Snow Leopard 10.6.1 Installation Problem

Hi,
This problem is really under 2 categories, so if you wouldn't mind looking at this. . .
http://discussions.apple.com/thread.jspa?threadID=2155233&tstart=0

SOLVED. Must have been a installation error. Reinstalled the update in safe mode and now I'm good.

Similar Messages

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HT4906 I updated my computer from Snow Leopard to Lion. The problem is none of my pictures go to my IPad or iPhone. When I checked my settings, I go into ICloud and photo Stream, and it tells me that I need to buy a update. Any help would be apprecia

I updated my computer from Snow Leopard to Lion. The problem is none of my pictures go to my IPad or iPhone. When I checked my settings, I go into ICloud and photo Stream, and it tells me that I need to buy a update. Any help would be appreciated.

Then maybe you need to buy an update.

I've just upgraded from Snow Leopard to Lion. Installation seemed to go OK but on rebooting it is asking where the System Events app is. What is it and where is it located?

I've just upgraded from Snow Leopard to Lion. The installation seemed to go OK but on rebooting it is asking where the System Events app is. What is it and where is it located?
Thanks

If the dialogue appeared once, and you cancelled once, the dialogue may reappear when you next log in. For more certainty I suggest a restart of the operating system, then a log in.
If you like: immediately after the problem is worked around, open the Console utility to see whether — amongst its view of all messages — there is an obvious sign of what caused the dialogue to appear. (If you see nothing obvious, don't waste too much time looking.)

OS 10.6 Snow Leopard and iLife '09 installations disks ejected and not read

I bought the Mac Box Set intending to upgrade from Tiger 10.4.9 to Snow Leopard 10.6 and iLife '09 and iWork '09. I was able only to install the iWork disc. The other two are ejected without any error message or notice of any sort. The Genius desk was unable to solve the problem. Please help.

LaoTzim wrote:
Is it possible that there are certain firmware or OS patches that conflict with SL? How about any third-party apps?
Any third party OS patch could conflict with running Snow Leopard, & a few could conflict with installing that OS when you start out the installation process by clicking on the "Install Mac OS X" icon while running your Mac normally (IOW, when it has started up from the internal HD), but none should cause the installer disc to be ejected when the Mac is starting up, including when the "Install Mac OS X" application does a restart, which it should do at about 10 to 15 minutes into the normal install process.
This is because at startup time, no OS has loaded yet -- in fact, part of the startup process involves looking for disks that might contain an OS to start up from, including on DVD's in the optical drive.
IOW, if you can start up from the installer DVD, it doesn't matter what is on some other disk. If you can't, then either the drive or disc is defective or your firmware (including what is stored in "PRAM") is messed up. You can reset PRAM using the method discussed elsewhere in this thread. As long as any firmware patch came from Apple & was successfully installed, there is very little chance that it is the problem. If it is the problem, there is not much you can do about it besides taking the Mac in for service.

Can I start up my new imac (Snow Leopard) from a Tiger installation disc?

Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
Disc Utility is giving me the following error:
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Since I don't have a Snow Leopard disc, I've tried starting up with my old Tiger installation disc, but to no avail... At the risk of sounding a little stupid, should Apple have given me a Leopard disc with my purchase?

bgaribay wrote:
Last week I upgraded to an entirely new machine. My old imac was running on Tiger and the logic board failed. Though I had an external, I had my local Apple store transfer my hard drive data to my new mac. Since then, I've run Disc Utility a few times, each time with no problem until today.
Disc Utility is giving me the following error:
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Since I don't have a Snow Leopard disc,
I've tried starting up with my old Tiger installation disc, but to no avail...
you can not use the tiger disk. you need to use your snow leopard disk. what happened to yours? every new computer comes with one. it's called install disk one and is packaged with every new computer.

Snow Leopard not booting after installation in rEFIt triple boot system

Hello,
I have a Core Duo Mac mini, on which I was successfully using a rEFIt triple boot configuration with
Leopard, Windows XP and Linux. After installing Snow Leopard on top of Leopard, Snow Leopard boots directly (without rEFIt showing up) the first time after installation. On the following reboots, rEFIt shows up but when selecting Mac OS, the system shows first the grey screen with the Apple icon, then it shows a grey screen with a "no access" icon and does not make any further progress. I reinstalled several times and at last I even removed rEFIt, but Snow Leopard won't boot anyway.
Can anybody help? Thanks

Welcome to Apple Discussions!
I'd post a bug report here:
http://sourceforge.net/tracker/?group_id=161917&atid=821764
They could probably help isolate your problem.

