Snmp query for TenGigE data counters C4510R+E?
Dear community. With the risk of sounding like an idiot I turn to you:
I'm having slight challenges reading the data counters for a ten gigabit Ethernet interfaces on our C4510R+E w/sup8 with this IOS:
bootflash:/cat4500es8-universalk9.SPA.03.03.00.XO.151-1.XO.bin
running snmpwalk on ifindex reveals all indices properly, i.e:
IF-MIB::ifName.1 = STRING: Fa1
IF-MIB::ifName.2 = STRING: Gi1/1
IF-MIB::ifName.3 = STRING: Gi1/2
IF-MIB::ifName.4 = STRING: Gi1/3
…etc…
IF-MIB::ifName.259 = STRING: VLAN-601
IF-MIB::ifName.260 = STRING: VLAN-876
IF-MIB::ifName.261 = STRING: Te5/1--Uncontrolled
IF-MIB::ifName.262 = STRING: Te5/1--Controlled
...etc...
but when trying to see the octet counts from for example ifindex 261 or 262 I get no results at all:
...etc...
IF-MIB::ifHCInOctets.230 = Counter64: 0
IF-MIB::ifHCInOctets.231 = Counter64: 0
NOTE: no ifIndex 261 or 262
IF-MIB::ifHCInOctets.293 = Counter64: 0
IF-MIB::ifHCInOctets.294 = Counter64: 0
...etc...
All other physical interfaces show their values just fine - just not the TenGigE's.
so, dear community: is this a problem, feature or something that can be configured to work differently? or is it just me :-) googling something like "snmp tengigabitethernet counters" brings up mostly problems with the max data rate but in my case the snmp values do not seem to exist at all.
Thanks in advance,
JukkaK
It may be helpful to see the entire output/snmpwalk for ifTable and ifXTable for this device to see if all the data is missing for these indexes/TE interfaces.
Many older IOS has some issues where the details for a perticular linecards and its associated interfaces were missing from Switch.
Many times it worked after reseat of Linecard or Reboot of the entire device. As these are not the easy and not the first choice for many, lets check the outputs first.
Also from the switch, please share output for device for show snmp mib ifmib ifindex command.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**
Similar Messages
-
Query for finding data during special holidays
Hi, i have a table for special holidays that looks like this:
PROFILE_DAY
VAR_DATE
REGULAR_HOLIDAY
1/1/2013
H_WEEK_THURSDAY
3/28/2013
H_WEEK_FRIDAY
3/29/2013
REGULAR_HOLIDAY
12/24/2013
REGULAR_HOLIDAY
12/25/2013
REGULAR_HOLIDAY
12/31/2013
And another table (LOAD_PROFILE_TEST), which contains LOAD_PROF1 values from (TIME_EQ) 0 to 24 at intervals 0.25 for (PROFILE_DAY) MONDAY to SUNDAY including REGULAR_HOLIDAY, H_WEEK_THURSDAY and H_WEEK_FRIDAY. All in all, this table contains 970 records (97 records between 0 to 24 with interval of 0.25 per PROFILE_DAY, with 10 distinct PROFILE_DAY).
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
REGULAR_HOLIDAY
11.47
0.25
REGULAR_HOLIDAY
11.27
0.5
REGULAR_HOLIDAY
11.3
0.75
REGULAR_HOLIDAY
11.08
0
MONDAY
11.27
0.25
MONDAY
11.33
0.5
MONDAY
11.18
Now, I have this query to update value of LOAD_PROF2 of the said table whenever parameters V_DATE_OUT & V_DATE_IN is entered:
UPDATE LOAD_PROFILE_TEST
SET LOAD_PROF2 = LOAD_PROF1 + :LOAD_DIFF
WHERE UPPER(PROFILE_DAY) IN (select UPPER(to_char(:V_DATE_OUT + (level-1), 'fmDAY'))
from dual
connect by level <= :V_DATE_IN - :V_DATE_OUT + 1
where :LOAD_DIFF is a certain pre-determined value.
