SNMP for ACE Failover.

Hi Experts,
Could someone please let me know the SNMP settings for my ACE failover.
Query:-
When my active 4710 ACE load balancer fails for any reason(due to s/w or h/w) and the second 4710 ACE load balancer take over (becoming active), will there be a SNMP alarm send from the ACE?
If so, which SNMP alarm will that be and which SNMP settings need to be applied for this?
Thanks in advance. Appriciate your comment on this.
Regards
Fari

Hi Christopher,
I configured the SNMP but nothing is been seen on SYSLOG Server. But I am able to ping the syslog server from ACE as it is in the same subnet.
But the messeges are not getting recored to the syslog server. I reloaded the ACE and saw OID getting generated for link up/dow and restart but nothing been recorded on the syslog server.
Is this a bug?
Generating configuration....
Logging part config:
logging trap 3
logging history 4
logging host 10.10.10.5 udp/514
SNMP part config:
snmp-server host 10.10.10.5 traps version 2c private
snmp-server trap-source vlan 32
snmp-server enable traps snmp coldstart
snmp-server enable traps virtual-context
snmp-server enable traps license
snmp-server enable traps slb vserver
snmp-server enable traps slb real
snmp-server enable traps syslog
snmp-server enable traps snmp authentication
snmp-server enable traps snmp linkup
snmp-server enable traps snmp linkdown
However, I don’t see the OIDs you mentioned.Alsothere is no incoming syslog message from any of the ACE load balancer IP addresses shown.
Anyhelp would be appriciated. Thanks in advance.
Regards,
Fari

Similar Messages

RME 4.2 Inventory with no SNMP for FWSM

Looking at trying to get Config Archives setup for FWSM and ACE modules however we have SNMP
restricted in this portion of the network.
I understand that inventory polling must be present to get the devices into RME - is there a way we can get around not having SNMP for this inventory - a manual method maybe or some loophole we can work around?
Also will syslog work from these devices to RME?

To get the config archives, you simply need the telnet or SSH credentials in the DCR. Not having SNMP access will restrict RME from gathering device information for inventory collection and the device type will show up as "?" in the DCR. Syslog is used to trigger a sync archive if changes occurred but you will need to define the syslog server settings on the FWSM.

TCP connection for DHCP failover frequently are broken in Solaris 10

Hi
We have two dhcp servers which are installed in Solaris 10 and set to a failover pair. Currently, we can find that tcp connection for dhcp failover protocol are frequently broken. It looks like that primary dhcp server initiatively send FIN message to secondary one but in general, this tcp connection should always keep alive. On the other hand, the tcp connection can not completely be closed right now which FIN_WAIT_2 status in Primary one and CLOSE_WAIT status in secondary would last for a long time.
Will Solaris 10 cause this fault? Is it a known bug in OS?
OS info:
-bash-3.00$ cat /etc/release
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
-bash-3.00$
-bash-3.00$
-bash-3.00$ uname -a
SunOS edns1 5.10 Generic_142900-03 sun4v sparc SUNW,Netra-T5220
TCP connection info:
Primary DHCP Server:
2012 08 29 03:41:43
PING 172.25.6.137: 56 data bytes 64 bytes from edns2 (172.25.6.137): icmp_seq=0. time=0.678 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u   45 1024 377     0.75   -0.071    0.05
+idns2           195.26.151.151   3 u 162 1024 377     0.93    0.169    0.08
clusternode1-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
+clusternode2-pr idns1            4 u 406 1024 376     0.49   -0.154   15.12
172.25.6.133.647 172.25.6.137.58107 49640 0 49640 0 ESTABLISHED
172.25.6.133.647 *.* 0 0 49152 0 LISTEN
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2012 08 29 03:41:47
PING 172.25.6.137: 56 data bytes 64 bytes from edns2 (172.25.6.137): icmp_seq=0. time=0.535 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u   49 1024 377     0.75   -0.071    0.05
+idns2           195.26.151.151   3 u 166 1024 377     0.93    0.169    0.08
clusternode1-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
+clusternode2-pr idns1            4 u 410 1024 376     0.49   -0.154   15.12
172.25.6.133.647 172.25.6.137.58107 49640 0 49640 0 FIN_WAIT_2
172.25.6.133.647 *.* 0 0 49152 0 LISTEN
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Secondary DHCP Server:
2012 08 29 03:41:41
PING 172.25.6.133: 56 data bytes 64 bytes from edns1 (172.25.6.133): icmp_seq=0. time=1.26 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u 450 1024 377     0.92   -0.067    0.06
+idns2           195.26.151.151   3 u 552 1024 377     0.96    0.237    0.08
+clusternode1-pr idns1            4 u 360 1024 377     1.85   -0.528    1.51
clusternode2-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
172.25.6.137.647 *.* 0 0 49152 0 LISTEN
172.25.6.137.58107 172.25.6.133.647 49640 0 49640 0 ESTABLISHED
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2012 08 29 03:41:45
PING 172.25.6.133: 56 data bytes 64 bytes from edns1 (172.25.6.133): icmp_seq=0. time=1.36 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u 454 1024 377     0.92   -0.067    0.06
+idns2           195.26.151.151   3 u 556 1024 377     0.96    0.237    0.08
+clusternode1-pr idns1            4 u 364 1024 377     1.85   -0.528    1.51
clusternode2-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
172.25.6.137.647 *.* 0 0 49152 0 LISTEN
172.25.6.137.58107 172.25.6.133.647 49640 0 49640 0 CLOSE_WAIT
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thanks!

