Sneak Preview WDA - Error after I restart my laptop

Hi,
Happy X’mas to you all.
I successfully installed "NetWeaver 2004s Sneak Preview ABAP" in my notebook, after I install I was able to logon (NSP) and was able to see the example given in the document and was able to successfully test the example. But for some reason I restarted my notebook and when I try to logon again I am getting error “partner not reached (host XXX.X.X.X, service sapdp00) WSAECONNREFUSED: Connection refused”.  What could be the reason and how I can overcome this error? Did anyone face the same problem? Could someone help me in resolving this problem.
FYI: I was able to logon to other systems (on server through network) but the problem is with NSP.
Appreciate your help.
Thanks and Regards,

Hi,
Thanks a lot for the response. This would have had definitely solved my problem yesterday, but, because of my impatience or because of my eagerness to work on that Sneak Preview, I myself couldn’t wait for such a long time for the response from you or from anybody and played around with the installation and with that I started facing the problems and later realized that I should use MMC to start the engine. Now I logged my recent problem in the following Topic “Sneak Preview SAP NetWeaver 2004 - Error while installing it again”. If you can, could you help me in resolving this issue?
Your help will be highly appreciated.
Thanks and Regards,

Similar Messages

  • NW04s 07 java sneak preview installation error

    Hi,
    I am getting the following error when I am trying to install NW04s 07 java Sneak preview .
    <b>ERROR 2006-09-20 00:15:09
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EraserUtilRebootDrv' does not exist on the 'localhost' host.</b>
    I have the localhost entry in the hosts.ini file and turned off Norton anti virus.
    Appreciate quick response
    Srini Sandaka

    have a look may be it helps you
    Re: Netweaver 2004s ABAP Sneak Preview
    Regards
    Subhash

  • SAP sneak preview installation error reg MaxDB

    Hello,
    I am trying to install SAP sneak preview for Netweaver.
    I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
    I looked up the xcmdout log and the last few  lines are below.
    Please let me know of a way to proceed with installation.
    ubprocess starts at 20070222030959
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
    Execute Session Command : exit
    > Subprocess stops at 20070222031011
    OK
    > Subprocess starts at 20070222031011
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
    Execute Session Command : param_startsession
    Execute Session Command : param_checkall
    Execute Session Command : param_commitsession
    Execute Session Command : exit
    > Subprocess stops at 20070222031026
    OK
    OK
    OK
    > Subprocess starts at 20070222031027
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
    Execute Session Command : exit
    > Subprocess stops at 20070222031039
    OK
    > Subprocess starts at 20070222031039
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
    Execute Session Command : exit
    > Subprocess stops at 20070222031051
    OK
    > Subprocess starts at 20070222031051
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
    Execute Session Command : exit
    > Subprocess stops at 20070222031103
    OK
    > Subprocess starts at 20070222031104
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
    Execute Session Command : param_startsession
    Execute Session Command : param_checkall
    Execute Session Command : param_commitsession
    Execute Session Command : exit
    > Subprocess stops at 20070222031116
    OK
    OK
    OK
    > Subprocess starts at 20070222031119
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
    Execute Session Command : exit
    > Subprocess stops at 20070222031137
    OK
    > Subprocess starts at 20070222031137
    Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20070222031149
    > Subprocess call failed
    ERR
    -24961,ERR_STATE: The operational state of the database instance could not be determined
    -24994,ERR_RTE: Runtime environment error
    no_id_provided_by_rte,no_text_provided_by_rte

    Hi Shilpa,
    Try incresing your virtual memory settings
    Check out this link
    Max-DB cannot determine current db state (NW2004s install)
    Reward points if useful.
    Thanks
    Srinivas

  • Sneak preview Installation error, file source.properties not found

    Hi all,
          I am trying to install sneak preview (SAPNW2004sJavaSP9_Trial) with j2sdk-1_4_2_09 and  jce_policy-1_4_2.zip as specified. The  Installation was success upto a while but when I pass parameters to "secure store settings" it says there is no source.properties file in sneakpreview\java\ like that. If somebody have met with a similar problem and could overcome please help. Helping answer rewarded.
    Thanks & Regards,
    Sai Krishna. K

    Hi Konchada,
    Pls tell how you solved this problem...
    I am in need of it... Thanks
    Regards/ Guru

  • Communication channel reports error after system restart.

