SNOTE: Internal error parent is missing
Hi,
I'm working with an IDES 6.0 EHP4 system.
I want to reset SAP note 992493 because it is obsolete.
After the classic popup 'SAP Note obsolete, will be deimplemented', the Note Assistant issues the following message: 'Internal error parent is missing in CLM_CWB_SMIM_GET; inform person responsible'.
Known Note Assistant bugs are already corrected by application of SAP note 875986.
Any idea how to solve this error ?
Thanks in advance !
Christophe
Hello Christophe,
I have just the same Problem. Can anyone help? SAP notes are not referenced to this issue.
Regards,
Alexander
Similar Messages
-
SCWN200 "Internal Error" , Transaction SNOTE - Upload SAP Note 1530700
i have a problem with the upload of note 1530700.
(Transaction snote-Upload sap note)
There comes the error SCWN200 "internal error"
regards siegbHi Siegbert Kögel,
Can you double click on any existing SAP note in SNOTE and see if you get the same error.
Regards
Rajvansh -
SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]
Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint -
Error 0000: internal error with Apply Transform Module
Hello:
I get an internal error message when attempting to use a previously saved data transform (namely missing value processing using MICE). What is strange is that using the previously saved model works if I feed the exact same data that was used for training
it but generates an internal error whenever I use a sample - even a 90% sample of the original. This is the output log:
Record Starts at UTC 04/02/2015 10:30:53:
Run the job:"/dll "Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform" /Output0 "..\..\Transformed dataset\Transformed dataset.dataset" /transform "..\..\Transformation\Transformation.itransform" /data "..\..\Dataset\Dataset.dataset" "
Starting Process 'C:\Resources\directory\870595a63cd0452da2f3767b831099d7.SingleNodeRuntimeCompute.Packages\AFx\6.2\DllModuleHost.exe' with arguments ' /dll "Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform" /Output0 "..\..\Transformed dataset\Transformed dataset.dataset" /transform "..\..\Transformation\Transformation.itransform" /data "..\..\Dataset\Dataset.dataset" '
[ModuleOutput] DllModuleHost Start: 1 : Program::Main
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleDescriptionParser::ParseModuleDescriptionString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::DllModuleMethod
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::Execute
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::BindModuleMethod
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodDescription Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule;ApplyITransform
[ModuleOutput] DllModuleHost Verbose: 1 : assemblyFullName Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::LoadModuleAssembly
[ModuleOutput] DllModuleHost Verbose: 1 : Trying to resolve assembly : Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Verbose: 1 : Loaded moduleAssembly Microsoft.Analytics.Modules.ApplyITransform.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : moduleTypeName Microsoft.Analytics.Modules.ApplyITransform.Dll.ApplyITransformModule
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodName ApplyITransform
[ModuleOutput] DllModuleHost Information: 1 : Module FriendlyName : Apply Transformation
[ModuleOutput] DllModuleHost Information: 1 : Module Release Status : Release
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Start: 1 : ParameterArgumentBinder::InitializeParameterValues
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos count = 2
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[0] name = transform , type = Microsoft.Analytics.MachineLearning.ITransform`2[Microsoft.Numerics.Data.Local.DataTable,Microsoft.Numerics.Data.Local.DataTable]
[ModuleOutput] DllModuleHost Start: 1 : DotNetSerializationHandler::HandleArgumentString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[1] name = data , type = Microsoft.Numerics.Data.Local.DataTable
[ModuleOutput] DllModuleHost Start: 1 : DataTableDatasetHandler::HandleArgumentString
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Verbose: 1 : Begin invoking method ApplyITransform ...
[ModuleOutput] InputDataStructure
[ModuleOutput]
[ModuleOutput] {
[ModuleOutput] "InputName":Dataset
[ModuleOutput] "Rows":385338
[ModuleOutput] "Cols":105
[ModuleOutput] "ColumnTypes":System.Nullable`1[System.Double],99,System.Nullable`1[System.Int32],5,System.String,1
[ModuleOutput] }
[ModuleOutput] DllModuleHost S[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Source array was not long enough. Check srcIndex and length, and the array's lower bounds.
