SNMP MIB file for Grid Control

Looking for the MIB file for traps coming out of Grid Control 10gR2. It looks like they're under enterprises.111.15 in the traps I've seen.

check in AGENT_HOME/network/doc

Similar Messages

Need SNMP MIB files For Cisco SF 300-48 48-Port 10/100 Managed Switch

Hi All,
I need SNMP MIB files for Cisco SF 300-48 48-Port 10/100 Managed Switch.
I have gone through cisco site but not able to get it.
Can anyone please provide me.I have stuck with this.
Thanks
Ram

Hi Ram, yes the MIB can be used. The switches are essentially the same in many regards (especially on a software level).
I do not know the OID for bandwidth. If you're looking for a particular OID may be this tool helps you
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=dot1dTpPortTable&translate=Translate&submitValue=SUBMIT&submitClicked=true
-Tom
Please mark answered for helpful posts

Where are configure files for Grid Control components?

I installed Grid Control 11g on Redhat 5.2, the repository database is Oracle 11.2.0.2 on the same box. It worked after installation, but after some weeks, I restart oms and got error [oracle@cchbi bin]$ ./emctl start oms
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server is not functioning because of the following reason:
Connection to the repository failed. Verify that the repository connection information provided is correct.Tried to google and search the forum, the message is not very selective and got few relevant resut.
Hope your exterts can point me to the configure file where I can verify the connetion to repository. Alos some one would share with me the knowledge on the following topics
1) What are the processes/components of Grid Control ? I am aware of oms, opmn, and a process run as /u01/app/midware/oms11g/ccr/bin/nmz -cron –silent. ANy others? What are their functions?
2) Location of configure files, log files and binary executables of this processes/components.
Many thnaks.

Hi,
to check if the OMS is running properly execute the command "emctl status oms" ($OMS_HOME/bin).
The result should be "Oracle Management Server is up".
To check which components are currently running execute the command "opmnctl status" ($OMS_HOME/opmn/bin).
The result should be something like:
Processes in Instance: EnterpriseManager0.<host
-----------------------------------------------------------+---------
ias-component | process-type | pid | status
-----------------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
HTTP_Server | HTTP_Server | 26470 | Alive
dcm-daemon | dcm-daemon | 26301 | Alive
OC4J | home | 1953 | Alive
OC4J | OC4J_EMPROV | 1954 | Alive
OC4J | OC4J_EM | 26523 | Alive
WebCache | WebCache | 27085 | Alive
WebCache | WebCacheAdmin | 27086 | Alive
Executing this command will answer your question whioch components need/should be up when using OEM/GC.
You will find some logfiles of the OMS under $OMS_HOME/sysman/log (e.g. emoms.trc, emoms.log). Please check logfile OC4J~OC4J_EM~default_island~1 under $OMS_HOME/opmn/logs as well...
To start the OMS you might try the command "opmnctl startall"...
HTH

SNMP MIB file download needed for Laserjet 5550 and 1505n. Paper out, Paper jam etc.

Please assist me. I need MIB files for SNMP messages like paper out, paper jam, etc. The printers are LaserJet 5550 and 1505n. HP rules.
This question was solved.
View Solution.

Thank you for the help. I found out in a different manner but here it is:
On the rightmost side you can see the adress and in the middle the data type and name. They are all at position 0.
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperJam,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.9
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.8
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PeripheralError,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.6
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_ConnectionTerminationAck,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.5
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NewMode,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.4
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_InterventionState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.3
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_AtBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.24
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TcpBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.23
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LlcBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.22
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NovBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.21
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Reserved,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.20
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.2
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOutput,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.19
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Printing,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.18
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_DoorOpen,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.17
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Initialize,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.16
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Wait,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.15
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Busy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.14
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_IoActive,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.13
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_MemoryOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.12
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PagePunt,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.11
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TonerLow,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.10
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LineState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.1
I hope it's useful for someone also.
Best regards to all forum users!
Cristian

6140 MIB File for SNMP/6140 Monitoring

Hi,
i�m looking for a MIB file for 6140 Disk Array. I found only 3510 MIB file, but nothing related to 6140.
The target of my actual task is setting up monitoring on a 6140 Array from a customer. We are using Big Sister Monitoring Software.
3510 monitoring was no problem due to the fact that it was easily getting some status infos via Command Line Tool, this has changed since 6140 is using a new kind of management application, which doesn�t seems to give useable output directly (regarding to a colleague) and requires login.
Any Suggestions e.g. other ways than snmp for monitoring? Status-Sites from the web-frontend?
Thanks in advance!
I

