SNMP Shows 4G WWAN EHWIC Card as GigE0/3!!!
I have a Cisco 2901 router with a 4G LTE Verizon EHWIC Cellular card. For some reason, a "GigabitEthernet0/3" interface shows up under this cellular card in our SNMP data. There are only 2 embedded GigE interfaces on this router. The output from "show diag" lists the proper interfaces, but any SNMP data pops in this extra GigE interface!
I have attached a screenshot and a text file output.
Any ideas why this extra GigE interface shows up?
UPDATE: 23 Aug 2013
Looks like this is some sort of backplane interface? See jpgs.
Message was edited by: Scot Geer
Hi,
we do not have a 4G card, but we are having the same issue, via snmp we are getting g0/3 which does not exist at the router.
Similar Messages
-
EHWIC Card is not detecting when we put in the router
Hello Guys,
Currently my router doesn't detects the ehwic card and its currently working on hwic.
I just need to confirm if ehwic card supports T series IOS .
as per the below Cisco document it support min IOS 15.1.M series & I'm using 154-1.T1
appreciate if somebody can quickly confirm the same
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan-interface-cards/qa_c67-660125.html
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/software/feature/guide/EHWIC_1_GE_SFP_CU_FM.html#wp1069000
please find my current IOS version & card type
Card is : EHWIC-1GE-SFP-CUV01
#Show version
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.4(1)T1, REL
EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 12-Feb-14 04:27 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Router uptime is 2 weeks, 3 days, 11 hours, 54 minutes
System returned to ROM by power-on
System image file is "flash0:c1900-universalk9-mz.SPA.154-1.T1.bin"
Last reload type: Normal Reload
Last reload reason: power-on
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)Got the things from one test router having different image .please find below.,
#sho version
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Dec-09 14:14 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M3, RELEASE SOFTWARE (fc1)
uptime is 50 minutes
System returned to ROM by power-on
System image file is "flash0:c1900-universalk9-mz.SPA.150-1.M1.bin"
##### sh diag
Slot 0:
C1941 Mother board 2GE, integrated VPN and 2W Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:50:40 ago
EEPROM contents at hardware discovery:
PCB Serial Number :
Hardware Revision : 1.0
Part Number :
Top Assy. Part Number : 800-30798-01
Board Revision : B0
Deviation Number : 0
Fab Version : 03
Product (FRU) Number : CISCO1941/K9
Version Identifier : V01
CLEI Code :
Processor type : C8
Chassis Serial Number :
Chassis MAC Address :
MAC Address block size : 96
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
WIC Slot 0:
- Unknown WAN daughter card
WIC module not supported/disabled in this slot
PCB Serial Number :
Hardware Revision : 1.0
Part Number :
Board Revision : A1
Top Assy. Part Number : 800-34350-01
Deviation Number : 0
Fab Version : 05
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : EHWIC-1GE-SFP-CU
Version Identifier : V01
CLEI Code :
Unknown Field (type 00D4): CC
Asset Identifier : A0
EEPROM format version 4
EEPROM contents (hex):
===
show inventory
NAME: "CISCO1941/K9 chassis", DESCR: "CISCO1941/K9 chassis"
PID: CISCO1941/K9 , VID: V01 , SN: ###### -
Nvidia GF 9500M shows up as two cards. How to manage?
My Nvidia GF 9500M shows up as two cards: 9200M at PCI:0:2:0:0 and 9400M at PCI:0:3:0:0. Currently, I only include the 9400M in my xorg.conf (Currently the same as the example on the Dell XPS 13 entry in the wiki) However, the 9200M continues to generate errors when I start my X server:
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 15 19:02:22 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:0:3:5) 10de:0aa3:1028:0271 nVidia Corporation MCP79 Co-processor rev 177, Mem @ 0xf0600000/524288
(--) PCI: (0:2:0:0) 10de:06e8:1028:0271 nVidia Corporation G98 [GeForce 9200M GS] rev 161, Mem @ 0xae000000/16777216, 0xd0000000/268435456, 0xac000000/33554432, I/O @ 0x00004000/128
(--) PCI: (0:3:0:0) 10de:0866:1028:0271 nVidia Corporation C79 [GeForce 9400M G] rev 177, Mem @ 0xaa000000/16777216, 0xb0000000/268435456, 0xcc000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is:
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TwinView" "False"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "True"
(**) NVIDIA(0): Option "SLI" "Auto"
(**) NVIDIA(0): Option "TripleBuffer" "true"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): NVIDIA SLI auto-select rendering option.
