Snip: Cut time and move by locators problem
If I select "yes" for "Do you also want to move tempo changes and global score symbols?", then the Snip happens, but one of my earlier regions before the snip is now out of time.
I have a (different) frozen track, so tried unfreezing that first but it didn't help.
If I select "No" for "Do you also want to move tempo changes and global score symbols?", then all regions are still in time, but now my later automation is out by X number of bars.
It's a movie I'm working on, and the bars in question are the end titles for which I have no footage yet, so it's tagged on after the movie has finished (I realise this won't export to movie...), but I've just tried another snip earlier during the movie and the same thing happens, always with the same track.
The region on the track in question is not smpte-locked either...
Quad 6.5Gb Mac OS X (10.4.6) PB 1.25Ghz 1.5Gb Ram, Motu 828Mk2
Irvind, I think I have seen this problem as well. For me it turned out to be that the last tempo change before the cut region got deleted - even though this may have been sometime before. It's not immediately obvious what has gone wrong because it all goes slightly out of time!
I found I had to insert a duplicate tempo setting about a bar
before the cut and this got deleted leaving the previous one intact.
I think this is termed an unwanted program feature
Hope this solves it for you.
Similar Messages
-
Insert or Cut Time and move automation data - how to do it?
Hi when I cut or insert time it moves the regions but not the automation data. I have tried switching nn 'move automation with regions' but it doesn't move the automation that goes past the end f regions eg plug in settings like delay feedbacks etc.
a) this seems to me to be really crazy - why if you had done a lot of detailed automation programming at the end of a song would you not want it to move if you cut 4 bars from earlier on in the song?
any ideas appreciated very much!!
best
tommy bafter using logic for years I have discovered a new bit and something very weird.
New Bit:
As well as Cut/Insert Time in the Region Menu
there is a Cut/Insert Time in the Edit menu.
if I start here:
http://www.applebananacarrot.com/downloads/pre.jpg
if I do the region Cut ( from the region menu on the arrange window):
look what happens to the automation data on track 21
http://www.applebananacarrot.com/downloads/postregioncut.jpg (track 21 data didn't move)
and compare it to this one doing everything else the same but using the Cut from the main logic edit menu.
http://www.applebananacarrot.com/downloads/posteditcut.jpg Track 21 automation data did move.
That to me seems wrong....
whaddya think?
best
tommy banana -
Dears all
i need to cut by locators and insert measure moving the tempo and division.
In the 7 version i remember just one click (???)
Please illuminate me .......
Thanks in advance.use the insert section shortcut which is at the top of tha arrange page. it will slice the audio/midi and insert a chunk of nothing where ther locators are set, just like the old function in L7 " insert time and move by locators"
-
I made a ringtone and it did go into my tones and it won't upload to my phone. I have done this several times and never had any problems til now. Can anyone help me on this?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
My iPhone 4S lost simcard reference several times a day and issue message invalid SimCard. I have already replaced simcard three times and not solve the problem. It's necessary to power off and power on to solve it. Could someone help me?
Return your phone to Apple for evaluation
-
Macbook Pro is slow, freezing all the time and has Wi-Fi problems
Hello!
My Macbook Pro started acting kinda strange a couple of weeks ago. It's slow, freezing all the time and constantly connecting and reconnecting to the Wi-Fi network after around half a minute of usage.
Here is the story, as far as I know:
In the start of 2014, pup-up boxes started popping up on my Macbook Pro. They said that I had to enter a password for the Keychain to gain access to a service or something. The odd thing about it was that I had never set up my iCloud Keychain. It just started appearing without me knowing why. Unfortunately, I didn't know the password for this due to the fact that I never set it up. I tried every password combination that could possibly work, but I didn't get through it. I tried different solutions, but nothing worked out. I solved it by simply making a new user account on my Mac. I used this for like 1 month before the whole Mac with all its user started messing itself up.
It might be worth to notice that this secondary-user didn't require a password to log in, so when I closed my Macbook and re-opened it, it would continue where it was left off. This might have been the reason for the Mac sometimes to get really warm while being in my backpack, which might also have caused the problem. I am not sure though.