Thanks, but had found a previous discussion with this hint and applied it.
svccfg -s sendmail listprop shows config /local_only = false
Yes, I would really love to fix the fault, but what I would really like is some hints as to how to debug ports under svc control.

How to configure snmp for oracle

can any one send a document in configuring snmp for oracle

Go to http://tahiti.oracle.com
Search for SNMP
Sybrand Bakker
Senior Oracle DBA

ACS support for ACE Module

Does ACS for Windows 3.3 support AAA for the ACE module?

I don't think that is correct. I am still
having issues with ACE and ACS. See below:
ACE version Software
loader: Version 0.95
system: Version A1(7b) [build 3.0(0)A1(7b)
Cisco ACS version 4.0.1
I am trying to authenticate admin users with AAA authentication for ACE management.
This is what I've done:
ACE-lab/Admin(config)# tacacs-server host 192.168.3.10 key 123456 port 49
warning: numeric key will not be encrypted
ACE-lab/Admin(config)# aaa group server tacacs+ cciesec
ACE-lab/Admin(config-tacacs+)# server ?
TACACS+ server name
ACE-lab/Admin(config-tacacs+)# server 192.168.3.10
can not find the TACACS+ server
specified TACACS+ server not found, please configure it using tacacs-server host ... and then retry
ACE-lab/Admin(config-tacacs+)#

Replicating simple Java objects for automatic failover

Is there a way to replicate a simple java object that is bound from JNDI
          across all servers so that if the primary server fails, it will
          automatically failover?
          We have a java client that uses JNDI to access EJBs on WLS5.1 SP8. In order
          to determine client information, the client currently binds a simple java
          class in the JNDI tree. The Entity and Session beans use the caller
          principal to locate the object in order to access client-information for
          such things as record locking, logging, etc..
          We have to move this architecture to a cluster environment and we are
          wondering how we can replicate this object across cluster servers so that
          failover is handled automatically, and that it is still accessible through
          JNDI.
          An RMI replicated stub is not enough, since it only works as long as the
          server hosting the RMI object is alive.
          I'd like to add that the object is created and bound at client start-up and
          destroyed at client exit.
          Thank you for any advice or information,
          Dania Kodeih.


A: Replicating simple Java objects for automatic failover

That's what I figured. I guess the only solution in this case is to persist
          the object during client sessions. I was hoping for something simpler, but I
          guess I'll have to create an Entity Bean and everything else that comes with
          it.
          Thanks,
          Dania.
          Cameron Purdy wrote in message <[email protected]>...
          >Unfortunately, when the originating server goes down, the replicated object
          >disappears.
          >
          >Peace,
          >
          >--
          >Cameron Purdy
          >Tangosol, Inc.
          >http://www.tangosol.com
          >+1.617.623.5782
          >WebLogic Consulting Available
          >
          >
          >"Don Ferguson" <[email protected]> wrote in message
          >news:[email protected]..
          >> If I am not mistaken, any serializable object will automatically be
          >replicated
          >> across the tree.
          >>
          >> Dania Kodeih wrote:
          >>
          >> > Is there a way to replicate a simple java object that is bound from
          JNDI
          >> > across all servers so that if the primary server fails, it will
          >> > automatically failover?
          >> >
          >> > We have a java client that uses JNDI to access EJBs on WLS5.1 SP8. In
          >order
          >> > to determine client information, the client currently binds a simple
          >java
          >> > class in the JNDI tree. The Entity and Session beans use the caller
          >> > principal to locate the object in order to access client-information
    �... [Show more]
Read other 4 answers