Module finished after a runtime of 00:00:27.6131405 with exit code -2
Module failed due to negative exit code of -2
Record Ends at UTC 04/02/2015 10:31:38.
Experiment URL:
https://studio.azureml.net/Home/ViewWorkspace/ffac4490b5e448fa8778ceadc74a0b97?#Workspaces/Experiments/Experiment/ffac4490b5e448fa8778ceadc74a0b97.f-id.0c2caa16ad4b46b08449bcfaf4a71e57/ViewExperiment
Thanks for your helpIt's pretty clear no-one at Microsoft is interested in answering this on this forum. With a paid subscription plan would I be able to get a response for these types of incidents/follow up questions? You know - so I can stop throwing money away
running experiments with modules that haven't been fixed in almost a month in hope that magically they will start to work some day... -
"Internal error (-5002) occurred" On Pick List Update Picked Quantity
Hi Experts,
I have an SDK program that simply tries to update the Picked Quantity in SAP. Previously it has been working fine, until I try to use the same logic for items managed by Batch or Serial Number.
In this scenario, I have created a PickList with only 1 row, the item is managed by Serial Number.
I try to simplify the code as below.
Dim oBaseDocument As SAPbobsCOM.PickLists
oBaseDocument = oComp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPickLists)
BaseDocument.GetByKey(12345)
oBaseDocument.Lines.SetCurrentLine(0)
oBaseDocument.Lines.PickedQuantity += 1
oBaseDocument.Lines.BinAllocations.Add()
oBaseDocument.Lines.BinAllocations.SetCurrentLine(0)
oBaseDocument.Lines.BinAllocations.BinAbsEntry = CInt(sBinAbsEntry)
oBaseDocument.Lines.BinAllocations.Quantity += dXML_Quantity
oBaseDocument.Lines.SerialNumbers.InternalSerialNumber = sXML_BatchSerialNo ' <--- ***
lRet = oBaseDocument.Update
I have added the *** line for handling the Serial Number, but when it hit the Update command, the SDK returns "Internal error (-5002) occurred".
I'm not sure what does it means.
Anyway I tried to remove the *** line and it works fine for item not managed by Batch or Serial, but the issue will remains for the Items managed by Serial or Batch.
Please advise whether I missed anything in this code.
Thank you in advance.
Best Regards,
KrismaHi Krisma,
I haven't done this thing practically but error -5002 will occur, if there is any Invalid Object.
You can check it accordingly.
Hope it helps.
Thanks & Regards
Ankit Chauhan -
Internal Error when Exporting to PDF
Hello all,
I have created a report in SSRS 2008. My report was running fine until I inserted an extra row. Once I would insert this row,(no matter where I insert it) whenever I try to view the print layout or export to a PDF I get the following error:
"An internal error occured on the report server. See the error log for more details. (rsInternalError)"
Checking the error log I found this:
library!ReportServer_0-90!12f4!01/09/2015-07:46:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: ScalableList: Index -1 outside the allowed range [0::5], Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details.;
I have researched a great deal to try to figure out what could be causing this problem. I found several threads that had a similar problem and their solution was to set all "Hide Duplicates" properties to "None." I have checked several
times and my report has all it's "Hide Duplicates" properties set to "none."
Does anyone have any idea what could be causing this error?
Thanks,
SarahI found out what was causing the error in my report.
When the original report was created, a parent group was created. When a parent group is created, SSRS automatically adds an extra column with whatever it’s child group was grouped by inside of it. When this column was created, instead of deleting the text
inside the column or deleting the column, the column was made so small that you almost couldn’t tell it was there. I did not realize it was there until today. Since SSRS is pretty picky, it did not like that column.
You could do 3 things to get rid of the error:
Delete the column
Delete the text inside of the column
Expand the column so that the text inside it is visible
I tested all 3 approaches by adding 25 extra rows after applying the solution and all would export to a PDF just fine.
So basically if anyone out there happens to have the same issues I had, check and make sure you don't have any extra columns hiding anywhere. Hopefully this can help someone someday!