How do I totally remove the 'ghost' of mountain lion from my ibook G4? I erased and restored to panther then Snow Leopard but ML still causing problems

I am not very tech savvy but work from home and have used Macs for about 18 years, so know the basics. Have had iBook G4 for almost 5 years, it came with Panther Discs and later added Snow Leopard. Never had even the slightest issue until about 2 months ago. Kept getting "browser no longer supported" on websites and eventually could no longer edit my own Jimdo website or publish on YUDU, so downloaded Mountain Lion and installed it on my iBook.
Straight away it was much slower to start up, wasn't that keen generally, but used it for 6 weeks hoping I would get used to it. At that point my older Mac Mini (also running on Snow Leopard) died and as I wanted to continue using my printer and scanner (neither had drivers to work with Mountain Lion) I went to Time machine and restored my iBook to the day before I installed Mountain Lion.
iBook was better immediately and started faster again, everything fine for about 3 weeks and then last wednesday my iBook would not come back on. The grey start up window showed the apple and whirly wheel for between 5 to 10 minutes, then just a blank blue screen. I could move the cursor but that was it. Tried to start up again many times, eventually the grey apple was taking up to 15 minutes before the blue screen. Refused to go beyond that blank blue screen when holding down C and starting up from either Panther or Snow Leopard discs or from Disk warrior disc. Disc Warrior and Utilities said nothing was wrong with the hard drive but always showed the HD icon with a yellow exclamation sign over it.
Because of work pressure, after 48 hours with no improvement, I wound up buying a new iMac, so can work but still would love to have my iBook back, plus use of my Printer and scanner again. Last night finally managed to Panther reinstalled after erasing 4 times and many failed attempts at install. Everything seemingly fine but Snow Leopard first reinstall failed so erased once more. Second time SL installed but gave a warning in red saying something to the effect that as I am installing an older OS over a newer one, there will be issues. This leads me to believe that somehow, despite Time Machines and now 5 separate Hard Drive erasures through utilities, Mountain Lion is STILL on there? How on earth can I get rid of it and return just to Snow leopard. Any help really welcomed as I am at the end of my tether but don't want to give up on my old faithful (until now) iBook
PS: Sorry if I post in the wrong section

First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion. To run Snow Leopard it has to be an Intel processor, not a G4. What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
Second, if you have erased the hard drive there should not be remnants of any prior content. Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems. You may want to consider simply replacing the hard drive so there are no questions about faults. A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install. If it continues to refuse, then it sounds as though there is a fault with the hard drive.