    Hello,
    We have third party adapter Aria installed in our PI 7.1 system and whenever systems is restarted interface is reporting errors
    in default trace and communication dies. but after we manually activate each time it works properly.
    Is anyone had similiar issue ?
    Our env. PI 7.1 Sp6 on AIX 5.3 with Oracle 10g
    1.5^H#DAD940003002003700000019000C1090472DA00666EED4D9#1245188236500#
    com.sap.engine.core.thread.execution.ExecutorImpl##com.sap.eng
    ine.core.thread.execution.ExecutorImpl####n.a.##416c9f105abd11deb4e9dad940003002#
    System [43]##0#0#Warning##Plain###Too big value[100
    0] specified for maxConcurrency argument on Executor [Thread
    forcom.sap.ip.bi.sdk.dac.connector.sapq.rarresource adapter] creation.
    Allowed max concurrency rate for every Executor is not more than 30% of
    the total thread pool capacity [60]. Thread Management will
    lower the max concurrency rate of this executor to [18]. Config tool
    can be used to increase the value of ApplicationThreadManager p
    roperty [ExecutorPoolMaxSize] to reach higher quota for Executor
    concurrency. Switch the severity of this location to DEBUG to see t
    he stack trace of the executor creation.#
    #1.5^H#DAD940003002003500000017000C1090472DA00666EED4D9#1245188480930#System.err##
    System.err#J2EE_GUEST#101##n.a.##6a74c5905abd11de9
    dacdad940003002#Application [45]##0#0#Error##Plain###Jun 16, 2009
    4:41:20 PM org.apache.commons.httpclient.HttpMethodDirector execut
    eWithRetry
    INFO: I/O exception (java.io.IOException) caught when processing
    request: Invalid keystore format
    #1.5^H#DAD940003002003500000018000C1090472DA00666EED4D9#1245188480933#System.err##
    System.err#J2EE_GUEST#101##n.a.##6a74c5905abd11de9
    dacdad940003002#Application [45]##0#0#Error##Plain###Jun 16, 2009
    4:41:20 PM org.apache.commons.httpclient.HttpMethodDirector execut
    eWithRetry
    INFO: Retrying request
    #1.5^H#DAD940003002003500000019000C1090472DA00666EED4D9#1245188480938#System.err##
    System.err#J2EE_GUEST#101##n.a.##6a74c5905abd11de9
    dacdad940003002#Application [45]##0#0#Error##Plain###Jun 16, 2009
    4:41:20 PM org.apache.commons.httpclient.HttpMethodDirector execut
    eWithRetry
    INFO: Retrying request
    #1.5^H#DAD94000300200350000001B000C1090472DA00666EED4D9#1245188480943#System.err##System.err#
    J2EE_GUEST#101##n.a.##6a74c5905abd11de9
    dacdad940003002#Application [45]##0#0#Error##Plain###Jun 16, 2009
    4:41:20 PM org.apache.commons.httpclient.HttpMethodDirector execut
    eWithRetry
    INFO: I/O exception (java.io.IOException) caught when processing
    request: Invalid keystore format
    #1.5^H#DAD94000300200350000001C000C1090472DA00666EED4D9#1245188480944#System.err##System.err#
    J2EE_GUEST#101##n.a.##6a74c5905abd11de9
    dacdad940003002#Application [45]##0#0#Error##Plain###Jun 16, 2009
    4:41:20 PM org.apache.commons.httpclient.HttpMethodDirector execut
    eWithRetry
    INFO: Retrying request
    #1.5^H#DAD94000300200350000001D000C1090472DA00666EED4D9#1245188480948#
    com.ariba.asc.connector.exception.util.ExceptionMgr##com.ariba
    .asc.connector.exception.util.ExceptionMgr.handleError(Exception e,
    ChannelProfile cp)#J2EE_GUEST#101##n.a.##6a74c5905abd11de9dacdad
    940003002#Application [45]##0#0#Error##Plain###
    [CC_AdvanceShipNotice_cXML_Sender_2] [Error Level] 2[Error Code] ECC103[Error Desc]
    Ariba SN Not Available[Error Message] Cannot connect to Ariba
    SNcom.ariba.asc.connector.exception.AribaSNException: Cannot connect t
    o Ariba SN
    at com.ariba.asc.connector.cxml.util.CXMLSender.sendRequest
    (CXMLSender.java:207)
    at com.ariba.asc.connector.cxml.util.CXMLSender.sendCXMLRequest
    (CXMLSender.java:122)
    at
    com.ariba.asc.connector.controller.action.ProfileUpdateAction.sendProfileRequest(ProfileUpdateAction.java:167)
    at
    com.ariba.asc.connector.controller.action.ProfileUpdateAction.updateProfile(ProfileUpdateAction.java:142)
    at
    com.ariba.asc.connector.controller.action.ProfileUpdateAction.updateChannelProfile(ProfileUpdateAction.java:110)
    at
    com.ariba.asc.connector.controller.action.ProfileUpdateAction.perform
    (ProfileUpdateAction.java:72)
    at com.ariba.asc.connector.controller.ScheduleTaskMgr.run
    (ScheduleTaskMgr.java:88)
    at com.sap.engine.core.thread.impl3.ActionObject.run
    (ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:152)
    at com.sap.engine.core.thread.impl3.SingleThread.run
    (SingleThread.java:247)
    Caused by: java.io.IOException: Invalid keystore format
    at sun.security.provider.JavaKeyStore.engineLoad
    (JavaKeyStore.java:632)
    at java.security.KeyStore.load(KeyStore.java:1150)
    at
    com.ariba.asc.connector.cxml.util.AuthSSLProtocolSocketFactory.createKeyStore(AuthSSLProtocolSocketFactory.java:218)
    at
    com.ariba.asc.connector.cxml.util.AuthSSLProtocolSocketFactory.createSSLContext(AuthSSLProtocolSocketFactory.java:275)
    at
    com.ariba.asc.connector.cxml.util.AuthSSLProtocolSocketFactory.getSSLContext(AuthSSLProtocolSocketFactory.java:300)
    at
    com.ariba.asc.connector.cxml.util.AuthSSLProtocolSocketFactory.createSocket(AuthSSLProtocolSocketFactory.java:315)
    at
    com.ariba.asc.connector.cxml.util.AuthSSLProtocolSocketFactory.createSocket(AuthSSLProtocolSocketFactory.java:384)
    at org.apache.commons.httpclient.HttpConnection.open
    (HttpConnection.java:704)
    at
    org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry
    (HttpMethodDirector.java:384)
    at
    org.apache.commons.httpclient.HttpMethodDirector.executeMethod
    (HttpMethodDirector.java:170)
    at org.apache.commons.httpclient.HttpClient.executeMethod
    (HttpClient.java:396)
    at org.apache.commons.httpclient.HttpClient.executeMethod
    (HttpClient.java:324)
    at com.ariba.asc.connector.cxml.util.CXMLSender.sendRequest
    (CXMLSender.java:169)
    ... 10 more

