Snow Leopard 10.6.7 updates hangs after you unclick the install check marks three times

Since installing 10.6.7 in the last few weeks I have seen that when I update my software update the streaming bar checks my system & seems to hang about 3/4  across bar.  Finally it goes to a blank screen to the desktop screen & after about 10 sec. the update appears.  We have High Speed Internet service.  When I view it everything which is needed is supplied in the update.  I have found that some install items I do not want to load so I uncheck them in the install list on left side.  After I have unchecked 3 installs the screen seems to freeze or hang on the last item which has been unchecked.  I cannot uncheck or check anything else for about a min.  Then I uncheck the rest & I am able to download the items which I want.  What would cause this.  Hoping someone may be able to help.

It sounds like the Software Update preference file has become corrupted. Navigate to:
~/Library/Preferences/com.apple.SoftwareUpdate.plist and drag the file to your desktop. Then restart the computer and try another Software Update. The file will be re-created when you do.
Roger

Similar Messages

  • Lion upgrade seemingly hangs after reboot at the "Installing" prompt

    I ran the Lion installer in the InstallESD.dmg file located on the desktop of my fully functional 10.6.8 installation.
    The first part where the installer does various things, including "Downloading additional components", went well and completed with a Restart button, which I pressed.
    Then the linen texture appeared with the big white Installing prompt and the blue-white candy/progress bar. But nothing else happens.
    I left it for ten minutes and then pressed the power button on my Mac Pro until the computer shut off.Then started the computer again.
    But I come back to the linen background and the candybar prompt.
    Must I really wipe the drive and clone back 10.6.8 and start over?
    Thanks for any ideas.
    /p

    I have tried the following, all without result:
    - resetting the PRAM
    - verifying the checksum of the downloaded Lion file
    - installing on the bootdrive (SSD) to which I downloaded Lion (thinking that perhaps it must be installed on that drive)
    - installing on an external harddrive by upgrading a Snow Leopard system with all updates
    - installing on a second internal SSD by upgrading a Snow Leopard system with all updates
    I'm completely at a loss and have no fraking idea what to do.
    The reason I wish to upgrade is to be able to use Office for Mac which uses a Rosetta installer. Were it not for that I would happily have done a clean install. But since the upgrading goes so badly I guess I will have to buy the new Office.
    Gah.

  • After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

    After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
    Anyone know what is wrong with it??
    Is something wrong with mountain lion or the wifi itself????
    HELP PLEASE!!
    I need to use the internet desperately but i cant...
    Thank you so much xxx

    Hi galleryskins,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    I've quoted some helpful highlights for you:
    OS X Mountain Lion: Zoom content on the screen
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Entourage crashed after loading Snow Leopard 10.6.7 update

    I installed the Snow Leopard 10.6.7 update yesterday and immediately Entourage would no longer function properly.  None of the folders (inbox, sent, drafts, etc) are visible and the options at the top of the screen do not work.  Any suggestions would greatly be appreciated.

    I had a similar problem and solved it.
    Mac book (2010) 10.6.8, Printer: Xerox Phaser 8560.
    It started when I did a printer driver update.
    I'd print and then it would take 1-2 minutes just to get a print dialog box. -Frustrating.
    My console had some strange msgs about printer not authenticating and job not responding.
    So I deleted the printer, created it again using bonjour to find it, and changed the driver from the auto-selected driver(my printer model) to Generic PostScript.
    Now speed is back to immediate and it is printing fine.
    I suspect the manufacturer's driver is engaing something that is not compatible with the system.

  • Please help! Snow Leopard MacBook - Can't update anything I need.

    I have an older MacBook and everything I try, I can't seem to get it to update to Yosemite. I have an Iphone 6 and can't even download Itunes because my computer will not allow it. Can anyone help.

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • If I upgrade my leopard computer to snow leopard via an old update disc, can I then upgrade to Mountain Lion for the $20 deal?

    If I upgrade my leopard computer to snow leopard via an old update disc, can I then upgrade to Mountain Lion for the $20 deal?

    Yes, provided  your computer meets the system requirements and you have updated Snow Leopard to 10.6.8:
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    I would also read this:
    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.
    As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process.

  • Trying to install snow leopard on my Macbook Pro.  After already having problems with Grey screen, blinking file with a question mark, etc.  Computer now says that one of the hard drives is failing.The "hitachi" drive says it's failing in disc utility.

