SNMP MIBs for Monitoring IM&P
I would like to monitor CPU and memory for IM&P version 10.5.2 on four separate clusters but I'm unable to find any documentation on which MIBs should be used. Can anyone point me in the right direction?
Hi Ruben,
Please check the following link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/9_1_1/admin/CUCM_BK_CE552AF7_00_cisco-unified-serviceability-administration-91/CUCM_BK_CE552AF7_00_cisco-unified-serviceability-administration-91_chapter_01100.html#CUP0_RF_SC67F734_00
HTH
Manish
Similar Messages
-
SNMP MIB for Solstice DiskSuite 4.2
Hi all,
Does anybody know where I can get the SNMP MIB for Solstice DiskSuite 4.2 ?
Any help will be appreciated,
Thanks,
SimonYes, but some versions of VxVM require a 'rootdg' remain. You may or may not prefer to simply use VxVM to mirror root.
The packages are on disk2 of the installation media in the EA folder.
Darren -
Dear All,
I would like to monitor the VPN3000 performance through HP Open View. I could find the MIB for CPU utilization, but couldn`t find the MIB for Memory usage. Already browsed the MIB Locator on CCO but couldn`t find anything. Does VPN3000 not have a MIB for Memory usage ?? I thought monitoring the memory usage is a common task.
Would be appreciate for any information.
Best Regards,
EngelThanks for the link. But I meant that I already loaded all the VPN3K MIBS to the HP OpenView. And from the HP`s MIB Browser I couldn`t find one for monitoring VPN3K`s memory usage.
-
Hello,
we have a N5k platform experiencing bug:CSCtn71292. Customer wants to monitor below log message, using NNMi.
%SYSMGR-2-VOLATILE_DB_FULL: System volatile database usage is unexpectedly high at 88%.
To do that it would need a SNMP MIB. Can anyone please let me know how this can be achieved? Or is there any MIB which I should use?
Many Thanks,
GirishHello,
The SNMP manager is using an incorrect community password to query the SNMP agent that on your Catalyst 6509.
I can see that multiple managers fail to authenticate with your switch. Please check your configuration to see if the password is consistent with your NMS configuration.
#show running-config | include snmp-server
HTH
--Leon
* Please rate posts. -
SNMP MIBS for 4240 version 5.0
Does anyone know where I can find the MIBS for the traps sent for each alert in IDS Version 5.0
I have looked all over the ftp and web on the cisco site and cannot find them.
Thanks,Hi,
The process to get the CISCO-CIDS-MIB published on CCO is already on and hope you will find it very soon. Meanwhile I am enclosing the MIB here which you can refer to. The other mibs supported are CISCO-PROCESS-MIB, CISCO-ENHANCED-MEMPOOL-MIB and CISCO-ENTITY-ALARM-MIB which you can get from CCO. -
Snmp mibs for solaris 9 sparc edition - cannot be found anywhere
i am looking for the mibs to download for solaris 9 sparc, but they are nowhere to be found on sun's site. can anyone point me in the right direction of where they can be obtained?
any other information regarding sun and snmp is appreciated as well.Here is where you find them:
http://www.sun.com/download/products.xml?id=454bc019 -
SNMP MIBs for 'show ip route profile'
Hello,
Could someone please point me to the relevant OIDs to use to get the summary output via SNMP alike what we obtain from 'show ip route profile'?
Thanks.Hi ,
The OID is the ipRouteTable (1.3.6.1.2.1.4.21). This OID is included in the
RFC1213-MIB and it has an entry for each route to a particular destination.
I hope this will help !!
Thanks--
Afroj
If this post answers your question, please click the "Correct Answer" button" -
Xserve SNMP-MIBs for Vital Hardware Stats
Hello,
I'm trying to get "vital hardware informations" (CPU Usage, CPU temperature, Memory, ...) "à-la-ServerMonitor" with SNMP.
I use http://www.netmrg.net/ (very nice package of MRTG monitoring) and I need strings line 1.3.6.1.4.1.9.5.1.1.8.0
I have downloaded CocoaSNMP (GUI mib browser) But I 'am lost in the trees
I googled a lot ... no result ...
Any hellp will be greatly appreciatedThere is a MIB. There is next to no information available on it, though.
See this write-up:
http://www.cuddletech.com/blog/pivot/entry.php?id=189
You can turn on SNMP in RAID admin and then snmp walk it if you want -- all you can really get though is the RAID name and the contact name. -
Native SNMP MIB for DMP 4400G?
Hi. I've read a marketing page that states that the 4400G has "SNMP support". I know that DMM/DMS has SNMP, but can't seem to find a SNMP settings page on the actual DMP. Am I missing something obvious? I fould like to directly monitor my DMPs in Solarwinds NPM.
tia, -Daveyes.
Doesn't matter what language the router's SNMP manager was created in. All you need to do is send UDP packets in the proper format to the router, and extract the information.
I don't know why you're doing this though. You should search the web: there are TONS of companies willing to sell you JAVA/SNMP libraries which do most of the work for you. This way, you can concentrate more on your manager application instead of how to handle and decipher UDP datagram packets.
Hope it helps -
Looking for SNMP MIBs for RV routers
Everything is in the title.
I dug into Cisco's MIB ressources. Found a lot of MIBs but none corresponding to the RV routers.
Did anyone here have other source of information ?Hello,
All the RV Router's support SNMP v1,2 and newer ones support v3. CNA and Prime Infrastructure will work.
