Snow Leopard (10.6.4) Doesn't See Time Capsule Printer But 10.5.8 Does

Snow Leopard (10.6.4) doesn't recognize the Lexmark printer connected to my Time Capsule v 7.4.2. However, the printer is nicely recognized on Leopard (10.5.8) on my PowerBook as well as on the two Windows computers in my Home. In fact, with printer sharing activated on my PowerBook, the printer appears in the Add Printer dialog of my Mac Mini as a shared printer from the PowerBook, but not directly from the Time Capsule.
I have tried rebooting, upgrading to the latest software upgrades to no avail.
Any ideas ?

After all, the printer wasn't "Bonjour visible" in the list of available printers on 10.5.8 either, but it still worked after the earlier setup. Restarting the Time Capsule fixed the problem.

Similar Messages

  • After OS X Snow Leopard update. Why doesn't quick time doesn't load?

    after OS X Snow Leopard update. Why doesn't quick time doesn't load?

    Try installing the 10.6.8 Combo update which contains all the latest updates for that OS.  Be aware that there appears to be no further support for Snow Leopard.
    https://support.apple.com/kb/DL1399?locale=en_US
    If you have done it before it will do no harm.  Indeed it is known to repair some minor blemishes in your system.

  • After reinstalling Snow Leopard, migration assist and doesn't see my time machine disk.

    I had to erase my hard drive and reinstall Snow Leopard and when I tried to us Migration Assistant, it didn't see the Time Machine disk. Restoring from Time Machine directly didn't work because I couldn't gain access to and backup prior to the reinstall although the backups are all there when I open the Time Machine disk and look at folders from before the reinstall they all open perfectly.  How do I get to restore from pre-reinstall dates backups?

    I couldn't get Mail to open.  It bounced in the dock but wouldn't open.  All other programs were very slow, Disk utility showed the disk couldn't be repaired, so I erased and reinstalled and restored from time machine.  Everything we OK for a couple of weeks, then all the response times became very extended or wouldn't open at all. Took the iMac to the Apple Store where they checked out the hardware and found it to be OK.  They told me to erase, reinstall and use migration assistant to bring only my profile over.  The erase and reinstall were fine, but the time machine drive could not be seen by migration assistant, and I don't have access through the time machine utility to any backups prior to the first reinstall.

  • Snow Leopard 10.6.8 with latest AP Time Capsule..do I have to upgrade

    Hi, I'm an old Apple addict but new to community..current issue: How to get AirPort Time Capsule (TC) to set up properly with Snow Leopard..tuyrns out AirPort Utility needs updating and I cannot see a Snow Leopard version which covers the latest TC..Do I have to uptate to e.g. Yosemite? What then about my old Palm Desktop data (probably not supported after Snow Leopard)?  And, having a WiFi router as my modem, do I keep it on and run ethernet wire from TC via the router? Interference issues?  Many thanks !

    Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
    Next remove your Snow Leopard DVD and restart your iMac into OSX.
    Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
    Use Time Machine to make a Full Backup of your Macintosh HD.
    Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
    Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
    Shut Down and Boot back into OSX.
    Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
    Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
    Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
    Which version of Windows do you already have installed on the existing Boot Camp Partition?
    Is it 32 bit or 64 bit?

  • I am running Mac OS X and need to back up before installing Snow Leopard , can I back up to my Time Capsule?

    I am running Mac OS X currently and need to upgrade to Snow Leopard.  First I need to back up my computer.  I have a Time Capsule that automaticallyt backs up Snow Leopard and above but do not have Time Machine on this system.  How can I back up what I an currently running?

    Do I download these?  I am not particularly good at this, so any help would be great.  What I know now is that it is recommended to back up current comuter before installing snow leopard, but I have no idea how to do this.  I know I can go from 10.4.11 directly to Snow Leopard but am afraid I will lose data. 

  • New Retina MBP Doesn't See Time Capsule

    Just purchased a new retina MBP and have 2 probems with it.
    1.  It doesn't see my Time Capsule, when using Airport Utility it states that 'no configured airport base stations have been found'.  I also have an iMac which sees the TC ok.
    2.  I did a superduper backup of my old MBP but set up the new MBP as a new machine just importing the applications from the backup using Migration assistant.  Because of the problem in item 1 above I tried to start up using the external backup but failed. The new MBP cannot startup on the backup disk (Freeagent GoFlex 1TB) even though it's shown as an optional startup in the settings.  When trying to startup from it the machine just goes to a black screen and does nothing.
    So far, not too impressed.
    Regards

    1. Yesterday my mbp-r was unable to find my AP extreme base station in Airport Utility, even though the network seemed to be functioning perfectly. Rebooted the mbp-r (not painful given the speed), and now all is well with Airport Utility. Mysterious, but it worked.
    2. Does superduper clone the recovery partition? (I think I read somewhere it doesn't.) And if not, can you boot from such a clone? IIRC, Carbon Copy Cloner can produce a recovery partition.

  • Time Machine doesn't see Time Capsule each time it boots up

    Every time my iMac boots up, Time Machine forgets where Time Capsule is and I then have to click change disk and choose the TC again. The Time Capsule has short name so I know it's not that as pointed out in a support doc. Once I've told time machine it's then fine until I switch my iMac off, and then the whole process starts again.
    Anyone have any ideas on how to solve this slightly annoying issue?
    Thanks.

