SNMP FOR ORACLE 10G?

Hi all!
i am trying to configure snmp with oracle 10g so that i can monitor oracle from some network management system like tivoli, spectrum etc.
i checked in my $ORACLE_HOME/network , but there is no snmp directory ...nor does it have peer. Do i need to run some script to create the snmp directories or there is another path for the
CONFIG.master
CONFIG.encap
start_peer
files??? Please let me know if someone has configured that???
Also, how do you test whether the agent is running on the server or not??

Hi,
I'm trying to configure snmp for oracle 10g on Linux using OEM agents.
I followed all the steps mentioned in:
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16244/chap2.htm#CHDCCEFB
I'm nto getting any output when I did snmp walk using below command:
snmpwalk -t 30 -M /usr/share/snmp/mibs/ -m all -c public localhost rdbmsMIB
When I did snmpwalk using below command:
snmpwalk -t 30 -M /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc -m all -c public localhost rdbmsMIB (only difference here with the above command is mibs directory)
output:
Cannot find module (CHARACTER-MIB): At line 7 in /RDBMS/oracle/product/10.2.0.4/grid10g/agent10g/network/doc/database.v1
Unlinked OID in RDBMS-MIB: rdbmsMIB ::= { mib-2 39 }
Cannot adopt OID in RDBMS-MIB: rdbmsWellKnownLimitedResources ::= { rdbmsObjects 10 }
Cannot adopt OID in RDBMS-MIB: rdbmsRelTable ::= { rdbmsObjects 9 }
Here I'm trying to monitor Oracle statistics through zenoss console. As an initial est i'm trying to configure the snmp for oracle 10g. Please provide me the complete list of steps on what to do after installing OEM for my requierment.
This will be a great help to me..
You can also mail me at [email protected]
Thanks,
Ranjeet

Similar Messages

Error while creating datasource userdsn for oracle 10g Errorcode (998)

while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Oracle gateway for Oracle 10g DB on Windows 64 bit server

Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.

yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database?

Long-term retention backup strategy for Oracle 10g

Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advance

Hello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

Can't Create the ODBC connection for Oracle 10g

Hi,
I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator library
Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
Best Regards,

mwz wrote:
I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not?

Where can I download the ODBC driver for Oracle 10g XE?

where can I download the ODBC driver for Oracle 10g XE?
I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driver

already checked these http://www.connectionstrings.com/oracle, I need Help Please.

SAP Note 830576 - Parameter recommendations for Oracle 10g

As per SAP Note 830576 - Parameter recommendations for Oracle 10g, I have tried to change the value for
parameter "db_file_multiblock_read_count".
In sql prompt it shows:
SQL> show parameter DB_FILE_MULTIBLOCK_READ_COUNT
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     128
and in brtools it shows:
58 - db_file_multiblock_read_count      both     no      *       yes   128
But I got the following error, when i tried to set it null
1 * Parameter description (desc) ..... [db block to be read each IO]
2 * Parameter type (type) ............ [integer]
3 * Current parameter value (parval) . [128]
4 * Value in spfile (spfval) ......... []
5 # New parameter value (value) ...... [null]
6 - Scope for new value (scope) ...... [both]
7 # Database instance (instance) ..... []
8 ~ Comment on update (comment) ...... []
9 - SQL command (command) ............ [alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD']
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2008-08-14 18.19.22
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0301E SQL error -32010 at location BrSqlExecute-1, SQL statement:
'/* BRSPACE / alter system reset db_file_multiblock_read_count scope = spfile sid = '''
ORA-32010: cannot find entry to delete in SPFILE
BR1017E Execution of SQL statement 'alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD'' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
Kinldy let me know, what could me wrong.

Hi Markus,
As per your suggestion we have downloaded the files from UCLIB_3-20000978.SAR. But now getting the error as
sapccmsr -DCCMS -j2ee pf=profile value
INFO: use SAPLOCALHOST hostname
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XX1_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XX1_00/sapccmsr/csmconf
INFO: Central Monitoring System is [XX1]. (found in config file)
INFO: additional Central Monitoring System is [AS2]. (found in config file)
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
This program runs as unicode. Please use non-unicode version
Please suggest
Thanks,
Anu

Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?

