SNMP for 6608 active calls

I have been trying to find a way to poll my 6500 for the total number of active calls via SNMP. I am looking to get this data into a graph made by MRTG.
From the CLI, I get the data via 'sh port voice active call'
Anyone have an idea?

There are no separate MIB modules defined for the 6608 card. However, if you want to see the number of completed calls from Call Manager, you can use the performance monitor counters. To view the number of completed calls, start up performance counters, added a new counter, select "Cisco MGCP PRI Device" under Performance object. One of the counters is "CallsCompleted". This should show you what you're looking for. For more information, visit
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00800c4cd1.html#36551 .

Similar Messages

MIB for Total Active Calls?

Hello list.
I have a Cisco2610 gateway with a E1 card making calls to a PSTN local cloud. Is there a SNMP MIB to gather the "Total Active Calls" or the "Total Call Legs" ?
Hope someone can help me
Thanks in advance
Best Regards,
Ricardo.-

Try:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/ft_csto2.htm#xtocid18
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080110d2a.html#1025023

Chat window with active caller always closed by de...

Since updating to the latest version of Skype v6.18 for Mac, the chat window for active callers is always automatically closed. For example, if I call someone and then want to send them a link via chat, I need to click the "+" icon, then choose "instant message" to open the chat box again. For each new call, the chat box is automatically closed again. I manage a remote team of developers and as you can imagine we use Skype for calls and chat all the time. We're always sending chat messages while on a call and it's super annoying to have to re-open the chat box for every active call every time. I can't understand the point of this except to say that it must be a bug and so I'd like to flag it with you to fix.
Attachments:
Screen Shot 2014-07-09 at 12.09.41 pm.png ‏462 KB

I agree. This is definitely an annoyance for me and my team. Like the original poster I manage a remote team of developers and post messages in nearly every call. Having the message window hidden on every new call causes an extra few keystrokes on almost every call. Of course this isn't a show-stopping issue for me since there is an easy workaround but it does decrease Skype's usability for my use case.

SHUTDOWN: waiting for active calls to complete.

Hello,
environment is HPUX 11.23, Oracle Version is 9.2.0.5
We had an ORA-600 error yesterday. We reported that error to the support and were suggested to install patch 9.2.0.8.
However i have one question. As you can see from the output in the alert-logfile it took a very long time to shutdown the instance using the immediate option:
Sun Nov 9 17:33:58 2008
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 454
Sun Nov 9 17:39:07 2008
Active call for process 3991 user 'oracle' program 'oracle@xyz (TNS V1-V3)'
SHUTDOWN: waiting for active calls to complete.
Sun Nov 9 17:50:36 2008
ALTER DATABASE CLOSE NORMAL
Is there anything one can do in such a situation to speed up the shutdown of the instance ?

Rajabaskar Thangaraj,
Oracle database has a job facility and a streams/advanced queuing facility.
These facilities are possible by setting up a few ancillary processes.
Those parameters govern the number of processes.
Setting them to 0 will disable the facility completely.
As you alter the parameter in memory, as you as you have bounced the database, it will be back to the value in the spfile and the facilities will work again.
Disabling them is especially useful when you the facilities are frequently used, ie you have a job running every 30 seconds.
In the past, on several databases, this was the only way to allow a shutdown immediate.
Hope this helps,
Sybrand Bakker
Senior Oracle DBA

Disabling Active call window...cupc 8.6

Question from one of my users...is there a way to disable the active calls window when the user is on the phone?
I just got an earful about how annoying this is...
Thanks in advance for any advice...
~Ray

Not without disabling deskphone/softphone control and turning CUPC into an IM&P-only client. If you wanted to go that route you would want to disable the CTI, CCMCIP, and Audio profiles within the CUP Admin > CUPC/Jabber > User settings.
Please remember to rate helpful responses and identify helpful or correct answers.