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize one NVIDIA graphics device!
(WW) NVIDIA(0): Failed to initialize SLI configuration. Reason: One GPU
(WW) NVIDIA(0): failed to initialize; Only one GPU will be used for this X
(WW) NVIDIA(0): screen.
(II) NVIDIA(0): NVIDIA GPU GeForce 9400M G (C79) at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.79.3f.00.01
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 9400M G at PCI:3:0:0:
(--) NVIDIA(0): Seiko (DFP-0)
(--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (125, 119); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device PCI:2:0:0.
(EE) NVIDIA(GPU-1): Please check your system's kernel log for additional error
(EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
(EE) NVIDIA(GPU-1): README for additional information.
(EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "AddARGBLXVisuals" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) Synaptics touchpad driver version 1.1.3
(--) Mouse0 auto-dev sets device to /dev/input/event9
(**) Option "Device" "/dev/input/event9"
(II) Mouse0: x-axis range 1472 - 5472
(II) Mouse0: y-axis range 1408 - 4448
(II) Mouse0: pressure range 0 - 255
(II) Mouse0: finger width range 0 - 0
(II) Mouse0: buttons: left right middle
(**) Option "SHMConfig" "on"
(**) Option "EmulateTwoFingerMinZ" "10"
(**) Option "VertScrollDelta" "80"
(**) Option "HorizScrollDelta" "80"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) Mouse0: touchpad found
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(II) XINPUT: Adding extended input device "Mouse0" (type: TOUCHPAD)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(--) Mouse0: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Integrated Webcam
(**) Integrated Webcam: always reports core events
(**) Integrated Webcam: Device: "/dev/input/event8"
(II) Integrated Webcam: Found keys
(II) Integrated Webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
I assume the 9200M isn't meant to be accessed directly and the current setup seems to work. However, is there a correct/more elegant way to manage this two card issue and get rid of the errors on startup?The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49) -
Reg: My photo is not showing in my business Card
Dear All,
In my profile i am uploading my photo as the way of
https://wiki.sdn.sap.com/wiki/download/attachments/21693264/251220071326.jpg
this URL i given in my personal URL. And it will be showing in my business card. when other persons are clicking my business card we will get the photo space know. In the place of photo space below the photo space there personal URL i am giving my personal URL like that
https://wiki.sdn.sap.com/wiki/download/attachments/21693264/251220071326.jpg.
When others clicking this URL everybody can see the image of mine. Instead of this i have to display
my image instead of my URL. This is my query.
For this type of query what should i have to do for displaying my image instead of giving my URL directly i have to display my image in the available photo space. As early as possible clear my issues.
Thanks,
Sankar M.If you are trying to display your image in your wiki profile, you can use the wiki markup language and reference the image like this (using the full image url.jpg)
If you are using the WYSIWYG editor you can use the graphic icon to insert the reference to the url in the wiki.
In the business card you can directly reference your url and embed: http://wiki.sdn.sap.com/wiki/download/attachments/21693264/251220071326.jpg -
My airport show that the airport card doesn't install. How can I solve this symptom? It's usable 2 days ago.
Usually, if your Mac tells you "no AirPort card installed", it's because of power not properly being supplied to the AirPort card. Sometimes this symptom is related to hardware issues.
Reset the SMC of your computer. There are different ways of resetting, depending on the Mac you are using. -
i hv ugraded my 3gs software to ios 6,it hs installed successfully nd the iphone itself restarted bt their is no service written at the top left corner nd i m stuck,i dont knw hw to proceed.itunes is showing the no sim card intalled. the sim card is ok.plz help me out
Yes, I agree - 10 seconds can be a bit short for a backlight, but it makes you read faster and act faster - and that is a skill you can use everywhere in live.
In my next Nokia I hope they take it down to 9 seconds :-) -
while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?
Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W. -
For some reason I have 2 contacts that show up as My Card in my contacts. One is me and the other is my wife. I can not remove the designation from my wife's contract. If I click on my own contact and click on "Make This My Card", it will momentarily remove the designation from my wife's card. But it comes back after a moment or two.