-Sarah -
Hi,
running SQL*Loader (Release 8.1.7.2.1) causes an error "SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]". This error occurs when SQLLoader is trying to load several thousand records into a database table. Each record is less than 250 bytes in length.
Any idea what could cause the problem?
Thanks in advance!
Ingo
And here's an extract from the log file generated by SQLLoader :
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 1360 rows, maximum of 10485760 bytes
Continuation: none specified
Path used: Conventional
Table "SYSTEM"."BASICPROFILE$1", loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
UUID FIRST * O(X07) CHARACTER
DOMAINID NEXT * O(X07) CHARACTER
LASTMODIFIED NEXT * O(X07) DATE DD/MM/YYYY HH24:MI:SS
ANNIVERSARY NEXT * O(X07) CHARACTER
BIRTHDAY NEXT * O(X07) CHARACTER
COMPANYNAME NEXT * O(X07) CHARACTER
DESCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAME NEXT * O(X07) CHARACTER
COMPANYNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
GENDER NEXT * O(X07) CHARACTER
HOBBIES NEXT * O(X07) CHARACTER
HONORIFIC NEXT * O(X07) CHARACTER
JOBTITLE NEXT * O(X07) CHARACTER
KEYWORDS NEXT * O(X07) CHARACTER
LASTNAME NEXT * O(X07) CHARACTER
LASTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
NICKNAME NEXT * O(X07) CHARACTER
PREFERREDLOCALE NEXT * O(X07) CHARACTER
PREFERREDCURRENCY NEXT * O(X07) CHARACTER
PROFESSION NEXT * O(X07) CHARACTER
SECONDLASTNAME NEXT * O(X07) CHARACTER
SECONDNAME NEXT * O(X07) CHARACTER
SUFFIX NEXT * O(X07) CHARACTER
TITLE NEXT * O(X07) CHARACTER
CONFIRMATION NEXT * O(X07) CHARACTER
DEFAULTADDRESSID NEXT * O(X07) CHARACTER
BUSINESSPARTNERNO NEXT * O(X07) CHARACTER
TYPECODE NEXT * O(X07) CHARACTER
OCA NEXT * O(X07) CHARACTER
SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]As a second guess, the terminator changes or goes missing at some point in the data file. If you are running on *NIX, try wc -l data_file_name. This will give a count of the number of lines (delimited by CHR(10) ) that are in the file. If this is not close to the number you expected, then that is your problem.
You could also try gradually working through the data file loading 100 records, then 200, then 300 etc. to see where it starts to fail.
HTH
John -
ORA-00607: Internal error occurred while making a change to a data block
hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start databaseDuh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC -
An internal error has occurred in the secLdap plugin - CR XI (Login to Ent)
Hi,
We recently changed the authentication type on BO XI R2 Enterprise from Enterprise to LDAP mode and have been able to add and configure all the LDAP groups. We know that the authentication is successful as users have been able to successfully login via the Infoview/CMC.
However, we are facing a problem from certian workstations (for example mine) when ever we try to login to BO Enterprise via the Crystal Reports XI client thorough LDAP as it gives the error 'An internal error has occurred in the secLdap plugin'. (PS: The Enterprise Authentication mode works) From what I have understood that this error is workstation specific as the same login is successfull from another workstation.
The CR XI client on all the workstations are of the same version (11.0.0.1282) but the Windows Updates differs. For e.g.: I have Windows XP SP 3 (with the latest of the updates with IE 8)
Is there any updates to CR XI Client to solve this issue or am I missing something here?Your client is CR R1, your server is XI R2. This is a known bug. To fix you need BOE XIR1 SP3 or above. I'm not sure this was fixed in a CR service pack. Sorry I can't find a link for that right now.
Or use [this link|http://resources.businessobjects.com/support/additional_downloads/service_packs/crxir2.asp] to get CR R2, uninstall CR R1, and replace with CR R2. NOTE: they should still use the same license keys. If using CR to XIR2 you should always keep the same version so this is the preferred method.