    Hi
    In visual Admin check for that particular Adapter Service there would be a parameter which has to be set as boolean (true) , am not sure , actually it is present in rest of adapter , kindly check
    lemme know if any parameters present
    rgds
    srini

  • How avoid "AUD: OS Errors" after server restart

    Hi,
    After restart my windows 2003 i'm receiving the next messages in my Oracle 11g R2 Standard Edition Be one alert.log file:
    AUD: OS Error = 31 encountered while writing audit record
    AUD: OS Error = 5 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    Someone could tell me how I can avoid these messages?
    Many thanks in advance.

    Hi schavali,
    The OS version is Microsoft Windows 2003 Standard Edition.
    Initially audit_trail value was 'DB' and i was receiving the next messages in my Oracle 11g R2 Standard Edition Be one alert.log file:
    AUD: OS Error = 31 encountered while writing audit record
    AUD: OS Error = 5 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    Following the oradba suggestions i changed audit_trail value from 'DB' to 'OS', but i continued receiving similar messages in the alert.log:
    AUD: OS Error = 31 encountered while writing audit record
    AUD: OS Error = 31 encountered while writing audit record
    AUD: OS Error = 5 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    AUD: OS Error = 1717 encountered while writing audit record
    What do you thinking about? How i can avoid this error messages?
    Many thanks in advance.

  • Adobe PDF preview handler error after install Reader XI

    I have received a notification that an update to Reader XI is available.  After the installation M/S outlook could not preview all PDF files with the error:
    This file cannot be previewed because of an error with the following previewer:
    Adobe PDF Preview Handler
    To open this file in its own program, double-click it.
    My system = Windows XP / Outlook 2007
    What should I do?