Anyone know how I can remove this without deleting my wife as a contact?Please test after taking each of the following steps. Back up all data before you begin.
Step 1
Quit the Contacts or Address Book application if it's running.
Triple-click anywhere in the line of text below on this page to select it:
~/Library/Caches/com.apple.AddressBookSourceSync
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash.
Repeat with this line:
~/Library/Containers/com.apple.AddressBook
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 2
If you use iCloud, uncheck the box marked Contacts in the iCloud preference pane. Press return to confirm, or click Keep on Mac in the dialog that opens.
If you synchronize contacts with any other network service, disable that synchronization in the Internet Accounts preference pane.
Step 3
This step applies only if you can launch Contacts. From the list of groups on the left side of the Contacts window, select All On My Mac. If that group doesn't exist or is empty, skip this step. Otherwise, from the menu bar, select
File ▹ Export... ▹ Contacts Archive...
Save the exported archive to the Desktop.
Step 4
Quit Contacts if it's running. Reveal the following item in the Finder as you did in Step 1:
~/Library/Application Support/AddressBook
If you know when the problem started, and you can restore that folder from an earlier backup without losing any contacts, do so and test. Otherwise, move the folder to the Desktop, leaving the window open for now.
Step 5
Launch Contacts. Your contacts and groups will be gone. If you took Step 3, then double-click the file you created in that step and confirm that you want to import from it. Your contacts and groups will reappear.
Step 6
If you took Step 2, reverse it. Test. If the issue is resolved, delete the AddressBook folder and the archive file on the Desktop and close the open folder window.
Otherwise, quit Contacts again and put the AddressBook folder back where it was, overwriting the newer one that will have been created in its place.
Step 7
Go back to Step 3, but this time choose Export vCard... from the Export menu. Continue as in Steps 4-6. All contacts should be preserved, but you may lose some metadata such as group membership. -
I am unable to buy any of applications on App Store as it is not accepting any of cards and doesnot show option for credit card.
ThanksTry this to change your payment method: http://support.apple.com/kb/PH12507
-
I bought the iPhone4 in the apple store. Why iTunes shows that the SIM card isn't inserted when I connect to the compter? But I have inserted the SIM card.
Even if I inserted another SIM card which can work nomally in other‘s iPhone, it still doesn't work in my iPhone. So I think the problem isn't because of the SIM card.bwowWhere did you buy it? And was it connected to a carrier?
-
TS1702 What was the purchase I made that showed on my credit card?
What was the purchase I made that showed on my credit card?
We are fellow users, we won't know. You can check the purchase history on your account via the Store > View Account menu option on your computer's iTunes, though I'm not sure if that shows auto-renewing subscriptions. If you can't find the charge or don't recognise it, and you haven't added or changed your credit card details (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) then you can contact iTunes Support via this page and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Movie titles not showing up on SD card. TX with PQDVD
Hi all, I am a new Palm TX user and have already gleaned much useful info from these forums. I have purchased the PQDVD video program and it works fine except for one small quirk. The movie titles do not show up on my SD card they way they do when i view the files on my computor. Instead I get a generic black and white still of a peice of movie film and I have to start the movie to see which one it is. Once started the movies play fine on the TX. I am using a windows computor running XP home edition. I download the files using quick install.
Thanks,
pyrate
Post relates to: Palm TXWhat program are you using to view the movies? Media? TCPMP, as recommended many times here?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
MAX doesn't show the installed IMAQ card 1422,1424,1428
After successfully installing the IMAQ cards 1428, 1424 and 1422 in the PC, they doesn't appear in either MAX or VIsion builder. I checked with other PCs and other slots but it is the same case in every PC. In the device manager, the card is shown as NI IMAQ card with the NI logo.
You may want to try the following suggestions in the order in which I wrote them, however I would like to point out just in case you installed all the boards at the same time, please make sure that you install one board at a time and that it works fine in MAX, if board 1 works, then install board 2, and so on. I've seen problems when installing multiple boards at the same time.
Suggestions:
1. Open MAX, go to view>>refresh or press F5 and then check under 'Devices and Interfaces'. If that does not works then go to Device Manager of Windows and make sure that under the 'National Instruments IMAQ Interfaces' list each board has its name, like 1428, etc. If they do then go ahead and check the properties of the driver and click the 'update driver' button, follow the automa
tic procedures, and have the computer re-assign the driver. If they do not show the name of the interface like PCI-1428 then something might be wrong with the driver you are installing, download NI-IMAQ 2.5.1 from our website and then update it to 2.5.5.
