Snmp issue on ASA5510, empty reply on oid .1.3.6.1.2.1.31.1.1.1.18

Hey all,
I currently have 3 ASA5510's (versions 7.2(3), 8.0(4) and 8.2(1)) which fail to reply with the description value I added on the interface.
I noticed the problem through our Cacti graphs and then checked with snmp-walk.
I've tried both v1 and v2c, no difference.
All other values are returned properly, just not the IfAlias values I'm looking for.
Does anybody have similar experience and a solution in hand?
Many thanks in advance.

Yes, you have the snmpEngineTime / .1.3.6.1.6.3.10.2.1.3 option on IOS 12.0(3)T or later, as explained in this post:
https://supportforums.cisco.com/message/573246#573246

Similar Messages

NAC 4.7.2 OOB SNMP issues

Hello,
I am setting up a NAC CAM and CAS 4.7.2 OOB setup in a test environment (NAC failover for CAM and CAS), and I am seeing some strange SNMP issues. I am testing with a 3750 switch (12.2(53)SE1) using SNMP v2 and v3 since v3 and accessing the switch port configuration in the NAC manager is extremely slow. I click OOB Management -> devices -> switch XXX and it takes several minutes for the port listing to display. Then sometimes it comes up quickly but a 'show debug snmp' on the switch shows that it isn't polling the switch so it apparently starts pulling the ports page from cache, but I can see now logic in how it does this.
Q1) When and why does the ports page pull cached info?
Q2) Why is SNMP queries operating so slowly with NAC 4.7.2 OOB?
Here is my test switch/NAC SNMP config (with pseudo names and fake passwords):
snmp-server community switch_read ro (matches OOB Management -> Profiles -> Device -> SNMP Read v2 settings)
snmp-server view v1default iso included
snmp-server user switch_write switch_group v3 auth md5 <my-password> (matches OOB Management -> Profiles -> Device -> SNMP Write v3 settings)
snmp-server group switch_group v3 auth read v1default write v1default
snmp-server user cam_notify cam_group v3 auth md5 <my-password>
snmp-server host 10.200.11.100 traps version 3 auth cam_notify mac-notification snmp (matches OOB Management -> Profiles -> SNMP Receiver v3 settings)
snmp-server group cam_group v3 auth read v1default write v1default notify v1default
What is wrong with my setup? Any help is appreciated.

Did anyone ever find a solution to this issue? I'm having the same problem.... it takes minutes to open the ports on a switch in the CAM. It shouldn't take minutes to manage ports for each switch, it should take less than 10 seconds...

6500 VSS SNMP issues

We recently converted 2 6506-E chassis to use VSS w/ Quad-Sup and noticed that several SNMP OIDs we used for monitoring have stopped working.
OID 1.3.6.1.4.1.9.9.217.1.3 only provides module statistics for the active chassis, rather than both.
OID 1.3.6.1.4.1.9.5 no longer exists as an object. We monitored numerous items under 1.3.6.1.4.1.9.5.1.3.1.1 which are no longer available.
Has anyone encountered these issues after converting to VSS and/or do you have any suggestions with how to deal with them?
Thanks,
-Kevin

I am having similar issue on 4500-X VSS, ENTITY-MIB only available on active chassis.

SNMP issues after upgrading Guard

We recently upgraded one of our Cisco Guards from 6.0(10) to the latest version (6.1(2)) and now the following OID's do not appear to work/exist any longer:
rhNEAcceleratorCPUUtilization.1
rhNEAcceleratorMemoryUtilization.1
The ability to graph these are critical due to the following bug:
CSCsc05116 - The Guard may stop functioning or start logging errors after reaching 100 percent anomaly detection engine memory utilization. Workaround: Use the show resources command in global mode to view the amount of anomaly detection engine memory currently being used by the Guard. Reducing the number of active zones may free up memory.
I thought that maybe they changed the way it is queried but was unsuccessful with anything else I tried (using the latest MIB).
I apologize if I have posted this in the wrong place.
Any help is greatly appreciated.
Thank you.