Regards,
Tim -
ORA-00600: internal error code, arguments: [17119]
Hi Techies,
I've got a lot of ORA-00600: internal error code, arguments: [17119] showing in my alertlogs and trace files. Users were unable log on, sunsequently the database crashed.
has anyone come accross such events and how was it solved? There are no activities that I can pin point to the time of occurance.
Extract of the trace file is as follows:
*** SERVICE NAME:(SYS$BACKGROUND) 2009-09-10 15:14:56.386
*** SESSION ID:(293.34537) 2009-09-10 15:14:56.386
********** Internal heap ERROR 17119 addr=(nil) *********
HEAP DUMP heap name="" desc=0x2112183f0
extent sz=0x11218990 alt=19392 het=0 rec=0 flg=0 opc=0
parent=0x25eac5898 owner=0x2112182f8 nex=(nil) xsz=0x0
Hla: 1
*** 2009-09-10 15:14:56.386
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [17119], [0x000000000], [], [], [], [], [], []
No current SQL statement being executed.
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst()+31 call ksedst1() 000000000 ? 000000001 ?
7FBFFF8430 ? 7FBFFF8490 ?
7FBFFF83D0 ? 000000000 ?
ksedmp()+610 call ksedst() 000000000 ? 000000001 ?
7FBFFF8430 ? 7FBFFF8490 ?
7FBFFF83D0 ? 000000000 ?
ksfdmp()+21 call ksedmp() 000000003 ? 000000001 ?
7FBFFF8430 ? 7FBFFF8490 ?
7FBFFF83D0 ? 000000000 ?
kgeriv()+176 call ksfdmp() 000000003 ? 000000001 ?
7FBFFF8430 ? 7FBFFF8490 ?
7FBFFF83D0 ? 000000000 ?
kgesiv()+119 call kgeriv() 006618F40 ? 006680C70 ?
000000000 ? 000000000 ?
7FBFFF83D0 ? 000000000 ?
kgesic1()+155 call kgesiv() 006618F40 ? 006680C70 ?
0000042DF ? 000000001 ?
7FBFFF91B0 ? 000000000 ?
kgherror()+986 call kgesic1() 006618F40 ? 006680C70 ?
0000042DF ? 000000002 ?
000000000 ? 000000001 ?
kghpih()+106 call kgherror() 006618F40 ? 2112183F0 ?
0000042DF ? 000000000 ?
000000000 ? 000000000 ?
kghfex()+49 call kghpih() 006618F40 ? 2112183F0 ?
000000001 ? 000000000 ?
000000000 ? 000000000 ?
kghfrx()+42 call kghfex() 006618F40 ? 2112183F0 ?
000000001 ? 000000000 ?
000000000 ? 000000000 ?
kghfrunp()+2456 call kghfrx() 006618F40 ? 2112183F0 ?
000000001 ? 000000000 ?
000000000 ? 000000000 ?
kghfnd()+1042 call kghfrunp() 006618F40 ? 06003C460 ?
000001000 ? 06003DB50 ?
06003DCB8 ? 000000000 ?
kghalo()+587 call kghfnd() 006618F40 ? 000000018 ?
06003C460 ? 0600222E0 ?
000001000 ? 000000000 ?
kghgex()+598 call kghalo() 000000000 ? 06003C460 ?
000000FE8 ? 000000FE8 ?
000001000 ? 000001000 ?
kghfnd()+667 call kghgex() 006618F40 ? 000000000 ?
25DAA9998 ? 000002000 ?
25DAA99E4 ? 000000000 ?
kghalo()+587 call kghfnd() 006618F40 ? 000000000 ?
25DAA9998 ? 000000FD8 ?
2A00000FD8 ? 000000000 ?
kghgex()+598 call kghalo() 000000000 ? 25DAA9998 ?
000000FA8 ? 000000FA8 ?
000000FD8 ? 000000FD8 ?
kghalf()+521 call kghgex() 006618F40 ? 000000000 ?
17A7A79B0 ? 000003000 ?
