SNOTE wants to implement pre-requisites that do not match our system

Hello everyone,
I am trying to implement a few notes on our Sandbox system where SAP_APPL = 602.
Some of the notes I want to apply using SNOTE want to apply pre-requisites that I would expect to have no relevance as they are for earlier versions of SAP_APPL.
For example:
Note 1506402 wants to apply 801388
Note 1551976 wants to apply 814277, 914560, 930716
Is this a harmless bug in SNOTE or will it actually change something? I looked at the corrected object list in SNOTE for 801388 and there was an entry, even though the change in the correction was already in the code.
Any advice will be greatly appreciated!
Thanks,
Stuart.

Hi Sturt,
Same thinks happened to me also . It download the pre-requisite notes. But which notes are not applicable,  SNOTE will not change any code. From SNOTE there another functionality to undo the implementation. So if any think goes wrong, you have the alternative solution.
Thanks
Subhankar

Similar Messages

  • SCOM 2012 R2 - Implementation Pre-requisites.

    Hi All,
    I would like to know if we need to keep in mind any pre-requisites when we implement SCOM 2012 R2. So my question is specific is , if I would install SCOM DB in a VLAN A and operations manager in VLAN B than are there any specific pre-requisites that
    I need to keep in mind?
    Rgs,

    No. You need to verify firewall ports and communication between Vlans
    http://expertslab.wordpress.com/2014/04/09/scom-2012-firewall-ports/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Display Purchase requisitions that is not approved.

    Hai all!
      i want to display all Purchase requisitions that is not approved, ie. status IN RELEASE should be get display..
    so plz give me some sample code 4 achieving this..
    the final report should contain PR number, item of requisition, material, and status ..

    Hi Friend,
    Please check FRGKZ field of EBAN table, if the value is not equal to B, it is not released.
    Regards
    Krishnendu

  • I want to make a CD that is NOT in alphabetical order, not in artist alphabetical order and not in album alphabetical order... I want to make it the order I want.  Can this be done? How?  thanks in advance for all your help.  Mona

    I want to make a CD that is NOT in alphabetical order, not in artist alphabetical order and not in album alphabetical order... I want to make it the order I want.  Can this be done? How?  thanks in advance for all your help.  Mona

    cjam732 wrote:
    Ed - by sequence of numbers, are you talking about the rectangle with the arrow that sorts by track number?  I've tried to follow your directions to Mona but my playlist still gets burned to CD in alpha order.  driving me crazy.  any other suggestions?   thanks, Chris
    Chris, The sequence number is the first column of numbers, to the left of the Name column.  It always goes 1, 2,3  etc.  It is not the same as the Track Number, which has its own column.
    As a precaution before burning, make sure that Shuffle is tunred off, and that you right-click the playlist name and choose 'Copy to Play Order"  (although technically they should not affect the burn).

  • When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

    When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

    I don't know that you can purchase in one country and use it in another.  Try contactoing Adobe support thru chat:
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • How to map a url that does not match with the context root  ?

    does weblogic support url that does not match the context root ?
    ex. the context root is AAA. the welcome page can be
    retrieved using http://localhost:7001/AAA
    Can it be configured to use http://localhost:7001/BBB to bring up the index.html in context root AAA ? if so, how ?

    I agree with Imp68.
    It still amazes me that in 2014 so many web sites are still not standards-compliant and instead insist on sniffing for the user-agent.  And, in the majority of cases, I've found that the websites work fine with any modern browser.
    phardell,
    To be clear, Safari is not the problem, the website is!  The developer of this website is still living in the 1990s and needs to move forward with the times.  Imp68's suggestion will cause Safari to "pretend" to be whatever browser you wish.  Try choosing "Safari 7" if that worked for you in the past and the website will likely go back to working.  If that does not work then try choosing "Internet Explorer 10" from the menu and see if that works.
    No matter what the result, you should look at the bottom of the page for a link to report problems with the website.  Submit a comment that tells them that they need to "modernize your website to support all modern web browsers".
    Good luck.

  • After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help."

    Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?

    Did you purchase the software in another country than where you live?

  • RV120W: The user attempted to connect using a dial-in medium that did not match the restricted dial-in media

      I am trying to configure a Cisco RV120W wireless using RADIUS. The IAS server is Windows 2003. The wireless client can’t access the wireless.  The ISA server keeps getting this error: Event Type: Warning Event Source: IAS Event Category: None Event ID: 2 User: N/A Computer: DEVICES1 Description: User ntdomain\blin was denied access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.30.102 NAS-Identifier = Called-Station-Identifier = Calling-Station-Identifier = Client-Friendly-Name = RV102-Domain Client-IP-Address = 10.0.30.102 NAS-Port-Type = NAS-Port = Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = EAP EAP-Type = Reason-Code = 70 Reason = The user attempted to connect using a dial-in medium that did not match the restricted dial-in media. Check the dial-in constraints for the matching remote access policy. The public wireless and WPA2 work fine. Other Cisco 1240 wireless works fine with this event: Event Type: Information Event Source: IAS Event Category: None Event ID: 1 Date: 10/18/2013 Time: 1:33:19 PM User: N/A Computer: DEVICES1 Description: User blin was granted access. Fully-Qualified-User-Name = chicagotech.org/Users/Bob Lin NAS-IP-Address = 10.0.20.103 NAS-Identifier = WLC2504 Client-Friendly-Name = WLC2504 Client-IP-Address = 10.0.20.103 Calling-Station-Identifier = 90-18-7c-e6-95-aa NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = Policy-Name = CBG-All Authentication-Type = PEAP EAP-Type = Secured password (EAP-MSCHAP v2) Can you help?                  

