SNMP versions supported by WL 6.1

I can't find the SNMP versions supported by WLS 6.1. Anyboddy has this
information?
Thanks, Philippe

wls61 supports snmp version 1.
cheers,
mihirk
Philippe Fajeau wrote:
I can't find the SNMP versions supported by WLS 6.1. Anyboddy has this
information?
Thanks, Philippe

Similar Messages

SNMP versions supported by Tuxedo

I am trying to find out which SNMP versions are supported by Tuxedo versions 6.5, 7.1 and 8.0. I can't find that anywhere on the Web site. Could you please help?
Thanks,
Jacek Ziabicki

wls61 supports snmp version 1.
cheers,
mihirk
Philippe Fajeau wrote:
I can't find the SNMP versions supported by WLS 6.1. Anyboddy has this
information?
Thanks, Philippe

Cisco ISE 1.2 and Cisco ACS 5.4 patch 6 and support for snmp version 3

does anyone know if cisco ISE version 1.2 patch 8 and Cisco ACS 5.4 patch 6 support snmp version 3?
ciscoISE/admin(config)# snmp-server ?
community Set community string
contact    Text for mib object sysContact
host       Specify hosts to receive SNMP notifications
location   Text for mib object sysLocation
ciscoISE/admin(config)# snmp-server
Ciscoacs/admin(config)# snmp-server ?
community Set community string
contact    Text for mib object sysContact
host       Specify hosts to receive SNMP notifications
location   Text for mib object sysLocation
Ciscoacs/admin(config)# snmp-server

No support SNMP v3 on ISE v1.2 and 1.3 except for profilling
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/cli_ref_guide/ise_cli/ise_cli_app_a.html#12768
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/cli_ref_guide/b_ise_CLIReferenceGuide/b_ise_CLIReferenceGuide_chapter_0100.html#ID-1364-00000d30

Windows server edition/version supports installation of ERP 6.0

Hi ,
I am trying to install Solution manager 7.0 ,ERP 6.0. on windows OS.
and Oracle database.
My OS : Microsoft windows XP Proffessional version 5.1 service pack 3 (32 bit)
RAM Size : 2 GB
Could anyone give me the hardware and software requirements for installations of solution manager 7.0 and ERP 6.0. on windows.
which windows server edition/version supports installation of SOL MAN 7.0 and ERP 6.0 ?
thanks.

> Does Microsoft windows2008 server edition / windows 7/vista supports installation of ERP 6.0 .
Did you have a look at the PAM as suggest at http://service.sap.com/pam?
Vista/Windows 7 are client operating systems and are not supported for ERP 6.0 or Solution Manager or any other backend.
Markus

What's the postscript version supported by Preview

Can anyone please help me with postscript version supported by Mac Previewer V 6.0.1

Postscript version of what - a font?

Has anyone got dynamic version support to work with the HTML converter?

I have tried this for some time and followed all the guidelines, but it still don't work. Could someone post the HTML-code for a working applet that is converted with dynamic version support ?

Using 1.4.1_03
java -jar htmlconverter.jar -gui
selected directory, "Standard" template file, "Use any Java 1.4, or higher"
<html>
<body>


<OBJECT
    classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
    WIDTH = 200 HEIGHT = 100
    codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4-win.cab#Version=1,4,0,0">
    <PARAM NAME = CODE VALUE = Version.class >
    <PARAM NAME="type" VALUE="application/x-java-applet;version=1.4">
    <PARAM NAME="scriptable" VALUE="false">
    <COMMENT>
     <EMBED
            type="application/x-java-applet;version=1.4"
            CODE = Version.class
            WIDTH = 200
            HEIGHT = 100
         scriptable=false
         pluginspage="http://java.sun.com/products/plugin/index.html#download">
             <NOEMBED>
          </NOEMBED>
     </EMBED>
    </COMMENT>
</OBJECT>


</body>
</html>

Blackbarry and Iphone versions supported by MSA

Hi Folks,
Any idea about the latest versions of Blackbarry and Iphone versions supported by Oracl MSA.
Your eralier response would be appreciated.
Thanks,
Mayank