There is also a browser plugin called FindIT. This is a free tool that will discover any SMB devices on the network providing IP addresses, MAC addresses, Versions, and allows you to manage each devices.
http://www.cisco.com/c/en/us/products/cloud-systems-management/small-business-findit-network-discovery-utility/index.html
I hope this helps.
Regards,
Chris -
Configure CBQoS for monitoring.
Hi, i want to configure CBQoS in a lot of 2960 switches (with snmp v1) for monitoring: jitter, delay and packets lost with PRTG software.
I not found documentation for understand CBQoS, but i see this doc:
http://www.cisco.com/en/US/docs/ios/ios_xe/qos/configuration/guide/cbqos_mib_xe.html
and when i put these commands:
1. enable
2. configure terminal
3. snmp-server ifindex persist
4. snmp mib persist [cbqos | v3mibs]
5. end
6. write mib-data
I can't do the step 4
Switch(config)#snmp mib ?
community-map Community Mapping as per RFC-2576
notification-log Configure the Notification Log MIB
rep Enable SNMP Resilient Ethernet Protocol options
target target extention CLI from SNMP
PS: Or maybe is a simplest way to monitor QoS.
Thanks!I realy sorry, i didn't realise for the IOS version. I'm replying myself:
Upgrade IOS:
c2960-lanbasek9-mz.122-55.SE8
to
c2960-lanbasek9-mz.150-2.SE4
Switch(config)#snmp mib ?
community-map Community Mapping as per RFC-2576
notification-log Configure the Notification Log MIB
persist Persistence for MIBS
target target extention CLI from SNMP
Now, i wiil try to get work CBQoS.
Thanks -
I am new to NETAPP at our organisation, our team is taking over them from another team with the arival of 2 FAS8020's on Netapp 8.3
So far no major issues except that I am trying to find up to date SNMP Mibs for our Monitoring System.
I found this link
http://mysupport.netapp.com/NOW/download/tools/mib/
But the files seem to be garbage once unpacked and don't look like a MIB file.
I see lots of reference to the mibs being in "/etc/mibs" which would be fine if the CLI looked like a *Nix shell but it does not.
Cheers
RobHi, In Clustered Data ONTAP environment, go to nodeshell to see the MIB versionFrom advanced mode in node shellNode01*> ls /etc/mib
netapp.mib
traps.dat Alternatively you can access the MIBhttps://cluster_mgmt_ip/spi The MIB download looks fine for me, are you getting an error while extracting? Thanks -
Please provide mibs for CGNE-c29tor001 and CGNE-c55tor001 switches
We require SNMP mibs for the following hardware.
CGNE-c29tor001
CGNE-c55tor001
Can you please provide us ?Usually the MIBs are as per the supported IOS or Software running on the device. You can check the software running on the device using show version and check the supporting MIBs on those softwares here :
http://tools.cisco.com/ITDIT/MIBS/MainServlet?ReleaseSel=0&PlatformSel=0&fsSel=0
-Thanks
Vinod
**Encourage Contributors. RATE Them** -
after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?
Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh -
MIBS to Monitor Etherchannel and trunks via SNMP
I would like to monitor the status of etherchannel and trunk configurations in 6500 Catalyst switches running both CATOS and IOS. I would like to understand the specific mibs/OIDS that should be monitored for etherchannels and trunks. I am trying to get a better handle on tracking the etherchannels and trunk dynamically and then understanding when the ports are having issues (up/down and errors). I need to understand how to differentiate these type of ports from regular access ports.
Thanks,
TimHi Tim,
what exactly do you want to query via SNMP?
For an (PAgP) Etherchannel, the member-interfaces might be interesting:
https://supportforums.cisco.com/message/3957914#3957914
For a trunk, you could start with the operational mode, depending on the platform you can use:
vlanTrunkPortDynamicStatus (CISCO-VTP-MIB):
vlanTrunkPortDynamicStatus.49 = notTrunking
vlanTrunkPortDynamicStatus.50 = trunking
vlanPortIslOperStatus (CISCO-STACK-MIB):
vlanPortIslOperStatus.13.43 = notTrunking
vlanPortIslOperStatus.13.44 = trunking
Hope that helps
Rolf
Maybe you are looking for
-
Looking for option to view modified photos
After years of owning a Mac and organizing all of my photos manually, I decided to break away from using Adobe Bridge and import everything into iPhoto. I think iPhoto is easy to use and doesn't get in my way except for two things: 1. I'd like to be
-
i have already posted a question and you send a answer to my mail and them i am updated flash plater but is still showing an error in youtube but in other browsers those liks are working
-
User/library/preferences (junk?)
In my preference file I have found all kinds of strange folders: For example: »@ê}]Løˇ› †{·|ê}_|ê{˛0øˇ›pßá#0 or ¿ê}]Løˇfi Also, found files called "unix executable files" lots of them-- for example cf#rJfGd Are these junk? Can I trash them" Sugg
-
Experts, Is there a standard report/ or an easy way for me to get the list of all PR's released in an year - Basically I am looking for the following info: u2022 Requisition Number u2022 Date u2022 Amount u2022 Description u2022 R
-
How to transport a role in portal
All, I created a new role and I would like to transport it. Could anyone tell me which steps am I supposed to follow and which role am I supposed to have to create a transport in portal? Regards,