    Dear Customer,
    Thank you for reaching the Small Business Support Community.
    The RADIUS configuration settings are intended to authenticate the wireless clients attempting to connect through a SSID and if this is the problem you have, I first suggest you to check on the RADIUS server IP address (Security>RADIUS Server), make sure it is reachable, and the authentication port number used by this server to send traffic and the shared key used to authenticate to the server which must match on both sides.  If all that is good, try using WAP Enterprise as the wireless security method and not WAP2 Enterprise.
    If the problem persits I then first suggest to to make sure you run the latest firmware release version 1.0.5.6;
    http://software.cisco.com/download/release.html?mdfid=282981372&flowid=796&softwareid=282487380&release=1.0.5.6&relind=AVAILABLE&rellifecycle=&reltype=latest
    Then contact support if the problem persists; (the "dial-in medium" part error I just don't understand what it has to do with the RADIUS wireless client authentication);
    https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
    Please do not hesitate to reach me back if there is any further assistance I may assist you with in the meantime.
    Kind regards,
    Jeffrey Rodriguez S. .:|:.:|:.
    Cisco Customer Support Engineer
    *Please rate the Post so other will know when an answer has been found.

  • HT204406 Upload of songs that were not matched fails, iTunes crashes.

    On restart, asks to logout then log back in to iTunes store.  Problem does not clear up and repeats.

    RaschkeKM wrote:
    iTunes Match is not working correctly.   When I go to play one song(example...Kelly Clarkson's Since U Been Gone does not play, but Miss Independent does. )
    This is a known issue and at this time there is no fix. The workaround is to disable iTM on the iOS device and sync the mismatched songs via USB/Thunderbolt then re-enable iTM. This way you will be assured of having the "correct" version of the track on your device.
    RaschkeKM wrote:
    There are a number of other songs that I have had in ITunes that are not matched...they are completely missing from my inventory. 
    I'm afraid I don't understand what you mean. Do you mean you have music stored on your iPod Classic that is not also in your iTunes library? If that is the case, then of course those songs won't be matched or uploaded. A song must be in your iTunes library for it to be processed by the iTunes Match service.
    Recover your iTunes library from your iPod or iOS device
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

    Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What  can I do?

    Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
    1. Reboot and immediately hold down command and R (two keys).
    2. When you see the screen shown on this page, select Disk Utility and continue.
    3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
    4. After Repair Disk, click Repair Permissions.
    Quit DU and restart.

  • "This card was purchased in a country that does not match your Adobe ID"

    I bought a creative cloud plan from 500px, but when I try to redeem the license code I get the following message: "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help".
    500px did not sell this to me as a product which could only be used in the USA.
    This question has been posed previously - suggestions include changing the country associated with your adobe ID. However I have doubts as to the legality of this as why else would this restriction be in place if it were not for tax reasons.
    Any suggestions would be most welcome.
    muster_mark

    https://forums.adobe.com/thread/1568798 about 500px problems

  • Clean-up all data that did not match with the selection.

    Hi Everyone,
    In my requirement I need to  Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
    Pls suggest me...

    Hi Meenakshi
    Try  delete lt_cdpos where kunnr  NE KUNNR (from selection screen) .
    Before Checking <condition> make sure both comparing field type match with each other.
    You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
    Regards
    Parveen

  • Just bought CC and have license key. When I try to redeem it says "This card was purchased in a country that does not match your Adobe ID."

    Just bought CC and have license key. When I try to redeem it says "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." anyone have any ideas?

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -ID support http://helpx.adobe.com/x-productkb/global/service-c1.html

  • This card was purchased in a country that does not match your Adobe ID. You can try signing in with

    This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help.

    Hi Debbyw01,
    Unfortunately we can't change the country associated with an Adobe ID but have the following options:
    - you can create a new Adobe ID with the country  using a different email address
    - if you'd prefer to use your current email address please contact Adobe http://helpx.adobe.com/in/contact.html  who can assist you to
    make a change to your existing ID that will allow you to create a new ID with the original email address.
    Please let us know what you'd prefer.
    http://forums.adobe.com/thread/988634?tstart=0
    Regards,
    Rajshree

  • EREC - E-recruitment implementation (pre-requisites)

    Hi,
    I hav just started with a project related to E-Rec  EHP4 implementation.May i request E-Rec experts on community to share some pre-requisites for me to start with.
    Scenario : E-Rec is being implemented as a separate system with integration to HR system. (data from HR to E-rec will flow through ALE)
    1. What all switches and extensions in need to activate in SFW5?
    2. What all things are required to be configured in IMG ?
    3. What all things I need to configure through Portal ? Which roles should i get on the portal?
    4. What all activities are to be done by following people in ERec Implementation
    > E-Rec Functional Consultant
    > Portal Consultants & Webdynpro
    > ABAP-HR Consultants (BAdI's,etc)
    > Basis (TREX and what else?)
    I would appreciate any quick respone over the same.
    Thanks in anticipation.
    AJ.

    Hi Abhay,
    Please check out this link
    e-recruitment

Maybe you are looking for