Hi all,
I am lil bit confuse to decide about my oracle core dba certification.
Please help me to know, as per the present requirements of the business organizations.
***Should I go for Oracle 10g OCA/OCP or 11g OCA/OCP Certification?***
Hope u guys answer me earliest.
Thanks & Regards,

Most likely, it doesn't matter too much. I doubt that most employers are terribly concerned with what recent version of Oracle you have a certification on.
That said, if it matters
- What does your organization use? What are their plans to upgrade? If your company still uses 9.2 primarily and has plans to upgrade to 10.2 this year, you're probably better off with a 10g certification. If your company is already running mostly 11.2, you're probably better off with an 11g certification.
- What do most employers in your particular part of the world tend to use? What do job postings in your particular part of the world generally list?
Justin

New features for oracle 10g DBA

hi all,
i want to download new features for oracle 10g dba in free, but i cant found it free.so if somebody know anylink which provide it free or if somebody have it.plz let me know.i need it on urgent basis.
Ihsan DBA from Pak

http://www.oracle.com/pls/db102/to_toc?pathname=server.102%2Fb14214%2Ftoc.htm&remark=portal+%28Getting+Started%29
Could you not download from here?

PL/SQL New Features for Oracle 10g

Hi,
If anybody asks what are the new features in PL/SQL for Oracle 10g version, what would be the answer?
Thanks,
Mrinmoy

user3001930 wrote:
Hi,
If anybody asks what are the new features in PL/SQL for Oracle 10g version, what would be the answer?
Thanks,
MrinmoyI would say: Who cares about 10g features nowadays. And they I would tell them about the new 11g features (that I remember).

Golden Gate 32bit for Oracle 10g and 11g

Does oracle released Golden Gate 32bit for Oracle 10g and 11g, i could not able to find out 32bit http://edelivery.oracle.com or OTN.
Thanks

never mind, i was able to download from e-delivery.

SUNWsprox package with solaris 10 for Oracle 10g Installation....

Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed Tanvir

Hi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger

Errors using DBMS_SQLTUNE Advisors for Oracle 10g

I get errors trying to tune the below query for Oracle 10g using the DBMS_SQLTUNE advisors.
It happens when I wrap either a large block of PL/SQL code that uses bind variables or multiple nested subqueries with multiple JOIN conditions in a SELECT query statement that I wish to tune using the 10g SQLTUNE advisors.
Message was edited by:
benprusinski

Hi, I was trying to use the DBMS_SQLTUNE package to tune my sql statements used in the huge procedure. I can successfully create a task and execute it. But when I run report tuning task, I'm always getting error like the one in below example. Two questions I have now.
1) Is this becuase I'm using bind, but not passing any values?
2) Can I able to use to this package to tune a procedures instead of sql statement?
Example output...
SQL> SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK( 'my_sql_tuning_task3')
2 FROM DUAL;
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
GENERAL INFORMATION SECTION
Tuning Task Name : my_sql_tuning_task3
Tuning Task Owner : SCOTT
Scope : COMPREHENSIVE
Time Limit(seconds) : 3000
Completion Status : COMPLETED
Started at : 02/26/2009 21:44:41
Completed at : 02/26/2009 21:44:41
Number of Errors : 1
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
Schema Name: KPRAVEEN
SQL ID : 479831s42xj1n
SQL Text : SELECT a.pdrorn, a.pdrcto, a.pdrlln FROM f4311 a
WHERE a.pddoco = receiptsrcrec.prdoco AND a.pddcto = :2 AND
a.pdkcoo = :3 AND a.pdsfxo = :4 AND a.pdlnid = :5
ERRORS SECTION
SQL>

Enable autoarchiving for Oracle 10g RAC db

Hello
What are the steps to enable autoarchiving for Oracle 10g cluster database?
It is currentrly in noarchivelog mode.
Thank you,
Yelena

Hi.
I think that this has been improved in 10g, so that we can do an exclusive mount on any database in a RAC without setting cluster_database to false. Also the parameter log_archive_start has been depreciated so the steps is simply (assuming that you by default wants to use db_recovery_file_dest to store archived redo logs)
1) Shutdown immediate (instance 1)
2) Startup mount
3) Alter database archivelog
4) Alter database open
Repeat this sequence for all nodes in the RAC.
And the best is to leave the log_archive_format by it's default value, to ensure that the incarnation of the database is represented in the archive log name.
(On 10g, backupsets and archivelogs are usable beyond different reincarnation of a database, so there is a good change that S% or s% will repeat itself after an open resetlogs).
Hopes this might help you.
Good Luck
Rgds
Kjell Ove

SNMP FOR ORACLE 10G?

Similar Messages

Maybe you are looking for