SNMP Informs and time-outs.

I understand that SNMP Informs is an alternative to SNMP traps which can send the information if the acknowledgement is not received for a packet sent.
I have a problem here.
SNMP Informs sends as many packets as that of the configured retries parameter. I do configure a parameter time-out. Does it mean that the packets will be sent one after other with a time interval configured as time-outs ?
I did see packets sent one after other instantaneously, Is there any way of controlling the time-interval between the packets.
Thanx in advance.
Regards
Ashraf

The command to set retries, timeout's etc is: snmp-server informs [retries retries] [timeout seconds] [pending pending]
When a trap is sent to the manager, the sending station does not wait for an acknowledgement and assumes that the message reached the destination sucessfully. However, when an Inform is sent, the manager will acknowledge the receipt of the inform request. If the sending station does not receive the acknowledgement within a specified period of time (called the timeout), the inform will be retransmitted. Once again the sending station will wait for a period of time (specified earlier as timeout). The sending station will continue retransmission of the inform till it receives the response message or if the number of retransmits becomes equal to the maximum specified retransmission attempts (specified as retries). The parameter 'pending' specifies the maximum number of informs waiting for acknowledgments at any one time. More information is available at http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113t/113t_1/snmpinfm.htm.

Similar Messages

  • SAP SNC Portal DCM screen performance is very slow and times out

    Friends,
    SAP SNC Portal DCM screen performance is very slow and times out when user trying to pull data using customer location
    What are the cleanup activites we can do to improve the overall SNC performance ?
    We did open OSS message but so far no reply from SAP , Is there any one faced performance issue ?
    User/vendor is complaining about slowness , query is standard SAP and its taking more time  .(table - /LIME/NTREE) , It looks like number of data are huge causing this problem related to LIME/NTREE table. What are the options to improve the performance ?
    Thanks in Advance
    Hanuman Choudhary

    hi Team,
    Pls . note the advise from SAP below, IS there any have experiance of archiveing /LIME records ?
    Please advise how to start & what the steps in archiving ?
    Thanks in advance
    I had a look at the DCM query performance in PH1 system and figured out
    that most of the time is spent at the LIME layer of database. The
    following LIME tables are having far too many entries and is causing
    the bottleneck during the query execution.
    /LIME/NLOG_QUAN - 38,165,467
    /LIME/PN_ITEM - 19,116,518
    /LIME/PN_ITEM_TB - 19,154,124
    These tables are storing the historical information about LIME(stock)
    updates. Since these table grow with each change/update of stock
    information, it will slow down the performance of the system over a
    period of time. And to avoid the slow responses, the tables should
    ideally be archived on a periodic basis to keep the data volume as
    minimal as possible. You may have to discuss with the Business to
    determine the number of days of LIME record you would want to retain
    in the system. I would strongly recommend you to consider the LIME
    archival retaining the minimum days (<=60 days) of historical
    information. You can find more information about the Lime Archival
    in the Sap Help link:
    http://help.sap.com/saphelp_scm2007/helpdata/en/44/2a83121dde23d1e10000000a1553f7/frameset.htm.
    Kindly get in touch with your BASIS consultant for the LIME archival.
    The application performance should definitely improve after the LIME
    archival. Please do not hesitate to get in touch with me in case you
    require any further clarification in this regards.
    Best Regards

  • My firefox will allow me to open a page then it gets stuck on the second page and times out--how do I fix this. I have checked the sites on Explorer -it works

    It started with the second page not being able to be displayed
    example it would go to yahoo and I would sign in but the next page would just spin and time out
    Now it won't even go to the first page.
    Firefox will not let me go into the options to change cache.
    I am trying explorer and it works.
    Help

    This is a page within the Yahoo site? When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In that dialog, you can individually remove your yahoo.com cookies.
    Then try reloading the page. Does that help?

  • Can't access Web Site, super slowly and time out!