    I know this thread is pretty old, but JIC - Try disabling internet auto-detect:
    Open Adobe Reader
    Go to Edit menu>Preferences
    Click Internet, then Internet Settings
    Click LAN Settings
    Uncheck the box “Automatically detect settings”
    Click OK buttons and close Adobe

  • Outlook 2007 Print Preview/Print error after KB2509470

    Are others running into print preview or print error message after installing MS KB2509470?  Our environment XP Pro 32bit, running Office 2007 Std SP2 with latest patches from MS.  Ricoh and HP Printers.  If we uninstall this KB, problem is
    resolve.
    Error Message:
    There is a problem with the selected printer.  You might need to reinstall this printer.  Try again, or use a different printer.

    Patch is severely broken, can not be backed out. Set for removal on the WSUS server and now users are receiving an error box "The following updates were not installed: Update for Micorsoft Office Outlook 2007 (KB2509470). Tried to remove using MSIEXEC /x
    KB2509470 with no luck. Throws error 1603 in event logs.
    When the patch is re-issued, will we be able to install on top of a broken uninstall.
    Microsoft - we could really use your help in mitigating this issue ASAP.
    We too could not uninstall KB2509470 on some computers.  Ended up turning on the Installer logging
    http://support.microsoft.com/default.aspx?scid=223300 and found error:  DEBUG: Error 2259:  Database:  Table(s) Update failed
    We then found http://support.microsoft.com/kb/970320 which sent us to
    http://support.microsoft.com/kb/981669
    After installing the http://support.microsoft.com/kb/981669 package and rebooting, we were then able to uninstall KB2509470.

  • "TNS-12535: TNS:operation timed out" error after listener restart

    I have two related questions:
    Scenario 1:
    1. I have two remote Windows machines with database on each. One is Win 2003 Server (machine A) and another one is Win XP (machine B)
    2. I can ping from A to B.
    3. I can ping from B to A.
    4. I can tnsping from A to B.
    5. I CAN'T tnsping from B to A.
    6. Windows Firewall on both machines are off.
    What could be possible reason for point# 5?
    Scenario 2:
    Now, the second part:
    1. I had an unwanted entry in tnsnames.ora on B which I removed.
    2. Then I restarted the listener on B. Actually, I wanted to restart the one on A to check if that resolves issue mentioned in point# 5 above.
    3. I tried tnsping from A to B but suprisingly it is also giving "operation timed out" error now. So now tnsping not working from either sides.
    I didn't make any changes in listener.ora on B, just stopped it and started again. Only change made was removing unwanted entry in tnsnames.ora on B.
    Why does that affected database connectivity from A to B which was working fine previously?
    If any extra information needed please let me know, and thanks in advance for your answers.
    - Ramesh

    DB names on both machines: ORCL
    listener.ora on B (Win XP) - This was working before listener restart, I mean, I was able to connect to DB on B from A.
    # listener.ora Network Configuration File: C:\app\Test\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\app\Test\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Test\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = c:\app\Test\product\11.2.0\dbhome_1)
    (SID_NAME = ORCL)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = testpc)(PORT = 1521))
    ADR_BASE_LISTENER = C:\app\Test
    listener.ora on A (Win 2003 Server) - Never able to connect to DB on this machine from A.
    # listener.ora Network Configuration File: D:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = D:\app\Administrator\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:D:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = D:\app\Administrator\product\11.2.0\dbhome_1)
    (SID_NAME = ORCL)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = NRDBSVR.delldomain1.netreachasia.com)(PORT = 1521))
    ADR_BASE_LISTENER = D:\app\Administrator
    NOTE:
    Machine A = NRDBSVR.delldomain1.netreachasia.com (Win 2003 Server)
    Machine B = testpc (Win XP)

  • After a sucessfull install, why am I receiving the "This document could not be printed", and "There are no pages selected to print" errors after a restart?

    I have ran into this issue a few times and I don't think the reinstall is the problem.  I have some End Users who are telling me they can't print from the IE.  Our environment uses IE8 to print forms.  I will install the application ( Adobe Reader XI ) and it will work fine for that day.  Once they restart, the errors appear and they can no longer print.  Has anyone had any experience with this?