MacBook pro, snow leopard, iPhone and Bluetooth PAN problems

Short Version:
I am having connectivity issues connecting my new MacBook Pro (MBP) to the Internet thru a Bluetooth PAN on my iPhone4. This has been working fine for a few days and then today it just stopped working responding that my iphone connection is not available, it's off, too far away or whatever. This is not the case. When I try to connect the iPhone to the MBP the iPhone is saying my MBP is not supported. I can pair the devices, but as soon as I try to connect to the Internet thru the iPhone via the MBP the connection fails.
Long Version:
I received a shiny new MacBook Pro only a few days ago and I am having Bluetooth Paired networking issues as of today, 2nd, March, 2011. The MacBook Pro is running Snow Leopard 10.6.4, and is brand spanking new, unmodified, factory defaults.
The iPhone(s) I am using are iPhone 4's with iOS 4.1
On the first day I paired the MBP with both iPhones with ease, it was so easy my grandparents could have done it. So point and click and it just worked....
The iPhones are set up in iTunes with names similar to dave1 and dave2
On the MBP I can select which device I want to connect to the Internet by going to the Bluetooth icon and connecting to whichever iPhone I have handy at the time. Since the plans are limited connectivity, I do load share between the two.
Today, for no apparent reason, I have been unable to connect to my wife's phone just getting a basic "The Bluetooth network is unavailable" message telling me the iphone is out of range, not on, etc etc etc. Not true.
No problem, I just connected to my phone instead. Occasionally I tried her phone again, but it just never worked. I eventually got her to reboot it, still no joy.
Then, a couple of hours ago, while in the middle of reading my rss feeds, my Bluetooth connection dropped out. My phone is sitting right next to the MBP. So that's not the issue. No amount of reboots of either the MBP or the iPhone have fixed this. I have unpaired and repaired the devices (on both phones) countless times. I have removed the sim card and rebooted, I have disabled and reenabled Bluetooth on both, rebooting before doing this, and after and during, I have reset network settings. Nothing I try is working here.
Pairing alone is an event, but here's an example of what's happening:
I go thru the motions, the MBP shows me a number (eg, 451234) and the number is displayed on the iPhone. They see each other. The numbers are the same. Good. I click PAIR on the iPhone and MBP and everything appears good. But then if I go to connect to the iphone on the MBP I get the out of range error.
I have made both discoverable, and tried to connect to the MBP from the iphone, and got a different error message altogether: Connection Unsuccessful - "{insert my name}'s MacBook Pro" is not supported. W-T-F? It was an hour ago? What has changed?
Then, the only option on the iPhone is to "Forget Device". ok, forget it, and start again. Same same.
Neither the iPhones nor the MBP have been upgraded or changed in anyway today, or even recently. In fact, as mentioned earlier, I was actively using the connection without any issues for a number of hours when it just stopped for no apparent reason.
Not that these matter, but I am in Thailand (live here for the time being), I'm on the TrueMove network, which offers 3G coverage in my area (Patong Beach).
This could easily have been filed under MacBook Pro, iPhone, OSX and possibly many other discussion headings, because the issue can be any or all of the OS, the MacBook Pro Bluetooth adapter, the iPhone Bluetooth, (iOS for that matter), or some other unforeseen conditions...
My head is sore from pulling my hair out. I am open to any suggestions (reasonable or otherwise!)
For further info (not that this post is long enough already, or anything, but), I thought it was interesting that the phones didn't fail at the same time, so I pulled out an old iPhone 3GS and set it up, but after pairing, the two can still not connect.
I know its not an issue with the data plan on the iPhone since I'm here surfing now without an issue, so it's not a data problem.
Open to ideas....
If you've read this far and you're ever in Phuket, give me a call... I'll shout you a beer

Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

HP Photosmart C 4480, Snow Leopard and most recent driver problem?

I have followed the posts regarding problems with various HP printers since the update to Snow Leopard. I removed all the HP software, went to http://support.apple.com/kb/HT 3669 and confirmed that my Photosmart Printer is included. I downloaded the drivers and installed them. I opened system preferences, deleted and then re-added my printer. The printer works and the scanner is not detected, I am connected to my iMAC via a USB port. It does not matter whether I go to System Preferences to printer and fax, use Preview or Image Capture, my scanner is not recognized and in none of these places is there an option to add a scanner. I have turned my printer/scanner off and on and I deleted and then re-added my printer without success as well. Despite all the comments to the contrary, the latest "updated" drivers are not working properly.
Any cures or recommendations are highly appreciated.
Doc.Gary

Get the latest driver from HP. See http://discussions.apple.com/thread.jspa?messageID=10216682#10216682

Snow Leopard (10.6.3) Installer Failed, MacBook Shuts off on boot

Hi all,
So a friend of mine recently bought an OOTB Snow Leopard install Disc from Apple and attempted to install OSX 10.6.3 on his MacBook White (I can't remember exactly what version of OSX he was running before but I know it was 10.5.x). Some time into the Installation, the Installer fails with the screen "Install Failed" and under that it says "Mac OSX could not be installed on your computer" with a big yellow exclamation sign. Under that it says " The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance. Click Restart to restart your computer and try installing again."
However, when he restarted and tried to boot up, the computer shuts off after getting to the grey Apple screen with rotating gear. I am not sure why the install failed, but I suspect now it has corrupted the old version of OSX which resided on the hard drive, and is causing the startup to fail. I had him boot from the OSX 10.6 Installation media and run Disk Utility and try to Repair his hard drive (Macintosh HD), but the Repair fails and window pops up "Disk Utility stopped repairing 'Macintosh HD'. Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed up files."
The details of the Repair printed the following:
Verify and Repair "Macintosh HD"
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Invalid node structure
The volume Macintosh HD could not be verified completely.
Volume repair complete
Updating boot support partitions for the volume as required.
Error: Disk Utility can't repair this disk...disk, and restore your backed-up files.
I had him try to run repair a few times to be sure it would not complete, to which he said it failed the same each time. Then I had him try to boot up in Safe Mode, but the boot up was the same, computer powers off after hitting the Apple loading screen. He has confirmed that this could not be due to the battery or overheating. Is there anything else we can try before reformatting the drive? Is there a way to eliminate hard drive failure from the equation and conclude that it is a corrupt OS? I would hate for him to lose all of his data if there are any other options, please let me know.
Thanks,
Matt

Invalid node structure requires a robust disk repair utility such as DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair
The pre installed Disk Utility app cannot repair this.