17A7A79FC ? 000000000 ?
kghalp()+3013 call kghalf() 006618F40 ? 17A7A79B0 ?
000000038 ? 000000001 ?
000000000 ? 0059A9404 ?
qcsAddSqlPath()+107 call kghalp() 006618F40 ? 17A7A79B0 ?
Any helps would be grately appreciative.
Kind Regards
Newbie..Go to metalink and use the ORA-600 lookup table, if nothing help, then open a SR to get help from Oracle support.
Nicolas. -
Internal Error when adding Invoice from DI-API
Hello All,
I am trying to add an invoice using DI-API. I hv populated the object using XML and than adding it. Upon adding the error Internal Error (-10) is coming. I hv checked everything but am certainly missing something. Following is the XML of the invoice and the code to add it
<?xml version="1.0" encoding="utf-16" ?>
<BOM>
<BO>
<AdmInfo>
<Object>13</Object>
<Version>1</Version>
</AdmInfo>
<OINV>
<row>
<U_EntryId>1</U_EntryId>
<DocType>I</DocType>
<DocDate>20110923</DocDate>
<DocDueDate>20111023</DocDueDate>
<CardCode>JM0004</CardCode>
<CardName>GAYAN BHARTI</CardName>
<NumAtCard></NumAtCard>
<DiscPrcnt>0.000000</DiscPrcnt>
<DocTotal>755.000000</DocTotal>
<Comments></Comments>
<U_BranchTrans>1</U_BranchTrans>
<SlpCode>-1</SlpCode>
<IsICT>N</IsICT>
<Series>40</Series>
<TaxDate>20110923</TaxDate>
<TrackNo></TrackNo>
<SeqCode>0</SeqCode>
<U_SlpName></U_SlpName>
<U_WebCreated>N</U_WebCreated>
<U_Territory></U_Territory>
<U_InvType>C</U_InvType>
</row>
</OINV>
<INV1>
<row>
<ItemCode>A003</ItemCode>
<Dscription></Dscription>
<Quantity>5.000000</Quantity>
<DiscPrcnt>0.000000</DiscPrcnt>
<WhsCode>JSP-FG</WhsCode>
<PriceBefDi>11.000000</PriceBefDi>
<TaxCode>NonTax</TaxCode>
<U_WebCreated>N</U_WebCreated>
<U_RetQty></U_RetQty>
<U_SaleQty></U_SaleQty>
<U_LineType>S</U_LineType>
</row>
<row>
<ItemCode>A005</ItemCode>
<Dscription>Ace Visual Dictonary 2</Dscription>
<Quantity>10.000000</Quantity>
<DiscPrcnt>0.000000</DiscPrcnt>
<WhsCode>JSP-FG</WhsCode>
<PriceBefDi>70.000000</PriceBefDi>
<TaxCode>NonTax</TaxCode>
<U_WebCreated>N</U_WebCreated>
<U_RetQty></U_RetQty>
<U_SaleQty></U_SaleQty>
<U_LineType>S</U_LineType>
</row>
</INV1>
</BO>
</BOM>
Program Code to add
Dim oSapObject As SAPbobsCOM.Documents
oCompany.XMLAsString = True
oSapObject = oCompany.GetBusinessObjectFromXML(Body, 0)
If oSapObject.Add <> 0 Then
Throw New Exception(oCompany.GetLastErrorDescription & " [" & oCompany.GetLastErrorCode & "]")
End If
Any help would be greatly appreciated. This is sort of urgent and needs to be done immediately.
Regards,
Rahul Jain
PS: The error is coming on oSapObject.Add - it is able to read the invoice from XML, the error comes when trying to add it. All relevant values mentioned in XML are present in the database, and I am able to add an Invoice from the UI.
Edited by: Rahul Jain on Sep 24, 2011 1:29 PMI realize this might not be to much help but everytime I have ever gotten an internal error code it has always turned out to be a SQL error. For instance there could be something in transaction notification that doesnt jive with your submission or something along those lines. Perhaps you could try a more simplified invoice as a test such as just send one item with a price and no UDFs .
