SNMP not responding

Hi,
I have a Windows 2003 R2 server with SNMP enabled.
I monitor it via Nagios, and have been working fine since a few days ago, that snmp started to not answering.
I've removed SNMP services, and reinstalled, clean registry entries, but unsuccedfully.
What I see strange is that when I type "netstat -an | find "161"" , I got:
UDP    0.0.0.0:161            *:*
UDP    x.x.x.x:161      *:* (where x.x.x.x is the IP address assinged to the network card).
The rest of servers only show:
UDP    0.0.0.0:161            *:*
I think this could be the cause, but don't know how to solve it.
There is no firewall.
Thanks,

this maybe helpful...
https://social.technet.microsoft.com/Forums/en-US/129f94e7-de20-4e4c-8a7e-cde13725478d/snmp-not-responding?forum=winservergen
Best,
Howtodo

Similar Messages

SNMP not responding on callmanager servers

Folks,
We have a callmanager cluster and we would like to manage the servers using snmp, when i run snmp walker, i get a response from few and no response from others? has anyone run into the same issue?

Hi there,
- is the SNMP service running on the servers?
- is the community name you are using correct?
- what kind of SNMP "walker" are you using?
szge

WLC is not responding to SNMP requests.

Customer is using a 4400 WLC.
He has a management tool that works using the SNMP logs from the controller, he can ping the
controller using this management tool, but when he sends SNMP requests from the management tool the
WLC doesn't reply.
The SNMP server IP address is 192.168.122.11 and the WLC's IP address is 10.20.1.31.
I have the following debug taken from the switchport where the WLC is connected.
'debug snmp agent' shows some interesting messages that confirms that the WLC is not sending a packet back.
Cisco Controller) >debug snmp agent enable
(Cisco Controller) >*SNMPTask: Feb 06 14:38:44.616: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
*SNMPTask: Feb 06 14:38:44.616: SNMPD: Failed to build in SnmpMessage.
1145 Debug Messages have been dropped*SNMPTask: Feb 06 14:38:44.616: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:47.621: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
*SNMPTask: Feb 06 14:38:47.621: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:47.621: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:50.652: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 59
*SNMPTask: Feb 06 14:38:50.652: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:50.652: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:53.684: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
*SNMPTask: Feb 06 14:38:53.684: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:53.684: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:56.715: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
*SNMPTask: Feb 06 14:38:56.715: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:56.715: SNMPD: *NOT* sending out packet, out_packet_len = 0
*SNMPTask: Feb 06 14:38:59.747: SNMPD: Packet from: 192.168.122.11:2509, in_packet_len = 50
*SNMPTask: Feb 06 14:38:59.747: SNMPD: Failed to build in SnmpMessage.
*SNMPTask: Feb 06 14:38:59.747: SNMPD: *NOT* sending out packet, out_packet_len = 0
I have also a packet capture taken from the same switchport, I attach it here.
What could be the reason for not responding?

You need to add the management tool in the WLC as a trap reciever.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

Alarms not appearing for events - Agent Not Responding

Hi
I'm hoping someone may be able to help with a frustrating issue.
I have a setup with SunMC 4.0 monitoring approx 15 SunMC agents. The problem is some of these agents are not displaying alarms for events that occur.
E.g. if I trigger an alarm on a host by say filling up a filesystem, on some hosts an alarm will appear in the Alarm tab as exepcted, but on other hosts no alarm appears and hence I cannot acknowledge the alarm.
After doing a bit of digging I have found the following:
1) When the event is triggered on the client the trap is sent to the server
2) The server then tries to communicate with the agent on the client and I see this error in the event.log
[012578fd 0086 ]info Jul 28 14:59:06 event eventmgr: sending snmp collection request to XXXX 1161 XXXX for startline 0...................................................................
[012578ff 0098 ]error Jul 28 14:59:06 event eventmgr: event collection failed for XXXX 1161 XXXX line 0 - error {} {Agent Not Responding}.................................................
3) If I snoop between the 2 servers I can see communication between the server and the client on port 1161 so dont believe it is a network issue
4) I have tried uninstalling and reinstalling the agent. This strangely cured it on one server with the problem, but on another server the problem persists even after reinstalling the agent multiple times
5) I have logged into the postgress database and can see that events are not being logged in the events table (hence not being displayed in the Sun MC console).
6) I have tried reseeding the agent and that makes no difference
7) I have ensured the agent is listening on one network interface by adding snmpBindAnyAddr = "0" to the agent section of the domain-config.x file
I am not sure where else to look for pointers as to what is going on. What beats me is that the servers which the agents are running on all have identical builds built from jumpstart and are on the same network, yet some work and some dont!
Any help from anyone greatly received...
thanks