This query works fine if i am trying to update regular days from MONDAY to SUNDAY. What i would like to do is to determine if the two parameter dates, V_DATE_OUT & V_DATE_IN would fall under any of the holidays on the first table LOAD_PROFILE_TEST, then update only those rows. For example, V_DATE_OUT = 12/02/2013, Monday and V_DATE_IN = 12/06/2013, Friday. The query above would update the values of LOAD_PROF2 for PROFILE_DAY - MONDAY to FRIDAY, corresponding to dates 12/02/2013 and 12/06/2013. If however, V_DATE_OUT = 12/23/2013, Monday and V_DATE_IN = 12/27/2013, Friday, this should update the rows corresponding to PROFILE_DAY - MONDAY for 12/23/2013, THURSDAY for 12/26/2013, FRIDAY for 12/27/2013, and REGULAR_HOLIDAY for the dates 12/24/2013 and 12/25/2013 since these two are included in the first table (table of holidays). This same scenario will work the same way when V_DATE_OUT and/or V_DATE_IN fall in the dates 3/28/2013 and 3/29/2013. All other dates not included in the table for special holidays will be treated according to the day they fall on (Monday thru Sunday). I hope my point is clear. Thank you in advance.Thanks for your reply. Firstly, I am using Forms [32 Bit] Version 10.1.2.0.2 (Production). I will try to explain a little further but I don't know if i can give the exact details of the tables since this would be voluminous. First i have a table REG_HOLIDAYS, whcih contain the following:
PROFILE_DAY
VAR_DATE
REGULAR_HOLIDAY
1/1/2013
H_WEEK_THURSDAY
3/28/2013
H_WEEK_FRIDAY
3/29/2013
REGULAR_HOLIDAY
12/24/2013
REGULAR_HOLIDAY
12/31/2013
REGULAR_HOLIDAY
12/25/2013
Now i have another table LOAD_PROFILE_TEST which i will simplify just to show what i wanted to do:
CREATE
TABLE LOAD_PROFILE_TEST
TIME_EQ
NUMBER (5, 2),
PROFILE_DAY
VARCHAR2 (15 BYTE),
LOAD_PROF1
NUMBER (6, 2),
LOAD_PROF2
NUMBER (6, 2)
Here are the sample values of this table:
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
Monday
2
0
Tuesday
2.1
0
Wednesday
2.3
0
Thursday
2.5
0
Friday
2.2
0
Saturday
2.4
0
Sunday
2.3
0
Regular_holiday
1.9
0.25
Monday
2.1
0.25
Tuesday
2.1
0.25
Wednesday
2.4
0.25
Thursday
2.2
0.25
Friday
2.5
0.25
Saturday
2.3
0.25
Sunday
2.3
0.25
Regular_holiday
2.5
However, in the actual table, TIME_EQ will start with 0 until 24 with interval of 0.25 (i.e 0, 0.25, 0.5, 0.75, 1, 1.25, 1.5, ...23.5, 23.75, 24). So for a PROFILE_DAY of 'Monday', there will be 97 rows corresponding to TIME_EQ of 0 to 24. The same is true for Tuesday, Wednesday until Sunday including Regular_holiday. All in all, this table would contain 776 rows. LOAD_PROF1 values are random values initally inputted with PROFILE_DAY and TIME_EQ.
The first goal is to UPDATE this table (LOAD_PROFILE_TEST) by updating the column LOAD_PROF2 by adding a certain parameter value, :LOAD_DIFF, say 0.1. Now, i will have two scenarios to show what i would like to happen. First, i have two date parameters :V_DATE_OUT and :V_DATE_IN.
First Case, V_DATE_OUT = 12/15/2013 (Monday); V_DATE_IN = 12/22/2013 (Sunday)
I will have this query to update said table:
UPDATE LOAD_PROFILE_TEST
SET LOAD_PROF2 = LOAD_PROF1 + :LOAD_DIFF
WHERE UPPER(PROFILE_DAY) IN (select UPPER(
to_char(
:V_DATE_OUT + (level-1),
'fmDAY'))
from dual
connect by level <=
:V_DATE_IN - :V_DATE_OUT + 1);
The output of this query would be:
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
Monday
2
2.1
0
Tuesday
2.1
2.2
0
Wednesday
2.3
2.4
0
Thursday
2.5
2.6
0
Friday
2.2
2.3
0
Saturday
2.4
2.5
0
Sunday
2.3
2.4
0
Regular_holiday
1.9
0.25
Monday
2.1
2.2
0.25
Tuesday
2.1
2.2
0.25
Wednesday
2.4
2.5
0.25
Thursday
2.2
2.3
0.25
Friday
2.5
2.6
0.25
Saturday
2.3
2.4
0.25
Sunday
2.3
2.4
0.25
Regular_holiday
2.5
Since, 12/15/2013 up to 12/22/2013 is from Monday to Sunday without having a particular day included in the first table, REG_HOLIDAYS, therefore all the rows with Monday to Sunday are updated.
