SNMP over ACE not showing RealServer statistics

Hi All,
I have a semi weird problem. I´m trying to get statistics from my ACE, and I downloaded the MIBs for that and use a program to do a snmpwalk over these. My problem is this: I can get statistics for the Virtual Servers and also some for the real servers (IPs, description, preconfigured values, etc.), but not statistics for connections to the Real Servers.
Both in CISCO-SLB-MIB and CISCO-ENHANCED-SLB-MIB, when I try to do a snmpwalk over slbRealServers and cesRserverEntry, I receive a "no data available " message.
Any ideas will be appreciated.
regards

Hi,
If you look into CISCO-ENHANCED-SLB-MIB (rserver related MIB for ACE). It has cesRserverAdminStatus and cesRserverOperStatus in cesRserverTable. cesRserverTable gives stats of physical rserver (without sfarm association). In the same MIB, cesServerFarmRserverTable gives details of real severs with sfarm association. It has cesServerFarmRserverAdminStatus and cesServerFarmRserverOperStatus for status info. slbVServerState in slbVServerInfoTable of CISCO-SLB-MIB give vserver state.
HTH
Siva

Similar Messages

Cisco LMS Prime: Device Center does not show Port statistics for Routers

Hello,
i am wondering why the Port Statistics for Routers are not showing in the Device Center Port Status Section. Is this normal behaviour?
thanks
Alex

Hi Afroj,
Data Collection as well as Usertracking ran successfully.
regards
Alex

JRA not showing Object Statistics

I am having trouble getting JRA to show 'Object Statistics' as well as the 'Heap
Overview'. I see the note about requiring parallel gc, but the displays are empty.
Any ideas what might be happening?
I use these options to start the app:
-Xms256m -Xmx768m -Xmanagement -Xgc:parallel
and jrockit version:
java version "1.4.1_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_05)
BEA WebLogic JRockit(R) Virtual Machine (build 8.1sp2-1.4.1_05-Load10-viking-win32-sthqa29-20031105-1554,
Native Threads, Generational Concurrent Garbage Collector)

OK, got it. I moved to jrockit-j2sdk1.4.2_03 and it worked.
"David Burns" <[email protected]> wrote:
>
I am having trouble getting JRA to show 'Object Statistics' as well as
the 'Heap
Overview'. I see the note about requiring parallel gc, but the displays
are empty.
Any ideas what might be happening?
I use these options to start the app:
-Xms256m -Xmx768m -Xmanagement -Xgc:parallel
and jrockit version:
java version "1.4.1_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_05)
BEA WebLogic JRockit(R) Virtual Machine (build 8.1sp2-1.4.1_05-Load10-viking-win32-sthqa29-20031105-1554,
Native Threads, Generational Concurrent Garbage Collector)

Stock over view not showing

hi MM guru....
when we initially up load material through MB1C movement type 561...show the massage document no xxxxxxx posted..but in MMBE not showing..even in MB51 not showing that document no...
kindly suggest me
regards
aqueel

then use this info, enter it in the selection screen and try to find the document again.
if you still do not find the document, then you might have entries in the selection screen that restrict your selection.
Further if you have a document, then you should as well have stock, exept you have some more documents that document goods issues.
Further, if you have a document, then the item shown in SM13 cannot belong to this document in MB51, as SM13 only lists posting that have failed.

OSB 11g Dashboard not showing any statistics

Hi,
I am new to OSB, I have a helloworld OSB proxy service created, and I was able to execute it from OSB test console. I saw the statistics when I first ran the test, but after several days and after I restarted the OSB server several times, the statistics are not there any more even though the the service is still running succesful, the message count and av. resp. time all show 0.
Thanks
John

did you by any chance did some changes in monitoring? http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/monitoring_ops.htm#CIHFGCAF
Manoj

ST03N does not show reporting statistics

Dear all,
For a NW04s BI7.0 system I am asked to setup the technical content for BI statistics. As stated in this forum, ST03N now uses the InfoCubes to display the statistics instead of tables like RSDDSTAT_OLAP and RSDDSTAT_DM.
I have activated all business content for the statistics and I have loaded the cubes with data using the process chains, but there are no reporting statistics available in ST03N.
When I choose "BI workload", I only see "Load data" and "Process Chains" under "Analysis Views" tree, but no "Reporting".
Does anyone know how to make the reporting part visible in ST03N?
Thanks in advance,
Steven Groot

Hi Steven,
Our system has the following components:
SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
SAP_BW     700     0012     SAPKW70012     SAP NetWeaver BI 7.0
BI_CONT     703     0005     SAPKIBIIP5     Business Intelligence Content
Based on this, I would think you do not need to apply any newer support packages, SP12 should be fine for BI Content patch level 5.
2-3 months ago when we applied patch 5, also 7 was available but our Basis person said we cannot go for 6 and 7 as those would require applying newer support packages as well.
Unfortunately I have no other idea on how to solve the problem that you have. I just know that I had lots of problems with BI content 703 with no patches and 80% of these problems have disappeared with patch 5.
Please keep us posted if you manage to solve this issue any way.
Thanks and regards,
Csaba

ST03N does not show Infopackage statistics

Hi all,
For a NW04s BI7.0 system I am asked to setup the technical content for BI statistics.
I have activated all business content for the statistics and I have loaded the cubes with data using the process chains, but there are no Infopackage statistics available in ST03N.
Does anyone know how to make the Infopackage visible under "Load data" node. I can able to see DTP under "Load data" node but not the infopackage. I have checked all the steps twice to make sure everything is correct.
FYI: Reporting,Process Chain and Load data(only DTP) nodes are visible under "Analysis Views" tree.
I am just wondering why the Infopackage statistics is not visible under the Load data node.
Any inputs will be highly appreciated.
Thanks
Aky

Hi......
Sorry.....but I never face such a situation........
Still check this.........If this help you........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8733d190-0201-0010-239a-e428b16b2809
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Regards,
Debjani.......