    Sorry but your picture is not presenting.. it is not your fault.. it will present on your computer but not on other computers.
    If I try and download the picture it is 209bytes.. clearly too small. This is trying to open your picture.
    This picture showing the failure is normal screenshot.. does it show for you??
    I have suggested reducing the file name.. pic1.png as I think the long names with spaces could be an issue.
    Here is the same picture with the name changed.
    You cannot select the source disk for the target in TM.
    Here is mine.. the source disk is never ever listed as available to use as a target.

  • I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password.  If anyone can help it would be appreciatedeas

    I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password.  If anyone can help it would be appreciated

    Restart with the Mac OS X 10.6 DVD in the drive or with the Lion USB drive connected, hold down the Option key just after the restart, tab to the installation disk, and press Enter. If the computer has a firmware password set, it needs to be provided for this to work.
    (66822)

  • HOW DO I INSTALL  DISK OF MY NEW  10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS .  BUT  I  WORK ON  OLD MAC 10.4.11 TIGER  THAT  DO  HAVE  DVD ACCESS .  HOW DO I CONNECT   NEW AND OLD  TO MAKE IT WORK ? THANKS

    HOW DO I INSTALL DISK OF NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD  ACCESS .  BUT I WORK ON OLD  MAC 10.4. TIGER  THAT DO  HAVE DVD PLAYER .  I KNOW  THAT SHOULD  BE  EAZY .  THANKS

    You'll need to provide some more information .... what current mac mini do you have? Click on the apple in the left corner of the menu bar, click about this mac, and what does it say for processor, memory, and os x version?
    When you say you have no DVD, do you have the mac mini server or is the DVD broken?
    You can't do anything with 10.6 Snow Leopard on a PowerPC mini, however, if it is an Intel-based mini, you could probably hook up the systems in target disk mode to install 10.6.

  • Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

    Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

    I forgot to write down my computer specs:
    iMac 27 Mid 2011
    2.7 GHz Intel Core i5
    4 GB 1333 MHz DDR3
    AMD Radeon HD 6770M 512 MB
    OS X 10.9.2

  • I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    Move your content to a new Mac - Apple Support

  • I changed my apple ID, now iCloud doesn't see my new ID, but won't accept my old password either.

    I changed my apple ID, now iCloud doesn't see my new ID, but won't accept my old password either.

    I tried that now. I was forced to "delete" everything on the cloud, and now I tried signing in exactly as you described, about 45 mins ago, and I'm still waiting for it to actually sign in.

  • Trying to connect Airport time capsule to my leopard iOS mac.  Downloaded software for time capsule for snow leapard/leopard but still says I need more software.  What do I need?

    Trying to connect Airport time capsule to my leopard iOS mac.  Downloaded software for time capsule for snow leapard/leopard but still says I need more software.  What do I need? I have a 10.5.7 iOS (Leopard).  It connects to wifi at speeds in the airport and has plenty of storage capacity and memory.

    If your Time Capsule looks like this..
    Please review the System Requirements to set up and administer the device.....
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and Airport Utility 6.3 or higher
    http://www.apple.com/airport-time-capsule/specs

  • My mac snow leopard 10.6.8 can not find my 3050a printer wireless

    My mac snow leopard 10.6.8 can not find my 3050a printer even though i have added the printer bonjour to my print list, even though the blue and white light s are on on the printer panel.
    I have good signal strength
    the printer ip is 192.168.1.8
    Help

    OK, using these instructions: https://www.broadbandadvice.org.uk/Website/Routers/HG532.htm  change the channel to 11.
    Now, if and when the printer is connected with a vaild IP address, let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I installed mountain lion over snow leopard and my macbook pro 13" taking time for login and logout,

    i installed mountain lion over snow leopard and my macbook pro 13" taking time for login and logout.. any solution

    Hi JoeyR.  Well, according to this link at the Apple Store, OS X Moutain Lion became available in July and I downloaded it for $19.99.  I figured I would do that before renewing my Norton security SW.  Are we talking about the same thing?
    http://www.apple.com/osx/

Maybe you are looking for

  • Calling a PL/SQL from VB with IN argument of object type

    I need to call a PL/SQL function in Oracle 8.1.6 from VB. One of the IN arguments is an object type (TYPE). How would I instantiate the variable of Oracle object type on VB side so that it can be passed to the Oracle? Thank you

  • How do I download Premiere Pro when it isn't an option in CC?

    When I try to download Premiere pro it opens the desktop CC window but it doesn't show Premiere as an option to download.  How do I get it downloaded?

  • Please help how to set/get a class object in hashtable or hashmap?

    Hi, everybody. I'd like to generate a class-object list in hashtable. However, compilation is error. Here is my code: Hashtable ht = new Hashtable(); Class tmp_obj; tmp_obj = Class.forName("my_class_name_1"); ht.put("my_class_name_1", tmp_obj); tmp_o

  • Help in finding view corresponding to application

    hi, i have an application for web dynpro component and there is a view corresponding to that application. i am not able to find out that view. where is that view. and which component is it attached to. any help. i have to make some changes in that vi

  • Pull data to SAP to SQL databse

    Hello Friends, I have to pull data from SAP to SQL data base ,what would be the best practice RFC or IDOCS and how should i use them ???? Pls explain me the process from scratch . its urgent......... pls thank you Kanishka