There is a bug filed for this issue you have mentioned and the work around for this issue is that the Anomaly Detection memory should be freed by deactivating one or more zones, or alternatively by disabling several number of policies/services.
You can delete a specific service relating to a policy template.
To delete a service from a policy, enter the following at the policy template prompt:
remove-service service-num

SNMP issue in shared printer

Hi,
We have a print server with Windows server 2k8 64bit, it has around 30 printers configured in it. recently we removed the legacy printer and installed new printers with same ip and name and updated the drivers.
After we updated the drivers, the newly added printers show offline status in the print server, however we are able to ping the printer and also able to access the web interface of the printer.
The printers come to ready status when i disable the SNMP in the port configuration option. as SNMP is a need for us to monitor the printers, Kindly assist me in fixing this issue as many printers are affected now ...
Printers are canon branded.

Ping nor the web page on the device require SNMP.
Are the Standard TCP/IP Ports configured with the same SNMP community name that is set on the device?
Also verify that you have enabled SNMP on the devices.
You should be able to use snmputil.exe to walk the device mib.
Here are the instructions. But I was unable to find the file in the list of Win2k Resource kit. If the first two items check out, go searching for the tool and confirm the SNMP information gets returned from the device when queried.
http://support.microsoft.com/kb/232663/en-us
Alan Morris formerly with Windows Printing Team

Windows 2008 R2 - Printer "Offline" SNMP issue.

The issue:
Not unique from what I have read in these forums and elsewhere around the globe. But essentially, I have printers that go "offline" and only come back into life if I disable SNMP per printer port and therefore lose any "real" status messages.
Some Environmental Information:
- The printers and the print server are on the same logical subnet
- There is no filtering/Firewall between the printers and the print server and not relevant given they are on the same logical subnet.
- The firewall is disabled on the Print Server
- The SNMP community string(s) configured on the printer matches that of the print server port
- The manufacturing model of the printer varies. Various print vendor makes and models, of the 5-6 affected devices, all of them are different.
The following information relates to the newest printer a Ricoh Aficio MP C4501, manufactured and released in 2011 which is one of the models that has the issue
- The Printer's NIC firmware is up to date (applied myself as I work for this particular print vendor) and is fully compliant with SNMP V1, V2 and V3 and supports all relevant MIBs
- When the issue occurs, I can access the printer's web configuration page
- When the issue occurs, I can ping the printer device showing "offline" on the print server
- When the issue occurs, I can interrogate the printer device using an SNMP browser (many different types) on SNMP V1, V2 and V3 without issue
- When the issue occurs, I can monitor the device and get detailed status updates using SNMP V1, V2 and V3 in the print vendors own device management application as well as Spiceworks without issue
Note:
I am quite confident that there is not a communication issue with SNMP to/from the device.
I am quite confident that there is not an issue with the printers NIC in terms of firmware
I can get around this by disabling SNMP per port, but this is _NOT_ a fix because "actual" status' other than "online" are never reported.
Summary:
I'm going out on a limb here and suspecting that the root cause is not the device, firmware or print driver, but in fact something within Windows Server Print Subsystem. To that end and given there has been a huge amount of discussion on this issue,
is there any progress or even acknowledgement that this _MIGHT_ be a problem that Microsoft need to address?
--------------------------- ASE, CNE, CCNP, CLP, MCSE --------------------------

Hi Alan,
Lately I experienced this "printer-offline-problem" on my
Windows Server 2008 R2 Standard, Service Pack 1 . I found this thread on the internet and probably tried out everthing mentioned here. But nothing helped in my case. When I deleted and recreated this printer, it was in status Ready and was working as
long there was no restart of the print spooler service. Then it switched to offline and stopped working.
So I did open a support case at Microsoft as recommended by you.
It didn't help to install the latest hot fixes or to delete third party language monitors from the registry. What did help, I found out two weeks ago and I want to share it here for other people having the same problem.
1. Delete the "Offline"-printer and its port.
2. Search the Registry for the printer name. You might find these keys:
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Hardware Profiles\0001\System\CurrentControlSet\Control\Print\Printers\***problemprinter***]
"PrinterOnLine"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Hardware Profiles\Current\System\CurrentControlSet\Control\Print\Printers\***problemprinter***]"PrinterOnLine"=dword:00000000
3. Recreate this printer - done!
4. Test it by restarting the print spooler service - if you like.
If you cannot delete the printer, because you don't want to lose the print jobs in the queue, try to find the above mentioned registry keys and delete them. Then restart the print spooler service. The printer will
switch to Ready and start printing.
Microsoft then confirmed they have comparable cases like this in their database, but no information why there are these registry keys and why they arouse this problem.