Sorry if that is not much help. -
10.8.2: FaceTime + Messages: internal error, won't start
Hello.
I've installed the 10.8.2 update and now I can't use FaceTime or Messages anymore. They won't even start up.
I always get this error message telling me that some internal error has occured and I need to quit and reopen the application.
I really need FaceTime and Messages on a daily basis. So this is a nightmare!
Before the update everything worked fine.
Every ten seconds(!) or so a new crash report is generated because some process called imagent crashed.
Here's the beginning of two crash reports:
Process: imagent[1120]
Path: /System/Library/PrivateFrameworks/IMCore.framework/imagent.app/Contents/MacOS/i magent
Identifier: imagent
Version: 8.0 (900)
Code Type: X86-64 (Native)
Parent Process: launchd [159]
User ID: 502
OS Version: Mac OS X 10.8.2 (12C54)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Symbol not found: _OBJC_CLASS_$_IMInvocationForwarder
Referenced from: /System/Library/PrivateFrameworks/IMCore.framework/imagent.app/Contents/MacOS/i magent
Expected in: /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n
in /System/Library/PrivateFrameworks/IMCore.framework/imagent.app/Contents/MacOS/i magent
and then one from FaceTime itself:
Process: FaceTime [357]
Path: /Applications/FaceTime.app/Contents/MacOS/FaceTime
Identifier: com.apple.FaceTime
Version: 2.0 (1080)
Build Info: FaceTime-1110000000000000~1
Code Type: X86-64 (Native)
Parent Process: launchd [160]
OS Version: Mac OS X 10.8.2 (12C54)
Report Version: 10
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Symbol not found: _IMCopyURLEscapedString
Referenced from: /System/Library/PrivateFrameworks/FTServices.framework/Versions/A/FTServices
Expected in: /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n
in /System/Library/PrivateFrameworks/FTServices.framework/Versions/A/FTServices
[I didn't include the large part of the crash reports called Binary Images to keep this post short but I'm more than happy to do so if it's essential.)
What I have tried so far (without accomplishing anything at all):
- installed the 10.8.2 combo updater on top of everything
- deleted all preference files in my home library related to the imagent, ichat, FaceTime and Message (incl. the ByHost folder). And incl. the Cache folder.
- deleted all keys/entries in my key chain that are/seem related to FaceTime, Messages & imagent
- created a new admin user and tried to start FaceTime/Messages using this account
- I even repaired permissions (even thought this didn't look like a permissions issue).
I'm really quite frustrated as I can't seem to repair this.
I hope somebody reads this and knows just what I need to do to get FT & Message going again. That would be so much appreciated.
Thank you.Hi,
IMAgent is a support app tucked away on the "System" side of things that helps with Messages (or iChat 6 in Lion) and the FaceTime App.
Basically what it does is Login the accounts and "Listen" for Off Line IMs and calls
For Messages it will start up the App if a Messages is sent to any of your IDs or Screen Names.
For FaceTime it will start up the app if someone calls you.
It is this IMFoundation item that you need to be "reinstalling"
Expected in: /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n
If this is the file you "replaced" I would do a Mountain Lion Recovery and reinstall the whole OS.
11:37 PM Friday; September 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
While creating Goods Receipt for multiple serial numbers it is generating an internal error
Error:Internal error (-5002) occurred [ 131-183]
we are using version SAP B1 9.0 PL 4
The code which we are using.