Second Case, V_DATE_OUT = 12/23/2013 (Monday); V_DATE_IN = 12/29/2013 (Sunday)
Take note that 12/24 and 12/25 are included in the first table, REG_HOLIDAYS, therefore i need a query so that this would be my output afterwards:
TIME_EQ
PROFILE_DAY
LOAD_PROF1
LOAD_PROF2
0
Monday
2
2.1
0
Tuesday
2.1
0
Wednesday
2.3
0
Thursday
2.5
2.6
0
Friday
2.2
2.3
0
Saturday
2.4
2.5
0
Sunday
2.3
2.4
0
Regular_holiday
1.9
2.0
0.25
Monday
2.1
2.2
0.25
Tuesday
2.1
0.25
Wednesday
2.4
0.25
Thursday
2.2
2.3
0.25
Friday
2.5
2.6
0.25
Saturday
2.3
2.4
0.25
Sunday
2.3
2.4
0.25
Regular_holiday
2.5
2.6
As can be seen, since 12/23/2013 up to 12/29/2013 is from Monday to Sunday, rows with Monday upto Sunday should be updated, HOWEVER, since 12/24 and 12/25 which falls on a Tuesday and a Wednesday also were declared as holidays (included in the REG_HOLIDAYS table), instead of updating rows with PROFILE_DAY of Tuesday and Wednesday, the query should instead update rows with Regular_holiday as PROFILE_DAY and leave as is the rows with Tuesday and Wednesday. Additional note, days declared in the REG_HOLIDAYS table with PROFILE_DAY of Regular_holidays are treated as DISTINCT as in the case of 12/24 and 12/25.
The query you gave me gives the correct value if the involved days between V_DATE_OUT and V_DATE_IN is from Monday to Sunday only, otherwise it always gives Regular_holiday only regardless of the other dates queried. As in the first case above, it would give Monday to Sunday (correct) but for the second case, it will only give Regular_holiday, the other days (Monday, Thursday, Friday, Saturday and Sunday) was not outputted.
I hope this became clearer since i will still be needing this for another query which i will inquire again after resolving this issue. Thanks a lot for your help. -
Trouble writing Query for Pivoting data from a table
I am having a little trouble writing a query for converting the below table data into a pivot data. I am trying to write a query for which if I give a single valid report_week date as input it should give me the data for that week and also provide two extra columns, one which gives the data of last week for the same countries and the second column which gives the difference of numbers in both the columns(i.e. COUNT - COUNT_LAST_WEEK).
REPORT_WEEK DIVISION COUNT
9/26/2009 country1 81
9/26/2009 country2 97
9/26/2009 country3 12
9/26/2009 country4 26
9/26/2009 country5 101
10/3/2009 country1 85
10/3/2009 country2 98
10/3/2009 country3 10
10/3/2009 country4 24
10/3/2009 country5 101
10/10/2009 country1 84
10/10/2009 country2 98
10/10/2009 country3 10
10/10/2009 country4 25
10/10/2009 country5 102
For example, if I give input as 10/10/2009, the output should be as give below.
REPORT_WEEK DIVISION COUNT COUNT_LAST_WEEK DIFFERENCE
10/10/2009 country1 84 85 -1
10/10/2009 country2 98 98 0
10/10/2009 country3 10 10 0
10/10/2009 country4 25 24 1
10/10/2009 country5 102 101 1
For example, if I give input as 10/3/2009, the output should be as give below.
REPORT_WEEK DIVISION COUNT COUNT_LAST_WEEK DIFFERENCE
10/3/2009 country1 85 81 4
10/3/2009 country2 98 97 1
10/3/2009 country3 10 12 -2
10/3/2009 country4 24 26 -2
10/3/2009 country5 101 101 0
Can anyone please shed some light on Query building for the above scenarios.