    o.k.  So, I've been tinkering with several "self help" fixes for several days now with no positive results.  I'll explain my initial problems and then end with my most current situation.  In hopes that someone out there will have a good suggestion or possibly remedy for the issues i'm facing
    First, my problem started after my wife played a game on my macbook pro and the computer froze.  She went into a panic and decided to shut down via power button.  When computer restarted she got the blinking file/grey screen and that problem continued for a couple of days before I began using steps from various support topics from apple concerning the grey screen/blinking file folder.
    Ultimately, yesterday I decided to erase my Macintosh HD file as one tip suggested.  Following the brief online and on screen (via the process) tips that were there.  Once that was completed I attempted to reinstall snow leopard (my most current version on hand) into the pc. 
    At first, I thought this would work.  It looked promising.  But, after several hours the installation screen returned with failure.  I attempted to repeat.  And, even repair drives during this try and re-try process.
    Now, today, one of the drives..  "hitachi..." states that it's failing and is in red letters with no ability to repair via the disc utility screen.  The Macintosh HD drive shows that it's o.k. But, this drive is listed under the HItachi drive so I think that's where a problem might lay.
    So, I guess my question really revolves around.. What if anything can I do to get the hitachi drive back up?  (short of taking it to a repair facility and replacing.) 
    And, how on earth can i get my OSX back up to I have a laptop again. 
    Operating on a macbook pro here.  It's my lifeline.  Otherwise, I am using a Windows desktop that i'm not that fond of.  lol
    I'm trying to bring this 2006 laptop back to life.  Trying to avoid a rather expensive repair or the purchase of a new laptop.  Also expensive...
    Any help would be appreciated.

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • I know if I want to update my 0S x.5 to Mountain Lion, I have to update to Snow Leopard and Lion first. Where do I find the Snow Leopard download?

    I'm trying to upgrade my daughter's computer for college. She currently has OS 10.5.8. She needs to upgrade to Mountain Lion. I know I have to upgrade to Snow Leopard and Lion first. I can't find the download for either. Please help!  I was in the site the other day and thought I saw a link, but now I can't find it.
    Thanks.

    There is no download for Snow Leopard and never was for the general public. Phone the Apple Store and buy it.
    Purchasing Lion isn't necessary to get Mountain Lion, but you will need to run the Mac OS X 10.6.8 combo updater.
    (68687)

  • I currently have OS X Snow Leopard and want to Update to OS X Lion, but it says that it is no longer available for purchase. Do I have to go straight to Mountain Lion?

    I currently have OS X Snow Leopard and want to Update to OS X Lion, but it says that it is no longer available for purchase. Do I have to go straight to Mountain Lion?

    If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions.  The cost is $29.99 (as it was before) plus tax.  It's a download.
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

  • HT201364 I currently have Snow Leopard and want to update to Mavericks

    I currently have Snow Leopard and want to update to Mavericks. When I go to the Apple Store the only available option is to download Yosemite but I don't want to.
    Where can I find a download link for Mavericks?

    Probably nowhere, and unless Apple says otherwise, definitely nowhere.
    (117199)

  • I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion my printer stop working, How do I make it work again?

    I have a canon multifunction printer that used to work with snow leopard but since I updated to mountain lion it stoped working. How do I make it work again?

    This problem is not unheard of when upgrading from Snow Leopard. It is usually solved by completely deleting the existing printer in System Preferences > Print & Scan, and adding it again.

  • Do I need to update my Leopard to Snow Leopard before I can update to LION?

    Do I need to update my Leopard to Snow Leopard before I can update to LION?

    Yes you do. You can get Snow Leopard at an Apple Store, or online: http://store.apple.com/us/product/MC573Z/A
    Snow Leopard retail disk will load Version 10.6.3, and you'll need to update it to 10.6.8 (this is just one update, you don't need to go to 10.6.4, 10.6.5, etc.). Go to  > Software Update to update.
    Then you should have the Mac App Store, which is where you go to download the Lion installer.

  • I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have

    I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?

    Welcome to Apple Support Communities
    Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
    Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open  > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version

  • I have OSX 10.4.11 and would like to upgrade to Mavericks.  Can I upgrade to Snow Leopard or do I have to climb through all the other OS'?  Thanks.

    I have OSX 10.4.11 and would like to upgrade to Mavericks.  Can I upgrade to Snow Leopard or do I have to climb through all the other OS'?  Thanks.

    Hi, you need 10.6.8 first...
    First you need to research all the problems people are having with the higher OSX versions, & make sure you have a bootable clone of what you have just in case.
    then you must get 10.6, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • Mountain Lion won't install on 10.7.4. Suggestion from Apple is to completely erase harddisk and install Leopard Snow Leopard Mountain Lion. Is there no other way to install Mountain Lion

    Mountain Lion won't install on 10.7.4. Suggestion from Apple is to completely erase the harddisk and install Leopard > Snow Leopard > Mountain Lion.
    Is there no other way to install Mountain Lion?

    I tried and failed for several hours to install Mountain Lion, and was repeatedly getting the "Recovery System" cannot be created error.  I tried all the tricks: resizing the drive partition, booting from an external boot drive, all to no avail.  After reading other users struggling with the same issue, I had determined it to be a boot camp drive error.  However, I didn't want to have to erase and begin anew when I came upon a possible solution.  I had long ago renamed my boot camp drive with a "." (".windows" for me) in order to avoid having the partition show up on my desktop.  So, I boot into windows and renamed the c: drive without the "." ("windows"), and reboot into os x.  The install then went off without a hitch.  I hope this will be helpful for others struggling with this issue that may have renamed their boot camp drives in a similar manner.

Maybe you are looking for