Bi content is not showing statistics data while running the report in porta

hi friends,
I installed the BI Admin Cockpit to collect the statistical information.
I can see the statistics informatio in portal only when i run the query in bex. if i run the report in portal it's not showing any statistics.
could you guide me the exact reason and pls guide me to rectify this problem
thanks in advance,
sruthi.

Any help on this....

When I create a playlist and sync it to my iPhone not all of the playlist transfers over. All of the songs are there and are playable they just do not show up on the playlist.

When I create a playlist and sync it to my iPhone not all of the songs on the playlist transfer over. All of the songs are there and are playable they just do not show up on the playlist. For example, in itunes on my computer a playlist has over 100 songs, but when I sync my phone, my iphone only shows 60 songs. I can go into my phone and add the missing songs to the playlist, but the next time I sync my phone the songs are gone again.

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

Existing files on drive connected to latest Airport Extreme do not show up, however files copied over the air to the drive do. Any ideas?

I have the latest Airport Extreme with a Seagate drive connected. I copied files to the drive while it was connected to my MacBook Pro. The files do not show up when connected to the AE, but they appear when connected to the Macbook, Files copied over the network to the drive appear. The drive is formatted HFS+.

After playing with this for the last few days, I found a solution. Under the "Disks" tab in Airport Utility, the "Secure Shared Disks" drop down needs to be set to "With device password". Mine was set to "With acounts", which even after correct authentication, none of the files would appear.
Another interesting note: The files that I could see, the ones I copied over the network, do not appear now. I can copy over new files, and they show up, but the ones copied prior to changing the "Secure Shared Disks" option, do not.

My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Combing two large libraries (over 1.25 TB total) and music will not show up in library but does in media folder. Help?

I'm a Windows PC user, and I'm currently in the process of combining my 12,000+ song library on my laptop (we'll call it Library A) with a 180,000+ song library (Library B, and yes, one-hundred-and-eighty thousand) onto a new hard drive. I have successfully moved Library A from my laptop onto my new hard drive. The method I have tried so far to move the Library B music into A on the new hard drive is by using the "Add Folder to Library" and selecting only a small portion of the folders in Library B's media folders as not to overload iTunes and to be able to pinpoint problems.
This worked for a few small iterations but the moment I tried doing half of the "A" artists (alphabetically), most of the music doesn't show up in the library. Some of it doesn't show up in the regular library but in the "Recently Added" playlist, and some don't show up in either. I have even tried adding just single files now and those don't show up at all.
THEY ALL SHOW UP IN THE MEDIA FOLDER ON THE NEW HARD DRIVE. That is why I think this might be true but I'm not sure: I've heard that it is because iTunes needs to process all the songs before it shows up in the actual library. Is this true? I have waited over an hour for adding about 6,000 songs; half showed up right in the beginning and half haven't yet. When I added about 4,000 just before this, they all showed up without any problems.
Any help? And is there an easier, error-free way to add this many songs into a new library at once? I'll keep this updated for anyone trying. Thanks in advance!
I have tried signing out and signing in and that does not work either.

hey.
finally somebody with the same problem! i bought a new external drive because i was running out of space and backed up my entire library. then my computer crashed and i wanted to take advantage of a clean drive and not add my whole library back onto my computer. i'd love to be able to access my music folder on the external and have that show up as my library on iTunes when connected...
i followed all the steps as closely as possible and am pretty confident that my advanced preferences in iTunes are correct, but the library does not show these songs from the external drive. have you had any feedback or figured it out on your own?! i hope so, i'm at a deadend.

HT1918 How can I see ALL transaction history in my account. Specifically, I would like to see the gift cards I have redeemed for my account. I know I have over $200 in my account but it is not showing the balance anywhere. Any ideas?!?!?

How can I see ALL transaction history in my account. Specifically, I want to review the gift cards I have redeemed but the amounts are not showing up in my account. I know I have over $200 in my account and I am unable to access it. The site wants me to pay by credit card and I don't want to do that. Any ideas how I can recover the money in my account?

You can only view your account's purchase history, you can't view a history of card redemptions.
My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my iOS devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to).
To view your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
You've tried logging out and back into your account to see if your balance then shows ? If not, and you can't see where it might have been spent, then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My iPhone 5 is not showing up in iPhoto over WiFi. Is this normal? Or will it only show up when I connect with USB ?

My iPhone 5 is not showing up in iPhoto over WiFi.
Is this normal?
Or will it only show up when I connect with USB ?

It will show up, when connected directly by USB as a camera.

HT4075 when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

SNMP over ACE not showing RealServer statistics

Similar Messages

Maybe you are looking for