Thank you
SKP
Edited by: user11343284 on Oct 10, 2009 7:53 AM
Edited by: user11343284 on Oct 10, 2009 8:28 AMI assume there is no gap in report weeks. If so:
SQL> variable report_week varchar2(10)
SQL> exec :report_week := '10/10/2009'
PL/SQL procedure successfully completed.
with t as (
select to_date('9/26/2009','mm/dd/yyyy') report_week,'country1' division,81 cnt from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country2',97 from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country3',12 from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country4',26 from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country5',101 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country1',85 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country2',98 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country3',10 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country4',24 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country5',101 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country1',84 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country2',98 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country3',10 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country4',25 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country5',102 from dual
select max(report_week) report_week,
division,
max(cnt) keep(dense_rank last order by report_week) cnt_this_week,
max(cnt) keep(dense_rank first order by report_week) cnt_last_week,
max(cnt) keep(dense_rank last order by report_week) - max(cnt) keep(dense_rank first order by report_week) difference
from t
where report_week in (to_date(:report_week,'mm/dd/yyyy'),to_date(:report_week,'mm/dd/yyyy') - 7)
group by division
order by division
REPORT_WE DIVISION CNT_THIS_WEEK CNT_LAST_WEEK DIFFERENCE
10-OCT-09 country1 84 85 -1
10-OCT-09 country2 98 98 0
10-OCT-09 country3 10 10 0
10-OCT-09 country4 25 24 1
10-OCT-09 country5 102 101 1
SQL> exec :report_week := '10/3/2009'
PL/SQL procedure successfully completed.
SQL> /
REPORT_WE DIVISION CNT_THIS_WEEK CNT_LAST_WEEK DIFFERENCE
03-OCT-09 country1 85 81 4
03-OCT-09 country2 98 97 1
03-OCT-09 country3 10 12 -2
03-OCT-09 country4 24 26 -2
03-OCT-09 country5 101 101 0
SQL> SY. -
Hi All,
How to write a query for an alert to be generated 5 days before the document due date?
thanks
SV ReddyHi Everybody for your valuable suggestions.
When we execute this query in normal mode by going to user query menu, it returns some records that can be displayed on to the screen in a separate window. When you attach this query to an Alert, how the Alert will trigger ?
Is it when the query returns more than 1 record then the name of the Alert will display in the inbox of the user ?
OR
Is it the result of the query displayed in the window?
What will happen when this query returns 0 records ? means is that true the alert wont be triggerred ?
What is the base criteria that an alert take in to consideration when to send a popup to the specified users?
Please reply
Thanks -
Hi, How I can get the max(Gst_date) record of GRD. IF record of GRD has more than one record then I need the one max(GST_date) record of every GRD. Thanks.
create table #CRT (CRT numeric, GRD numeric, GST_Date datetime)
insert into #CRT values (7 ,1900,'01-01-2000')
insert into #CRT values (19,1900,'01-01-2002')
insert into #CRT values (24,1900,'01-01-2013')
insert into #CRT values (7 ,2100,'01-01-2010')
insert into #CRT values (19,2100,'01-01-2012')
insert into #CRT values (7 ,2200,'01-01-2012')
insert into #CRT values (19,2200,'02-02-2012')
I would like the following output from query. The following record is the max(GST_Date ) of every '''GRD'".
CRT GRD GST_Date
24 1900 01-01-2013
19 2100 01-01-2012
19 2200 02-02-2012Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. Everything you posted is wrong. You should follow ISO-8601 rules for
displaying temporal data. In fact is is required by ANSI/ISO Standards. You failed again. We need to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. You need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
Please, please learn why rows are not records. You do not even know what a key is or how to write a INTEGER NOT NULL(s, p) declaration. Allowing a table and column to have the same name is legal syntax and we regret not taking it out of the Standard. It is
stupid! How can a set also be an attribute of itself? But your DDL gave no attribute properties, as per ISO-11179.
Here is my attempt at repairs
CREATE TABLE CRT
(crt_something INTEGER NOT NULL,
grd_something INTEGER NOT NULL,
PRIMARY KEY (crt_something, grd_something),
gst_date DATE NOT NULL);
Here is how we write an insertion statement; you are still using Sybase syntax! Why did you pick the most ambiguous, non-ANSI date display format?