Hi,
I have the same problem : finding the 6140's mib to identify traps.
I guess that SUN-SAM-MIB.mib may be the good one, but I'm not sure.
to get it, I have downloaded StorageTek SAM-FS 4.6 and searched for mibs inside.
could someone confirm I found the good mib
thanks
thomas

Trying to find MIB file for 4506

Hi,
I am trying to find the MIB files for a cat 4506, after the CPU utiliazation for MRTG.
Any help appreciated.
Chris.

Hi Chris,
MIB file for CPU utilization is CISCO-PROCESS-MIB. YOu can use the MIB locator for better results. Hope that helps
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-PROCESS-MIB
CISCO MIB locator : http://tools.cisco.com/ITDIT/MIBS/MainServlet?IMAGE_NAME=4500
Regards,
Sathvik K V

Urgent-- Do we have 10.2.0.2 s/w for grid control on solairs environment

Hi,
Do we have 10.2.0.2 software for grid control management server on a sun solaris sparc environment? I see we have one for agent but we are not seeing anything w.r.t to OMS ?
Your help is appreciated!
Sravanthi.

The error we are getting is (from .err file ) :
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:243)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4494)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4443)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

A possible bug for Grid control?

Hi, Dear all,
We installed Grid control 10.2.0.1 on Redhat Linux R3 with existing database(10.2.0.4).
During the installation, we succeeded for repository creating but failed at OMS Configuration.
When I start oms in cmd line, I got the following error: the repository database can not be connected.
The description for the environment:
1. OMS server and repository database are installed on the same server, on which HA is used.
2. There are two floating IP on this machine,
IP | server name | used for |
xx.xx.xx.124 | cnsz030318 | oms server |
xx.xx.xx.80 | oem.db.paci.com.cn | repository database |
3.When we installed the oms with OUI, the repository server we input is oem.db.paci.com.cn
The problem we found:
During the installation, the repository was created successfully. But it failed at OMS configuration.
The error we got: the repository database can not be connected.
there are two lines in emoms.properities which seems strange:
oracle.sysman.eml.mntr.emdRepServer=oem.db.paic.com.cn
oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=cnsz030318.db.paic.com.cn)(PORT\=1535)))(CONNECT_DATA\=(SID\=oem10g)))
The emdRepServer is what we have input on OUI:oem.db.paic.com.cn. But for the connectDescriptor, it is changed to "cnsz030318.db.paic.com.cn", which does not exist at all!.
Now, we have worked around this problem by adding "cnsz030318.db.paic.com.cn" in the /etc/hosts.
But my question is, why the connectDescriptor set the HOST\ as cnsz030318.db.paic.com.cn? Why does it not use the name we input in OUI (oem.db.paic.com.cn)?
Maybe it is a bug for Grid control?

Did you install with "Use existing database" or "Use new database"?
I recommend that you use fully qualified domain names only!
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 7, 2009 2:24 PM

Database limits for Grid control repository?

Document "Oracle® Database Licensing Information / 10g Release 2 (10.2)" [Part Number B14199-10] discusses the restricted use license of database for grid control repository and rman repository use.
nfrastructure Repository Databases A separate Oracle Database can be installed and used as a Recovery Manager (RMAN) repository without additional license requirements, provided that all the Oracle databases managed in this repository are correctly licensed. This repository database may also be used for the Oracle Enterprise Grid Control repository. It may not be used or deployed for other uses.
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
There is no discussion of licensing requirements for options of the database (RAC, partitioning, etc) when the database stays within these repository use restrictions. Therefore it is unclear whether the Grid Control can be configured to provide appropriate monitoring without additional licenses.

