of n seconds, a single Error Message 'RPE-01002: The operation was aborted at user request.', and no other details (Execution Parameters, Activity Details).
Looking under 'Find Processes' on the Workflow Home Page, my workflow has a status of 'Complete' in the Process LIst. Drilling down to the Diagram, I still have a green line from the 'Start' element to my Mapping and the Mapping itself still has no colour and no indication that it has stopped.
I'm running:
Oracle9i EE 9.2.0.5.0
Oracle10g OWB Client 10.2.0.1.0
Oracle10g OWB Repository 10.1.0.1.0
Anybody know how I can go about tracking down why this Process Flow is hanging - and, of course, getting it unhung :-)
Regards
Steve

Hello Steve,
It's a little difficult to read the exact flow from your ASCII graphics.
However, from your description it seems your workflow task only has an outgoing success connector, and your execution was not a success. This will stop the execution of that branch of your process flow, since there are no valid routes to take. If you only have a single branch in your workflow, the process flow is stuck.
To expedite your hung process you just click on the task icon in the Workflow Monitor graph window that does not have a green outgoing connector, press the Expedite button and select skip.
Corollary: If you use conditional connectors, always use all 3 from a task. I not using all 3, have a very good understanding of why you don't.
Regards, Hans Henrik

SNDS and Slftware Deployment Manager

Similar Messages

Maybe you are looking for