    Hi all,
    I am using Server 2012 R2 with Hyper-V, HP DL360 G6 Server
    The Master OS have a NIC1 to VLAN1 Switch (Also in the Cisco SG300 Switch)
    Plus other NIC2 connect to Cisco SG300 28 Switch (Running in L3 Mode), this Cisco then connect  to a SonicWALL NSA 2400.
    I build some VLAN31 on SonicWALL NSA 2400, and add this to the Cisco SG300 as Truck Port connect Both...
    Other Port on the SG300 are untouch, so mean default running mode is Truck mode, and one of it port connect to the NIC2 to the Server ...
    Ok, if Hyper-V VM, not enable VLAN in the Hyper-V Management in 2012 R2, it can take the DHCP from the SonicWALL NSA 2400 no problems, can see other LAN (VLAN1) machine well both direction, and go to Internet too.
    But, if I setting the VLAN31 on Hyper Manager to some VM, it can take the DHCP and take the IP from SonicWALL for this VALN31, include DNS, GW etc...
    But ... it just can ping internet, for example, ping www.yahoo.com it ok, but open IE, enter www.yahoo.com will super super slowly and time out, if running CentOS 6.5 Linux, enter yum update, it total not work, time out, 0.2kb/s etc. But it can ping to www.yahoo.com
    no problems...
    And If Windows run routert www.yahoo.com, over 10s to see next hub ...
    I am double checked SonicWALL NSA2400 Firewall Policy is allow all VLAN and LAN to WAN, and VLAN TO VLAN too..
    What is wrong on the Hyper-V VLAN? Do I am setting wrong of my switch port mode (Access/Trunking)?
    I am now out of direction what is go on to troubleshooting this.
    Thank you.

    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : JimmyChan-G6-01
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Ethernet 5:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
    nnection #2
       Physical Address. . . . . . . . . : 00-1B-78-5A-B2-81
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Ethernet 4:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
    erver Adapter #52
       Physical Address. . . . . . . . . : 00-26-55-23-1F-E2
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Ethernet 3:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC382i DP Multifunction Gigabit Server
     Adapter #49
       Physical Address. . . . . . . . . : 00-26-55-1A-26-F8
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::1de6:509d:b011:775a%14(Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.218.157(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.218.1
       DHCPv6 IAID . . . . . . . . . . . : 436217429
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
       DNS Servers . . . . . . . . . . . : 8.8.8.8
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Ethernet 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
    nnection
       Physical Address. . . . . . . . . : 00-1B-78-5A-B2-80
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::acb8:319f:2c75:f829%13(Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.101.11(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . :
       DHCPv6 IAID . . . . . . . . . . . : 218110840
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Ethernet:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
    erver Adapter #51
       Physical Address. . . . . . . . . : 00-26-55-23-1F-E0
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{A9915F4B-84C6-4168-8E25-909FD2105BD9}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{E893BCF0-EA57-4E6D-8406-1B6ECF27A1C1}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    C:\Users\Administrator>
    Above  is the Server 2012 R2 Master Host (Mother)
    But ... actually still have one Ethernet 6 NIC Card there, it also NC382i, buildin HP DL360 G6 NIC... This card is connect to the Cisco SG300 28 Switch and the Server, and make this card as for Hyper-V Switch (Extenal) ...
    I don't why run ipconfig /all not see this card above ..
    If you need Screen Capture, let me know ...
    THX

  • When I try to open certain slide shows, my computer gets the spinning wheel and times out. Other slide shows open fine. What am I doing wrong?

    When I try to open certain slide shows, my computer gets the spinning wheel and times out. Other slide shows open fine. What am I doing wrong?

    Hard to say but most likely you are not doing anything wrong but have some library corruption
    What version of iPhoto? Of the OS?
    backup your iphoto library, depress the command and option keys, launch iPhoto and rebuild your database
    LN

  • Software update stalls and times out

    Recently when running Apple Software Update on my laptop (running Vista), I've noticed that when trying to download either of the pieces of software available in the update system (VoiceOver 1.3 or MobileMe Control Panel), that it stalls with 1.1 MB remaining and times out after several minutes. I've tested this on Windows 7 with the same result and have attempted to fix by removing/reinstalling, as well as repairing the software, but to no avail.
    Is there a workaround for this issue? I know for sure that VoiceOver is asking to be downloaded via Apple Software Update, and I hope the 404 error on the MobileMe Control Panel has righted itself.

    Hmmm.
    In the meantime, are you able to get the MobileMe control panel via the Download page at the Apple Website?
    http://support.apple.com/kb/DL769
    If you get any sort of error message on the install when you download via your browser, let us know what they say.