This is the reply I received from release
management:
If they have deployed an EE edition of the database
as an OEM repository, and then want to protect that
with RAC or Data Guard, or make more Secure with ASO
or Database Vault, or indeed get any of the
additional benefits any of the options provide, then
they will need to license the option.
Let me know if that is still not clear, and I'll go
back again.Thanks.
There is a minor inconsistency in their response ... they say "if deployed on EE". However, as far as I know OEM repository required VPD, which is available only on Enterprise Edition (see http://download-east.oracle.com/docs/cd/B16240_01/doc/em.102/e10953/pre-installation_req.htm#CHDGIEAD)
However, it is quite clear that 'they' are telling us that the RAC option is not inherent in the "Special Use Licensing" as described http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#CJAHFHBJ .
The implication (not necessarily a topic for this forum) is that the OEM is not guaranteed to be able to provide basic monitoring and reporting functionality without additional license fees to make OEM more highly available than the targets being monitored.
It would be nice to have the information about which Oracle products (database and app server) have included licenses with a basic Grid Control install and which require additional licenses as part of Chapter 1 of http://download.oracle.com/docs/cd/B19306_01/license.102/b40010/toc.htm (That document goes into excruciating detail about the extra packs, but ignores the basics.)
For that matter, since OEM Grid Control can not be purchased, it would be nice to have a list of products that provide license to install Grid Control, again in Chapter 1 of the Grid Control Licensing document listed above.
I appreciate your time in having dug into this.

Problem Load Balancing connections for Grid Control Console on port 80!

I have two OMS and I'm balancing connections for Grid Control Console using a Software Load Balancer according with "Oracle Enterprise Manager Advanced Configuration". I have success where the load balancer is listening on port different to 80. When I configure Load Balancer to listen on port 80(architecture requirement) and distribute load between the two OMS(Port 7779), when login to Enterprise Manager Console the URL on the web browser changes to the port configured for HTTP server (port 7780) wich produces an "unable to connect" error message; and this behaviour also happends in some of the internal links of Grid Control Console too. Any ideas?
Thanks in advance!
Message was edited by:
user463224

I got it working, changing the "Port" directive to 80 on httpd.conf on HTTP Server

What is Hardware/O.S. Recommendations for Grid Control server

I understand both Linux and Window servers are supported for Grid Control Installation.
However, since we are running Exadata database and cells, what would be your recommendation when we choose which O.S. we should run G.C. on?
Since the entire Exadata environment is running Linux, so, personally I'd prefer to use Linux server. But, what is your preference, and please detail your reasons.
Thank you!
Edited by: 943714 on Jul 12, 2012 9:37 AM

Grid Control (OEMGC 11g) for Windows is only available (certified) for 32 bit Windows. So you can run into memory limitations, dependeing on the number of agents/targets you will be monitoring. Second you have to install Cygwin on your Windows server if you want (or need) to be able to SSH to a Linux/Unix server. Installing Cygwin is very problematic to say the least.
If you would use OEMCC (12c), and I don't know why you wouldn't, you can install the 64 bit version for Windows however you still have to install Cygwin.
So in your case I would go for the Linux version.
Eric

Need to take MIB File for Call Manager

Hi,
Can anyone help me how to take MIB file for Call Manager. We have a cluster of 6 CUCM servers (1 pub + 5 Sub). we need this MIB file for monitoring purpose. If you need anyother information regarding this please let me know.

Hi
Below MIBs are supported in CUCM. Refer the link attached for details. Btw which Version are you running ?
•CISCO-CCM-MIB
•CISCO-CCM-CAPABILITY
•CISCO-CDP-MIB
•CISCO-SYSLOG-MIB
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/managed_services/cisco_mibs.html
Thanks.