SharePoint 2013 Community Site Issue : Discussion Post auto reply

Hi,
We have SharePoint 2013 Community Site which is used by team for disccusions. Recently we have faced a critical issue, the discussion board all posts have been auto replied and the auto replies contains previous commments of users.
Kindly suggest since we are unable to track the cause of the issue.
Regards,

Is there any customization done in that community site? Check the log files for any more information at that specific time.
--Cheers

ADS ISSUE-- /adssap directory empty!

Hi Experts,
I got an issue with my Webdynpro applications when I´m using Adobe Document Services, the log file shows that there´s no /usr/sap/SID/JC00/j2ee/os_libs/adssap/XMLFormService/bin/XMLForm.exe
/adssap directory and its subfolders are empty, How can i fill them?
Regards

Hi
The ADS was not compatible with my Hardware.
Regards

EJB Issue with return empty children in join fetch query

I'm a newbie and still trying to learn all of the facets of EJB 3.0 (and other backend capabilities) however could not find this issue anywhere resolved.
I have a recursive table which has a 0,1-n relationship with itself. In this case, I want to query for all objects and fetch the resulting children.
To do this I have written the following query:
select o from Node o inner join fetch o.childrenNodeList order by o.nodeorder
If my database has the following entries:
Parent
Child
Grandchild
The above query will get all 3 and allow me to access the list of children through getChildrenNodeList, however, for Grandchild this returns "An attempt was made to traverse a relationship using indirection that had a null Session...." for Parent and Child however it works like it should and gets the fetched rows.
Is there a way for me to either:
1. Modify the query so that the getChildrenNodeList will return a 0 sized array (so I can test for no children)
2. Modify the getter such that I can check that the parent really has no children and not some issue with the query
Thanks for any help,
Kris

fixed

SNMP issues with RV082

Does anyone else poll this router with SNMP?
We are using firmware version: 2.0.0.19-tz
We are having problems with the traffic counters, some of them appear to be implemented as 16 bit counter instead of 32 bit counters. The reason this is causing problems is that they roll over (at 65,000) to 0 in less than our minute polling cycle, really skewing our metrics.
The counter for the Lan (interface 2) seems to be functioning properly, however interfaces 3 and 4 (WAN and DMZ / WAN2) rollover at 65000.
Tue May 11 08:38:31 EDT 2010
IF-MIB::ifInOctets.1 = Counter32: 137634
IF-MIB::ifInOctets.2 = Counter32: 1865677943
IF-MIB::ifInOctets.3 = Counter32: 12450
IF-MIB::ifInOctets.4 = Counter32: 49354
Look at counter IF-MIB::ifInOctets.4 5 seconds later:
Tue May 11 08:38:36 EDT 2010
IF-MIB::ifInOctets.1 = Counter32: 137634
IF-MIB::ifInOctets.2 = Counter32: 1865836207
IF-MIB::ifInOctets.3 = Counter32: 13167
IF-MIB::ifInOctets.4 = Counter32: 12900
Any suggestions?
Thanks!

Looks like a bug.
I'm using the same firmware, and the bug can be seen with one reading:
$ snmpwalk -v 2c -c public 192.168.20.253
IF-MIB::ifDescr.2 = STRING: ixp0
IF-MIB::ifDescr.3 = STRING: ixp1
IF-MIB::ifDescr.4 = STRING: ixp2
IF-MIB::ifInOctets.2 = Counter32: 2882720251
IF-MIB::ifInOctets.3 = Counter32: 59554
IF-MIB::ifInOctets.4 = Counter32: 31339
IF-MIB::ifInUcastPkts.2 = Counter32: 114769131
IF-MIB::ifInUcastPkts.3 = Counter32: 4291658323
IF-MIB::ifInUcastPkts.4 = Counter32: 4292343584
The unicast packet counters seem correct, the LAN counters (both byte and packet) seem correct, but the WAN (both WAN1 & WAN2) byte counts are flawed, i.e. no relation to the packet counters.