    Two things to try: open Adobe Reader | Edit | Preferences
    Documents: change 'View documents in PDF/A mode' to Never
    Security (Enhanced): uncheck 'Enable Protected Mode at Startup'

  • FR Studio started throwing error after environment restart

    Hi All,
    We have distributed Hyperion EPM installation (Version 11.1.2.0) in windows and repository resides in MS sql server.
    It is quite stable environment and everything was working fine till sometime back .
    However, recently these windows servers got patched (some OS level patching) and post that we restarted our services , FR studio started throwing error while connecting:
    "You are not authorized to use this functionality "
    We checked the services and verified if there is any issue on port or firewall level but there was none.
    Also while logging to workspace users get this message 'The startup document specified doesn't exist in the repository'.
    Just wondering what could cause this issue and how to troubleshoot this as nothing has changed in environment aprat from windows patching.
    Please suggest.
    Thanks

    We could get the issue fixed by adding some additional entries in host files of foundation server and FR server.
    In the server where we have FR server installed , we found log file  'registry' at E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\  and got the hint that server was trying to communicate with wrong host name (not sure why) which actually don't exist in our environment.
    Once we mapped that incorrect host names in host files to the correct host name and ip in host files of servers, issue got resolved.
    Now we would be finding why servers started to refer other server with wrong host name and to fix that we had to explicitly add entries to host files which was not the case earlier.
    Thanks again.

  • NW 04 Sneak Preview instaling error

    Hi I am trying install NW 04 Sneakpreview which has downloaded from SDN.
    I am struck at 22 of 33 (Load Java Content) installation step giving an error.
    <b>Error Log:</b>
    <i>java version "1.4.2_08"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
    Jul 1, 2005 11:58:51 AM com.sap.inst.jload.Jload main
    INFO: Jload -sec J2E,jdbc/pool/J2E,C:\usr\sap\J2E\SYS\global/security/data/SecStore.properties,C:\usr\sap\J2E\SYS\global/security/data/SecStore.key -dataDir D:/NW04/NW04SneakPrevJavaSP11/NW04SneakPrevJavaSP11/NWSneakPreviewSP11/SAP_NetWeaver_04_SR_1_Installation_Master_DVD__ID__51030843\IM01_NT_I386\..\..\SneakPreviewContent\JDMP -job C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.log
    Jul 1, 2005 11:58:52 AM com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://srinivass/J2E [Restart required].</i>
    My OS is W2K having 1GB RAM and 80GB HD.
    Can anybody please help to resolve this issue.
    Thanks in Advance
    Srinivas Sandaka

    Hi,
    Thanks for you valuble sugestion.
    It is problem with the database, I started the database.
    Now I am getting another error:
    <b>Error Log:</b>
    <i>java version "1.4.2_08"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
    Jul 1, 2005 8:18:03 PM com.sap.inst.jload.Jload main
    INFO: Jload -sec J2E,jdbc/pool/J2E,C:\usr\sap\J2E\SYS\global/security/data/SecStore.properties,C:\usr\sap\J2E\SYS\global/security/data/SecStore.key -dataDir D:/NW04/NW04SneakPrevJavaSP11/NW04SneakPrevJavaSP11/NWSneakPreviewSP11/SAP_NetWeaver_04_SR_1_Installation_Master_DVD__ID__51030843\IM01_NT_I386\..\..\SneakPreviewContent\JDMP -job C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_COPY\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.log
    Jul 1, 2005 8:18:05 PM com.sap.inst.jload.db.DBConnection connectViaSecureStore
    INFO: connected to J2E on jdbc/pool/J2E
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.JobStatus readStatus
    INFO: commencing restart
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to delete from table BC_EDM_EVENT
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload dbImport
    INFO: BC_EDM_EVENT deleted
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload dbImport
    SEVERE: DB Error during import of BC_EDM_EVENT
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload printSQLException
    SEVERE: Message: Invalid object 11/24/04 4:30 AM of type java.sql.Date assigned to host variable 5.
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload printSQLException
    SEVERE: SQLState: SAP06
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload printSQLException
    SEVERE: ErrorCode: 1001109
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload dbImport
    INFO: trying to delete from table BC_EDM_PROJECT
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload dbImport
    INFO: BC_EDM_PROJECT deleted
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload dbImport
    SEVERE: DB Error during import of BC_EDM_PROJECT
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload printSQLException
    SEVERE: Message: Invalid object 5/17/05 3:30 AM of type java.sql.Date assigned to host variable 5.
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload printSQLException
    SEVERE: SQLState: SAP06
    Jul 1, 2005 8:18:07 PM com.sap.inst.jload.Jload printSQLException
    SEVERE: ErrorCode: 1001109
    Jul 1, 2005 8:18:08 PM com.sap.inst.jload.db.DBConnection disconnect
    INFO: disconnected</i>
    Can you please suggest
    Thanks in advance
    Srinivas Sandaka

  • Preview - crop error after saving, and field lock-out

    Filling out PDF's of my taxes, I get two consistent errors:
    1. When I try to save my work, it crops the page, leaving white space to the left and below, and cutting off the page to the right and above
    2. I loose the pre-set fields, and can no longer fill in the form.
    Is there any way to avoid this in preview, or do I just need to use another program (Illustrator, or Acrobat...and if Acrobat, is reader adequate, or do I need the full program?)