Hi there,
I found a solution to get the alarmflow going again:
1. Delete the node from SunMC Java Console
2. Stop the agent
3. Remove all logfiles in /var/opt/SUNWsymon/log
4. Start the agent
5. Wait 2 minutes and add the node in SunMC Java Console
After these steps I can see alarms coming through and when adjusting thresholds I can trigger new alarms which show up on the Hostview Alarms tab.
Unfortunately, this only seems to be a temporary solution, at least for some nodes.
Anyway, I figured I'd share this info with everyone. Maybe it will help with your investigation and if someone finds a permanent solution please feel free to post it here ;-)
Best Regards,
Emerald

VSAN Isolation due to domain manager other side not responding

I am trying to configure VE port between Cisco nexus 7K and 5K switches but the vfc is not operational as VSAN isolation.
I have bind the VSAN 100 to VLAN 100 and add vfc into vsan database, but the VSAN 100 is still operational down
error msg shown: VSAN Isolation due to domain manager other side not responding?
StorageVDC# show vlan fcoe
Original VLAN ID        Translated VSAN ID      Association State
      100                       100              Operational
vsan 100 information
         name:VSAN0100 state:active
         interoperability mode:default
         loadbalancing:src-id/dst-id/oxid
         operational state:down <<<<
StorageVDC# show vlan
VLAN Name                             Status    Ports
1    default                          active    Eth2/5
100 VLAN0100                         active    Po401, Eth2/3, Eth2/4
StorageVDC# show int vfc-port-channel 401
vfc-po401 is trunking (Not all VSANs UP on the trunk)
    Bound interface is port-channel401
    Hardware is Ethernet
    Port WWN is xxxxx
    Admin port mode is E, trunk mode is on
    snmp link state traps are enabled
    Port mode is TE
    Port vsan is 100
    Speed is 20 Gbps
    Trunk vsans (admin allowed and active) (100)
    Trunk vsans (up)                       ()
    Trunk vsans (isolated)                 (100) <<<<<
    Trunk vsans (initializing)             ()
    608 fcoe in packets
    51072 fcoe in octets
    1762 fcoe out packets
    135612 fcoe out octets
    Interface last changed at Thu Jan 10 10:47:27 2013

Well, it wasn't a DNS issue, it was a routing issue that affected ISP customers in half of the country. https://community.shaw.ca/thread/9284?start=0&tstart=0
I can confirm that iTunes will now open and is functional. It seems that if the application can't access some internet resource immediately when it launches it will immediately lock up and never come back! No offline mode??!?!

RVS4000 remote management using SNMP not Supported over WAN

I'm trying to mange the RVS4000 router from the WAN side. I just changed the default password and in the firewall setting:
Block WAN Request is disabled.
Remote Management is enabled with the default port.
But I am not able to connect to the router remotely (using its WAN IP address). I can ping its WAN IP address fine from the remote PC. The router functions normally (i.e. PC on the LAN can connect to the Internet) but the remote management via SNMP also does not work. In most cases, the router just does not respond to the TCP SYNC or SNMP request from the WAN. Occassionally, it responds to the TCP SYNC fine but when the remote PC requests the HTTP page, it quickly responds with FIN/ACK.
In addition, I can connect to its WAN IP address from the LAN side. But it just does not work from the WAN side.
I tried disabling firewall, IPS, etc, nothing works.
Message was edited by: Steve DiStefano

Shoot, I just tried it myself. Didnt work. I contacted development team and they told me it wasnt speced to operate for SNMP management (port 161) over the WAN.
Remote Mgmt on RVS4000 is limited to WebUI access on RVS4000, and SNMP is only accessible from LAN side.
This product did not have any requirement to be accessed from Internet using SNMP.
Very sorry I didnt know this. Was there a datasheet or paper that indicated this was supported I can correct to prevent this frpom happening to others like us?
You know, I was thnking that the times I used SNMP on SB Routeres was when I was VPNed into the router, then it works, since it is supported on LANB side. is that an option for you?
Tell us about what typs of things you view walking SNMP from the NOC and we'lls ee if there are alternative ways for you to get the same data.
Steve
SE Field Channel Sales
Message was edited by: Steve DiStefano

