Sneak opreview installation problem(URGENT)

Hi Friends,
I am not able to install sneak preview version successully.
I ma trying to install Java full edition 2004s.
I was getting problem, then I uninstalled my norton antivirus firewall, but somewhere it failed to install.
Now,. I am trying to uninstall it.
I find following error:-
TypeError: this._name has no properties (in script NW_Uninstall|ind|ind|ind|ind, line 5111: ???)

Hi Ankit,
If u are not able to uninstall it automatically then u have to remove it manually.Just delete all the folder and files which generates during installations and remove MaxDb from add/remove program and then remove the Entries related to Sap from Registry. When every thing will be removed then try to install from scratch.
But i m not sure that it will install or not because u did install Abap edition first.have u removed it properly or not? i think the better way is to erase the OS and install it from scratch.
Hope it helps
Regards
Subhash

Similar Messages

  • WAS Sneak Preview Installation problem???

    Hi,
    I was successful in installing the WAS sneak preview installation from sdn.but since I had problems in using sdm password for deploying webdynpro I uninstalled the entire setup of sneak preview.
    Again when I tried to install sneal preview,it is stopping at 17th phase of 28 for a long time.The phase is "Load Java Database content".Neither it is giving any error in log file nor moving forward to next step for more than 2 -3 hours.
    Has anybody encountered this problem earlier?
    Useful answers will be suitably rewarded.
    Regards,
    RK

    Hi,
    it could very well be that your LOG volume is filled 100%. Please check your (<drive>:\sapdb\data\wrk\<SID>\)knldiag and/or knldiag.err file for LOGFULL messages.
    In order to free up log, you need to make a Log backup. Prior to your first Log backup, you need to have made a Data backup.
    So, if you haven't done any of the above previously, you would need to:
    1. define backupmedia for both Log and Data backups
    2. perform a data backup using the data backupmedium created in step 1
    3. perform a log backup using the log backupmedium created in step 1
    Afterwards, you could also create an Autolog backupmedium and switch on the Autologging feature, it would save the log automatically from filling to that degree.
    All done conveniently using the Database Manager GUI.
    Regards,
    Roland

  • Installation problem - urgent, PLEASE help!!

    I'm trying to install Java3D and somehow it doesn't seem to be working. I'm not sure whether I should be installing the opengl or the
    directx version, but I've tried both with no luck. I'm running Windows
    M.E.
    I downloaded the JSDK beta 1.4 version (I have previously tried also
    with the 1.3 version, this didn't work either), and now have the
    jdk1.3.1 as a folder on my C drive ( C:\jdk1.3.1) . Then I downloaded
    Java3D from the website, onto C, as an executable file. When I clicked
    it, it went through the installation process (not giving me any
    options for where to install it, i was just clicking on 'next') and
    seemed to complete ok, but I'm trying to test it by running the
    helloUniverse demo, and the file isn't even there. There's a Java3D
    folder which has been created in Windows, but this just contains a
    folder called uninstall_info.
    On my Java plug-in control Panel, it is currently set to 'use java
    plug-in default'. The other options are to use JRE or JDK, in folders
    Program Files\JavaSoft or JDK1.3.1 respectively. I don't know which
    one I should be choosing! I think I tried it with the JDK option
    before and that didn't work either.
    If anyone can please help I'd be really grateful, this is getting
    quite urgent!

    Hi there!
    Well, try installing java3d in the same directory as ur java(which is c:\jdk1.3.1 for u).
    If i am not mistaken, java3d, by default, installs in c:\jdk1.2.2 directory.
    U also have 2 set the path and classpath in the autoexec.bat to addr to \bin and \lib sub-directories resp.

  • Hyperion Shared Services Installation Problem (URGENT)

    Hi,
    I have installed the Hyperion Shared serives 9.3.1 with Oracle Application server and configured with the same but in
    services.msc i am able to see only HyperionS9OpenLDAp. i did the all post task and did manual configuration for
    Oracle Application Server like
    1 Created new OC4J instance for Shared services
    2 Added the below lines respective config/global-webapplication.xml file
    <init-param>
    <param-name>req_time_introspection</param-name>
    <param-value>true</param-value>
    </init-param>
    3 set the heap size
    Maximum heap size 512M
    Initial heap size 256M
    4 Added the Java Options below
    -Dhyperion.home=<HYPERION_HOME>
    -XX:PermSize=64m
    -XX:MaxPermSize=128m
    5 Deploying interop.war
    6 Added the below lines to Jave calss path
    <HYPERION_HOME>\deployments\generic\SharedServices9\config;
    <HYPERION_HOME>\deployments\generic\SharedServices9\config\lib
    \HubProductBean.jar;
    <HYPERION_HOME>\common\JDBC\DataDirect\3.6\lib\hyjdbc.jar;
    <HYPERION_HOME>\common\JakartaCommons\commons-collections-3.2.jar;
    <HYPERION_HOME>\common\JakartaCommons\commons-dbcp-1.2.1.jar;
    <HYPERION_HOME>\common\JakartaCommons\commons-logging-1.1.jar;
    <HYPERION_HOME>\common\JakartaCommons\commons-pool-1.3.jar;
    <HYPERION_HOME>\common\loggers\Log4j\1.2.14\lib\log4j-1.2.14.jar;
    <HYPERION_HOME>\common\XML\JAXP\1.2.2\xercesImpl.jar
    <HYPERION_HOME>\common\SAP\lib;
    But i able to get only one service.
    Please help on this
    Regads
    KumarK

    hi,
    I have the same supported Version of ORACLE APPLICATION SERVER 10g 10.1.3.1 and for the not able to see the Hyperion Shared Services service in Services.msc as while installing Shared Services there no Option like Deploy as Windows services so not able to see there i think.Please correct me if wrong.
    Here i have one doubt while Configuring Shared Services with Oracle Application Server we are not specified the port number for Shared Services. So is it takes the same PORT number and URL is
    http://<servername>:58080/interop/
    Please clarify me.
    Regards
    KUMARK