    Welcome to Discussions!
    You should use Adobe Acrobat Reader. For this type of .pdf, Reader is sufficient.
    I tried out a 1040EZ and got the same result as you in Preview.
    PDF forms aren't as portable as they pretend to be. Sometimes they don't play nice with Preview.

  • Installing SAP Netweaver sneak preview license error

    Hello all,
    I have appiled and recieved a license from SAP.   When I tried to install it using saplicense command, I got the following error.   Please help,  I am not sure how to set  the dbms_type and DIR_LIBRARY environment variables.   I am using MYSQL and installed the NW portal under Windows XP professional SP2.  
    C:\usr\sap\J2E\SYS\exe\uc\NTI386>saplicense -install ifile=c:\j2e dbms_type=maxd
    b DIR_LIBRARY=\usr\sap\J2E\SYS\exe\uc\NTI386
    SAPLICENSE (Release 700) ERROR ***
        ERROR:   Can not set DbSl trace function
        DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
        RC-INFO: error loading dynamic db-library - check environment for:
                 dbms_type = <db-type>  (e.g. ora)
                 DIR_LIBRARY = <path to db-dll>  (e.g. /usr/sap/SID/SYS/exe/run)
    thanks

    Hello Ruchit,
    I switched to use j2eadm acct to run saplicense -install ifile=licensefile.  It seems the environment variables are set correctly by default but it complains about database connection this time.   Here are the error message:
    C:\usr\sap\J2E\SYS\exe\uc\NTI386>saplicense -install ifile=c:\j2e
    SAPLICENSE (Release 700) ERROR ***
        ERROR:   Connect to database failed
        DETAILS: DbSlConnect failed with return code 99
    SQL-ERROR -4008 (check DB manual for explanation)
    Best regards

  • NW -Sneak Preview ABAP Error

    Hi
    I hav installed the ABAP Version in my machine. when i try to login to SAP and starting the NSP database i was not able to login to sap. i am encountering the following error
    An invalid request was made to the database interface
    when accessing  table "DOKTL"
    Last error logged in SAP kernel                                                                               
    Component............ "NI (network interface)"                                   
    Place................ "SAP-Server Ganesan_NSP_00 on host Ganesan (wp 0)"         
    Version.............. 38
    Error code........... "-16"
    Error text........... "verify own hostname 'Ganesan' failed"                     
    Description.......... "NiIMyAddrVerify"                                          
    System  call....... ""
    Module............... "nixxi.cpp"                                                
    Line................. 7458                                                                               
    The error reported by the operating system is:                                   
    Error number..... " "                                                            
    Error text....... " "                                                            
    Pls suggest me
    Ganesh

    did you install loop back adapter and configured the IP address
    and set the IP address 10.10.0.10 pointing to your host Ganesan in windows/system32/drivers/etc/hosts file?
    Regards
    Raja

Maybe you are looking for

  • How to delete empty coulums in Excel using Macro

    Dear Users, i have prepared a very big excel file. actually this file is record of old prices and i vlook the the part number from different files and extract the old prices. some time there is no record so all the columns is empty. let me explain li

  • I can't open .WMF files in Photoshop 10, why?

    Why can't I open .WMF files in Photoshop 10?

  • Airport express - audio dropping

    i'm using airport express for wireless internet and to play audio through a pair of powered speakers. it has worked fine in the past but lately has been dropping the audio constantly. i'm playing music through itunes and the track just stops, and the

  • Catching message errors after submit

    Is there any way to catch message after submitting report? I mean any type of message, i.e. E,S,I and so on. And if it's possible, I need to suppress them. Maybe this can work with help of the system calls?

  • Image Processor keeps crashing CS2

    This started this summer. If I try to use the image processor either from bridge or from the automate menu, PS immediately closes. I've uninstalled and reinstalled more than a few times. I've also deleted preferences, but can't solve this problem. Wo