Vlan interface will not respond to ping

cisco 2651xm router
IOS: c2600-ipbasek9-mz.124-9.T1.bin
I have two vlans configured on this router as follows:
interface Vlan1
ip address 172.16.1.30 255.255.0.0
ip nat inside
interface Vlan2
ip address 192.168.0.1 255.255.255.0
ip nat inside
from a pc on 172.16.1.x I can ping 172.16.1.30 and get a response.
But from a pc on 192.168.0.x if i ping 192.168.0.1 I get failure, and I've tried this on more than one pc. The 192.168.0.1 vlan will not respond. This is baffling and I can't work out why. Thanks if anyone can help.

thanks for your response:
#show run
Building configuration...
Current configuration : 7859 bytes
! Last configuration change at 16:56:37 gmt Tue Mar 3 2015
version 12.4
no service timestamps debug uptime
no service timestamps log uptime
no service password-encryption
hostname ipbase
boot-start-marker
boot system flash c2600-ipbasek9-mz.124-17.bin
boot-end-marker
no logging buffered
no logging console
enable secret 5 <secret>
enable password <password>
no aaa new-model
resource policy
clock timezone gmt 0
clock summer-time gmt date Mar 30 2011 0:00 Sep 30 2011 0:00
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
ip name-server 156.154.70.22
ip name-server 156.154.71.22
archive
log config
hidekeys
interface ATM0/0
mtu 1478
no ip address
ip tcp adjust-mss 1452
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
clock rate aal5 7000000
hold-queue 224 in
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface ATM0/0.1 point-to-point
ip tcp adjust-mss 1452
no snmp trap link-status
pvc 8/35
pppoe-client dial-pool-number 1
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet1/0
interface FastEthernet1/1
interface FastEthernet1/2e
interface FastEthernet1/3
interface FastEthernet1/4
interface FastEthernet1/5
interface FastEthernet1/6
interface FastEthernet1/7
interface FastEthernet1/8
interface FastEthernet1/9
interface FastEthernet1/10
interface FastEthernet1/11
interface FastEthernet1/12
description cable to 192.168.0.0
switchport access vlan 2
interface FastEthernet1/13
description cable to 192.168.0.0
switchport access vlan 2
interface FastEthernet1/14
interface FastEthernet1/15
interface Vlan1
ip address 172.16.1.30 255.255.0.0
ip nat inside
interface Vlan2
ip address 192.168.0.1 255.255.255.0
ip nat inside
interface Dialer0
bandwidth 6144
ip address negotiated previous
no ip redirects
no ip proxy-arp
ip nbar protocol-discovery
ip flow egress
ip nat outside
encapsulation ppp
dialer pool 1
dialer idle-timeout 0
dialer persistent
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname <username>
ppp chap password 0 <password>
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.8.0.0 255.255.255.0 172.16.1.43
ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static tcp 172.16.1.54 1194 interface Dialer0 1194
ip nat inside source static tcp 172.16.1.54 80 interface Dialer0 80
ip nat inside source static tcp 172.16.1.57 1937 interface Dialer0 1937
ip nat inside source static tcp 172.16.1.56 1936 interface Dialer0 1936
ip nat inside source static tcp 172.16.1.58 1938 interface Dialer0 1938
ip nat inside source static udp 172.16.1.43 514 interface Dialer0 514
ip nat inside source static udp 172.16.1.43 5060 interface Dialer0 5060
ip nat inside source static udp 172.16.1.43 10050 interface Dialer0 10050
ip nat inside source static udp 172.16.1.43 10049 interface Dialer0 10049
ip nat inside source static udp 172.16.1.43 10048 interface Dialer0 10048
ip nat inside source static udp 172.16.1.43 10047 interface Dialer0 10047
ip nat inside source static udp 172.16.1.43 10046 interface Dialer0 10046
ip nat inside source static udp 172.16.1.43 10045 interface Dialer0 10045
ip nat inside source static udp 172.16.1.43 10044 interface Dialer0 10044
ip nat inside source static udp 172.16.1.43 10043 interface Dialer0 10043
ip nat inside source static udp 172.16.1.43 10042 interface Dialer0 10042
ip nat inside source static udp 172.16.1.43 10041 interface Dialer0 10041
ip nat inside source static udp 172.16.1.43 10040 interface Dialer0 10040
ip nat inside source static udp 172.16.1.43 10039 interface Dialer0 10039
ip nat inside source static udp 172.16.1.43 10038 interface Dialer0 10038