  • SAP EP 6.0 Installation Problems -- Please Help

    Hi,
    I am new to the SAP EP Technology (any SAP for that matter) - I figured out that downloading the EP Sneak Preview would be a good idea to learn it.
    So I downloaded the WAS (Java 6.4) and installed it without any problems. The JRE is working fine and registered.
    I then tried to install the EP 6 Sneak Preview itself and that's when I was made to stop by this error.
    "SAPInst could not find any SAP J2EE instances that match the Portal Platform requirements. Install the SAP J2EE 6.40 according to the Portal PAM requirements, and run the portal installation again."
    I have tried quite a few things but nothing seems to work.  Anyone who had this problem and gotten out of it...please pass on your knowledge.
    Thanks...

    Hi Balaji,
    I have not encountered this problem so perhaps you could provide some more details.
    After the installation of the WAS6.40 how are you sure that it is operational? In the MMC that is installed is the server showing up green in the console? What parameters are you providing the to the Portal installation?
    Are you using the Sneak preview installation guide as reference?
    Regards
    Daniel

  • Installation problem on Intel

    I have tried to install Solaris 8 on my Dell machine.
    I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
    The first screen says this....
    SunOS Secondary Boot version 3.00
    WARNING: ACPI Tables not in Reclaim Memory
    prom_panic: kmem_free block already free
    Entering boot debugger:
    [130ee5]:
    and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
    I don't know what the ACPI tables are .. and how i can fix this...
    Anyone who knows this... please help..
    Thanx a lot..

    I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

  • Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

    Help!
    I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
    HpSdpAppCoreApp
    "The feature you are trying to use in on a network resource that is unavailable.
    Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
    The last time I dug through some files on my own, bad things happened.
    Thanks,
    C

    good gracious, Chris ...
    okay, try applying the general advice on installation problems given here:
    http://docs.info.apple.com/article.html?artnum=93976
    ... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
    http://consumer.installshield.com/faq.asp#ts
    keep us posted.
    love, b

  • Installation problem on SUSE 12.1

    Hi
    I'm a Linux beginner and I am trying to install LV on SUSE 12.1
    I've also posted my problems on Lava:
    http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
    The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
     Any ideas?
    Is there a way to debug to see what's going on?
    Cheers,
    Mike
    Solved!
    Go to Solution.

    Hi Mike,
    Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest. 
    Best,
    Dan N
    Applications Engineer
    National Instruments 

  • Installation Problem on Win8

    Hello all
    I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
    Thank you guys for your support.
    Installation Logs:
    java_install.log - Pastebin.com
    java_install_reg.log - Pastebin.com
    JavaDeployReg.log - Pastebin.com

    Hi people!
    I have two problems with nokia suite...
    first of all I can't install it at my windows 8.1, I receive the message attached...
    Second,
    in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
    can somebody help me?
    Attachments:
    mokiasuit.png ‏13 KB

  • Installation problem on RHEL4 ..

    Installation problem on RHEL4 (Red Hat Enterprise 4) i have
    install start at unzip tar.gz and tar -xf .... now i have run
    ./installFMS it show
    ./fmsini: error while loading shared libraries: libstdc++.so.5:
    cannot open shar
    ed object file: No such file or directory
    ERROR: Your are running the Macromedia Flash Media Server
    installer
    on the wrong platform.
    it not support for fedora or anything else?
    plz help....

    would be nice if someone responded to this.... Macromedia
    wouldn't have been this lax in giving a reply :) AND they keep up
    with OS updates too :)

  • Xp_logininfo Installation problem

    Hello gurus,
    I'm facing the same problem as described in this link:
    Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
    the error I get is similiar:
    <i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
    but I just don't get how to solve it.
    -I've tried to use the profiler but didn't find any information that will help me to solve.
    -One of the guys wrote to add "logon rights" to the user ... what does it mean ?
    Please advice,
    Dimitry Haritonov

    Hi sven,
    Thank you very much for the quick and direct answer.
    The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
    I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
    Best regards,
    Dimitry Haritonov

  • Oracle database 11g release 2 installation problem on windows 7 (64-bit)

    First of all my windows is not genuine, but on my friend's desktop oracle download and installation  worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
    (Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
    it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w,  deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
    and
    then
    I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)"  from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
    The values I filled for
    1) Global Database Name :  orcl
    2) System Identifier : orcl
    3) I chose common password for both SYS and SYSTEM
    4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
    5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
    6) Then after few more nitty-gritty clicks, we are set to go !
    Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
    Username : sys/ as sysdba
    Password : (its the one you created in step 3 stated above )
    After this you are ready to write your first SQL command.

    Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
    Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
    About Database Administrator Security and Privileges

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • Installation problem for Java EE 5 SDK Update 2

    Hi ,
    I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
    http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
    Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
    Thanks in advance.

    For the difference between Java EE and Java SE read here:
    http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
    For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
    http://forum.java.sun.com/thread.jspa?threadID=738559
    Andrea

  • PPStream installation problem on Windows 7

    I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
    I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

    很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
    very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

Maybe you are looking for