SNMP over ACE not showing RealServer statistics

Hi All,
I have a semi weird problem. I´m trying to get statistics from my ACE, and I downloaded the MIBs for that and use a program to do a snmpwalk over these. My problem is this: I can get statistics for the Virtual Servers and also some for the real servers (IPs, description, preconfigured values, etc.), but not statistics for connections to the Real Servers.
Both in CISCO-SLB-MIB and CISCO-ENHANCED-SLB-MIB, when I try to do a snmpwalk over slbRealServers and cesRserverEntry, I receive a "no data available " message.
Any ideas will be appreciated.
regards

Hi,
If you look into CISCO-ENHANCED-SLB-MIB (rserver related MIB for ACE). It has cesRserverAdminStatus and cesRserverOperStatus in cesRserverTable. cesRserverTable gives stats of physical rserver (without sfarm association). In the same MIB, cesServerFarmRserverTable gives details of real severs with sfarm association. It has cesServerFarmRserverAdminStatus and cesServerFarmRserverOperStatus for status info. slbVServerState in slbVServerInfoTable of CISCO-SLB-MIB give vserver state.
HTH
Siva

PO for LAN failover and stateful failover link?

Hi.. We have 2 x ASA 5520s running ver 9.0. We plan to aggregate the 2 interfaces used for LAN failover and stateful failover into a lacp PO. So both the ASAs are connected to each other directly using these 2 interfaces and then we logically make it a one PO. We then assign the PO intface an ip. Is this supported?

You can use any unused interface (physical, redundant, or EtherChannel) as the failover link. (Source)
That said, It would be an uncommon implementation. I almost always see them on separate physical interfaces.

Toplink support for RAC Failover

We need to enable Toplink to support RAC Fast Connection Failover. We need to support
only read query retry functionality and not write query retry. We found one document
(http://www.oracle.com/technology/events/develop2007/presentations/oracle_jdbc_high_availability_load_balancing_best_practices_and_road_map.pdf)
that explains how to configure JDBC connection for RAC failover. However, since we
are using Toplink, we don't explicitly write our own jdbc url and toplink's session/uow
will automatically handle the actual sql query execution.
Is there any way we can configure Toplink to support RAC Fast Connection Failover, such
as possibly in the toplink's sessions.xml or in the oc4j container's connection pools setting?
Just for information, the way we acquire Toplink session is through SessionFactory:
   SessionFactory sessionFactory = new SessionFactory("repository",
                                 "META-INF/repository-sessions.xml");
   Session toplinkSession = sessionFactory.acquireSession();Then we do queries, acquiring unit of work, etc, using that toplinkSession.
Thanks.

We have enhanced our RAC FCF support in 11gR1 leveraging the new Universal Connection Pool to make it more seamless to the application. Which version of TopLink and OC4J are you using?
Doug

SNMP FOR ORACLE 10G?

Hi all!
i am trying to configure snmp with oracle 10g so that i can monitor oracle from some network management system like tivoli, spectrum etc.
i checked in my $ORACLE_HOME/network , but there is no snmp directory ...nor does it have peer. Do i need to run some script to create the snmp directories or there is another path for the
CONFIG.master
CONFIG.encap
start_peer
files??? Please let me know if someone has configured that???
Also, how do you test whether the agent is running on the server or not??

Hi,
I'm trying to configure snmp for oracle 10g on Linux using OEM agents.
I followed all the steps mentioned in:
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16244/chap2.htm#CHDCCEFB
I'm nto getting any output when I did snmp walk using below command:
snmpwalk -t 30 -M /usr/share/snmp/mibs/ -m all -c public localhost rdbmsMIB
When I did snmpwalk using below command:
snmpwalk -t 30 -M /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc -m all -c public localhost rdbmsMIB (only difference here with the above command is mibs directory)
output:
Cannot find module (CHARACTER-MIB): At line 7 in /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc/database.v1
Unlinked OID in RDBMS-MIB: rdbmsMIB ::= { mib-2 39 }
Cannot adopt OID in RDBMS-MIB: rdbmsWellKnownLimitedResources ::= { rdbmsObjects 10 }
Cannot adopt OID in RDBMS-MIB: rdbmsRelTable ::= { rdbmsObjects 9 }
Here I'm trying to monitor Oracle statistics through zenoss console. As an initial est i'm trying to configure the snmp for oracle 10g. Please provide me the complete list of steps on what to do after installing OEM for my requierment.
This will be a great help to me..
You can also mail me at [email protected]
Thanks,
Ranjeet