  • I have Problem uploading photos to craigslist. It says it has a problem communicating with the server and times out. It works in explorer but not Firefox and I just recently downloaded the new version of firefox. Can you be of any help?

    Photos will not upload and the server times out.

    Well, two thoughts.
    The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
    The battery has deep discharged and is now dead. It will never recharge and should be replaced.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
    The flat fee for a battery exchange is, I believe, $99.00 USD.

  • New apps won't install, just bouce in the dock and time out

    Was wondering if anyone could help me out with this. I'm in Japan and apple support in English seems to be manned by one guy whose only solution to any problem is to backup everything and reinstall. Getting kind of frustrated.
    Lately, I am unable to install new software I download from the web. It downloads the package, loads the disc image and if I click on install.app , the icon bounces in the dock for about minute then times out and I have to force quit it. If I install an app that just requires dragging the app into the app folder, when I try to open it, the same thing happens. I can't pinpoint when this started or what might have caused it but the last app I was able to successfully download and install was a trial version of Bento. I've tried about 10 different apps and its the same problem with each.
    Any ideas what might be causing this? Help is very much appreciated!!

    Thanks Daniel!
    Onyx worked. Though I'm not sure what part of it worked. I had to try several different cleanings and whatnot. Seems like the problem might have been Desktoptopia. I remember now, when I installed that software, these problems came up. Now, everytime I reboot, I get a "are you sure you want to open this file downloaded from the internet" box for desktoptopia even though I can find no trace of the app on my computer anymore. Very strange.
    Anyway, at least apps are installing again. Thanks!

  • Safari hangs and times out on pages with CGI scripts

    I don't know if this is a Safari problem or a system wide problem. I running OS 10.4.9 with Safari 2.0.4. When I try to load a page that begins with "http://cgi." it begins to load but hangs and eventually times out. Has anyone else run into this problem? I did a search of the forum but came back with no results.
    PowerBook G4   Mac OS X (10.4.9)  

    I don't know if this is a Safari problem or a system wide problem. I running OS 10.4.9 with Safari 2.0.4. When I try to load a page that begins with "http://cgi." it begins to load but hangs and eventually times out. Has anyone else run into this problem? I did a search of the forum but came back with no results.
    PowerBook G4   Mac OS X (10.4.9)  

  • SMTP very slow/errors and times out in mail.app

    I have a series of account set up that are working great except for my work mail (exchange IMAP). The server it's on is pretty slow, and this is complicated in mail app as I get constant SMTP send errors "the server rejected the address...." it's very intermittent - I can have an hour where everything sends just fine, and others where it just doesn't work. Connection doctor takes at least 10 seconds to successfully connect.
    Is there a way to adjust the time out value on mail.app so that it doesn't immediately fail to send?

    Let us separate between the intermittent SMTP errors and the slowing down for the time being. What happens (and how long it takes) when you open a shell and connect to the SMTP server ? For example, try something like this:
    ]# telnet smtp.google.com 25 (if your smtp server is imap google)
    try to send a simple message and see how long it takes, e.g.
    helo smtp.google.com
    --

  • Maximum number of pages in Chapter? iBA crash and time out issue.

    Hello,
    I'm trying to put together a book with roughly 17,000 pages where each page is a single full page image displayed inline and is between 2 and 3 kb.. Preferably these would all be in a single chapter, but I run in to issues with this at around 2,000 pages. iBA will crash and when I try to reopen the file it will either time out or take several minutes.
    Dividing my book in to chapters with around 250 pages each keeps iBA from crashing, but unfortunately the chapter structure doesn't make sense for the book.
    To try to help iBA to run smoothly I've right clicked on the application icon, selected "get info" and then checked the box next to "run at low resolution". I've also disabled the display of thumbnail previews of pages in the app.
    Is there anything else I can do to make iBA run faster? (Can I allocate more memory to it somehow?)
    Is there a way to combine chapters?
    Also, if anyone has ideas of ways to structure my pages that might use less memory than displaying my images inline, I'd be open to hearing that too.
    Any help or suggestions are very much appreciated.
    Thanks

    A finished, exported iBooks file to be uploaded to the store...is limited to 2 gigabyte file size..whatever your content.
    If your computer is running slow, you need to close all applications not needed.
    Also when creating a large book file, its advisable to create chapters individually...giving a more manageable work file.
    Create a master template  and open..save the book as a master copy and save it. Open a copy of..the master copy snd name it ..say Chapter one...and repeat as needed. when done, copy the chapters from 2 onwards into the chapter one book, if needed, drag and drop the chapters up or down the tree to get the right order.