INSERT INTO CRT
VALUES
( 7, 1900, '2000-01-01),
( 7, 2100, '2010-01-01'),
( 7, 2200, '2012-01-01'),
(19, 1900, '2002-01-01'),
(19, 2100, '2012-01-01'),
(19, 2200, '2012-02-02'),
(24, 1900, '2013-01-01');
>> How I can get the MAX(gst_date) record [sic] of grd_something. If record [sic] of grd_something has more than one record [sic] then I need the one MAX(gst_date) record [sic] of every grd_something. <<
WITH X
(SELECT crt_something, grd_something, gst_date,
MAX(gst_date)
OVER (PARTITION BY grd_something) AS gst_date_max
FROM CRT)
SELECT *
FROM X
WHERE gst_date_max = gst_date;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Query for spatial data with a GeometryCollection fails
There are exact 538 CurvePolygons (only exterior rings at this
sample). All of them are valid geometries and equal in dimension
and so on. Now I connect them to a GeometryCollection and query
for other relating spatial data in some tables. It seems that
the use of around (not exact!) 200 CurvePolygon in one
GeometryCollection works fine but the adding of more
CurvePolygon result in an error with the Spatial Index (I could
add the ORA- error numbers if I have some data in my test tables
again next days).
Is there anybody else having trouble with these mysterious
problem? Maybe there is a border by the number of points in
GeometryCollection?
(More details, programming code could be delivered)
(working with Java 1.3.1, oracle.sdoapi.*, Oracle 8.1.7.)Hi Lutz,
Could you provide more info or samples of what is going wrong?
Also, could you try making sure the geometry you are passing in
as the query window is valid (i.e. instead of passing it in as a
query window, pass it into sdo_geom.validate_geometry).
Thanks,
Dan -
Query for inserting data into table and incrementing the PK.. pls help
I have one table dd_prohibited_country. prohibit_country_key is the primary key column.
I have to insert data into dd_prohibited_country based on records already present.
The scenario I should follow is:
For Level_id 'EA' and prohibited_level_id 'EA' I should retreive the
max(prohibit_country_key) and starting from the maximum number again I have to insert them
into dd_prohibited_country. While inserting I have to increment the prohibit_country_key and
shall replace the values of level_id and prohibited_level_id.
(If 'EA' occurs, I have to replace with 'EUR')
For Instance,
If there are 15 records in dd_prohibited_country with Level_id 'EA' and prohibited_level_id 'EA', then
I have to insert these 15 records starting with prohibit_country_key 16 (Afetr 15 I should start inserting with number 16)
I have written the following query for this:
insert into dd_prohibited_country
select
a.pkey,
b.levelid,
b.ieflag,
b.plevelid
from
(select
max(prohibit_country_key) pkey
from
dd_prohibited_country) a,
(select
prohibit_country_key pkey,
replace(level_id,'EA','EUR') levelid,
level_id_flg as ieflag,
replace(prohibited_level_id,'EA','EUR') plevelid
from
dd_prohibited_country
where
level_id = 'EA' or prohibited_level_id = 'EA') b
My problem here is, I am always getting a.pkey as 15, because I am not incrementing it.
I tried incrementing it also, but I am unable to acheive it.
Can anyone please hepl me in writing this query.
Thanks in advance
Regards
RaghuBecause you are not incrementing your pkey. Try like this.
insert
into dd_prohibited_country
select a.pkey+b.pkey,
b.levelid,
b.ieflag,
b.plevelid
from (select max(prohibit_country_key) pkey
from dd_prohibited_country) a,
(select row_number() over (order by prohibit_country_key) pkey,
replace(level_id,'EA','EUR') levelid,
level_id_flg as ieflag,
replace(prohibited_level_id,'EA','EUR') plevelid
from dd_prohibited_country
where level_id = 'EA' or prohibited_level_id = 'EA') bNote: If you are in multiple user environment you can get into trouble for incrementing your PKey like this. -
Master data time dependant attribute in query for several dates
Hello all,
I need to create a query to display prices for a material in different periods.
The user will enter a period interval. For each period, they want to know the material price the last day of that period.