ip nat inside source static udp 172.16.1.43 10037 interface Dialer0 10037
ip nat inside source static udp 172.16.1.43 10036 interface Dialer0 10036
ip nat inside source static udp 172.16.1.43 10035 interface Dialer0 10035
ip nat inside source static udp 172.16.1.43 10034 interface Dialer0 10034
ip nat inside source static udp 172.16.1.43 10033 interface Dialer0 10033
ip nat inside source static udp 172.16.1.43 10032 interface Dialer0 10032
ip nat inside source static udp 172.16.1.43 10031 interface Dialer0 10031
ip nat inside source static udp 172.16.1.43 10030 interface Dialer0 10030
ip nat inside source static udp 172.16.1.43 10029 interface Dialer0 10029
ip nat inside source static udp 172.16.1.43 10028 interface Dialer0 10028
ip nat inside source static udp 172.16.1.43 10027 interface Dialer0 10027
ip nat inside source static udp 172.16.1.43 10026 interface Dialer0 10026
ip nat inside source static udp 172.16.1.43 10025 interface Dialer0 10025
ip nat inside source static udp 172.16.1.43 10024 interface Dialer0 10024
ip nat inside source static udp 172.16.1.43 10023 interface Dialer0 10023
ip nat inside source static udp 172.16.1.43 10022 interface Dialer0 10022
ip nat inside source static udp 172.16.1.43 10021 interface Dialer0 10021
ip nat inside source static udp 172.16.1.43 10020 interface Dialer0 10020
ip nat inside source static udp 172.16.1.43 10019 interface Dialer0 10019
ip nat inside source static udp 172.16.1.43 10018 interface Dialer0 10018
ip nat inside source static udp 172.16.1.43 10017 interface Dialer0 10017
ip nat inside source static udp 172.16.1.43 10016 interface Dialer0 10016
ip nat inside source static udp 172.16.1.43 10015 interface Dialer0 10015
ip nat inside source static udp 172.16.1.43 10014 interface Dialer0 10014
ip nat inside source static udp 172.16.1.43 10013 interface Dialer0 10013
ip nat inside source static udp 172.16.1.43 10012 interface Dialer0 10012
ip nat inside source static udp 172.16.1.43 10011 interface Dialer0 10011
ip nat inside source static udp 172.16.1.43 10010 interface Dialer0 10010
ip nat inside source static udp 172.16.1.43 10009 interface Dialer0 10009
ip nat inside source static udp 172.16.1.43 10008 interface Dialer0 10008
ip nat inside source static udp 172.16.1.43 10007 interface Dialer0 10007
ip nat inside source static udp 172.16.1.43 10006 interface Dialer0 10006
ip nat inside source static udp 172.16.1.43 10005 interface Dialer0 10005
ip nat inside source static udp 172.16.1.43 10004 interface Dialer0 10004
ip nat inside source static udp 172.16.1.43 10003 interface Dialer0 10003
ip nat inside source static udp 172.16.1.43 10002 interface Dialer0 10002
ip nat inside source static udp 172.16.1.43 10001 interface Dialer0 10001
ip nat inside source static udp 172.16.1.43 10000 interface Dialer0 10000
ip nat inside source static tcp 172.16.1.43 25 interface Dialer0 25
ip nat inside source static tcp 172.16.1.250 1935 interface Dialer0 1935
logging trap debugging
logging facility local6
logging 172.16.1.43
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit 172.16.0.0 0.0.255.255
access-list 2 permit 172.16.0.0 0.0.255.255
access-list 10 permit 172.16.1.43
access-list 10 permit 172.16.1.13
access-list 10 deny any
dialer-list 1 protocol ip permit
snmp-server community public RO 10
control-plane
bridge 1 protocol ieee
line con 0
line aux 0
line vty 0 4
access-class 2 in
password <password>
login
ntp authenticate
ntp clock-period 17208300
ntp source Dialer0
ntp server 129.215.160.240
ntp server 78.129.239.26
ntp server 143.210.16.201
ntp server 82.219.4.31
end

I can't open firefox the running but not responding window opens and says to close the existing window. I can't do that shutting down the computer doesn't do anything to help. I've done all the suggestions here. I've uninstalled and reinstalled firefox

Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
== This happened ==
Every time Firefox opened
== The computer was hard shut down and did a improper shut down scan when it was restarted ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

Frequently when I open Firefox it says Firefox is already running but is not responding. I have to go to the task manager, find Firefox and close the process before I can get firefox to load.