BDC for SPRO Activity

Hi Experts,
Basically I am Functional Consultant but I have client requirement where I need to Call BDC thru Z-Transaction.
Here my requirement is to Define Shipping Data for Stock Transfers Between Storage Locations by uploading Excel File
SPRO Path is..
Materials Management > Purchasing > Purchase Order > Set up Stock Transport Order > Set Up Stock Transfer Between Storage Locations > Define Shipping Data for Stock Transfers Between Storage Locations..
Now here I need to insert the data..
But here I dont have specific T-Code for this activity..
I tried to Record BDC but when I run it, it dose not work for node selection for the SPRO path and it stops at IMG screen..
Any suggestions for that???
If nothing works, I have last option for this is to insert data in Database Table directly (Table - T001L)
Thanks & Regards,
HP

Hi,
your SPRO activity is just maintaining of content of table V_T001W_L and table V_T001L_L. So you can go to transaction SM30, enter table name V_T001W_L or V_T001L_L and insert data. You can easily write BDC for transaction SM30. Unfortunately I can not see possibility how to enter new line but maybe it should not be possible.
Cheers

Isdn Layer 1 deactivated when there is no active call

Hi All,
I am in Nairobi Kenya. Here we use ISDN Basic-net3 and my problem is that most of the telco switches here deactivate Layer 1 when there is no active call.
When I try to initiate a call by using the ISDN test call command I get an error to the effect that B channel is not available.
The only way I can initiate a call is I first call the line then and then disconnect. Then I have about 5 seconds to make a test call and pings are successful. How do I make the router initiate a call when layer 1 is deactivated.
the debug isdn q921 out has nothing till a call comes in.
I also understatnd that European ISDN switches deactivate Layer 1 when there no active call. I dont have a problem with one of the switches, coz it does not bring down the line when there is no active call.
Thakx in advance
Martin

Thanks for the quick response.
It is a cisco 1760
The IOS is c1700-sv3y-mz.122-15.T5.bin
When I try to make a test call the show isdn status initially indicates that the router is trying to activate layer 1 then after 5 seconds it indicates that it is deactivated.
I have not yet configured DDR as indicated in the config file
Building configuration...
Current configuration : 3054 bytes
! Last configuration change at 00:38:54 UTC Mon Aug 9 1993
! NVRAM config last updated at 00:36:54 UTC Mon Aug 9 1993
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Gill-House
logging queue-limit 100
enable secret xxx
ip subnet-zero
no ip domain lookup
isdn switch-type basic-net3
no voice hpi capture buffer
no voice hpi capture destination
class-map match-all voice-traffic
match ip rtp 16384 16383
policy-map voice
class voice-traffic
priority 24
class class-default
fair-queue
gw-accounting syslog
interface Loopback0
description Loopback interface for VoIP Dial-peers
ip address 128.1.x.x.255.255.255
interface Multilink1
bandwidth 6
ip address 128.1.x.x.255.255.252
ip tcp header-compression iphc-format
ppp multilink
ppp multilink fragment-delay 20
ppp multilink interleave
multilink-group 1
ip rtp header-compression iphc-format
interface FastEthernet0/0
description Gill-House LAN
ip address 128.1.x.x.255.255.0
speed auto
interface Serial0/0
description Link to Head Office
bandwidth 64
no ip address
encapsulation ppp
no fair-queue
ppp multilink
multilink-group 1
interface BRI1/0
ip address 10.10.1.2 255.255.255.0
encapsulation ppp
isdn switch-type basic-net3
isdn point-to-point-setup
keepalive 20
router eigrp 100
passive-interface FastEthernet0/0
passive-interface Loopback0
network 128.1.0.0
no auto-summary
no eigrp log-neighbor-changes
ip classless
no ip http server
logging source-interface Loopback0
logging 128.1.1.179
call rsvp-sync
voice-port 2/0
cptone GB
ring frequency 50
voice-port 2/1
cptone GB
ring frequency 50
dial-peer cor custom
dial-peer voice 2 pots
destination-pattern 101
port 2/0
dial-peer voice 51 voip
destination-pattern 100
session target ipv4:128.1.0.254
ip qos dscp cs5 signaling
dial-peer voice 55 voip
destination-pattern 120
session target ipv4:128.1.31.254
ip qos dscp cs5 signaling
dial-peer voice 52 voip
destination-pattern 102
session target ipv4:128.1.91.254
ip qos dscp cs5 signaling
dial-peer voice 53 voip
destination-pattern 103
session target ipv4:128.1.121.254
ip qos dscp cs5 signaling
dial-peer voice 54 voip
destination-pattern 110
session target ipv4:128.1.21.254
ip qos dscp cs5 signaling
dial-peer voice 56 voip
destination-pattern 130
session target ipv4:128.1.41.254
ip qos dscp cs5 signaling
dial-peer voice 57 voip
destination-pattern 140
session target ipv4:128.1.111.254
ip qos dscp cs5 signaling
dial-peer voice 58 voip
destination-pattern 150
session target ipv4:128.1.61.254
ip qos dscp cs5 signaling
dial-peer voice 59 voip
destination-pattern 160
session target ipv4:128.1.71.254
ip qos dscp cs5 signaling
line con 0
logging synchronous
line aux 0
line vty 0 4
password housing
login
ntp clock-period 17208074
ntp server 128.1.1.211
ntp server 128.1.0.254
end
Gill-House#