Material price is a time-dependat attribute of material, and I created one formula variable to display it. The problem is the using the key-date of the query only works for a date, but not for severals.
Is there any other way to do it?
If not, the only solution I find is to have in the infoprovider the prices that I need, but I don't think this is a good practice.
Any suggestions?
Thanks!I have just seen something: in fact the created lines are:
Key1 Compound1 fromdate todate attr1 attr2
0001 L 01.01.1000 01.01.2006 <empty
so as you can see, the right interval is created but the attributes are not up to date.
Cheers.
Cyril. -
Query for getting data for every quarter for financial year
Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.lakmesri wrote:
Hi,
My problem is I need to get the data for every quarter for financial year and also I need data for every week for financial year.
For example for financial year 2012-13, Apr2012 to Jun2012 would be Q1, Jul2012 to Sep2012 would be Q2 and so on. Total 8quarters should come upto Apr2013.
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
How can you get 8 quarters within a year ? I'b be concerned here.
lakmesri wrote:
Hi,
In the same way 1st apr 2012 to 7th apr 2012 would be week1, 8th apr to 15th apr would be week2 and son on. How to write a query for this scenario in oracle. Can anybody help me on this. very urgent..
Thanks in advance.
First, that question is really not clearly asked. Second how could it be urgent ? You even did not tell us your Oracle version, did not show any tables descr, output sample nor any effort on your side to work on.
Nicolas. -
Query for FormSubmit data by ID via the SOAP API
When I submit a form entry via the SOAP API request 'Create' it get an ID as well as the Form Type data in return:
<CreateResponse xmlns="https://secure.eloqua.com/API/1.2">
<CreateResult xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<CreateResult>
<EntityType>
<ID>21</ID>
<Name>aherghaewForm</Name>
<Type>Form</Type>
</EntityType>
<Errors/>
<ID>3</ID>
</CreateResult>
</CreateResult>
</CreateResponse>
However, I can't seem to query for that ID. When using the request 'Query'
<ns:Query>
<ns:eloquaType>
<ns:ID>21</ns:ID>
<ns:Type>Form</ns:Type>
</ns:eloquaType>
<ns:searchQuery>ID='3'</ns:searchQuery>
<ns:pageNumber>1</ns:pageNumber>
<ns:pageSize>20</ns:pageSize>
</ns:Query>
I receive the following Error:
The search query you provided is invalid: 'id' is invalid.
As the field 'ID' is not part of the FieldValueCollection, this outcome is not unexpected, but unfortunate, as it would greatly simplify querying for data that was just submitted. Querying for a field that is part of the FieldValueCollection delivers correct results.
Is there a way to do just that, or do i have to follow another approach to retrieve FormSubmit data?
Thanks,
FelixOK. I see column X logic now:
SQL> select id,
2 name,
3 case when instr(sys_connect_by_path(id,',') || ',',',4,') > 0 then 'X' else 'Y' end x
4 from worker
5 start with id in (
6 select id
7 from worker
8 where boss_id is null
9 start with id = 4
10 connect by prior boss_id = id
11 )
12 connect by prior id = boss_id
13 /
ID NAME X
1 Mennan Y
2 Ahmet Y
3 Akin Y
4 Ayse X
5 Aylin X
6 Selim Y
6 rows selected.
SQL>SY. -
SNMP Query for Byspass Status (AIP5)
I'd like to monitor the state of Bypass mode for the ASA-SSC-AIP-5 and would like to know if I can check this with SNMP and if so, which OID.
I started messing with SNMP and the SSC5 a while back and started a thread about snmpwalk causing it to crash. After that, I never really picked the project back up.