Issue after Configuring the oc4j_soa to OID

Hi All,
I just tried to configure the oc4j_soa OC4J instance of SOA suite to use Oracle Internet Directory. as a part of this process, after selecting orbpel and hw_services applications, we tried to restart the oc4j_soa OC4J instance however got the error: OPMN could not start all the processes...we Stoped and Started the SOA suite.
When I tried to stop the ascontrol of home and started the ascontrol of oc4j_soa from the back end by updating the server.xml file of corresponding oc4j instances.
unable to start the Application server Control i.e. not even getting the SSO login page..why?
Thanks
Krrish

Hi Krrish
You may want to post on the SOA/BPEL forum - BPEL
Check the server logs under $ORACLE_HOME/opmn/logs to see if they reveal the cause of the issue.
cheers
Matt.

SNMP OID query

Not sure if this is the right forum for this.....
Doing a bit of work using SNMP for various things - need to know if there is a way to delete the VLAN.DAT file using SNMP - and if so what is the OID I need to use.
Thanks

You can use the CISCO-FLASH-MIB for this. You would set the following objects:
ciscoFlashMiscOpEntryStatus : 5ciscoFlashMiscOpDestinationName : "flash:vlan.dat"ciscoFlashMiscOpCommand : 3ciscoFlashMiscOpEntryStatus : 1
The file should then be deleted.

Issues with SNMP

Hello everyone
I enabled SNMP on my 2 APs to check the bandwidth usage, it works only for a moment, i mean .. SNMP is still enabled, but i don t know why when i check the OID, in a command line it s like it doens t exist anymore ..
Then i disable ==> save ==> enable SNMP in the configuration panel, it works again until it drops again ..
Anyone had the same problem ??
Have a nice day !

Usually, it works 1 hour, then it stops, SNMP is still active, but interfaces related OIDs seems to disappear ..

Empty file in sender comm channel

i have issue with the empty files coming from the sender which are getting processed and getting saved in given file location.
Now the problem is,these files donot contain data and rather just gets outputted with header and trailer with some dummy data usually spaces,some zeros,-- like this...,this makes the file size of some 444 bytes or 834 bytes but as it is not having any data,we need to goto SXMB_MONI everyday,check for files,if its empty,needs to cancel them manually because it appears in red flag.
To avoid this,i was thinking of setting the empty file option in processing of communication channel to SKIp messages or delete messages.
Am i right in this approach?
From other thread:
"Currently when a process fails in PI due to an empty file the process needs to be manually set to u201Ccancelledu201D,where to locate in PI,what could be the problem and how it is to be solved.i have asked a similar question and hope that this error will help."
please reply and show me right way of resolving this.
thanks!
cheers!
Edited by: Prateek Raj Srivastava on Aug 19, 2010 10:54 AM

Hi,
As per ur req, its nt possible in this way.
The empty file handling means the whole file is empty, the size is 0k.
So in ur req, empty file means Header and Trailer present, but no data Records.
we can achive this in following ways also,
1.write an adapter module, to check if at all there is atleast there is 1 Data record, if not throw exception there itself.
2.In the mapping check if at all there is any Data Record. If no Data Records raise exception and also the Alerts.
Babu

ACE Module SNMP limits

I am monitoring an ACE module using snmp. The values returned from certain OIDs are graphed using Cacti. I found the 64 bit counters on interfaces for the ACE wrap at 10,000,000,000 instead of 2^64. Now that I have configured cacti to expect the wrap at 10 billion, I am concerned about the 32 bit counters. I am querying this snmp oid to get L7 connection counter
cslbxStatsL7PolicyConns
1.3.6.1.4.1.9.9.254.1.1.1.1.8
Should I expect this counter to wrap at 2^32 or a lower value?

The maximum value for a 32bit OID should be 4294967296, I do have a value in my lab that is above 1 billion for that counter, so I wouldn't think there is an issue immediately. One common issue - when you clear stats manually, the counter will reset to 0. As well, I found an internal bug that that suggested some pocket case within the code could have cleared stats incorrectly, but it has never been seen since. There is a guess that someone logged into the test bed and cleared it without permission, but it was not able to be verified. Hence the bug was created to investigate the code, turned up nothing, and was junked accordingly.
What you might want to do is keep a sharp eye on the counter. When it looks like it rolls, login to the context you are polling and take a look at the accounting log. If you find that someone cleared the logging, that answers the question. If not - log a TAC case and we can replicate your exact configuration/code version in our lab to see if there what the deviation is that causes it to clear. A bug would be logged and fixed.
Regards,
Chris Higgins

Snmp issue on ASA5510, empty reply on oid .1.3.6.1.2.1.31.1.1.1.18

Similar Messages

Maybe you are looking for