Why do we have to spend $39 for a phone call if Adobe has made an error with your account ?

Have new computer with win8, cannot transfer with seral numbers, in my account there is no history of purchases of elements9 and premier elements 9. I refuse to spend money for a phone call for the error on my statement that leaves out the purchase order number not allowing me to download with a missing link.

Perhaps you will be kind enough to state your problem here so that volunteers can help you out. We can't help you with lost serial numbers or activations on multiple machines; otherwise most problems can be addressed and if there is no solution we'll say so.
G/L

Workaround for IE active content problem?

Adobe
posted
a workaround for existing web pages to respond to the change in
IE that requires users to manually activate Flash content. I tried
doing the same document.write in an external file for the HTML
files FlashHelp generates wherever I found the <object> and
<embed> tags, but I get a script error ("Object expected") in
the lines where I call the function. (The solution worked for me in
simple HTML pages with Captivate movies, so I know it can work.)
The only reason I can think of that it won't work is that the
scripts are concatenating strings, not just showing a movie where
the <object> and <embed> tags are. Has anyone found a
workaround for FlashHelp so users don't have to manually activate
the top and left panes? I put in a "wish" for Adobe to provide a
solution on the site and later in an update or new version of
RoboHelp (which is another issue in and of itself), but who knows
when the developers will be able to come up with it. Thanks!

Thanks for asking, Mimi. Here are more specific steps:
1. Open Notepad or another program for creating text files.
2. Create two functions. For example:
function insertMaster1() {
function insertMaster2() {
You can call your functions anything you want, but the names
must be different. Note that for the moment, they're empty, but
we'll change that in a minute.
3. Save the Notepad file with a JS file extension (for
example, runactive.js). In Notepad, specify “All Files”
for “Save as type” so that it doesn’t save as a
TXT.
4. When you generate your FlashHelp system, it creates a
bunch of HTM files containing JavaScript in the destination folder
you specified when generating your output. Locate wf_master.htm and
wf_navpane.htm in the output folder. (If you leave RoboHelp to use
its defaults, it puts your help system in an !SSL!/FlashHelp
directory within your project folder.)
5. Open wf_master.htm.
6. In the <head> tags, insert a line that references
your JS file:
<script language=“JavaScript”
src=“runactive.js”></script>
7. Find the lines in the code that look like this:
// Insert the “Master” SWF
8. Highlight everything AFTER this commented-out block until
the </script> tag. The last thing you highlight should be
"document.write(strObject);".
9. Cut the highlighted code and paste it into the first
function in your JS file so it looks like this:
function insertMaster1() {
// Build up the variable string we will be sending
strFlashVars = "uniqueHelpID=" + parent.UniqueID();
……(more code)
document.write(strObject);
10. In the place where you just cut all that code out of
wf_master.htm, insert a call to the function:
insertMaster1();
That’s all you need because all that code you just
moved was already in <script> tags in the HTM file. The
</script> tag should come immediately after this function
call.
11. Open wf_navpane.htm.
12. Repeat steps 6 – 10 for wf_navpane.htm. The code
we’re concerned with in this file looks almost exactly like
that in wf_master.htm, but there are a few lines less this time.
Put the code you take out of wf_navpane.htm into the second
function in your JS file. Where you cut out the code from
wf_navpane.htm, put a call to the second function (it should come
right before the end of the <script> tags):
insertMaster2();
13. Save your JS file and the two HTM files.
14. Whenever you re-generate your output, RoboHelp is going
to erase your new versions of these HTM files and create its own
again. Copy your new versions of wf_master.htm and wf_navpane.htm
to another location (can be a folder within your output folder).
Now you have them so you can paste them back over RoboHelp’s
versions each time you finish generating your output. For example,
I would stow my wf_master.htm and wf_navpane.htm in a folder called
"drop files." Then, after I get done generating my output, I copy
those files and paste them in the output folder, letting them save
over the ones that RoboHelp created.
15. To test it once you've finished the swap, find the HTM
file in your output folder that is named after your project. For
example, if my project is called flying_monkey, I would find
flying_monkey.htm. Open this HTM file in Internet Explorer, and you
shouldn’t have any messages telling you that you have to
press Enter or Spacebar or click on the panes to activate them.
This runs from the same basic idea as Adobe’s
workarounds for Flash—we’re going to a file external to
the HTM files for the active content tags. Hope you find this
useful! Let me know if you run into any problems.
--Ben