Hi
Please visit below URL to get more information on MSA. You will get required information.
http://crmondemand.oracle.com/en/products/mobile/8271_EN
Below is extract from there :
Blackberry...
Oracle Mobile Sales Assistant supports the following BlackBerry devices running BlackBerry OS 4.2,
4.3, 4.5, 4.6, 4.7, and 5.0:
■ BlackBerry models 8700, 8700c, 8700g, 8700r, 8703e, 8705g, 8707g, 8800, 8820, and 8830
■ BlackBerry Bold model 9000
■ BlackBerry Curve models 8300, 8310, 8320, 8330, 8350, 8520, 8530, and 8900
■ BlackBerry Pearl models 8100, 8110, 8120, 8130, and 8220
■ BlackBerry Storm and Storm2 models 9500, 9530, and 9550
■ BlackBerry Tour model 9630
Oracle Mobile Sales Assistant accesses data from the following sources:
■ Native Personal Information Manager (PIM) data; that is, the contact, calendar, and task data on
your BlackBerry device
■ Oracle CRM On Demand, Release 15 or later
I Phones...
Oracle Mobile Sales Assistant supports the Apple iPhone, Apple iPhone 3G, and Apple iPhone 3GS
running iPhone OS 3.0 or later.
Regards
VK

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

For CRM 5.0 what is the ECC version supported

Hi,
Can any one help on this
For CRM 5.0 what is the ECC version supported?

ECC 5.0 onwards,
lower versions can also be integrated using some plug-ins
hope this helps
additional info:
SAP ECC 6.0 and subsequent releases will automatically contain all integration interfaces that so far have been contained in the SAP R/3 Plug-In and that ensured the technical integration with other SAP Components.
Customers who run SAP R/3 4.6C, SAP R/3 Enterprise 47x100 and 47x200, and SAP ECC 5.0 will receive additional integration interfaces in a Support Package for PI 2004.1. The delivery of this Support Package will be synchronized with that of mySAP Business Suite. The 2005 delivery is in November as part of Support Package 10. Information about the delievery from 2006 onwards are take place here
This rule applies only for customers with a SAP R/3 Plug-In release PI 2004.1. Customers with PI 2003.1 or older must first upgrade to PI 2004.1 or SAP ECC 6.0.
No new interfaces will be provided for integration between new SAP component releases and SAP R/3 3.1I to 4.6B.
Message was edited by: RH

Which IOS version supported EEM?

Hi
May I know which IOS version supported EEM (Embedded Event Manager) ?
we are using 2960 and 3750. Does c2960-lanbasek9-mz.150-2.SE5/c2960-lanbase-mz.122-35.SE5 support?
hugo

EEM supported on 3750:-
http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-614546.html
But as leo said its not on 2960.

SAP Netweaver ABAP version supports JAVA?

Hi all,
Im using SAP Netweaver ABAP sp12 version. Is this version supports JAVA applications to deploy on it?
With Regards,
Sreehari

Hello Sree,
If u want your java applications to run in your system then you should have Java AS too. you can install Java AS as an Add-on installation and u can find a lot of materials for this thro sdn as well as help.sap.com
regards,
Anand

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
Thanks

Hi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

How do I make Read and Write 10 Gold work with Firefox? I have the latest Firefox 10.0.1 but it keeps saying "Please upgrade your version of Mozilla Firefox. The minimum version supported by Read&Write is version 3.0."

I just loaded Moxilla Firefox on my Windows 7 PC today and tried to use my Read and Write 10 Gold text help software but it just does not seem to work with this browser (works fine on Internet Explorer) as it keeps saying "Please upgrade your version of Mozilla Firefox.
The minimum version supported by Read&Write is version 3.0." but this versions is higher than 3.0!

We have a solution available for anyone needing to run Firefox 10 with Read&Write v10 Gold, please email us directly for this temporary resolution- [email protected]

"New Version Support" -- What is it?

In the Administration -> System section of WLSE 2.9, theoretically this is a section to upload new firmware support for APs. Unfortunately, I don't know what this section is looking for. Every TAR file I try to upload comes back with the same message: "Invalid Tar file, make sure original file has not been modified." The Help document for this page points you to a CCO page that doesn't seem to have anything that works either. Thanks in advance for your help.

The purpose of this screen is so that if there is a new device/version support comes out and it's support need to be added to WLSE, then a respective tar file will be posted on CCO which can be then downloaded and added via this option. You cannot just upload any IOS image tar file here as it will not work.

SNMP versions supported by WL 6.1

Similar Messages

Maybe you are looking for