  • Query runs slowly and times out in CF 8

    I'm trying to run this query using Coldfusion 8 and MySQL 5.
    If I run the query directly off the database the results are
    returned very quickly.
    If I run the query through CF 7, it's pretty slow but still
    runs. If I run the query through CF 8 it takes FOREVER, then times
    out.
    Any ideas what could be going wrong here?
    I'm no DB expert. But if the query can run quickly directly
    off the DB OK, but then bombs out in CF 8, that the problem might
    be with CF 8 itself?
    <cfquery name="theOrders"
    datasource="#Application.ds#">
    SELECT o.orderid, o.dealer, o.dealerRep, o.dealerPO,
    o.dealerShippingInstructions, o.dealerFreightCollect,
    o.othershipping, o.billoflading, o.carrier, o.othercarrier,
    o.serialno, o.ShippingDate, o.Shipping, o.ShippingTotal,
    o.SaleSubTotal, o.SaleTotal, o.Tax, o.Discount, o.DiscountRate,
    o.Status, o.DateIn, o.bFirstName, o.bLastName, o.bAddress1,
    o.bAddress2, o.bCity, o.bState, o.bZip, o.bPhone, o.sFirstName,
    o.sLastName, o.sAddress1, o.sAddress2, o.sCity, o.sState, o.sZip,
    o.sPhone, o.sPhone2, o.Message, o.dealerShippingInstructions,
    o.bCompany, o.sCompany, o.bEmail, o.ipaddress, o.oAuthorization,
    o.CCType, o.CCNum, o.CCName, o.CCYear, o.CCMonth, o.entryDate,
    i.RelProductID, i.Quantity, i.RelUnitPrice, i.Shipping, i.Discount,
    i.title
    FROM tblorders as o, tblorderitems as i
    WHERE o.OrderID=i.Relorderid
    ORDER BY OrderID ASC
    </cfquery>

    The server monitoring tool that is built in CF8 can help
    debug this issue quickly. It can give you report about query
    execution time, time taken by a tag to execute and lot more other
    details.
    You can launch sevrer monitoring via CF Administrator.

  • Have been trying for 4 days to do an update that takes 4 hours and times out everytime at 2 seconds. Any ideas why?

    Have been trying for 4 days to do and update that takes 4 hours each time. It always times out on the last 2 seconds every time. Any ideas why?

    hi u seem to know alot about ipods, would u mind helping me with a problem that i am currently havig with my menu button on the iod touch 4th generation?

  • Cannot transfer response group calls that are parked and time out

    Hello all,
    Need your help with a peculiar issue. The deployment consists on one Lync Server 2013 Front End server acting also as mediation server. Communication with the PSTN is through a ITSP (no SBC on place).
    There is a response group created for the main line (the office's published number) that plays a greeting and then it sends the call to a queue (in attendant mode). Any user available picks up the call, puts it on park and IM'es the final recipient (which
    uses any phone to pick up the call). Everything works as expected, except when the call in the parking lot times out, it rings back on the client that picked the call first, but when he picks it up, it doesn't show the options to transfer the call. The top
    of the call window says "Connecting call...", but the call is connected and the person is able to talk with the person that was on parking.
    I have reviewed the client's log file using Snooper, and there is not errors. In the CDR records, everything seems normal.
    The curious thing is that if the call goes directly to the user (using his DID or on a Lync to Lync call) and the calls is parked and it times out, it connects normally, and the user can transfer the call or put it on parking again. The problem happens only
    whit calls that are pick up from the response group.
    Any ideas?
    Patricio Carpio.