BAPI for Network Activity

Hi,
Can any pne tell me the BAPI for Network Activity.
I have to pass the below listed fields.
PROFID
AUART
DISPO
WERKS
AUFNR
KTEXT
GLTRP
GLTRP
PRONR
PROJN
PRCTR
VORNR
LTXA1
STEUS
PROJN
ARBID
ARBEI
ARBEH
LARNT
DAUNO
SAKTO
PRKST
WAERS
EKORG
EKGRP
MATKL
LOSME
KTEXT1
SRVPOS
MENGE
MEINS
KSTAR
LTXT
APLZL_VOR
APLZL_NCH
AOBAR
I also need to pass few Z fields.
Asset Class
Investment Type
Payment profile
Asset Category
Part Number
Part Description
Contract Number
1st Investment Check
First off tool part qty
Final investment check
Mass production
Tool Register
Shared
Shared Part number
Trouble Code
Can anyone please tell me the BAPI which suits my requirement.
Thanks,
Vignesh
Moderator message: please stop posting duplicates, whether same user ID or not, do some research of your own.
Is there any BAPI for T-Code : CN21 with custom fields ?
Edited by: Thomas Zloch on Mar 5, 2012

Dear deepthi dandibh,
Do you know how to solve it? I got the problem similar as you.
When I debug via BAPI_PO_CREATE1 function, I found the KNT has the G/L Account inside, But when I call BAPI_PO_CREATE1 by Zxxx program and debuging it. It doesn't has the G/L Account inside KNT table.
Could you please help to advise me how to do ?
Best Regard,
NNP

PRI channel busy issue , even when there are no active calls

Hi All ,
i using VWIC-2MFT - E1 CARD with VG. one PRI is working fine but on another PRI we are facing busy channel problem , even when there is no active calls , actually channels are not being free after disconnecting call. when we restart the gateway its startworking for some time ...
i already replaced that card .
please advice

I believe that this post should be made to the Unified Communications and Video forum.
Would please you repost to that group.
Thanks

Status row for item '', activity ID '264766' does not exist.

I have developed a custom workflow which is AME configured. The workflow runs well in R12.1.2 instance. But when deployed to R12.1.3 it fails out.
error starting at line 20 in command:
exec XX_PACKAGE.XX_PROCEDURE(19098, 'XX_WF', '1:Yes;')
Error report:
ORA-01086: savepoint 'WF_SAVEPOINT' never established in this session or is invalid
ORA-20002: 3101: Status row for item '', activity ID '264766' does not exist.
ORA-06512: at "APPS.WF_ENGINE", line 4192
ORA-06512: at "APPS.XXIFMIS_ICX_UTILS", line 20
ORA-06512: at line 1
01086. 00000 - "savepoint '%s' never established"
*Cause: Trying to roll back to a save point that was never established.
*Action:
Could anyone suggest how I can debug this issue.