I've been known to miss the obvious every now and then, but I was dissapointed to see that there wasn't an (obvious) way for the device to alert you when it automatically goes into bypass mode. This should be a feature request.IPS provides SNMP traps for different interface conditions like link going down or up, traffic bypass started, etc. Below is one such example
Received SNMPv2c Trap: Community: "public"
From: 10.89.149.204 mib_2.1.3.0 = 38429472
snmpModules.1.1.4.1.0 = ciscoMgmt.138.2.0.1
ciscoMgmt.138.1.3.3.1.3 = 3 <==== index can be mapped to index obtained from snmpwalk
ciscoMgmt.138.1.3.3.1.4 = 5 <==== Traffic bypass started
ciscoMgmt.138.1.3.3.1.5 = 4
ciscoMgmt.138.1.3.3.1.6 = 38429472
All you need to do is enable sending traps from the sensor.
qssp-8085(config)# service notification
qssp-8085(config-not)# enable-set-get true
qssp-8085(config-not)# enable-notification true
qssp-8085(config-not)# read-only-community public
qssp-8085(config-not)# read-write-community private
qssp-8085(config-not)# trap-destinations x.x.x.x <===== trap destination
qssp-8085(config-not-tra)# exit
qssp-8085(config-not)# exit
You can configure separate community name under trap-destination. If not provided then the read-write-community will be used to send with the trap.
Hope this helps
Madhu -
VStest.console.exe Query for a Data Row Result DURING Test Execution Status
I started with the following
thread and was asked to create a new thread.
I have the following test that reads a .csv as a data source.
/// <summary>
/// Summary description for Test
/// </summary>
[TestCategory("LongTest"),
TestCategory("Visual Studio 2013"), TestMethod]
[DeploymentItem("data.csv")]
[DataSource("Microsoft.VisualStudio.TestTools.DataSource.CSV",
"|DataDirectory|\\data.csv",
"data#csv",
DataAccessMethod.Sequential),
DeploymentItem("data.csv")]
public void Create_And_Build_All_Templates()
testmethodname = "Create And Build All Templates ";
LaunchVisualStudio2013();
When I run the test from VStest.console.exe, I see the following:
vstest.console.exe /testcasefilter:"TestCategory=LongTest" /settings:"C:\testing\CodedUI.testsettings" /logger:TRX /logger:CodedUITestLogger C:\AppTests\CodedUITest.dll
Microsoft (R) Test Execution Command Line Tool Version 12.0.31101.0
Copyright (c) Microsoft Corporation. All rights reserved.
Running tests in C:\testing\bin\debug\TestResults
Starting test execution, please wait...
I want to report on the status of the iterations DURING the test run from VStest.console.exe, like how the test explorer window does this.
How can I achieve the output below (notice the (Data Row ) values) ?
vstest.console.exe
/testcasefilter:"TestCategory=LongTest"
/settings:"C:\testing\CodedUI.testsettings"
/logger:TRX
/logger:CodedUITestLogger
C:\AppTests\CodedUITest.dll
Microsoft (R) Test Execution Command Line Tool Version 12.0.31101.0
Copyright (c) Microsoft Corporation. All rights reserved.
Running tests in C:\testing\bin\debug\TestResults
Starting test execution, please wait...
Test Passed - Create_And_Build_All_Templates (Data Row 1)
Test Passed - Create_And_Build_All_Templates (Data Row 2)
Test Failed - Create_And_Build_All_Templates (Data Row 3)
Test Passed - Create_And_Build_All_Templates (Data Row 4)
Ian CeicysJack, again the results are printed to the std. out console AFTER the test data row has been completed. Is there a way to query VSTest.console and find out which test\data row is being executed so it can be written out to the console
DURING the test run?
I put together the following screencast showing the issue:
http://www.screencast.com/t/IrxxfhGlzD
Also here is the github repo with the source code that I included in the screen cast:
https://github.com/ianceicys/VisualStudioSamples2015
Take a look at LongRunningDataDrivenTest.sln
Unit Test
[TestClass]
public class UnitTest
public static int _executedTests = 0;
public static int _passedTests = 0;
public void IncrementTests()
_executedTests++;
public void IncrementPassedTests()
_passedTests++;
[TestInitialize]
public void TestInitialize()
IncrementTests();
Console.WriteLine("Total tests Row executed: {0}", _executedTests);
[TestCleanup]
public void TestCleanup()
if (TestContext.CurrentTestOutcome == UnitTestOutcome.Passed)
IncrementPassedTests();
Console.WriteLine("Total passed tests: {0}", _passedTests);
private TestContext testContextInstance;
/// <summary>
/// Long Running Test
/// </summary>
[TestCategory("Long Running Test Example"),TestMethod]
[DeploymentItem("data.csv")]
[DataSource("Microsoft.VisualStudio.TestTools.DataSource.CSV",
"|DataDirectory|\\data.csv",
"data#csv",
DataAccessMethod.Sequential),
DeploymentItem("data.csv")]
public void LongRunning_TestMethod_Takes_Over_30_Seconds_to_Run()
WaitTime(Convert.ToInt32(TestContext.DataRow["WaitTime"].ToString()));
public void WaitTime (int waittime)
Thread.Sleep(waittime);
public TestContext TestContext
get { return testContextInstance; }
set { testContextInstance = value; }
data.csv
WaitTime,
13000
19000
10000
11000
15000
Ian Ceicys -
SNMP Query for active tunnels inaccurate
Hi,
I use the following OID: 1.3.6.1.4.1.9.9.171.1.3.1.1.0 to query my 3005 concentrator for the number of active tunnels. The number of tunnels averages around 4-8 at a time, but about 40% of the time, the returned value is 85. This is skewing my results.