    Please check if this issue happens with other Response Group agent.
    As the status “Connecting call” exists, this may cause the option “transfer the call” missing.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Parallel processing and time-out

    Hi all,
    I've got a prob with doing a great number of postings.
    While the time elapsed for these postings is too long, I tried to do it with an function module and "IN BACKGROUND TASK". Well, there is also a alternative "STARTING NEW TASK".
    But I figured out, that these both variants are starting dialog work processes. I think there is a time out for dialog WP's of 300 seconds in standard.
    Will this timeout kill the processes or not??
    And witch alternative is the best to do some parallel processing??
    thanx in advanced
    regards
    Olli

    Hi Oliver,
    Some solutions here:
    1. You could increase the value of the dialog time-out (allthough this can only go to a maximum of 600 seconds). This parameter is in the SAP profiles (parameter name = rdisp/max_wprun_time).
    2. As suggested by Christian, decrease the amount of work within one LUW. You can do this by inserting (from time to time) a COMMIT WORK. This COMMIT WORK also resets the timeslice counter of the running dialog process (thus giving again an extra timeslice to work). The downside is, that if you have many related objects to modify, your ROLLBACK options become limited.
    3. Split the proces in several tasks and put the to work in the background (by scheduling jobs for them).
    4. Program your own parallel handler (see sample code). With this you could process document by document (as if each is done separately). The number of dialog processes (minus 2) is the limit you could use.
    Sample code:
    * Declarations
    CONSTANTS:
      opcode_arfc_noreq TYPE x VALUE 10.
    DATA:
       server       TYPE msname,
       reason       TYPE i,
       trace        TYPE i VALUE 0,
       dia_max      TYPE i,
       dia_free     TYPE i,
       taskid       TYPE i VALUE 0,
       taskname(20) TYPE c,
       servergroup  TYPE rzlli_apcl.
    * Parallel processes free check
    CALL 'ThSysInfo' ID 'OPCODE' FIELD opcode_arfc_noreq
                     ID 'SERVER' FIELD server
                     ID 'NOREQ'  FIELD dia_free
                     ID 'MAXREQ' FIELD dia_max
                     ID 'REASON' FIELD reason
                     ID 'TRACE'  FIELD trace.
    IF dia_free GT 1.
      SUBTRACT 2 FROM dia_free.
      SUBTRACT 2 FROM dia_max.
    ENDIF.
    * You must leave some dialogs free (otherwise no one can logon)
    IF dia_free LE 1.
      MESSAGE e000(38)
         WITH 'Not enough processes free'.
    ENDIF.
    * Prepare your run
    ADD 1 TO taskid.
    WRITE taskid DECIMALS 0 TO taskname LEFT-JUSTIFIED.
    CONDENSE taskname.
    * Run your pay load
    CALL FUNCTION 'ZZ_YOUR_FUNCTION'
      STARTING NEW TASK taskname
      DESTINATION IN GROUP servergroup
      EXPORTING
    *   Your exporting parameters come here
      EXCEPTIONS
        communication_failure  = 1
        system_failure         = 2
        RESOURCE_FAILURE       = 3
        OTHERS                 = 4.
    Of course you would put this within a loop and let your "payload" function fire off for each document.
    You MUST check the number of free processes just before you run the payload.
    And as last reminder: Do NOT use the ABAP statement WAIT (this will disrupt the counting of free processes).
    Hope this will help you,
    Regards,
    Rob.

Maybe you are looking for

  • Ipod touch no longer showing up in itunes after connecting to laptop.

    I downloaded itunes on my new laptop that runs windows 7.  Since I hadn't updated itunes on the pc, I connected the ipod to my pc (which runs windows xp). A screen pops up that basically alerts me that I have a digital camera installed.   I have upda

  • Configuring multiple listeners in a non-RAC env.

    Hi, Our database is being made as many as 35 requests per second by the application during peak hours. This is causing the listener to die. Metalink suggested to configure more listeners so that they can balance the load. When I tried to configure 2

  • Dynamic Parameter List questions: Length and Custom Values

    I've got a Crystal Report that I want to use Dynamic Values for. Right now... this report is simply a "SELECT stuff  FROM table" SQL query... with a parameter that the report uses to filter. I use a "Select DISTINCT value from table" to generate a li

  • IPhoto not displaying images

    If I open an album in iPhoto, all images are at first shown on screen. But when I scroll down, they disappear, turning into blank boxes. If I click on those boxes, nothing appears. Any ideas? Thank you.

  • Ability to CC someone on Eloqua Email, Engage Email

    Hello Fellow Eloquans! I recently received an email from one of the Marketing Users at my organization regarding CC-ing someone on an email that's coming from Eloqua.  Upon doing some research, I've seen several other posts on the topic and wanted to