Configure SNMP for send trap in OEM 11g

Hi,
We have OEM 11g in our environment. We have to configure SNMP for send trap to third party application in OEM.
Our platform is Oracle Enterprise Linux 5.4 . We have installes SNMP in Platform . As mention in document (http://download.oracle.com/docs/cd/E11857_01/em.111/e14091/chap2.htm#CHDFDJJI) we configure MASTER.configer file. Then we started the SNMP agent by root user through command ./start_peer -a.
We configure SNMP rule in OEM and then assigned this rules to method.
But we are not able to send traps to third party application(IT360).
I am not able to integrate OEM 11g with IT360.
please suggest me, where i am going wrong in this configration? or i have to do some more configration?
Thanks in advance
Vikash

The SNMP reference manual has been removed from the 10g and 11g doc set.
You could consult the manual in the 9i doc set and check whether the files for your unmentioned platform still get delivered.
Sybrand Bakker
Senior Oracle DBA

Configure SNMP for Sending TRAP

Hi,
I have never work on SNMP and i need your help to configure the same.
We want to configure SNMP for sending trap related to database start and shutdown.But we don't want to use OEM Grid because it require license. So is there any way to configure the same without OEM.
Please help me with the document or link.
I got the reference guide to configure SNMP using OEM but i won't help me as OEM require license.
Thank You.
Regards,
Chirag

The SNMP reference manual has been removed from the 10g and 11g doc set.
You could consult the manual in the 9i doc set and check whether the files for your unmentioned platform still get delivered.
Sybrand Bakker
Senior Oracle DBA

SNMP for Catalyst 500G

Is it possible to configure catalyst 500G ports using SNMP? (How ?)
Or SNMP for this switch can be used only for monitoring purpose?

SNMP would be used only for monitoring.
Cisco Network Assitance tool is used which uses port 80 http.

UCCE for CCM failover with DNS SRV.

we are testing UCCE for CCM failover with Local DNS SRV. We have enabled the "Use DNS SRV type query:YES"&"Resolve SRV records locally:1" on CVP Call server configuration SIP tab.
The srv.xml file updated with CCM IP addrs in this path \Cisco\CVP\conf\srv.xml
On testing, the agent state moved to reserved state, but call is not delivered. Static Route is added for Phone Extension as "500>,proxy.ipcc.com".
What will be the issue? Kindly let me know what needs to be done.
Thanks & Regards
JP.

So, as Markus already figured out, you need to make sure that your CUCM actually understands that it is the intended recipient for these SIP INVITEs. I.e. if you define the static route to point to cucm.cisco.com you have to specificy the specify the Custer FQDN to be cucm.cisco.com under the 'Cluster Wide Domain Settings' in the CUCM Enterprise Parameters.
A second thing to watch out for the CUCM Group assigned to your SIP Trunks. Each SIP Trunk, like any CUCM device, has a Device Pool, the device pool has a UCM Group defining on which UCM nodes that device 'exists'. For phones that typically means : which UCM nodes can I register to ?
But for SIP trunks this means : which UCM nodes have a SIP deamon process for this Trunk and so which of the UCM nodes will actually accept INVITEs for this trunk. The most common cause for 503 Service Unavailable is probably this, (not all) the CUCM nodes in your DNS / srv.xml round robin are in the UCM Group assigned to the Device Pool configured on the SIP trunk for this Call Server.
Cheers,
Kris

Monitor TPS value for Ace Module

Hi Everyone,
I recently installed the license ACE-SSL-05K-K9 on ACE10 with multicontext solution.
The license provides 5000 Maximum number of SSL transactions per second (TPS).
The customer would like to track this to find out the correct size and in the case of services https upgrade licenses.
Can I do it so through particular output or it's necessary monitoring with snmp service? In the second case, can you tell me the oid string to use?
In case the module should receive a higher number of connections to that provided by the license, what's the issue for new https connections?
Regards
Dino

Hello Dino!
You can go into the Admin-Context and use sh resource usage all. Watch out for the ssl-connections rate. But I dont know the OID for this. But you can look into Cisco's MIB browser.
Cheers,
Marko

SNMP for ACE Failover.

Similar Messages

Maybe you are looking for