Dim oPDN As SAPbobsCOM.Documents
oPDN = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
Dim serno As String = "SH-A1,SH-A2"
Dim sernoval As String() = serno.Split(",")
Dim mnfser As String = "SH-B1,SH-B2"
Dim mnfserval As String() = mnfser.Split(",")
For k = 0 To sernoval.Length - 1
oPDN.Lines.SerialNumbers.InternalSerialNumber = sernoval(k).Trim
oPDN.Lines.SerialNumbers.ManufacturerSerialNumber = mnfserval(k).Trim
oPDN.Lines.SerialNumbers.Quantity = linedetails(iRowNo).Quantity
Next
oPDN.CardCode = "C232323"
oPDN.Lines.ItemCode = "A00004"
'oGR.Lines.LineNum = 0
oPDN.Lines.BaseLine = 1
oPDN.Lines.BaseEntry = 202
'oGR.Lines.BaseRef = 203
oPDN.Lines.BaseType = 20
oPDN.Lines.Quantity = 1
oPDN.Lines.UnitPrice = 2
oPDN.Lines.WarehouseCode = '01'
oPDN.Lines.Add()
lRetCode = oPDN.AddHi Vasanth,
I'm not really fluent in VB, but I think that a SerialNumbers.Add() and SerialNumbers.SetCurrentLine() are missing before the Next
Regards,
Eric -
Acrobat Reader 9.5.1 'Internal Error' [solved]
Hello, everybody.
To come quickly to the point, here is the problem / issue (hopefully, in the most concise and useful formulation).
OS: openSUSE Linux 12.1 with kernel v. 3.1.10-1.9 and (just for the report - even if I don't think it matters) Qt libraries v. 4.7.4-19.6.1. I say I don't think it matters, because I've already experienced this very same issue with openSUSE 11.0 (kernel 2.6.25.5 and Qt 4.4.0, with Acrobat Reader 8.1.3).
Acrobat Reader v. 9.5.1 (the release included with the distro).
The issue: when I try to overwrite an existing PDF document (i.e.: save 'foo.pdf' OVER a pre-existing copy of 'foo.pdf') I systematically get caught into the sequence 'the document already exists. Do you want to overwrite it?' -> yes -> 'An internal error has occurred' -> the document can't be overwritten.
Attempts to fix: I've already tried - suspecting I had possibly missed something during the installation process - to change the permissions of the '.adobe' preferences folder under my /home directory by issuing the usual 'chown -R xxx:yyy .adobe' command: with no result.
Any idea about the possible causes and workarounds?
BTW, while I was trying to recover the exact information about the program's version in the 'Help -> about Adobe Reader' menu, I've stumbled into another issue (which looks very much like a bug): that is, the program freezes if I try to read the 'Credits' information by pushing the suitable button in the red 'Adobe Reader 9' banner. Possible causes and remedies (aside from upgrading to the most recent version)?
Thank you very much in advance
Mario Grilli
Message was edited by: jaygrey
Reason: solvedI add this one to my previous message, which solves the issue (and closes the thread).
The issue has been solved (on another system, though: that is, Fedora 17) by installing the original Acrobat Reader 9.5.1 from Adobe. With "original" I mean: not the .rpm archive enclosed in the OS DVD, but the one which can be downloaded directly from Adobe.
The method: one has to open a terminal and simply do the following:
# rpm -Uvh http://linuxdownload.adobe.com/adobe-release/adobe-release-i386-1.0-1.noarch.rpm
[as root] # yum install AdobeReader_enu
The version of Acrobat Reader which is installed by this method is complete with all the GTK suitable libraries: and actually works with no hassle, allowing to overwrite previous versions of the same file.
Now, however, I have to find some equivalent procedure under openSUSE: because it's a fact that even the AdbeRdr9.5.1-1_i486linux_enu.rpm file one usually downloads from here installs a copy of Acrobat Reader which shows the aforementioned issue, despite all the necessary graphical libraries being already installed in the system. Now, since this one is probably the .rpm archive a user finds in the main .rpm-based Linux distros, I add that it might be interesting if some Adobe engineer would try to dig a little deeper into this issue... -
Internal Error -5000 when creating AP Credit Memo
hi all, i've some problem when trying to create AP Credit Memo using VB.Net via SAP B1 SDK.
My application keep throwing error "Internal Error -5000 Occured"
My friend suggest me to create AP Credit Memo using SAP B1 application first, then try using the same parameter that i inputed into the system to create AP Credit Memo using SDK, he said it ussualy works.
I already try my friend suggestion to create AP Memo using SAP B1 Screen and it
was worked.