Atempt to start OMS for Grid Control 11g fails with - Unexpected error occu

Hello,
I am running Grid Control 11g.
Repository DB is 11.2.0.1
Both the Grid Control and DB server are running in same machine - redhat 5.
When trying to start the oms, this fails with the below error:
Oracle Enterprise Manager 11g Release 1 Grid Control
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Starting WebTier...
WebTier Successfully Started
Starting Oracle Management Server...
Oracle Management Server is not functioning because of the following reason:
Unexpected error occurred. Check error and log files.
The emctl.log shows the following error which I am unable to debug:
2011-09-13 11:20:05,619 [main] DEBUG oms.StatusOMSCmd processStatusOMS.138 - HTTP port in emgc property file: 7202
2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.139 - HTTPS port in emgc property file: 7301
2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.155 - Using http port.
2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.195 - Attempting to connect to http://<host>.<domain>:7202/em/console/logon/logon
2011-09-13 11:23:05,596 [main] ERROR oms.StatusOMSCmd processStatusOMS.239 - Read timed out
java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at HTTPClient.BufferedInputStream.fillBuff(BufferedInputStream.java:206)
at HTTPClient.BufferedInputStream.read(BufferedInputStream.java:126)
at HTTPClient.StreamDemultiplexor.read(StreamDemultiplexor.java:348)
at HTTPClient.RespInputStream.read(RespInputStream.java:147)
at HTTPClient.RespInputStream.read(RespInputStream.java:108)
at HTTPClient.Response.readResponseHeaders(Response.java:1107)
at HTTPClient.Response.getHeaders(Response.java:832)
at HTTPClient.Response.getStatusCode(Response.java:331)
at HTTPClient.RetryModule.responsePhase1Handler(RetryModule.java:92)
at HTTPClient.HTTPResponse.handleResponseImpl(HTTPResponse.java:872)
at HTTPClient.HTTPResponse.access$000(HTTPResponse.java:62)
at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:839)
at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:837)
at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:666)
at HTTPClient.HTTPResponse.handleResponse(HTTPResponse.java:837)
at HTTPClient.HTTPResponse.getStatusCode(HTTPResponse.java:242)
at oracle.sysman.emctl.oms.StatusOMSCmd.processStatusOMS(StatusOMSCmd.java:199)
at oracle.sysman.emctl.wls.OMSController.statusOMS(OMSController.java:867)
at oracle.sysman.emctl.wls.OMSController.startOMS(OMSController.java:606)
at oracle.sysman.emctl.wls.OMSController.main(OMSController.java:213)
2011-09-13 11:23:05,597 [main] INFO wls.OMSController statusOMS.950 - statusOMS finished with result: 9
In emgc.properties, I have MSPORT=7202.
I have used the notes in Metalink 1287904.1, but without resolution.
I am able to connect with sqlplus, with user sysman, without issues. There are no invalid objects under sysman.
emoms.trc shows the following:
2011-09-11 15:51:53,160 [JobWorker 22356:Thread-108] WARN jdbc.ConnectionCache _getConnection.353 - Invalid or Stale Connection found in the Connection Cache
java.sql.SQLException: Invalid or Stale Connection found in the Connection Cache
Thank you for support.
Regards,
Horia
Edited by: horia.berca on Sep 13, 2011 5:29 AM
Edited by: horia.berca on Sep 13, 2011 5:32 AM
Edited by: horia.berca on Sep 13, 2011 5:35 AM
Edited by: horia.berca on Sep 13, 2011 5:45 AM

Hello again;
Check the solution in this: ( and note the multiple versions of oracle it covers )
UNABLE TO FIND GRID INFRASTRUCTURE LISTENER (Doc ID 1483234.1)
Best Regards
mseberg

Where are udump,cdump,bdump trace files in grid control?

Hi
All
I want to show all the trace file those are in bdump,udump and cdump.
Where can I find those file or information in Grid control?
Thanks,
Vishal
Message was edited by:
vishal patel
Message was edited by:
vishal patel

They aren't. You may see references to trace files in the alert log pages .. for instance when you get an ORA-xxxxx alert it will show the name of the trace file that pertains to it.

Change hostname for Grid Control

Hi All,
I have installed OEM grid control 10gr2(10.2.0) on solaris. The installation was successfull.
the grid control login page appeared to be as
http://localhost:4889/em
I do not understand why grid control installation has picked up the localhost and local ip address 127.0.0.1 instead of using the server hostname and server ipaddress
Lets say i have following entries in /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.4.51 abc.xyz.com abc
how to change the GRID url to http://abc.xyz.com:4889/em?
thanks all in advance.

Thanks for the reply
The files are there,
$OMS_HOME/sysman/config/emoms.properties
And $AGENT_HOME/sysman/config/emd.properties
bash-3.00$ emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.1.0
OMS Version : 10.2.0.1.0
Protocol Version : 10.2.0.0.0
Agent Home : /u01/app/OracleHomes/agent10g
Agent binaries : /u01/app/OracleHomes/agent10g
Agent Process ID : 9997
Parent Process ID : 9988
Agent URL : https://localhost:3872/emd/main/
Repository URL : https://localhost:1159/em/upload
Started at : 2010-04-09 10:24:50
Started by user : oracle
Last Reload : 2010-04-09 10:36:08
Last successful upload : 2010-04-09 12:15:37
Total Megabytes of XML files uploaded so far : 22.36
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 35.24%
Last successful heartbeat to OMS : 2010-04-09 12:17:07
Agent is Running and Ready

SNMP MIB file for Grid Control

Similar Messages

Maybe you are looking for