Those are all the details I have

There is an article about this problem see:
* [[Firefox is already running but is not responding]]

PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.

Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments

IPod not recognized by iTunes. Also iPod seems disabled/locked showing "do not disconnect". Not responding to anything. Any help please.

My iPod is not being recognized by iTunes. iPod seems disabled and not responding to anything. Permanently on "do not disconnect". Not sure what to do.

Hello,
My iPod is not being recognized by iTunes or internet
explorer. It used to, but not anymore. It just
dosent show up when I connect it to my computer.
Also, the "do no disconnect" sign does not appear on
my iPod when I connect it. It is still able to
recharge, though.
have u tried a different usb port?
I read that I have to restore it. I have tons of
songs in my iPod that I do NOT want erased! How can
I back these songs up? I have some songs on my iPod
that are from another person's computer, so if they
get erased, the songs are gone forever.
try this http://www.copypod.net/
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

"Update server not responding" when trying to update Acrobat 9 Pro

I just installed Acrobat 9 Pro on my desktop computer and on my laptop. I was able to download and install the latest updates to the copy on my desktop computer (so that it is now version 9.3.0), using Help>Check for Updates.
When I try the same command on my laptop, I get and error message that states "The update server is not responding, which means it may be offline at the moment, or the Internet or firlewall settings may be incorrect. Please try again later." I tried several times yesterday and today with the same error. The message pops up immediatley; it doesn't even seem to actually try to connect.
I disabled my firewall and antivirus software and still get the same result. I uninstalled then reinstalled Acrobat and still get the same result.
I looked online at Adobe.com to see about downloading and installing the updates manually, but it's difficult for me to tell which updates I need. Some are for other languages and some are for 64-bit but I have Windows 7 32-bit.
A call to tech support was no help. The agent seemed to think because I installed verison 9.0 that I only needed the one English update listed on the download page under 9.0, and not any of the later updates. . . And he said that Adobe recommends manually installing updates from Adobe.com rather than using the Check for Updates command (?!).
Anyway, does anyone know what might be causing this problem with the adobe updater? Maybe I need to reinstall the updater (where do I find it?).
OR
Can someone tell me which of the updates listed on the Acrobat dowload page I should manually install to bring my product up to date?
[Running Windows 7 32-bit on both machines]
Thanks.

Hi,
Which version of Acrobat do you have ?
(Launch Acrobat and Go to Acrobat->About Adobe Acrobat menu item and check the version )
Also, can you ping following urls ?
armmf.adobe.com
armdl.adobe.com
ardownload.adobe.com
Are these urls reachable ?
Also, you can check the contents of host file /etc/defaults/host to see that none of the ips are redirected.
One more thing that you could try:
If you have firewall on, could you please disable the firewall and then try the update. Does it works now ?

Adobe Reader 11 w/Windows 7 not responding

Why does Adobe Reader 11 fail to respond sometimes? Re-installing allows it to function several times then we get a "not responding" message. A plank screen is displayed and the number of pages but NO text! Using repair produces the same results. Upon 1st use of the repaired/reinstalled reader 11 we also get the adobe message "Cannot find or create the font "Times New Roman". Some characters may ot display or print correctly". The text is mostly displayed at this point. The second attempt to display the same PDF or another displays completely w/out any error message at all. At some point during the testing process Adobe Reader 11 stops working! Restarts don't help. Shutdowns don't help. Seems only a re-install or repair allows us to correctly view our PDF document a number of times before we have to repeat the process. Is help available?

Moved the discussion from Adobe Reader Touch for Windows 8 to Adobe Reader.

Apps "not responding" and general lag

More than ever it seems apps are freezing and then the message that the app "not responding" comes up and do we want to wait or close. Is there any fix ? Also, my phone still has lag which is possibly uncurable ? Sony making no friends here - a kitkat upgrade would be welcome but isn't coming ! One thing I did do was disable Chrome and install CM browser for android - makes searching less painful and would recommend.

You could reinstall the latest update with PCC Keep in mind that apps are getting heavier and hardware demanding, chrome its known to have an issue at the moment, memory leak, and the Xperia SP has only 1GB of RAM not an ideal combination with this latest updates on apps.

SNMP not responding

Similar Messages

Maybe you are looking for