After using the secondary user for a while, the Mac started acting strange again. This time it was something different. One day, my girlfriend started up my Macbook Pro and noticed that it was extremely slow. I assumed it was just in the need of a restart, but that wasn't it. The computer started freezing all the time at first. It froze when I clicked something in an application, and I had to wait like 10 seconds for it to go back to normal. If I was typing anything on Facebook, it would freeze, but I could still use any other tab of the browser without any problems. However, they would freeze to if I did anything special on other websites. Every other program would also freeze for reasons like typing or clicking on anything.
After a short while, it started being really slow during startup and use. A few days ago, my Macbook Pro also started disconnecting from Wi-Fi networks while trying to load pages. It doesn't disconnect every time, but it does sometimes. It tries to reconnect after that, and if it succeed's, everything is back to normal for a while.
Additionaly, the battery have been draining faster, and when it reached 0%, the computer turned off and closed all the open programs. Normally it has entered Sleep Mode, but not anymore.
Do any of you have any clue what the issue might be?
I have done the following:
- Reset PRAM
- Restore to system defaults
- Installed AVG Antivirus and scanned it
- Repaired and verified disk in Disk Utility.
- Uninstalled Adobe Flash Player.
I hope anyone can help me! I really need my computer for educational use!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/U.+\/Shared\//b'$'\n''s/(\/Users\/)[^/]+/\1USER/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
i have macbook pro and can not watch movie
I'm afraid that what you are trying to open is the format that Quick Time doesn't support. You can install some plugin apps as mentioned above. Or just install some other 3rd party free media player to replace QT, such as Macgo free Mac media player, VLC.
Notice:
VLC does not support playback of commercial Blu-ray discs with copy protection. Those require decryption keys, which only a commercial player can provide. -
Final Cut Studio and OS 10.5 problems
Since upgrading to Leopard on my G5, DVD Studio Pro, Soundtrack Pro and Motion have not been working properly. DVD Studio Pro opens but none of the program-specific pulldown menus appear at the top of the screen. DVD Studio Pro, File, Edit Project, Arrange, etc. pulldowns are simply missing. In addition, all other pulldown menus in the program (e.g., First Play, Background, Overlay File, etc. appear but do not function. Soundtrack Pro and Motion also have the missing menu bar items, but I haven't had time to see if other functions are also affected. Final Cut Pro appears to be working normally.
Fortunately (and a bit mysteriously), I have the same programs on my Macbook Pro and they seem to have been unaffected by the transition to 10.5. I had upgraded that system first and everything seemed to go pretty smoothly, so I decided to upgrade the G5 as well.
I've trashed preferences files to no effect and was hoping to find a solution short of reinstalling all of Final Cut Studio or, worse, the OS. Any suggestions or reports of a similar nature would be appreciated. Thanks.ill just add what I am experiencing to see if anyone can help. I have no problem with drop down menus or DVD studio pro. I am using the FCP 4.5 however.
Here is my deal.
I've got issus with Leopard - perhaps with everyone else on here. Specifically. I am trying to make m2v of my FCP project. I first attempted to send it to compressor with the response from compressor being "no background processing able" This happened once before a long time ago and I have NO idea how to correct that. I installed complete new software on another drive and the same thing happened. Is FCP 4.5 not compatible with OSX10.5?
Also I tried going through quicktime conversion but I could not select mpeg2 compression. WHAT HAPPENED TO THAT when I installed 10.5 - any idea how to restore that?
If that wasn't bad enough. I went to titanuium toast 7.1.2 and tried burning a FCP DV file just to test. I get the message Mac OS error- cant burn!!!
HELP!!!!! How can I get compressor to work, or quicktime mpeg2 compression plugin back to confiugre through FCP, or just burn in toast?
Thanks!!!!! -
When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.
I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.
-
I'm having a big problem with all of this. Don't you have a phone number?
Use http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
[topic moved to Flash Player forum] -
What could I do can any one plz help
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Use Java Timer to move a panel smoothly, need help!
I am using JBuilder to build an Windows Application.
I put everything on the contentPane. There is one Panel I call it "jPanelDemo" and another panel "jPanelText".
Now I want to start a timer, and move jPanelDemo panel from the right side of jPanelText to the same location of jPanelText, when the timer stops, jPanelDemo should place the jPanelText position.