Sosa,
When i run the wfstat nothing wrong in the info. unable to find the issue.
But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
When i comment these two dml ( update to header status & insert into events ) there is no error.
Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
Regards/Prasanth

Monitoring the number of active calls in a gateway from HUM

Hi,
we are configuring HUM and we want to display the number of active calls in a gateway but we can't find any OID's that show exactly what we want. So we are going to use the EXPRESSION-MIB in order to calculate some values we need.
In MRTG we launch a snmpwalk query against the OID 1.3.6.1.4.1.9.9.63.1.3.1.1.9 (cvCallActiveInSignalLevel) and we count with a counter the number of rows obtained from that snmpwalk. The calculation is as follows:
@ret=snmpwalk(sigint03.'@'.'x.x.x.x'.'1.3.6.1.4.1.9.9.63.1.3.1.1.9');
foreach $campo (@ret) {
$cuenta=$cuenta+1;
print $cuenta."\n";
But we don't know how to implement the "foreach" loop with the EXPRESSION-MIB... and we don't know any other way for getting the number of active calls.
Can anybody please help me?
Regards.

Hi, I've only changed the command:
snmpset -v 2c -c private router expExpressionValueType i 4
with:
snmpset -v 2c -c private router expExpressionValueType.1 i 4
and
snmpset -v 2c -c private router expExpressionValueType.2 i 4
because, an error message appeared if not using the index. So, finally, the commands used are the following:
snmpset -v 2c -c private router expNameStatus.110.110.110.110.110 i 6snmpset -v 2c -c private router expNameStatus.110.110.110.110.110 i 5snmpset -v 2c -c private router expExpressionIndex.110.110.110.110.110 gauge 1snmpset -v 2c -c private router expExpressionComment.1 octetstring "numeroEntradas"snmpset -v 2c -c private router expExpression.1 octetstring '$1 >= 0'snmpset -v 2c -c private router expObjectID.1.1 o 1.3.6.1.4.1.9.9.63.1.3.1.1.1snmpset -v 2c -c private router expExpressionValueType.1 i 4snmpset -v 2c -c private router expObjectIDWildcard.1.1 i 1snmpset -v 2c -c private router expObjectStatus.1.1 i 1snmpset -v 2c -c private router expNameStatus.110.110.110.110.110 i 1snmpset -v 2c -c private router expNameStatus.111.111.111.111.111 i 6snmpset -v 2c -c private router expNameStatus.111.111.111.111.111 i 5snmpset -v 2c -c private router expExpressionIndex.111.111.111.111.111 gauge 2snmpset -v 2c -c private router expExpressionComment.2 octetstring "sumaEntradas"snmpset -v 2c -c private router expExpression.2 octetstring 'sum($1)'snmpset -v 2c -c private router expObjectID.2.1 o expValueInteger32Val.1.0.0snmpset -v 2c -c private router expExpressionValueType.2 i 4snmpset -v 2c -c private router expObjectIDWildcard.2.1 i 1snmpset -v 2c -c private router expObjectStatus.2.1 i 1snmpset -v 2c -c private router expNameStatus.111.111.111.111.111 i 1
But there are no entries in the expValueInteger32Val OID, so later, in the sum expression, there is no elements to sum. Please, find attached 2 files with the snmpwalk outputs.
How could we get to have values in expValueTable?
Many thanks.

Kudos for a Verizon Call Center rep?

Just wondering where I can go or who I can talk to in order for a certain call center rep to get some deserved recognition. I have filled out customer surveys, called different folks within Verizon Wireless and still no result. I am now beginning to wonder if Verizon really cares about their employees like they say they do.
Here is the situation:
I had decided to leave Verizon Wireless after about 10 loyal years with them. First, when the "new every two" plan was discontinued it was and still is, a very sore spot for me and a lot of other longtime customers. Then, back in 2011, some "genius" decided we customers needed to pay $2 to pay our bill online. What a frigging farce. Hell, verizon, if you want $2 more a month, then raise the rates, be honest with the customer and be done with it. I hope the stupid s.o.b. that tried to implement this idea is now on the unemployment line. How frigging stupid can you be?
I had actually went to the point of purchasing a Straight Talk phone. I had planned on using this phone for a couple of months to see if it would do what I needed as far as phone and text service. I had a problem trying to activate the phone. I was scheduled for a cruise during this time frame and could not finish the activation. While on the cruise I was ranting and raving about Verizon Wireless. Sitting at the same table I was at was a lady who finally identified herself as a call center rep. She was very polite, explained that even though she was on vacation, she still had a responsibility to make any Verizon customer happy and to try to solve the problem, if she could. Now here we are, out in the middle of the ocean, hundreds of miles away from land, no cell phone service there, and this crazy lady is trying to solve my phone problems. Talk about dedication!!!!! End result, she made some suggestions for me to try once I got back home. I did what she suggested. Much to my surprise, everything pretty much fell into place. I added an additional internet line, allowing me to discontinue HughesNet. I also upgraded my phone to an IPhone, which is a really easy phone for us old folks to use.
As a result of the time and dedication this person took, not only did Verizon Wireless continue to keep me as a customer, I actually increased the amount of services I get from them. All because some lady, on vacation, literally in the middle of an ocean, took the time to listen to a crazy old man ranting and raving.
She truly deserves to be recognized not only by me, but by Verizon Wireless. She works out of Huntsville, AL.
Who can I contact to make sure she gets the pat on the back she deserves?