Snow Leopard 10.6.3 Installation on external USB

I've been trying to install Snow Leopard onto an external USB drive. I've looked at a dozen different YouTube videos and other posts regarding the process, but I can't seem to get mine to work. Here is my process:
1. Open Disk Utility
2. Create 2 partitions - one bootloader partition and one a partition for the OS to be installed
3. Insert Snow Leopard disc
4. Click Restore and put OSX in the Source spot, the bootloader partition for the destination. I have tried both unchecked and checked for the 'erase destination' checkbox.
I get the following error:
Restore Failure: Could not find any scan information. The source image needs to be imagescanned before it can be restored.
I click 'Scan Image for Restore' and then once that completes I click 'Restore' again. most the time it still gives me the same error. After trying a few different things, I am finally able to get it to work (supposedly). I run the install, it restarts my computer, and then it sits there on the white screen with the apple logo. If I hold down the option button, the new install doesn't show up as an option to select.
I'm at a loss as to what I should do next.

I have a 24" iMac with a non-functiong drive (spits every disc out without trying to read them). I want to upgrade from OS 5 to OS 6 (Snow Leopard) snd then on to a higher OS, which I understand I can download from Apple (so need for a drive). I followed your steps but could not go forward because my flash drive had 8 gb and once it was formatted according to your instructions, I only had a little more than 7gb left, which was not sufficient. So I bought a 64 gb flash drive and just went through the process again. The installation of Snow Leopard onto my flash drive took hours, but finally completed. I was expecting to have the installation disk installed so I could then insert the flash drive into my iMac and install OS 6. You gave no directions on how to proceed once you launch the download onto the flash drive. Since I had no installation program on the flash drive, I tried making a disk image of the installation disk, which I then copied onto the formatted flash drive. However when I inserted it into my iMac and tried to install the OS, I got the message saying I neded to burn it onto DVD disc. That, of course is no solution because my drive does not work. Am I missing something (unstated) in your instructions? I followed them a T. Is there something else I can do?
Thanks.

Fresh snow leopard install and still same problem. Please help :(

hello.
After 10.6.3 update....
I had issues with trackpad and keyboard freezing on my early 2008 macbook pro.
I have tried to reset pram, nvram, smc, onyx maintance everything i could think of.
So i decided to wipe hard drive clean and do fresh install. Everything was working fine until i applied 10.6.3 update.
Is there any fix for this yet ?
It still doesnt work good even with fresh install of snow leopard and 10.6.3 update.
Thank you

I've read a lot on the Internet about alien UFO crashes too, but that doesn't mean it is a good idea to take them at face value.
If something doesnt work after clean install then thats updates issue.
Not necessarily, at least if you mean the OS update itself. Do a little research. This same argument pops up after every OS update. There are no exceptions -- every one of them has been blamed for all manner of post-update problem, linked to each of several different models, & everything else you have read on the Internet about this one. Users also frequently use the "clean install" argument in support of these theories that the update, whichever one it happens to be, is the only possible culprit.
The problem is these theories rarely prove to have any merit at all, & like with most such things, even when there is some merit to them, the complete explanation is more complicated. For instance, some users do a perfectly executed clean install & then ruin it by reintroducing the same bit of software that was the real problem in the first place. Some users don't know what a clean install is & mistakenly say they did one. Some eventually find & eliminate a different cause for their particular problems but never report that. Sometimes coincidence is involved -- with millions of users upgrading the chances that in some cases it is not are slim to none.
Basically, it is like anything else on the Internet. You can find something to support anything imaginable because people can imagine anything & too many of them ignore anything that doesn't support that or just don't make the effort to look for it in the first place.

Snow Leopard not working after installation

After successful installation of Snow Leopard on a new internal hard drive (connected through IDE to SATA adapter) in my Macbook (late 2006), it is not working. No icon is clickable, only cursor can move. Please help!

The OSX 10.6.3 was successfully installed from the DVD. This is the screen after booting. But it is frozen. There is no response to clicking any of the icon in the deck or in the menu bar. I can only move cursor. That's all.

Snow Leopard 10.6.1 Installation Problem

Similar Messages

Maybe you are looking for