Here is my code:
// declare the timer
Timer timer1 = new Timer(1000,null);
int timerSpeed = 1;
// here is the ActionListener
timer1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
while (jPanelDemo.getLocation().x > jPanelText.getLocation().x)
jPanelDemo.setLocation(jPanelDemo.getLocation().x - timerSpeed, jPanelDemo.getLocation().y);
contentPane.repaint();
jPanelDemo.repaint();
timer1.stop();
// here to ensure jPanelDemo replaced jPanelText
jPanelDemo.setLocation(jPanelText.getLocation().x, jPanelDemo.getLocation().y);
);The timer is triggered by clicking a certain Jbutton.
I did the similar codeing in .NET programming and it worked fine. However, I translate the code to Java. When I run this code, the timer actually works, and jPanelDemo does move and replace the jPanelText.
The problem I am facing now is: when I start the timer, the movement of jPanelDemo cannot be seen, until the timer stopped, the jPanelDemo poped up at the same location of jPanelText.
I tried to use contentPane.repaint(), it doesn't work for me.
Please help me solve this problem.I do not quite understand what you mean.
I added the ActionListener when I initialize the
controls while the frame is loaded.Yes I missed that but you still have a loop in the event thread which is a NO NO. Maybe this will illustrate AN approach -
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Fred702 extends JPanel
public Fred702()
super(null);
setPreferredSize(new Dimension(640, 480));
final JLabel label = new JLabel("Hello");
add(label);
final int deltaT = 50;
new javax.swing.Timer(deltaT, new ActionListener()
double theta = 0.0;
double deltaTheta = 0.2 * Math.PI * deltaT / 1000.0;
int r = 200;
public void actionPerformed(ActionEvent e)
int x = (int)(Math.sin(theta) * r + 0.5 + r);
int y = (int)(Math.cos(theta) * r + 0.5 + r);
label.setBounds(x, y, label.getPreferredSize().width, label.getPreferredSize().height);
theta += deltaTheta;
}).start();
public static void main(String[] args)
JFrame frame = new JFrame("Fred702");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setContentPane(new Fred702());
frame.pack();
frame.setVisible(true);
} -
Whwn viewing home movies the movie cuts out back to the general menu at random, forcing me to enter menu again, reselect the movie and hit resume button.
this happens everytime I try to play a movie, maybe after 1 min of play then again after 3 mins, next time it might play for 6 mins then cut out and so on. The macbook pro is not reverting to sleep mode or closing down and the wifi signal is strong. So is the apple tv an expensive load of junk or what?Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 8800 GS - VRAM: 512 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
Hitachi HDS721010KLA330 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
12 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[running] com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
ChronoSyncBackgrounder Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
Dropbox Application (/Applications/Dropbox.app)
Canon IJ Network Scanner Selector2 Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
WebEx: Version: 1.0 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS2 [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
VIA PrefPane [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
3% Mail
2% com.apple.iCloudHelper
1% Creative Cloud
1% Google Chrome
Top Processes by Memory: ℹ️
223 MB Google Chrome
150 MB Finder
129 MB Google Chrome Helper
112 MB Mail
69 MB Google Drive
Virtual Memory Information: ℹ️
35 MB Free RAM
1.45 GB Active RAM
1.45 GB Inactive RAM
888 MB Wired RAM
27.01 GB Page-ins
851 MB Page-outsWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?
Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP
Maybe you are looking for
-
Processo de Subcontratação - Contingência
Pessoal, Estou com o seguinte problema, ao efetuar um processo de subcontratação mov. 541 com saída de NFe, eu a comutei para contingência para teste. Verifiquei que após estornar o documento via MBST e gerar uma nova NFe utilizando o mesmo pedido, e
-
After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix
-
Sequence creation for Super Type and Sub Type (Parent-Child)
Data Model is structured with Super Type-Sub Type Concept.When data is being inserted in the Super Type table, I will be using a sequence Supertype.NEXTVAL as Primary Key.Now the same sequence will be the Primary Key for Sub Type table also. Can I us
-
Loop in a report select rows ???
Hello, I have an updatable report with a column row selector (the column is in the first position and it is shown). I want be able to loop over the select rows in a report in order to do some pl/sql, this pl/sql has to be executed only when the user
-
After downloading and installing Firefox 8, I am unable to use it.
I am using a dialup connection and Windows XP. A dialog box appears when I try to use Firefox that says I must restart the computer to complete a previous upgrade of Firefox. I have rebooted at least 6 times, but nothing has changed.