This may coincide with enabling WebVPN, but even the statistics on the web pages of the 3005 never even come close to this value.
Any suggestions?
Thanks,
Daveshow counters output might help you in analysis
-
SNMP query for multicast group count
I want to get the total number of multicast groups on a switch. Is there an oid that will give me the info (ie. the number that's given by "show ip igmp snooping groups count")? If there is no oid, is there a way query the groups (show ip igmp snooping groups)? I'm thinking with the 2nd option I might be able to count the number of entries returned by an snmpwalk or something and turn that into a number.
Right now i'm logging into the switch with a script and running the command but that might be a problem with all those logins (only every 5 minutes though) so I'd like to do this via SNMP if possible.
Any ideas?
ThanksWorks just fine!!!
Thanks!
LA$$E
Hi,
Well, at the very least, you can create a formula
column in your break group using a combination of the
same where clause as your original query and the
break values for the group so that you are getting
the correct records. If you have it in the break
group, then it will execute for each record in that
group.
Hope that helps,
Toby -
Sql query for quarter data..Please help
Dear Experts,
Please help with this query...
i have data like below:
Year
Quarter
MRR
MRR%
2012
Q1
10
Q2
30
Q3
50
Q4
60
2013
Q1
20
Q2
30
Now i need to caluclate MRR % column values as below
for 2012 Q2 MRR % = (Q2MRR-Q1MRR)/Q1*100 that is (30-10)/10*100
for 2012 Q3 MRR % = (Q4MRR-Q3MRR)/Q2*100
for 2012 Q4 MRR %= (Q1MRR-Q4MRR)/Q1*100 here q1 of 2013 and q4 of 2012...
like this it wll go on..
Please help with me query compute values in MRR % column.
Best regards
aspMaybe NOT TESTED! No Database at hand
select year,quarter,mrr,
ratio_to_report(q_mrr) over (partition by year order by quarter) pct_mrr
from (select year,quarter,mrr,
mrr - lag(mrr,1,0) over (partition by year order by quarter) q_mrr
from t
Regards
Etbin
Maybe you are looking for
-
Mac book pro crashes frequently after hibernation
mac book pro OSX10.9.1 , recently the mac book pro has been crashing after recovering from hibernation , Can anyine point to the root cause , here is the crash report panic(cpu 0 caller 0xffffff8004082a76): "Hibernate restore error e00002ca"@/SourceC
-
I made my website and upload it to the .mac service with IWeb 08, then I set up a custom domain. I followed instructions and just created a Cname or Alias in Godaddy pointing web.mac.com. Now everything is working with the exception that I lost email
-
Address Bar Dropdown Option like IE
I know that I should be thinking outside of the "Windows Box" but my wife liked using the drop down arrow in IE and finding her previous websites that way. She is begining to get use to typing in the begining part of the site and Safari showing it be
-
Remote mobil me icon from menubar
With iCloud there is no reason to keep the mobil me synch icon in the menu bar. It isn't clear how to remove it. The mobil me preference panel shows that synch is now done through iCloud and doesn't have the check box to remove the synch icon.
-
"negative blacks" test image.
Hi, I have the "negative blacks" issue and I think I have a good sample image for people to test this out. This: http://www.pbase.com/lurchnc/image/81689347 really shows the symptoms on my iPod. Browse to it on your iPod and let us know your results.