2. if '1' did not work. Close MAX. Please go to C:\Program Files\National Instruments\MAX and delete the file named 'config.mxs'. Restart MAX.
3. If '2' did not work, then to the same but reboot the computer before restarting MAX.
4. If '3' did not work, then shutdown the computer, take all your IMAQ boards out, reboot computer and go to Start >> Settings >> Control Panel >> Add/Remove Software >> NI-IMAQ, click the 'change' button and select 'reinstall', before pressing this button you should select 'reinstall mode' to the bigger one. After reinstalling the software, reboot the computer, so registries will be taken care of, then shutdown and install only one board. If it works in MAX then install the second one and so on.
Hope t
his helps.
Nestor.
Nestor
National Instruments -
LR not showing all images on card during Import
I have the latest version of LR. iMac and Canon 7D. With my camera tethered directly to my computer, I start the Import Photos process. When the thumbnails begin to load, it seems like if I have a large amount of photos to import (from 8GB card), it always leaves off the last hundred or two (approximately). They just don't show up. I'll import what is visible, then go back and do another import immediately. All the ones that have been imported show up as greyed out thumbnails, then the remaining images on card will be avavilable for Import.
Why is Lightroom not seeing all the images the first time??Yes it is.
http://micechat.com/forums/blogs/weekend-update/1532-wizarding-world%3B-toy-stor y-3%3B-main-street-disneyland-hong-kong%3B-classic-revolution.html
Safari is unable to load any more images, works fine on the desktop, but not on the iPad. -
LR3 does not show source from CF card reader
I am new to LR3 and this is driving me crazy. I do not see the source for pics to import into LR3 from a CF card reader. CF card was formatted in camera prior to exposure. Does it matter if card reader is first plugged into Mac (OS X Lion) before turning Mac on or should Mac be turned on first and then have CF reader connected. I suspect either action is irrelevant as the Mac should recognize the CF reader either way. I have Scott Kelby's LR3 book but it does not cover situations such as the above. Can someone show me a few steps to take? Example such as: go to XX, next click or select XX, etc.
I might add that I also have a PC running on Windows Vista and the CF card reader downloads OK on my screen (LR3 not installed on the PC). I assume that once formatted in camera, card is clean and is accepted by either OS. So I am confused. Any help is appreciated.I am new to LR3 and this is driving me crazy. I do not see the source for pics to import into LR3 from a CF card reader. CF card was formatted in camera prior to exposure. Does it matter if card reader is first plugged into Mac (OS X Lion) before turning Mac on or should Mac be turned on first and then have CF reader connected. I suspect either action is irrelevant as the Mac should recognize the CF reader either way. I have Scott Kelby's LR3 book but it does not cover situations such as the above. Can someone show me a few steps to take? Example such as: go to XX, next click or select XX, etc.
I might add that I also have a PC running on Windows Vista and the CF card reader downloads OK on my screen (LR3 not installed on the PC). I assume that once formatted in camera, card is clean and is accepted by either OS. So I am confused. Any help is appreciated.
Maybe you are looking for
-
I have all my media on an external drive for space. Is there a way I move the library file back to my internal had drive so that Timemachine will keepa backup of the file. Recently my library file became damaged and I lost all my playlists and playc
-
How do I remove photo stream pop-up request to download my files?
My preferences say no pop-ups, why the constant photo stream request to download my photo files?
-
Bad bind var compile time err in OracleSpreadTable ActiveX
I'm interested to learn the implementation procedures for using ActiveX into Forms 6i applications. How to do I go about OracleSpreadTable? I have given it a try; but, found some bad bind variable error while tried to compile. Steps that I followed:
-
How to call a TOC of a differant help file
Hi, I have two help projects, I want to call the TOC of the second helpfile in the first. I got to know merging files will solve the problem, but is there any other options...
-
Adding a priority to a work item
hi i have created a priority field in the customised table.i need to tranfer that to workflow.I need to make changes in the ATTRIBUTE program.can anyone help me how to go with the code in Attribute program. I need to 'get parameter' write a select st