I am really glad to hear such a positive outcome for a possible bad situation, here is contact information that may help you voice your positive feedback.
Verizon's Corporate Office Headquarters in the USA:
140 West Street
New York, NY 10007
Corporate Phone Number: 1-212-395-1000
Corporate Fax Number: 1-212-571-1897

Avoiding request scope bean clashes for task flow calls

Hi,
I have two task flows, Tf1 calls Tf2 using a task flow call activity. The structures of the task flows are as follows:
Tf1
Managed Bean: TfBean, request scope
    class Tf1Bean
      has property goTf2Button
View: View1
    Button bound to #{TfBean.goTf2Button}
      Action -> task flow call to Tf2
Tf2
Managed Bean: TfBean, request scope
    class Tf2Bean
      has property testButton
View: View2
    Button bound to #{TfBean.testButton}
As you can see both have a request scope bean called TfBean but these are different classes in each. The bean classes have different properties for binding the components on the two pages.
When I click the button in View1 to navigate I get an error telling me that class Tf1Bean does not have the property testButton. Clearly Tf2Bean is not being instantiated as TfBean already exists for the request.
I'm guessing this is expected behaviour and it seems logical.
My question however is what would be good standards or practices to avoid this?
One way would be a naming convention, however what if I am consuming Tf2 from a library? In this case it would ideally work as a black box and I should not be concerned about it's implementation, specifically names chosen for internal managed beans. Even if it was not a problem initially, the developer of the task flow could add or change the name of a request scope bean introducing a conflict at a later stage.
Thanks,
Kevin

Hi Frank,
Good to meet you at UKOUG Tech13 yesterday. I changed my test case from request scope to backing bean scope. Unfortunately I still get the same error:
<RichExceptionHandler> <_logUnhandledException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.el.PropertyNotFoundException: The class 'yyy.view.Tf1Bean' does not have the property 'testButton'.
at com.sun.faces.application.ApplicationImpl.createComponentApplyAnnotations(ApplicationImpl.java:1900)
at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:446)
at javax.faces.webapp.UIComponentELTag.createComponent(UIComponentELTag.java:222)
at javax.faces.webapp.UIComponentClassicTagBase.createChild(UIComponentClassicTagBase.java:506)
at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:744)
at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1311)
at org.apache.myfaces.trinidad.webapp.UIXComponentELTag.doStartTag(UIXComponentELTag.java:67)
at oracle.adfinternal.view.faces.unified.taglib.nav.UnifiedCommandButtonTag.doStartTag(UnifiedCommandButtonTag.java:51)
...etc.
What I think is happening, please correct me if I'm wrong...
Running Tf1, page View1 is displayed.
Clicking the button on View1 initiates a request and an instance of Tf1Bean is instantiated for the managed bean named TfBean.
During the request navigation occurs to Tf2 and hence page View2.
View2 needs a property in TfBean called testButton.
There is already a managed bean instantiated for this request called TfBean, however this is of class Tf1Bean and does not have the property.
I have a simple workspace showing this if you want me to send it to you. I am using 11.1.2.4 by the way.
Thanks,
Kevin

SNMP for 6608 active calls

Similar Messages

Maybe you are looking for