The information that i input when creating AP Memo via SAP screen are :
- Vendor
- Item/Service Type ="Service"
- Item/Service Description
- G/L Account
- Tax Code ="VNC"
- WTaxLiable =No
But when I try to create AP Memo using VB.NET using SAP SDK, it still
throwing the same exception as before (Internal Error -5000 Occured) even
I passing the same parameter.
Bellow is my code :
For the master :
vAPmemo.DocObjectCode =
SAPbobsCOM.BoObjectTypes.oPurchaseCreditNotes
vAPmemo.DocType =
SAPbobsCOM.BoDocumentTypes.dDocument_Service
vAPmemo.CardCode = "V001" ' txtCcode.Text
vAPmemo.DocDate = Now 'DatePosting.Value
vAPmemo.DocDueDate = Now ' DateDue.Value
vAPmemo.DocCurrency = "IDR"
vAPmemo.Comments = "Based On Tagihan No. " &
dtTable.Rows(j)("JurnalMemo").ToString.Trim & "."
For The Detail :
vAPmemo.Lines.AccountCode =
dtTable.Rows(j)("AccountCode").ToString.Trim
vAPmemo.Lines.BaseType = 18 'basetype = 19 (a/p
credit memo)
vAPmemo.Lines.ItemDescription = "Test"
vAPmemo.Lines.WTLiable = SAPbobsCOM.BoYesNoEnum.tNO
vAPmemo.Lines.TaxCode = "VNC"
vAPmemo.RowTotalFC= CDbl(dtTable.Rows(j)("Credit").ToString.Trim)
Is there anything wrong in my code ?
or missing parameter?
Regards,
Herfin
Edited by: Herfin Jodana on Aug 28, 2008 3:29 AM
Edited by: Herfin Jodana on Aug 28, 2008 3:30 AMHI,
if you want ot create a A/P Credit memo, you do not have to give the basetype/BaseLine/BaseEntry fields between document lines.
the correct is:
vAPmemo.Lines.AccountCode =
dtTable.Rows(j)("AccountCode").ToString.Trim
vAPmemo.Lines.ItemDescription = "Test"
vAPmemo.Lines.WTLiable = SAPbobsCOM.BoYesNoEnum.tNO
vAPmemo.Lines.TaxCode = "VNC"
vAPmemo.RowTotalFC= CDbl(dtTable.Rows(j)("Credit").ToString.Trim)
if you want to create a A/P Credit memo based on Existing Invoice, you must have to provide the basetype/BaseLine/BaseEntry which means:
vAPmemo.Lines.BaseType = 18 'APInvoice
vAPmemo.Lines.BaseEntry = 'Refrence docentry for A/P Invoice
vAPmemo.Lines.BaseLine = 'reference to A/P Invoice linenumber
Try this, it is now working.
Best Regards,
J.
Maybe you are looking for
-
Can't install maverick on my wiped out late 2013 retina macbook pro. Please help.
So, i decided to install windows 8.1 alongside mavericks on the mac and tried using bootcamp which failed, so i manually created a partiton using disk utility which worked, later i decided to create a shared partition so windows and mac could share f
-
Oracle to MySql character set problem
Dear Gurus, My database is Oracle 11g R2 (11.2.0.1.0) on Sun Solaris 10. To get data from mysql database for reporting purpose, I used DG4ODBC and followed strictly the OMSC note "Detailed Overview of Connecting Oracle to MySQL Using DG4ODBC Database
-
Planned order to pur.req
Hi , Planned order was converted to purchase requistion from MD04. But what i find is the planned order is also existing in MD04 , idealy it should not. what could be reason for it. ? Regards Shankar R
-
Update UDF on the header level
I have created two UDF's on a marketing document on the header(Title Level). I have created two different formatted searches such that on the first UDF after adding data it fills relevant data on the second UDF. However this is not happening unless i
-
I am facing the same disaster ,, I am forced to reactivate / reinstall CS 5 and after 10 hours of trying all options fail . WHy cant I simply reenter my serial number , rather than spead hours on uninstalling then trying to reinstall an 8 hou